Hire the best freelance Fluid Dynamics expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I am a Mechanical Engineer specializing in high-end 3D technical animation and industrial visualization. I bridge the gap between heavy engineering data and clear, cinematic video content. Because of... Read more

I am a Mechanical Engineer specializing in high-end 3D technical animation and industrial visualization. I bridge the gap between heavy engineering data and clear, cinematic video content. Because of my engineering background, I do not just animate surfaces; I understand the actual physics, gear modules, and fluid dynamics behind your designs. Whether it is breaking down the internal mechanics of a large-scale wind turbine or detailing the precise timing angles of a reciprocating diesel engine, I ensure every moving component is mathematically and physically accurate. I take raw CAD assemblies or blueprints and transform them into photorealistic, fully rigged 3D models. My multi-pass rendering workflow ensures a premium commercial finish that is perfect for investor pitches, technical training, or product marketing.

*** What we do? *** 1/ Finite Element Analysis (FEA): - Predict product behavior through linear, nonlinear, thermal, and dynamic analyses - Estimate fatigue life and fracture propagation of produc... Read more

*** What we do? *** 1/ Finite Element Analysis (FEA): - Predict product behavior through linear, nonlinear, thermal, and dynamic analyses - Estimate fatigue life and fracture propagation of product - Analyse weld fatigue, vibration fatigue, low/high cycle fatigue, and composite fatigue - Optimise designs and validate product performance before production 2/ Computational Fluid Dynamics (CFD): - Inspect fluid flow, air flow, free surface flows (multiphase) - Analyse thermal management and heat transfer - Turbomachinery, turbulence and combustion - Fluid-Structure Interaction (FSI) and thermal FSI - Make faster and better decisions in the product development process 3/ Consulting Services: - Provide specialised solutions to engineering problems ranging from basic to complex analyses in the areas of structural analysis and fluid dynamics, applied mechanics and heat transfer. - Additional services include design verification/auditing, new product R&D, physics calculations. *** Why choose us? *** Our qualified services are the result of years of scientific study and international working experiences. The owner and experienced engineer, Tri Tien (Tri is pronounced as Tree), has more than 10 years in simulation and manufacturing industries, both in Australia and overseas. Before starting CAEbay, Tri had previously performed various roles as technical engineer, production & development engineer, and engineering head for many companies covering a range of industries including mechanical simulation, composite manufacturing, wood machining and fitness equipment manufacturing. Tri holds a Bachelor of Automotive and Engine Engineering from Ho Chi Minh City University of Technology, a Masters of Science from Konkuk University South Korea, and a PhD in Computational Engineering from University of Southern Queensland. Tri has published more than 15 peer-reviewed international journal articles and conference papers in the area of computational engineering. "CAE only delivers meaningful results if the engineer driving the computer fully understands the theory behind the simulation." *** What clients say? *** “It became clear that Tri has an unusual ability to computer model both physical objects and processes involving thermodynamics, movements of fluids and combinations of these.” Director Cliff Walker, Vacmobiles.com ltd., New Zealand. “We encountered some serious failure problems that halted our sales. Tri quickly identified the cause of the failures and invented a fail-safe substitution that allowed us to resume sales.” Thomas R. Anthony Ph.D, NAE., America. “With a very tenacious and robust problem solving ability, Tri was able to apply a deep technical knowledge into an array of projects to improve both existing systems along with the research into new areas of possible business.” David Pring, Managing Director, Timber and Laminate Services Pty Ltd., Australia.

Mechanical Design Engineer | SolidWorks Expert | FEA, CFD & IoT Product Development Specialist I help startups, manufacturers, and product companies transform concepts into production-ready products... Read more

Mechanical Design Engineer | SolidWorks Expert | FEA, CFD & IoT Product Development Specialist I help startups, manufacturers, and product companies transform concepts into production-ready products through engineering-driven design, simulation, optimization, and prototyping. With a Bachelor's Degree in Mechanical Engineering, a specialized Diploma from the Indo-German Tool Room (IGTR), and over 6 years of industrial experience, I provide end-to-end product development services covering mechanical design, engineering analysis, fabrication engineering, embedded systems, and IoT-enabled solutions. My unique strength lies in combining advanced CAD design, simulation, manufacturing knowledge, and electronics integration to develop products that are innovative, lightweight, reliable, and ready for real-world production. --Core Engineering Services ---Mechanical Product Design & Development I specialize in transforming ideas into manufacturable products through structured engineering processes and design-for-manufacturing principles. Services include: * New Product Development (NPD) * Concept Design & Engineering * Mechanical System Design * Reverse Engineering * Design for Manufacturing (DFM) * Design for Assembly (DFA) * Fabrication-Oriented Design * Product Optimization * Prototype Development Support * Manufacturing Documentation --- --- SolidWorks Design Expertise Advanced proficiency in: * Part Modeling * Surface Modeling * Sheet Metal Design * Weldment Structures * Complex Assemblies * Parametric Design * Manufacturing Drawings * Assembly Drawings * Bill of Materials (BOM) * Motion Studies * 3D Rendering Deliverables include production-ready STEP, IGES, STL, DXF, DWG, PDF, and native SolidWorks files. --- --- Furniture, Caravan & Mobile Living Systems I specialize in engineering products where space optimization, weight reduction, durability, and manufacturability are critical. Applications include: * Luxury Caravans * Camping Trailers * Mobile Homes * Food Trucks * Mobile Kitchens * Mobile Offices * Custom Vehicle Interiors * Modular Furniture Systems * Commercial Furniture Products My designs focus on maximizing usable space while maintaining structural integrity and manufacturing efficiency. --- --- Engineering Analysis, Simulation & Optimization I use simulation-driven engineering to validate designs before fabrication, helping clients reduce development costs, minimize prototype iterations, and improve product performance. ---- Finite Element Analysis (FEA) * Static Structural Analysis * Stress & Strain Analysis * Fatigue Assessment * Buckling Analysis * Modal Analysis * Vibration Analysis * Weldment Validation * Frame Structure Analysis ---- Computational Fluid Dynamics (CFD) * Aerodynamic Studies * Internal & External Flow Analysis * Pressure Distribution Analysis * Heat Transfer Studies * Cooling System Design * Airflow Optimization * Thermal Performance Evaluation ---- Optimization for Analysis (OfA) * Topology Optimization * Weight Reduction Studies * Structural Optimization * Material Utilization Improvement * Performance Optimization * Design Validation & Iteration These techniques enable lighter, stronger, and more cost-effective products without compromising performance. --- --- UAV, Drone & Aerospace-Oriented Engineering Experience in the engineering and optimization of surveillance drones and UAV platforms. Capabilities include: * Airframe Design * Structural Validation * Aerodynamic CFD Analysis * Payload Integration * Weight Optimization * Flight-Endurance Improvement * Component Packaging * Prototype Development Support --- --- IoT Design & Development I develop complete electro-mechanical products by integrating mechanical systems, electronics, embedded programming, automation, and cloud connectivity. Capabilities include: * ESP32 Development * Arduino-Based Systems * Embedded Firmware Development * Sensor Integration * Wireless Communication Systems * Wi-Fi * Bluetooth * GSM/4G * LoRa * Remote Monitoring Solutions * Industrial Automation Systems * IoT Dashboard Integration * Smart Product Development --- --- Featured Project: Autonomous Solar Panel Cleaning Robot Designed, engineered, fabricated, programmed, and tested a fully autonomous solar panel cleaning robot developed for solar energy installations. Project scope included: * Complete SolidWorks Mechanical Design * Structural Optimization * Cleaning Mechanism Development * Chassis & Drive System Design * Embedded Control System Development * ESP32 Firmware Programming * Sensor Integration * Autonomous Navigation Logic * Battery & Power Management * IoT-Based Monitoring & Control * Prototype Fabrication & Field Testing The solution improves solar panel efficiency by automating cleaning operations while reducing labor requirements, maintenance costs, and water consumption. This project demonstrates my ability to deliver complete multidisciplinary products from concept to fun

We are Team Of Four Members having 3ys of Experience in Design and Manufacturing. you can find our company website below. https://anadessolutions.wixsite.com/website Strong Knowledge on 3D Mod... Read more

We are Team Of Four Members having 3ys of Experience in Design and Manufacturing. you can find our company website below. https://anadessolutions.wixsite.com/website Strong Knowledge on 3D Modelling, Detailing for Manufacturing, Computer Aided Engineering . Good Hand Full of knoeledge on Giving Technical Suggestions on Mechanical, Aero Space and Auto Motive Systems. Have Good Industrial Working and Reserch Knowledge on Various CAD and FEA Packages like Auto Cad, Catia V5, Solid Works, UniGraphics and Ansys Structural and Fluid Dynamics. I have worked as a Design engineer for a period of 1 year 3 moths were I used to develop 3D Models and Detailing for the Auto Motive and Mechanical Industries. I used to Give the Technical Suggestions Based on the Problem Arised for the Food Processing and Food Storage Industries with Suitable Equipment Design and drafting to store and Supply the food. While Giving the Technical Solutions I used to Do FEA Analysis in Ansys To Study the PlM of the Suggested Technology to the Customers. People Can Find My Excuted Projects In this Term. 1. I have designed a food trolly to store and supply the food in Hospitals. The system contains a freezer to freez the food and a heater to heat the food and it can be operated by two men. It has provided the trays to place the food followed by two compartments with minimum gap to circulate the air to freez and heat the food. It has Provided two way doors to operate in either Directions and Provided the Detailing for the Whole Technology it took 45hrs. 2. I have done another project on Reverse Engineering on Two Car Models were I have designed The car Domes in Catia Surfacing and Successfully Excuted The Aerodynamics Studies On the Models these results are requested by the customers to use for the validation. It Has Taken totally 300hrs In the Design Phase and Another 200hrs in the FEA Phase. 3. I have done one more Project on Creating Standerd Test Pieces to use in the Prototype testing were I have designed the models in Catia and they have sent to 3D Printing with Compleate Detailing after the Prototype Testing results were Extracted from the Test and Validated in The Ansys To study their Mechanical Properties For the Composite AlSic MMC Total 400hrs has taken to provide compleate validation to the customer. 4. Another Project Has Excuted on Plant Layout. A Plant Layout Has Created In Catia To Provide the Food Processing Layoutto the Customer. Compleate Lay out Has Delivered to the Customer With in 200hrs. 5. I have excuted project which has taken 6moths. Were I have managed a team of 11members designers and Draft mans to design and to provide Detailing to Couple of Manufacturing Machianary to change their Size and to convert them into Indian Standers. We have Excuted the Whole Project In 3Phases in first Phase All Assembly Componets were created with Compleate Detailing in second Phase Sub Assembly Drawings were Created with their Cad Model with the Sap Numbers to the All Componets with Compleate BOM Creation in the Third Phase All Sub Assemblies were Assembled and created a Final Product with Compleate Detailing. These are the major Projects I Have Excuted In this Term. After this I have Worked as Freelancer till March 2018 In providing Technical Solutions and to provide Detailing for the Manufacturing Units. Now I am Working As a Design Engineer in Oil And Gas Domain to provide the Solutions for Onsite Coordinators to Design and Detailing For the Systems which are used in the Oil and Gas Fields.

I am a mechanical design engineer. I work on projects involving 3D modeling, structural and thermal analysis, CAD automation, CAD documentation, piping assembly design, consumer product design and mac... Read more

I am a mechanical design engineer. I work on projects involving 3D modeling, structural and thermal analysis, CAD automation, CAD documentation, piping assembly design, consumer product design and machine parts design. Working systematically and productively is integral part of my profession. My experience involves designing machine components on the basis of stringent norms and international standards. I have worked with overseas peers and am quite flexible working in intercultural environment. I am Bachelor of Technology in Mechanical Engineering from DDU - one of the esteemed universities in Gujarat. I started to incline towards designing right since 2nd semester. My dedication helped me to gain professional experience in the field of engineering services using CAD and programming tools. Today I am chiseled to fulfill variety of engineering problems.

As a dedicated Mechanical Engineer with over 5 years of industry experience, I have delivered more than 200 successful projects, turning innovative ideas into high-performance solutions across diverse... Read more

As a dedicated Mechanical Engineer with over 5 years of industry experience, I have delivered more than 200 successful projects, turning innovative ideas into high-performance solutions across diverse sectors. My expertise spans CAD design, advanced simulations, and complex problem-solving, allowing me to tackle a wide range of engineering challenges with precision, creativity, and passion. CAD Design and 3D Modeling My proficiency in CAD design is deeply rooted in SolidWorks, where I specialize in creating detailed 3D models, assemblies, and technical drawings for manufacturing, prototyping, and product development. Whether you're looking for conceptual designs, product development, or fully engineered parts ready for production, I ensure that every model is meticulously crafted to meet industry standards and client requirements. Some of my key CAD projects include: High-Efficiency Glass Shredders: I designed and manufactured custom glass shredders for waste management, incorporating precision engineering with durable materials for long-lasting performance. 3-Axis to 5-Axis CNC Conversion: I successfully upgraded a client's 3-axis CNC machine to a 5-axis, enabling more complex machining tasks while maintaining precision and reliability. Solar-Assisted Wheelchair Design: This project involved the full CAD design and rendering of an innovative solar-assisted wheelchair, featuring a 5-hour battery backup and a speed of 12 km/h. These projects showcase my ability to deliver on highly technical and customized design requirements while ensuring functionality, durability, and aesthetic appeal. Advanced Simulations and Analysis I am highly skilled in performing advanced simulations using ANSYS Fluent and SolidWorks Flow Simulation. My expertise in CFD (Computational Fluid Dynamics) allows me to optimize designs for performance and efficiency, whether you're dealing with fluid dynamics, heat transfer, or complex multi-phase flows. Here are a few highlights from my simulation projects: Mixing Tank Simulations: I have conducted multiple advanced mixing tank simulations, focusing on improving mixing efficiency by optimizing blade placement and tank geometry. This includes high-viscosity fluid and solid particle mixing, delivering enhanced performance for industrial applications. Turbomachinery and Aerodynamics: I have completed aerodynamics and turbomachinery simulations to analyze and optimize airflow, minimizing drag, and increasing the efficiency of rotating machinery and automotive components. Thermal Mixing and Heat Exchangers: My work on thermal mixing and helical coil heat exchangers involves comprehensive CFD simulations to evaluate temperature distribution, pressure drop, and thermal efficiency, ensuring optimal heat transfer for industrial systems.

I am passionate about design and aeronautics, I grew up close to Fabrica Militar de Aviones in Cordoba, Argentina. I currently dedicate my time to work in a Renault assembly plant and lead a team of... Read more

I am passionate about design and aeronautics, I grew up close to Fabrica Militar de Aviones in Cordoba, Argentina. I currently dedicate my time to work in a Renault assembly plant and lead a team of aeronautical engineers, electrical engineers, mechanical engineers and CAD experts that work in multiple projects around the world. I can tackle complex design projects from conception to final design and execution. My and my team's experience covers the use of CAD, CATIA and the simulation of interactions of all disciplines of physics, structural, vibration, fluid dynamics, heat transfer and electromagnetic, especially in the aeronautics world. I can design pieces for engines, structural components, new product design, among others. I am based out of Cordoba, the base of the aeronautical and automotive industry in Argentina that includes the design and manufacture of the A-63 Pampa, an advanced jet trainer with combat capability, produced in Argentina with assistance from Dornier of Germany. I am able to fulfill projects on time, high accuracy, and at affordable rates. My passion is to deliver the best quality.

I am a skilled Mechanical Design Engineer, knowledgeable in the area of product design, product analysis and sales. Trained in Computer Aided Design and Manufacturing (CAD/CAM) with keen interest a... Read more

I am a skilled Mechanical Design Engineer, knowledgeable in the area of product design, product analysis and sales. Trained in Computer Aided Design and Manufacturing (CAD/CAM) with keen interest and tangible understanding in the fields of Structural mechanics, heat and mass transfer, and Computational Fluid Dynamics( CFD), GDnT, DFMA and product visualisation. Proficient in the use of laser scanning technology, 3D printing and Reverse engineering Possessing a good team spirit, leadership abilities, presentation skills and firm believer and practitioner of research and development for developing better products.

I believe that a solution should be simple and cheap, even for a complicated problem. With experience in mechanical design, CAD solid design, gear transmission, chain transmission, HVAC equipment, pip... Read more

I believe that a solution should be simple and cheap, even for a complicated problem. With experience in mechanical design, CAD solid design, gear transmission, chain transmission, HVAC equipment, pipes, ducts, heat transfer, thermodynamics, fluid mechanics and FEM analysis, I am able to provide engineering solution in many different fields. I am also familiar with basic electricity, electronics, control systems, and can write basic code in C language or MATLAB. On a personal note, I take great interest in new developing technologies and high-tech products. I also have hobbies like playing the electric guitar (and music in general), motorsport and cooking.

I'm Muhammed, a Top-Rated Electromechanical & Product Design Engineer with 100% Job Success across 52+ completed projects on ▒▒▒▒▒▒. I specialize in taking consumer electronics and complex hardware pr... Read more

I'm Muhammed, a Top-Rated Electromechanical & Product Design Engineer with 100% Job Success across 52+ completed projects on ▒▒▒▒▒▒. I specialize in taking consumer electronics and complex hardware products from concept to fully manufacturable reality. Core Services: Mechanical & Industrial Design — Advanced CAD modeling, organic surface design, and physics-driven enclosure engineering using Siemens NX, SolidWorks, and Fusion 360. Mostly focused on design of consumer products and design for manufacturing. Electronics & PCB Design — Schematic capture and PCB layout using KiCad and EasyEDA; production-ready Gerbers, BOMs, and component sourcing for rapid prototyping. CFD & FEA Simulation — Fluid dynamics, thermal distribution, and structural analysis using Ansys Fluent and Siemens Nastran to validate designs before physical prototyping. Design for Manufacturing (DFM) — Injection-molding ready parts, snap-fits, CNC fixtures, casting molds, and assemblies optimized for mass production. Prototyping & Reverse Engineering — 3D scanning, STL-to-STEP conversion, additive manufacturing, and iterative electromechanical validation. As a PhD candidate in CFD at KAUST and former thermo-fluids researcher at Istanbul Technical University, I combine deep physics understanding with real factory-floor manufacturing knowledge. I bridge the gap between custom PCB electronics and physical enclosures — ensuring perfect integration of components, battery fitment, and mechanical sealing. Software: Siemens NX · SolidWorks · Autodesk Fusion 360 · SpaceClaim · KiCad · EasyEDA · Ansys Fluent · Siemens Nastran · Blender Let's bring your hardware product to life — from rough sketch to ready-to-manufacture files.

I am a results-driven Mechanical Engineer (5yrs experience) with strong expertise in AutoCAD, Creo (Parametric), ANSYS, technical report writing, and SCADA/industrial support. I help manufacturers, en... Read more

I am a results-driven Mechanical Engineer (5yrs experience) with strong expertise in AutoCAD, Creo (Parametric), ANSYS, technical report writing, and SCADA/industrial support. I help manufacturers, engineering firms, and startups convert concepts into accurate designs, validated simulations, and clear technical documentation that meet real-world engineering and manufacturing standards. With hands-on experience in mechanical design, analysis, and industrial systems, I focus on precision, compliance, and performance not just visuals. ⭐ Computational Fluid Dynamics (CFD) ⭐ Finite Element Analysis (FEA) ⭐ Product Design & 3D Rendering ⭐ 3D Modeling and CAD Design ⭐ HVAC System Design & Heat Load Calculation ⭐ MATLAB Development I specialize in delivering high-quality engineering solutions tailored to meet the specific requirements of each project. My focus is on combining advanced simulation, innovative design, and precise engineering analysis to help clients develop efficient and reliable products. My Expertise Includes ⭐ CFD simulations for aerodynamics and HVAC systems ⭐ Thermal and fluid flow analysis for Heating, Ventilation, and Air Conditioning applications ⭐ Green building and energy-efficient system design ⭐ MATLAB development and numerical modeling ⭐ Engineering simulation using advanced tools ⭐⭐⭐ Why Choose Me? ⭐⭐⭐ ✅ Proven Experience: Successfully completed 5yrs+ in engineering projects across multiple industries. ✅ Industry Standards Expertise: I design and analyze systems following international engineering standards and codes, including: • ASTM Standards • ANSI Codes • Compliance with USA and UK engineering standards ✅ Comprehensive Engineering Services: • FEA and CFD Simulation • Product Design & Development • Engineering & Reverse Engineering • Production, Assembly, R&D, and Testing • 2D/3D Technical Drawings and Drafting • Visualization and Prototyping • CNC Manufacturing and 3D Printing If you are looking for an engineer who provides innovative solutions, precise simulations, and reliable designs, I would be happy to collaborate and bring your ideas to life. Tools & Technologies ANSYS | ANSYS Fluent | ANSYS CFX | COMSOL Multiphysics | SolidWorks | CAD/CAM | MATLAB | ANSYS Discovery Live

I specialize in product design, 3D modeling, rendering, and simulation. I am passionate about transforming concepts into high-quality, manufacturable products using advanced CAD software like SolidWor... Read more

I specialize in product design, 3D modeling, rendering, and simulation. I am passionate about transforming concepts into high-quality, manufacturable products using advanced CAD software like SolidWorks, AutoCAD, and Autodesk fusion 360. My expertise extends to FEA (Finite Element Analysis) and CFD (Computational Fluid Dynamics) simulations, ensuring that designs are not only visually appealing but also optimized for performance and efficiency. I have a keen eye for detail, enabling me to create realistic renders that bring designs to life and communicate ideas clearly. Whether it's creating complex assemblies, designing mechanical components, or conducting virtual testing and analysis, I am dedicated to delivering solutions that meet both aesthetic and functional requirements. Let’s collaborate to turn your ideas into reality with precision and creativity!"

Hi I'm Allan Paul Valera a Mechanical Engineer, Certified Solidworks Expert with Finite Element Analysis,Computational Fluid Dynamics and Plastic Injection Simulation Experienced. I have gained e... Read more

Hi I'm Allan Paul Valera a Mechanical Engineer, Certified Solidworks Expert with Finite Element Analysis,Computational Fluid Dynamics and Plastic Injection Simulation Experienced. I have gained extensive experience in design having worked as Mold Design Engineer, which has benefited me greatly in terms Product Development, Fabrication and Mold Design. I am now currently working as a Application Engineer in a Solidworks Reseller company which have furthered my skills not only in design but also in simulation and other solidworks multi-product solutions.

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different proje... Read more

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different projects with Robert Bosch GmbH company. I have a broad range of skills in Computer-Aided Design (CAD), Computational Fluid Dynamics (CFD), and Finite Element Analysis (FEA). I am proficient at COMSOL, ANSYS, Abaqus, SolidWorks, CATIA V5, Inventor, AutoCAD MEP, Revit, Pro/E [Creo], Matlab, Simulink, Python, Matlab LiveLink, Mathematica, and Dualfoil. SolidWorks Certifications: -Associate and Professional in Mechanical Design (CSWA and CSWP). Please Visit My Portfolio: https://drive.google.com/file/d/1mIvxhUFDAw-8TxiUwuxsUn_8ZLm3oECV/view?usp=sharing

CAD Designer | Mechanical Engineer | CFD & FEA Specialist Hi, I’m Habib, an undergraduate mechanical engineer with a strong command of SolidWorks, Fusion 360, and AutoCAD. I specialize in 3D CAD mod... Read more

CAD Designer | Mechanical Engineer | CFD & FEA Specialist Hi, I’m Habib, an undergraduate mechanical engineer with a strong command of SolidWorks, Fusion 360, and AutoCAD. I specialize in 3D CAD modelling, structural analysis, product design, and computational simulations (CFD & FEA). What I Offer: ✔3D CAD Modelling & Product Design: Functional & manufacturable designs for various industries. ✔ Finite Element Analysis (FEA): Stress, thermal, and vibration analysis for optimized performance. ✔ Computational Fluid Dynamics (CFD): Airflow, heat transfer, and aerodynamics simulations. ✔ Sheet Metal & Surface Modelling: Precise, industry-standard designs. ✔ Rendering & Visualization: High-quality, realistic product renders. Why Work With Me? ✅ Detail-Oriented & Reliable: Every project is handled with precision and professionalism. ✅ Fast Turnaround & Clear Communication: Get your designs on time with regular updates. ✅ Industry-Standard Tools: Expertise in SolidWorks, AutoCAD, Fusion 360, and Sim Scale. If you're looking for high-quality CAD modelling, simulation, or product design, let's connect! Let’s discuss your project today!

Mechanical Enginneer I have only one and half year industry experience as mechanical engineering in specializing in fluid dynamics, thermodynamics, die and mold design, design of machine elements, ma... Read more

Mechanical Enginneer I have only one and half year industry experience as mechanical engineering in specializing in fluid dynamics, thermodynamics, die and mold design, design of machine elements, manufacturing techniques, finite element analysis and modelling. Also I have experience in facility planning, and mechatronics area. I am also familiar with compressor systems, furnace and glass industry, blower systems, industrial processors, finite element analysis and specially in 3D & 2D modelling with solid works, I always clearly understood my customers.

I'm a mechanical design engineer with 6 years of hands-on experience delivering precise CAD models, assemblies, and engineering simulations for industrial and product design projects. What I do: 3D m... Read more

I'm a mechanical design engineer with 6 years of hands-on experience delivering precise CAD models, assemblies, and engineering simulations for industrial and product design projects. What I do: 3D modeling & detailed drawings in SolidWorks and AutoCAD (GOST / ISO standards) Structural analysis (ANSYS Workbench — static, modal, fatigue) Fluid dynamics simulation (ANSYS Fluent / COMSOL — internal/external flow, heat transfer) Technical documentation and engineering reports Industries I've worked in: mechanical engineering, machine building, HVAC and process equipment, custom product design. I take projects from concept sketch to production-ready documentation — clean geometry, verified simulations, and reports your team can actually use. Available for freelance projects. Typical turnaround: 2–5 days for modeling tasks, 3–7 days for full simulation reports. Let's discuss your project — I'm happy to review your requirements before you commit.

Hello, I'm a design engineer with experience over 5 year as a Design Engineer Specialist. I'm handle some project industrial, sheet metal, product design, design analyst and mold designeer. I Have exp... Read more

Hello, I'm a design engineer with experience over 5 year as a Design Engineer Specialist. I'm handle some project industrial, sheet metal, product design, design analyst and mold designeer. I Have experience with software Computer-Aided Design (CAD), Computer Aided Manufacture (CAM) and Computer Aided Engineering (CAE) for 3D Modeling and analysis design by Finite Element Analyst (FEA) and Computational Fluid Dynamics (CFD).

Highly experienced mechanical engineer, 2D/3D designer, design for manufacturing. skilled in Solidworks, Catia, ANSYS

Highly experienced mechanical engineer, 2D/3D designer, design for manufacturing. skilled in Solidworks, Catia, ANSYS

I am Graduated in Industrial Design & Drawing and I have chosen as best Inventor designer and participated in WorldSkills International in skill 05 Mechanical Engineering CAD. I'm also Autodesk Inven... Read more

I am Graduated in Industrial Design & Drawing and I have chosen as best Inventor designer and participated in WorldSkills International in skill 05 Mechanical Engineering CAD. I'm also Autodesk Inventor, CATIA, Autocad, KeyShot specialist. My CAD & Engineering services includes next: - Building 3D models and 2D drawings for manufacturing in Autodesk Inventor Professional, CATIA, SolidWorks and AutoCAD from concept sketches, drawings or other references. - Create 3D models from cloud point or digitized files for reverse engineering. - Create professional rendered images from modeled parts & assemblies with KeyShot. - Mechanical design and engineering, industrial design, plastic parts design, Surface design, Parametric design. - Frame structure design - Sheet metal design - Design core and cavity for any part for molding. - Create iPart & iAssembly, in Autodesk inventor. i is abbreviation of intelligent. - Create exploding and collapsing animation videos. - Create animation from functionality mechanisms. - Translation form on 3D CAD format to another, - Creating 3D files as STP, IGS, STL, SAT, DXF, etc for 3D printing/prototyping and laser cutting. - Modification of existing 2D drawings and 3D models, - Finite element analysis (FEA) of parts and assemblies, - Computational Fluid Dynamics CFD of parts and assemblies.

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technic... Read more

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technical University of Munich in Germany, -QUT in Brisbane in Australia. I am a driven, creative and organised executive engineer. I have been a company director since 2011, and this shows up in the way I cut to the chase, build strategies and plans, track progress, report and interact with people. I only do high-quality research and modeling. My moto is: first time right. I delegate simpler work and do all the really challenging work and peer reviews myself. I have reached the stage in my career where projects in any industry are similar. If it flows, I can design it. For example, the set-up of the CFD with waves for the marine industry is identical to the set-up of an electromagnetic radiation model. The waves need to be dampened at the boundaries of the models so that the model is not riddled with non-physical reflected waves. Setting up a mesh (pixelisation of the geometry on which the equations are calculated) for a marine foil has exactly the quality criteria as a mesh of a heat exchanger. In all R&D projects, spending between a few days to a few weeks in the most complex cases, enables me to become an expert in the field. My favorite type of project is R&D. I love going deep, learning new things, planing and figuring out how something’s going to work and how to optimise it. I have used Computational Fluid Dynamics (CFD) professionally since 2006. After a thorough CFD software comparison, I selected Siemens STAR-CCM+ and I have used it exclusively ever since. Star-CCM+ is a high productivity CFD software, equivalent to ANSYS Fluent. For more information: resolvedanalytics.com/theflux/comparing-cfd-software-part-4-comprehensive-cfd-software-packages My first job (9 years) was in building physics, for a premium building services consultancy. I set up the CFD modelling capability from scratch, and I became the CFD expert in the Australian Standards 1668.2 committee. I performed CFD modelling for: ventilation (natural and mechanical), fire, active facades conjugate heat transfer, pollutant dispersion and wind. My performance-based designs saved carpark owners and contractors 100,000's of $. I spent most of 5 years researching active facades that store energy and redirect sunlight deep in the building. I modelled heat transfer, phase change and radiation in the CFD software. In 2015, my mother was diagnosed with cancer, and I moved back to France temporarily with my family to look after my parents. I decided to start a "portable" consulting and supercomputing business and called it trampoCFD. Trampo for trampoline: my secret weapon to keep a creative mind is an Olympic trampoline break multiple times a day. I applied my CFD knowledge to improve process performance in many different industries: pneumatic conveyors, mining classifier, injectors, factory, vertical farm and carpark HVAC, irrigation, ohmic heating, coffee machine, marine and wind power generation to name a few. My skills include: -dilution/dispersion, -mixing, -Multi-phase and phase change (Free surface flow, evaporation/condensation, melting/solidification) -Electromagnetics (Joule's effect, Ionic wind, electromagnet) -DEM (grain, sand) -Conjugate heat transfer -Automation -Optimization -Moving bodies -CAD: Solidworks and NX -FEA: Electromagnetic static or dynamic simulations In 2019, Siemens approved me as a software reseller, which means Siemens recognised my ability to provide technical support to CFD engineers on Star-CCM+. This enables me to continue helping my clients once they develop an in-house CFD capability. In 2020, I became the lead CFD engineer of a group of 4 engineers and 2 developers who take on the most complex CFD and multiphysics consulting projects . I hope the above summary gives you a clear idea of my capability. I would love to discuss your project. Please get in touch! Best Regards, Guillaume Jolly ▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒: guillaume_jolly_pro ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ (iphone: ▒▒▒▒▒▒▒▒ & ▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒)

I am a Computational Fluid Dynamics (CFD) engineer with over 10 years of professional experience in US and Canada, specializing in OpenFOAM, Fluent and advanced simulation workflows. I have successful... Read more

I am a Computational Fluid Dynamics (CFD) engineer with over 10 years of professional experience in US and Canada, specializing in OpenFOAM, Fluent and advanced simulation workflows. I have successfully completed numerous optimization, multiphase flow, and turbulence modeling projects for clients in aerospace, energy, and mechanical engineering industries. Core Expertise * OpenFOAM, Fluent case setup, customization, and solver development * Flow simulation (laminar, turbulent, compressible, and incompressible flows) * Heat transfer and conjugate heat transfer (CHT) * Multiphase flow, cavitation, and free surface simulations * Proficient in C++ and Fortran * Post-processing and data visualization (ParaView, Python)

Hello! I'm a mechanical engineering student with a focus on mechanical design and numerical simulation. With experience in both industrial and academic settings, I have completed numerous projects in... Read more

Hello! I'm a mechanical engineering student with a focus on mechanical design and numerical simulation. With experience in both industrial and academic settings, I have completed numerous projects in these fields. I possess a strong command of both commercial and open-source software, allowing me to deliver high-quality solutions tailored to my clients' needs. Whether it's designing innovative mechanical systems or performing complex simulations, I thrive on finding efficient and effective solutions to challenging problems. My expertise lies in utilizing industry-standard software, such as SolidWorks, CATIA, and AutoCAD, to create detailed 3D models and assembly designs. Additionally, I am skilled in utilizing simulation software like ANSYS, COMSOL, and Abaqus to analyze mechanical behavior and optimize designs for performance and reliability. In the industrial sector, I have successfully completed projects ranging from product design and optimization to structural analysis and fluid dynamics simulations. On the academic front, I have conducted research projects focused on developing advanced numerical models and conducting parametric studies for optimization. My commitment to delivering high-quality work, combined with my attention to detail and strong problem-solving skills, ensures that I consistently meet project requirements and exceed client expectations. I am a reliable and proactive team member, and I enjoy collaborating with clients to achieve their project goals. If you are looking for a skilled mechanical engineer who is proficient in both mechanical design and numerical simulation, I am here to help. Let's work together to bring your ideas to life and overcome engineering challenges with precision and innovation.

I am an Automotive engineer with 10+ years of experience with severeal CAD & CAE software such as: CATIA V5 , SolidWorks, Autodesk Inventor, Solid Edge, PTC Creo, Ansys and others. During my Master... Read more

I am an Automotive engineer with 10+ years of experience with severeal CAD & CAE software such as: CATIA V5 , SolidWorks, Autodesk Inventor, Solid Edge, PTC Creo, Ansys and others. During my Master Studies in Germany I had the opportunity to work at Porsche Engineering.

Hello!!! I am Design Engineer Experienced in sheet metal design and Molded Plastic part design . Other than that I have worked on product design / product Conceptualization/ Finite element analysi... Read more

Hello!!! I am Design Engineer Experienced in sheet metal design and Molded Plastic part design . Other than that I have worked on product design / product Conceptualization/ Finite element analysis and Computational Fluid Dynamics for developing a product from scratch. Being a Core Mechanical Engineer , I have worked on Strength and Durability of different products parts with FEA and CFD tools. My Services include 2D drafting, 3d modelling, Concept/product development, 3D Rendering, FEA and CFD analysis , Prototyping & manufacturing.

I am a detail oriented Mechanical Design engineer with hands-on experience in mechanical design, Design for Additive Manufacturing (DFAM), Finite Element Analysis (FEA) Computational Fluid Dynamics (C... Read more

I am a detail oriented Mechanical Design engineer with hands-on experience in mechanical design, Design for Additive Manufacturing (DFAM), Finite Element Analysis (FEA) Computational Fluid Dynamics (CFD),Rapid Prototyping, computer-aided manufacturing (CAM), Manufacturing drawings and design supports with over 5 years of remote and on-site support to engineering teams.