Hire the best freelance Simulation expert designers for your company

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

Hello, I'm Ziad Eldeeb, Iam a 21 year old, Iam from Egypt and Iam an mechanical engineering student, I am a mechanical designer, i have a 2 years of experience at 2d and 3d mechanical designs, iam an... Read more

Hello, I'm Ziad Eldeeb, Iam a 21 year old, Iam from Egypt and Iam an mechanical engineering student, I am a mechanical designer, i have a 2 years of experience at 2d and 3d mechanical designs, iam an expert at soildworks designs and static simulation, and also iam an Auto desk fusion 360 certified user, i've made projects and worked with teams as a mechanical designer, iam good with (word, Power Point and excel), and iam looking forward to make a career for myself as a mechanical designer

I'm enjoying 3D CAD Modeling, Mechanical Designs and Product Development Projects as an Engineer, Thinker, Innovative Designer, Maker and as a Freelancer. I am well trained Mechanical Design Engineer... Read more

I'm enjoying 3D CAD Modeling, Mechanical Designs and Product Development Projects as an Engineer, Thinker, Innovative Designer, Maker and as a Freelancer. I am well trained Mechanical Design Engineer with B.Sc. degree and more than 10 years’ experience in Semi-Trailer design and manufacturing field (ISO standard based) as a Design & Product Development Engineer. Also, I’m an Associate Member of Institute of Engineers Sri Lanka (AMIESL) and Associate Graduate of Engineers Australia (GradAIEAust). During my past period of work as a Mechanical Design Engineer, I have practiced to pay close attention to the following points of every project. ♦ Genuine Requirement of the Customer ♦Theoretical Limitations and Regulations ♦Complete the Project with in the stipulated time ♦Complete satisfaction of the Customer To give better output from design projects, I have gained better experience about Mechanical Engineering processes such as Metallurgy, Machining, Welding, Grinding, Sand Blasting, Steel Painting, Manufacturing Tolerances, composite material properties, Heat treatment, and other material treatment processes. My Skills: • Mechanical Designs for Products – Fresh start for the project or Based on client thoughts • Product Development- Based on client requirements • Design and Create prototypes • 3D CAD Modeling • 2D Fabrication Drawings and Drafting • Sheet metal enclosure with unfolding • FEA (Finite Element Analysis) to Identify performance and Reliability of products • Reverse Engineering • Create Project BOMs (Bill of Material) • Create Cutting Plans to reduce material usage for Manufacturing Purposes • Rendering up to 4K Quality • Create Product functioning videos • Create product catalogs and Assembly instruction procedures Special Skills: • Well experienced in Manufacturing Requirements (3D Designs, 2D Drawings, BOMs, Simulations & Rendering) in large projects including more than 100 parts. • FEA specialized in a 100T pay load semi-trailers • Realistic Rendering

I am a Mechanical Design Engineer with 10+ years of experience and a Master’s degree, specializing in mechanical parts, product development, and plastic injection mold design using SolidWorks. I deliv... Read more

I am a Mechanical Design Engineer with 10+ years of experience and a Master’s degree, specializing in mechanical parts, product development, and plastic injection mold design using SolidWorks. I deliver accurate, production-ready 3D models, assemblies, and prototypes that perform reliably in real-world conditions. My expertise includes 3D modeling, simulation, and DFM, ensuring manufacturable solutions that save time and cost. Let’s bring your concepts to life with high-quality CAD designs.

Hi! My name is Lucas Azevedo and I have a Master degree in Polymer Engineering. I´m interested in Solidworks and Moldex3D. On university I´ve worked with Solidworks, where I developed plastic parts a... Read more

Hi! My name is Lucas Azevedo and I have a Master degree in Polymer Engineering. I´m interested in Solidworks and Moldex3D. On university I´ve worked with Solidworks, where I developed plastic parts and molds. Recently in my thesis, I developed a project in Moldex3D, in order to approximate the simulation to the real process, and then for predicting injection molding deffects by analyse the moldex3D information.

Hi, I’m a mechanical and aeromechanical engineer with over several years of experience in CAD modeling, UAV design, and prototyping. I’ve worked on everything from high-speed racing drones and VTOL a... Read more

Hi, I’m a mechanical and aeromechanical engineer with over several years of experience in CAD modeling, UAV design, and prototyping. I’ve worked on everything from high-speed racing drones and VTOL airframes to precision 3D-printed assemblies and real-world flight-tested prototypes. What I Offer • UAV & Airframe Design – Structural and aerodynamic optimization for drones and small aircraft. • 3D CAD Modeling (SolidWorks, Fusion 360) – Parametric modeling, assemblies, and manufacturing-ready drawings. • Prototyping & 3D Printing – STL preparation, slicing, print testing, and fit verification on my own FDM 3D printer • Simulation & Validation – MATLAB/Simulink modeling for flight dynamics and control systems. • Embedded & Integration Work – Jetson Orin NX, Raspberry Pi, Pixhawk, Arduino, servo systems, and sensor integration. Why Clients Choose Me • Solid technical foundation with practical prototyping and manufacturing experience. • Track record of delivering functional UAV and mechanical designs for startups and research projects. • Strong communication, reliability, and full attention to detail from concept to fabrication. Let’s discuss your idea — whether it’s a custom UAV frame, precision prototype, or mechanical assembly — and turn it into a manufacturable design.

I am a dedicated Industrial Engineer with strong technical, analytical, and hands-on engineering skills. With experience ranging from workshop fabrication and welding to design, simulation, data analy... Read more

I am a dedicated Industrial Engineer with strong technical, analytical, and hands-on engineering skills. With experience ranging from workshop fabrication and welding to design, simulation, data analysis, and tutoring, I bring a balance of practical and academic expertise. I have worked on real engineering projects involving steel structures, surveying, manufacturing processes, optimisation, and system design. I am proficient in Python, CAD tools (Fusion 360, Inventor, AutoCAD), ANSYS, X-Plane simulation, and Microsoft Excel (including VBA). I have also competed in national innovation competitions—finishing 3rd in both the TCS Sustainathon (2023) and Afretech AI Competition (2023)—showing my ability to solve problems creatively and work effectively in teams. I am energetic, reliable, and committed to producing high-quality work. My strengths include communication, teamwork, strategic thinking, and the ability to turn technical concepts into real solutions.

I am a Mechanical Engineer with 5 years’ experience in Engineering company for mechanical solution in petrochemical, oil and gas, pharmaceutical, and transport equipment. Expertise software for model... Read more

I am a Mechanical Engineer with 5 years’ experience in Engineering company for mechanical solution in petrochemical, oil and gas, pharmaceutical, and transport equipment. Expertise software for modelling and simulation: - PV Elite - CAESAR ii - SolidWorks - Autodesk Inventor - Autodesk AutoCAD - AutoCAD Plant 3D - ANSYS Fluent Familiar with international standards and codes such as - ASME B31.3 - Process Piping, - ASME B31.1 - Power Piping, - ASME VIII div 2 – Boiler and Pressure Vessel, - API 610 – Centrifugal Pump, - API 660 – Shell and Tube Heat Exchanger, - TEMA 10 Some of the design projects I have completed upon have been enlisted as follows: - Design of Piping Plant for Biodiesel Plant complete with isometric drawing, and MTO. - Design of Pressure vessel such as: storage tank, filter strainer, heat exchanger. complete with calculation and designation. - Design of Transport tank such as: Aviation refueller, fuel tanker, hydrant dispenser - Simulation of CFD for wire and tube heat exchanger - Stress Analysis of Evaporation line 🔵 Expertise software for modelling and simulation: - PV Elite - CAESAR ii - SolidWorks - Autodesk Inventor - Autodesk AutoCAD - AutoCAD Plant 3D - ANSYS Fluent 🔵 I offer a variety of services: A. Pressure Vessel Design - Storage Tank - Heat Exchanger - Mixer tank / Reactor Vessel - Agitator Design - Spherical Vessel - Distillation Column - Separator B. Piping Design - Process piping - Water system - Hydraulic system C. Transport Equipment - Aviation Refueller - Fuel Tanker - Hydrant Dispenser - LPG transport - Powder Transportation - Lowbed Trailer - Wing box Trailer D. Simulation - CFD simulation for pipe - CFD simulation for airfoil - CFD simulation for external flow

3D concept design and visualization | CAD design for manufacturer | 3D reverse design from 2D cad design | 2D drawing | Sheet metal design Services: 1- 3D Modeling for 3D Printing and Prototyping. 2-... Read more

3D concept design and visualization | CAD design for manufacturer | 3D reverse design from 2D cad design | 2D drawing | Sheet metal design Services: 1- 3D Modeling for 3D Printing and Prototyping. 2- Sheet Metal Product Design 3- Motion Simulation: Assembly, operation, representation. 4- Produce working drawings, detail drawings and bills of materials for equipment, sub-assemblies or product using SolidWorks

Currently an engineer in electromechanics , i am very interested in modelling using CAD software like SolidWorks and AutoCAD.

Currently an engineer in electromechanics , i am very interested in modelling using CAD software like SolidWorks and AutoCAD.

I have 5 years of experience as a design engineer. I use SolidWorks to design and simulate. I also use ANSYS for simulation. My experiences range from creating simple and complex parts in SolidWorks... Read more

I have 5 years of experience as a design engineer. I use SolidWorks to design and simulate. I also use ANSYS for simulation. My experiences range from creating simple and complex parts in SolidWorks to assembling them and creating mechanisms. I am also good in finite elements analysis (FEA).

I’m a Mechanical Design Engineer with 4+ years of experience in special purpose machine design for the oil & gas industry, skilled in SolidWorks, Creo, and SAP/Windchill PLM systems. I specialize in 3... Read more

I’m a Mechanical Design Engineer with 4+ years of experience in special purpose machine design for the oil & gas industry, skilled in SolidWorks, Creo, and SAP/Windchill PLM systems. I specialize in 3D modeling, assembly design, detailing, and creating manufacturing drawings and BOMs. My work includes reverse engineering, GD&T, sheet metal and machined components, and selecting materials/finishes based on functionality. I actively contribute to DFM/DFA and cost optimization processes. I have strong hands-on experience with FEA and structural analysis using SolidWorks Simulation. I’ve conducted static load analysis for clamps, brackets, and support structures, delivering accurate reports with design improvements where needed. I also collaborated with a US-based client on a Life Cycle Assessment (LCA) project—creating 3D models, cleansing SAP data, updating EBOMs, and preparing for PLM migration. I’m detail-oriented, efficient, and committed to delivering practical, production-ready designs. Let’s work together to turn your ideas into reliable, manufacturable solutions.

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my... Read more

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my career to be exposed to many disciplines and master them.

Hello All, This is Akash, senior design engineer having 11 years in new product development. I had great software proficiency in Auto CAD & Solid works. Dealing with, > New product Design / develo... Read more

Hello All, This is Akash, senior design engineer having 11 years in new product development. I had great software proficiency in Auto CAD & Solid works. Dealing with, > New product Design / development against customer inputs, standards etc., > Part Modelling, Sheet metal & Plastic design, > Assembly, BOM & Drawing creation & Rendering, > Basic simulation in SolidWorks I will always be with own sincere & hardworking attitude. I am always looking & striving to do something new. Thank you.. good day to all..

Hi, I’m Mohamad, an industrial design specialist with over 10 years of experience as Head of Design & Development, and the holder of 10 registered patents. I’m an expert in SolidWorks, covering precis... Read more

Hi, I’m Mohamad, an industrial design specialist with over 10 years of experience as Head of Design & Development, and the holder of 10 registered patents. I’m an expert in SolidWorks, covering precise 3D modeling, professional drafting, analysis and simulation, assembly design, and animation creation. I deliver accurate, industry-standard output files for laser cutting, 3D printing, and CNC machining, and I have extensive experience designing and building jigs and fixtures for manufacturing. From concept to production-ready files, I bring your ideas to life with precision, innovation, and efficiency. "From concept to reality — precise and flawless!"

Mechanical Design Engineer | SolidWorks Expert | FEA, CFD & IoT Product Development Specialist I help startups, manufacturers, and product companies transform concepts into production-ready products... Read more

Mechanical Design Engineer | SolidWorks Expert | FEA, CFD & IoT Product Development Specialist I help startups, manufacturers, and product companies transform concepts into production-ready products through engineering-driven design, simulation, optimization, and prototyping. With a Bachelor's Degree in Mechanical Engineering, a specialized Diploma from the Indo-German Tool Room (IGTR), and over 6 years of industrial experience, I provide end-to-end product development services covering mechanical design, engineering analysis, fabrication engineering, embedded systems, and IoT-enabled solutions. My unique strength lies in combining advanced CAD design, simulation, manufacturing knowledge, and electronics integration to develop products that are innovative, lightweight, reliable, and ready for real-world production. --Core Engineering Services ---Mechanical Product Design & Development I specialize in transforming ideas into manufacturable products through structured engineering processes and design-for-manufacturing principles. Services include: * New Product Development (NPD) * Concept Design & Engineering * Mechanical System Design * Reverse Engineering * Design for Manufacturing (DFM) * Design for Assembly (DFA) * Fabrication-Oriented Design * Product Optimization * Prototype Development Support * Manufacturing Documentation --- --- SolidWorks Design Expertise Advanced proficiency in: * Part Modeling * Surface Modeling * Sheet Metal Design * Weldment Structures * Complex Assemblies * Parametric Design * Manufacturing Drawings * Assembly Drawings * Bill of Materials (BOM) * Motion Studies * 3D Rendering Deliverables include production-ready STEP, IGES, STL, DXF, DWG, PDF, and native SolidWorks files. --- --- Furniture, Caravan & Mobile Living Systems I specialize in engineering products where space optimization, weight reduction, durability, and manufacturability are critical. Applications include: * Luxury Caravans * Camping Trailers * Mobile Homes * Food Trucks * Mobile Kitchens * Mobile Offices * Custom Vehicle Interiors * Modular Furniture Systems * Commercial Furniture Products My designs focus on maximizing usable space while maintaining structural integrity and manufacturing efficiency. --- --- Engineering Analysis, Simulation & Optimization I use simulation-driven engineering to validate designs before fabrication, helping clients reduce development costs, minimize prototype iterations, and improve product performance. ---- Finite Element Analysis (FEA) * Static Structural Analysis * Stress & Strain Analysis * Fatigue Assessment * Buckling Analysis * Modal Analysis * Vibration Analysis * Weldment Validation * Frame Structure Analysis ---- Computational Fluid Dynamics (CFD) * Aerodynamic Studies * Internal & External Flow Analysis * Pressure Distribution Analysis * Heat Transfer Studies * Cooling System Design * Airflow Optimization * Thermal Performance Evaluation ---- Optimization for Analysis (OfA) * Topology Optimization * Weight Reduction Studies * Structural Optimization * Material Utilization Improvement * Performance Optimization * Design Validation & Iteration These techniques enable lighter, stronger, and more cost-effective products without compromising performance. --- --- UAV, Drone & Aerospace-Oriented Engineering Experience in the engineering and optimization of surveillance drones and UAV platforms. Capabilities include: * Airframe Design * Structural Validation * Aerodynamic CFD Analysis * Payload Integration * Weight Optimization * Flight-Endurance Improvement * Component Packaging * Prototype Development Support --- --- IoT Design & Development I develop complete electro-mechanical products by integrating mechanical systems, electronics, embedded programming, automation, and cloud connectivity. Capabilities include: * ESP32 Development * Arduino-Based Systems * Embedded Firmware Development * Sensor Integration * Wireless Communication Systems * Wi-Fi * Bluetooth * GSM/4G * LoRa * Remote Monitoring Solutions * Industrial Automation Systems * IoT Dashboard Integration * Smart Product Development --- --- Featured Project: Autonomous Solar Panel Cleaning Robot Designed, engineered, fabricated, programmed, and tested a fully autonomous solar panel cleaning robot developed for solar energy installations. Project scope included: * Complete SolidWorks Mechanical Design * Structural Optimization * Cleaning Mechanism Development * Chassis & Drive System Design * Embedded Control System Development * ESP32 Firmware Programming * Sensor Integration * Autonomous Navigation Logic * Battery & Power Management * IoT-Based Monitoring & Control * Prototype Fabrication & Field Testing The solution improves solar panel efficiency by automating cleaning operations while reducing labor requirements, maintenance costs, and water consumption. This project demonstrates my ability to deliver complete multidisciplinary products from concept to fun

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surrounding... Read more

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surroundings quickly. I am always ready for new and exciting challenges that will allow me to apply my knowledge and abilities that I have gained through my studies and work experience. I strive for personal skill development and ensure that I keep improving my existing skills while constantly learning new skills. In my current position I am greatly exposed and experiencing the engineering aspect of providing functional products to international clients. I am heavily involved in research and development of new innovative products as well as working on the improvement of current products, utilizing testing results and simulations to enhance the performance and reliability of the products. Our products performing vital roles in the safety and protection of equipment and people we have to adhere to strict codes, regulations and procedure, each teaching me essential skills required in any engineering field. In my previous position I specialize in metrology solutions, undergoing training in GOM precision scanning as the main field of expertise. I also have come to terms with dealing with clients and providing them with solutions that satisfy their needs and requirements. Throughout my course work at the University and concurrent part time work, I have acquired a sound and overall knowledge accompanied with several professional skills related to leading edge engineering principals, tools and practices with emphasis on designing, building and testing of mechanical systems. I am proficient in the use of various automated solutions including current releases of Solidworks, Ansys and Star CCM+ as well as a variety of engineering machining tools.

I am Mechanical Engineer with a passion of Designing and Simulation,I learned different CAD software during my bachelors degree and want to use the knowledge of designing in freelancing. I am offerin... Read more

I am Mechanical Engineer with a passion of Designing and Simulation,I learned different CAD software during my bachelors degree and want to use the knowledge of designing in freelancing. I am offering designing and simulation services for all cases, particularly for manufacturing and optimization of product with material science. Thanks

I am a student of Mechanical Engineering. I am working in a Student Formula team as senior Automotive Designer. I am specially expert in CAD designing and simulation. Besides I am also expert in rende... Read more

I am a student of Mechanical Engineering. I am working in a Student Formula team as senior Automotive Designer. I am specially expert in CAD designing and simulation. Besides I am also expert in rendering and 3D animation. I like to work in Solidworks and for animation and rendering i like Blender and Keyshot. For simulation and analysis I use ANSYS, Solidworks simulation and Matlab simulink and simscape. I have got two awards from my university for CAD designing, one of them is champion and another is 2nd runner up. I have participated in Formula Student Japan 2017 with my team where i am working as an automotive designer. I have also worked in ▒▒▒▒▒▒ as a freelancer. Over all I am a young, energetic, passionate but experienced designer. I am committed to my clients. I like to work as per project and submit the project as soon as possible with satisfying quality.

Growing up in an advanced mult-axis CNC machine shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theor... Read more

Growing up in an advanced mult-axis CNC machine shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theory and deep experience in the hands on / real world aspects of how precision industrial, medical, food processing, commercial, aerospace and consumer product products are conceptualized, prototyped and later produced and sourced. I have substantial experience in multi-axis CNC programming for high-speed, horizontal and vertical milling centers as well as multi-axis Swiss lathes (Citizen) via Mastercam. I am very well versed in a variety of materials and have years experience programming complex, multi-surfaced components to simple components, for short run prototypes, high speed, long run production and high-confidence lights out operations. In addition I have many years experience in CAD modeling and design via Solidworks 2018 including part, assembly and prints of which I also own one seat of latest 2018 version including Solid Works Simulation and the new, very impressive Solid Works Visualize. With Visualize I have the ability to not only design full solid models and assemblies but also create incredible, rendered real world pictures and images. I have designed, prototyped, sourced and brought to market several products from the ground up in various market segments including industrial, medical, food processing and aerospace. (including sheet metal, injection molded parts and of course precision machined parts with very tight tolerances). I currently own a Okuma MB-4000H Multi-Axis Horizontal Milling Center in which I can complete advanced protoypes to high speed, long run production runs. I am very confident that my education, real world experience and upbringing in a CNC environment has given me the ability to not only boldly design and or program components and products with disruptive, world class mechanical characteristics, it has given me the hands on experience to also design within the mindset of key variables like machine-ability and optimal material selection as this directly relates to final product cost. I have deep experience in optimization of solid model product design for machining and injection molding as well. I also hold several patents within the industrial and packaging spaces. I welcome any inquiry, as someone that truly enjoys this innovative space, I take projects with the assumption as if they were my own products. I embrace deep communication and work with the latest versions of all software I am versed in, with a deep emphasis on leveraging the amazing digital world we live in. I am willing to negotiate hourly rate based on the project.

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

Highly experienced Engineer with over a decade of expertise in rail infrastructure, vehicle dynamics, and project management. Possessing a PhD in Civil Engineering. Researcher with skills including cr... Read more

Highly experienced Engineer with over a decade of expertise in rail infrastructure, vehicle dynamics, and project management. Possessing a PhD in Civil Engineering. Researcher with skills including creating 3D models of vehicle elements and multi-body simulation (MBS) models of entire vehicles. Expertise includes rolling stock modeling, such as analyzing safety, ride quality and noise/vibration levels.

I’m a Mechanical and Railway Systems Engineer and a registered Graduate Engineer . I enjoy helping people turn ideas into practical reliable and manufacturable mechanical designs. My focus is always o... Read more

I’m a Mechanical and Railway Systems Engineer and a registered Graduate Engineer . I enjoy helping people turn ideas into practical reliable and manufacturable mechanical designs. My focus is always on safe, efficient and cost-effective solutions that make sense for your project. How I can help you: -Mechanical product and system design -3D CAD modeling in SolidWorks -FEA and CFD analysis -Design for Manufacturability (DFM) -Technical drawings and documentation -Improving existing designs for reliability and maintenance My experience includes: -Supporting mechanical product and process design at Thermoflow Engineering Limited, working on manufacturable and standards-compliant solutions. -Maintaining and repairing locomotives and railway equipment at Tanzania-Zambia Railway Authority (TAZARA), including machining, fabrication, diagnostics and safety improvements. -Inspecting and maintaining fire safety systems in industrial facilities to meet safety regulations. Projects I’ve worked on: -Six Degrees of Freedom (6-DOF) Desktop Robotic Arm: Designed a desktop robotic arm in SolidWorks for educational applications, with a payload capacity of ~1 kg and a reach of ~320mm. Conducted kinematic simulations and FEA analysis to evaluate joint performance, link strength and structural stability. Applied Design for Manufacturability (DFM) principles for cost-effective fabrication using 3D-printed and lightweight components. -Automatic Whiteboard Cleaner: Designed, analyzed, fabricated and integrated electronics for smooth and reliable operation. -Maize Grinding Machine: Designed and analyzed components to improve efficiency and reduce power consumption.

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

Mechanical Industrial Design Engineer -------------------------------------------------------------------- HI, Myself,Balram Sharma,working as Freelance Mechanical 3D Designer.I worked in many compan... Read more

Mechanical Industrial Design Engineer -------------------------------------------------------------------- HI, Myself,Balram Sharma,working as Freelance Mechanical 3D Designer.I worked in many companies in R&D Deptt. as a Design Engineer during my Industrial Journey. - I am a Skilled freelance Mechanical 3D designer with over 6.5+ year of experience in the Designing field. Dedicated to staying up-to-date on new techniques and procedures related to Mechanical 3D design. Excel at Using various software like Solidworks, Solidedge,AutoCAD and Creo Parametric. Managed multiple projects simultaneously. Excellent communicator able to work as part of a team or as the sole designer. - Technical knowledge of many software programs, such as Solidworks,Solidedge,AutoCAD and Creo Parametric.Can also work on Catia and Unigraphics.Strong communication skills allow me to understand what customer is looking for. -Excel at identifying problems and finding various solutions to fix the issue.Work well in a fast-paced and ever-changing environment.Self-discipline ensures I finish my work on time no matter how many projects I’m working on.I'm a Creative thinker able to come up with unique, clever ideas for logo design 3D. Can be available for you anytime,anywhere to solve your query related to CAD Design and any Mechanical Subject.I think bond between the Professional people's must be so strong that whenever there will be a problem,all must be come together to tackle the Problem. I,myself,as a sole Designer has given successful real working design of Internal Combustion Engine(Single Cylinder), Gear, Diggi Lock Cover, a Piston and a Crankshaft for Radial Engine(IC).I also provided design for a Rock Crawler Toy Machine for a Toy making Company. Thank you for consideration! Thank You again, Balram Sharma

Mechanical Design Engineer (13 Years+ Ex.) |DESIGN Expertise in Product Design. Design and Development, Whatever You Think About Product I Will Create.| Imagination to Design Conversion. I have a Dyna... Read more

Mechanical Design Engineer (13 Years+ Ex.) |DESIGN Expertise in Product Design. Design and Development, Whatever You Think About Product I Will Create.| Imagination to Design Conversion. I have a Dynamic Profile with an Excellent Blend of Parts & Assembly CAD Design, Qualified BE Mechanical and Great Knowledge of the Design of Mechanical And CAD Modelling. For Designing I Use TOP RATED Software Like Solid Works, Autodesk Inventor, AutoCAD, and Creo Parametric. | Analysis and simulation of Product I use ANSYS. Extensive CAD proficiency in modeling with the part, Assembly, Sheet Metal, Weldments, Mold, Surface & Design Table, and modules using SolidWorks, AutoCAD, Inventor & Creo2.0. I have worked on 3D Printing modeling. I can create a 3D Model for 3D printing with the maintain accurate thickness. Proficient user of: - Creo Parametric - 3D modeling, assemblies, weldment, sheet metal, drafting. - SolidWorks - 3D modeling, assemblies, weldment, sheet metal, drafting, simulation, motion... - Autodesk Inventor - 3D modeling, assemblies, weldment, sheet metal, drafting. - ANSYS - FEA Analysis, Fatigue test, - Autodesk AutoCAD Development, Manufacturing & prototype Modelling, General Arrangement Layouts, P & ID, Create a new design/drawing by measuring the objective (Reverse Engineering ). Comprehensive knowledge of computer-aided engineering (CAD Design software) and GD&T. I demonstrated the ability to resolve a variety of issues and New Developments. (Such as High-Pressure triplex plunger pump, Food processing machinery, Bus Body structure and Pressure Vessels). In addition to this experience, I gained considerable Mechanical design and product development skills. I have also gain CAD Software skills (Like Solid-works, Inventor, Creo & AutoCAD) I have worked within four high-volume Mechanical companies as a Mechanical Design Engineer. I also bring to the table strong computer proficiencies in MS Word, MS Excel applications. Please see the accompanying resume for details of my experience and education. I am confident that I can offer you the new development, Modifications, CAD Software skills you are seeking.