Hire the best freelance Design and Analysis expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

3D Modeling using solidworks Analysis using Ansys Projects 1) Development and Evaluation of an optimized Hybrid powertrain ,Design using simplified Simulation methods. 2) Analysis of Coating and... Read more

3D Modeling using solidworks Analysis using Ansys Projects 1) Development and Evaluation of an optimized Hybrid powertrain ,Design using simplified Simulation methods. 2) Analysis of Coating and reducing friction ,wear ,and improve Heat reduction in engine . 3) Analysis of fluid Flow inside the engine. 4) Design and Analysis of Battery Charger using Stirling Engine . 5) Design and Analysis of Robotic Arm

Shyamsundar. J +91-8608098175, 9442126895. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Objective: To work for an organization this provides me the opportunity to improve my skills and knowledge to growth alon... Read more

Shyamsundar. J +91-8608098175, 9442126895. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Objective: To work for an organization this provides me the opportunity to improve my skills and knowledge to growth along with the organization objective. Personality Traits: • Highly motivated and eager to learn new things. • Ability to produce best result. • Good co-operation with team members. Educational Qualification: Name of the institution Degree Percentage Batch K.S.R Institute for Engineering and B.E Mechanical 72.2% 2016 Technology Engineering Sri Vijaya Vidayalaya boys Hr. Sec. 12 th 88% 2012 School Sri Vijaya Vidayalaya boys Hr. Sec. 10 th 86% 2010 School Internships: Organization Place Duration Trained on Marval Nissan SALEM Four Days Automobile Servicing AMSI Technologies BENGALURU Four Months CATIA V5 Lionbridge Technologies CHENNAI Two Months Technical Publication Technical Skills: • Auto CAD • Creo Parametric 2.0 • CATIA V5 • ANSYS 14.0. • GD & T (Basics). Certification: Diploma in product design in CATIA V5 and ANSYS 14.0 Id no : M170177615. Internship Description: • Worked in AMSI TECHNOLOGIES in the role of intern trainee learned advance level in CATIA V5 software workbench like( PART,SURFACE,SHEETMETAL,IMAGE TRACING) 4 months trained professionally under few project which they given. • Have trained in TECHNICAL PUBLICATION in various manual and under gone job training in LION BRIDGE TECONOLOGIES Certification Description: • Have done a certification course “DIPLOMA IN PRODUT DESIGN AND ANALYSIS” under the software’s CATIA V5 , ANSYS,& GD&T in the period of 5 months done a projects to certified in CADDCENTER Knowledge On: • Engineering Drawing, Engineering Mechanics, Strength of Materials. • ATA ispec2200, Simplified Technical English. • EM, SRM, CMM, AIPC, EIPC, CIR. Academic Projects: Project Name : Design the suspension of sling shot bike and analysis that Suspension and optimized that design. Project Name : Investigation and performance evaluation in C.I with the Blends of plastic oil & diesel. Workshops Attended: • Emerging Trends in Automobile Industries. • How to Face Gate and Competitive Examinations. • Solid works. • Compressed Air engine. Achievements & Extra-Curricular Activities: • Have won Hand Ball match in our college sports day. • Won second prize in inter department competition conducted by BEES Association. • Member in MERF association of Mechanical department. • Member in Indian Society for Technical Education (ISTE). Personal Details: Date of birth : 25th Aug, 1995 Gender : Male Languages known : Tamil, English, Telugu Address : 17/9, Nanjan street, near S.V road, Dharmapuri-636701. Signature, SHYAMAUNDAR.J

I am a product designer with a formal education in mechanical engineering (master degree) who has always been eager to learn and develop himself. My knowledge is quite broad and I can assist clients w... Read more

I am a product designer with a formal education in mechanical engineering (master degree) who has always been eager to learn and develop himself. My knowledge is quite broad and I can assist clients with all of their different needs, although being broad I would dare to say that my knowledge is also quite detailed and specialized. I work full-time as a freelancer therefore I will always be available for work, communication, feedback and regular updates. My projects: - design and stress analysis of an aeroplane medical stretcher bed (Turkish Tecnic, Turkey), - writing technical documents for stress analysis of aircraft structures (ASELSAN, Turkey), - various financial spreadsheets (with macros), - logistics trade software (MVS, C#) - PINKI Project (as part of the CGP team; the project was awarded as GrabCAD best collaborative model), - molds for plastic injection (Bekto Precisa, Bosnia and Herzegovina), - stress analysis of pressure vessels (3dmehanika, Bosnia and Herzegovina), - design and stress analysis of a composite bicycle frame (master thesis), - many other projects which where done under NDA agreements and cannot be presented (I actually do respect the NDA agreements and do not promote these projects for this reason). Software knowledge (I only listed softwares in which I excel, there are many others I know with less proficiency): - CATIA V5, - ABAQUS, - SolidWorks, - NASGRO, - C#, - MS Office, - Visual Basic. Language knowledge: - Bosnian = mother tongue; - English = fluent; - German = fluent;

I was born in Purworejo. I come from Vocational High School 1 Purworejo. Now I study at Politeknik Gajah Tunggal.

I was born in Purworejo. I come from Vocational High School 1 Purworejo. Now I study at Politeknik Gajah Tunggal.

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following service... Read more

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following services design 3D models 3D rendering with high quality image 3D assemblies 3D animations 3D printing with checked stl files on shapeways simulations Make 2D drawings sheet metal working ,weldments i will be using soildworks visualize,photoview 360 and keyshot program for rendering Offers: unlimited revisions Quality work within the specified time frame

Engineering consultancy based in Australia, specialized in engineering design and analysis. Expertise in Drafting, 3D modelling, HVAC, Mechanical, Structural engineering design. We design Workboat, Fi... Read more

Engineering consultancy based in Australia, specialized in engineering design and analysis. Expertise in Drafting, 3D modelling, HVAC, Mechanical, Structural engineering design. We design Workboat, Fishing boats, recreational boats & all other floating structure. In addition we provide Architecture 3D rendering and visualization services such as Interior, exterior 3D views & walkthrough video of residential, commercial and Industrial projects. A Multi-specialist company who delivers quality service by working closely with our clients. We carefully analyze your challenges and strive to offer the best solution suitable to your needs.

Hello All, This is Saravana Kumar, having 3 years experience in Mechanical design and worked on various projects. I am certified as 'Professional in Product Design and Analysis' by CADD.

Hello All, This is Saravana Kumar, having 3 years experience in Mechanical design and worked on various projects. I am certified as 'Professional in Product Design and Analysis' by CADD.

A applied bachelor of Design and Manufacture Engineering from Shipbuilding Institute of Polytechnic Surabaya. I am very passionate about manufacturing and mechanical engineering. I am able to design a... Read more

A applied bachelor of Design and Manufacture Engineering from Shipbuilding Institute of Polytechnic Surabaya. I am very passionate about manufacturing and mechanical engineering. I am able to design and understand 2D & 3D engineering drawing, 3D structure simulation. Good analytical thinking, hardworking and able to work under pressure, good personality and communication skills in terms of working individually or in team.

I am a hardworking, responsible and creative person. I am open to work with new projects connected with both design-related 3D-presentations starting from creation of 3D models to animation and render... Read more

I am a hardworking, responsible and creative person. I am open to work with new projects connected with both design-related 3D-presentations starting from creation of 3D models to animation and rendering, and mechanical engineering: calculations, development of drawings as well as 3D modeling (hydraulics, metal constructions, electromechanical equipment, dies, molds, mine equipment, concrete mixers, batching plants and other). I will dedicate all my skills and efforts to provide you with quality products.

From India, Professional in product design and analysis, 18 years of engineering experience i have in different industries

From India, Professional in product design and analysis, 18 years of engineering experience i have in different industries

Design specialised in Motorsport Aftermarket parts,product design,invention design,tool design and basics in Character Modelling

Design specialised in Motorsport Aftermarket parts,product design,invention design,tool design and basics in Character Modelling

I am G.Syam Pavan a graduate from KL University in the stream of Mechanical Engineering. I had completed 3 months full time course in E Mug Technologies on "Unigraphics"domain.It also covers some modu... Read more

I am G.Syam Pavan a graduate from KL University in the stream of Mechanical Engineering. I had completed 3 months full time course in E Mug Technologies on "Unigraphics"domain.It also covers some modules like part,drafting,surfacing,sheet metal,wireframe .I Can also read and develop drawings using GD&T Symbols according to ASME 14.5 Standards. 1.I had done my project on the design and analysis of Delta parallel Robot. 2 I had done my final year project on analysis on solar car frame.

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, o... Read more

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, organized, intelligent, motivated, and communicative.

I'm a mechanical design engineer who has worked in various domains like automotive, automation and new product development. I am confident in the skills that I can take upon a variety of design chall... Read more

I'm a mechanical design engineer who has worked in various domains like automotive, automation and new product development. I am confident in the skills that I can take upon a variety of design challenges and go beyond the expectations of my clients.

CATIA based designing 3D products design Drone Design and simulation Automotive Design and Analysis Experience with 3d printing

CATIA based designing 3D products design Drone Design and simulation Automotive Design and Analysis Experience with 3d printing

Master's degree in mechanical engineering with a focus on computational methods and modeling. As a graduate student ambassador at Northeastern University, I have been involved in various academic and... Read more

Master's degree in mechanical engineering with a focus on computational methods and modeling. As a graduate student ambassador at Northeastern University, I have been involved in various academic and extracurricular activities, such as mentoring new students, organizing events, and participating in research projects. I have also gained valuable industry exposure and hands-on skills through my internship at ONGC Mangalore Petrochemicals Ltd, where I assisted in the design and analysis of heat exchangers and boilers. I am proficient in MATLAB, COMSOL, SOLIDWORKS, and Python, and have earned multiple certifications in engineering drawings and Fusion 360. I am passionate about solving complex engineering problems and applying my knowledge to real-world challenges. I aspire to become a successful engineer and researcher in the field of mechanical engineering and contribute to the advancement of science and technology.

Hello everyone!! I have good experience and handson on following tools - Solidworks - Keyshot - Sketchup - AutoCAD And also similar 3D & CAD software I can provide following services... - 3D CADm... Read more

Hello everyone!! I have good experience and handson on following tools - Solidworks - Keyshot - Sketchup - AutoCAD And also similar 3D & CAD software I can provide following services... - 3D CADmodelling - ManufacturingDrawings - Product Rendering -Visualization - Static Analysis Thank you

I'm a professional and expert in 3D Modelling in SOLIDWORK, AUTOCAD, Siemens NX, CAD/CAM and Analysis in ANSYS. We can design your product using above softwares. Visit my website jagruthtech.in... Read more

I'm a professional and expert in 3D Modelling in SOLIDWORK, AUTOCAD, Siemens NX, CAD/CAM and Analysis in ANSYS. We can design your product using above softwares. Visit my website jagruthtech.in for more info. I own a Design and analysis industry in Mysore,India. we recieve 100's project from industry and do academic services also. I have employees who are expert in SOLIDWORK, AUTOCAD, Siemens NX, CAD/CAM. Even we are looking for long term cooperation thats why im bidding at less price. We Just need dimensions to start. Check out my portfolio for my recent projects on SOLIDWORK, AUTOCAD, Siemens NX, ANSYS. I have 5 years experience in 3D Modelling in SOLIDWORK, Siemens NX, AUTOCAD, CAD/CAM and ANSYS. I have expert in 3D Modelling using SOLIDWORK, Siemens NX, AUTOCAD and ANSYS on different domains like 1. Aircraft domain. 2. Automobile domain. 3. Turbo machinery. 4. Compressor and Pump. 5. On Renewable Energy, visit my portfolio to see my recent projects

Hello, I am Deepak Kumar, a Mechanical Engineer specializing in Machine Design and Analysis. I have strong expertise in SolidWorks and ANSYS, with experience in creating detailed models, assemblies, s... Read more

Hello, I am Deepak Kumar, a Mechanical Engineer specializing in Machine Design and Analysis. I have strong expertise in SolidWorks and ANSYS, with experience in creating detailed models, assemblies, simulations, and industrial design solutions. What I Provide in SolidWorks -2D Drawings with precise dimensions and tolerances -3D Part Modelling (solid and feature-based design) -Assembly Design with motion and interference checks -Sheet Metal Design with flat patterns and fabrication drawings -Surface Modelling for complex or aesthetic geometries -File Deliverables in STEP, IGES, STL, and Parasolid (.XT) formats -Design Support for both industrial and academic projects -3D Printing Services using Bambu Lab What I Provide in ANSYS -Static Analysis: Stress, strain, deformation, FOS, and failure criteria (Von Mises, Tresca) -Modal/Vibration Analysis: Natural frequencies, mode shapes, and acoustic-structural coupling -Thermal Analysis: Steady-state, transient, and thermo-structural coupling -Dynamic Analysis: Transient, harmonic, impact, and cyclic loading simulations -Nonlinear Analysis: Material (plasticity, creep) and geometric nonlinearity, contact & friction -Fatigue & Life Analysis: Fatigue life prediction using S-N curves under cyclic stresses -Advanced Simulation: Topology optimization, composites, parametric studies, and CAD-FEA integration -Reporting: Detailed reports with contour plots, deformation animations, and research-ready documentation -Reports: 100% plagiarism-free technical and analysis reports Note -Feel free to contact me anytime for design guidance, simulation advice, or project discussions I’m always happy to help, and all advice is free of cost.

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of... Read more

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of engineering expertise to deliver premium consulting services, encompassing everything from design to creation of concept-to-manufacture schematic drawings, FEA analysis, and comprehensive Design for Manufacturability (DFM) insights. My proficiency extends to various SolidWorks certifications. With a proven ability to excel across a wide spectrum of industries, I invite potential clients to peruse my portfolio. I look forward to connecting with you and/or your company to understand your specific goals and collaborate on tailored solutions that will drive your success to new heights.

Stephen Lemayan is the principal and owner of Masra Engineering Inc., and is a licensed professional Technician engineer in Kenya . Mr. Stepehn holds a Higher National Diploma Construction Structura... Read more

Stephen Lemayan is the principal and owner of Masra Engineering Inc., and is a licensed professional Technician engineer in Kenya . Mr. Stepehn holds a Higher National Diploma Construction Structural Engineering Option from Kenya Institute Of highway and Building Technology emphasis in advanced structural engineering and design, and foundations engineering; and a Diploma in Civil Engineering from the same Institution Mr. Stephen has worked for five years in the construction industry as a Technician engineer . He next spent about three with a Material Firm working as a material Technician engineer and has worked jointly with Leading architectural firms in kenya in Various projects as a Cad operative Stephen l sairo formed Masra Engineering in 2016 , and has subsequently consulted on a broad range of structural areas. These range from general civil and structural engineering to specific forensic failure investigations of foundations and Super Structures, to specialized stress analysis, testing and product design of manufactured structural products, encased buckling analysis of buried structures, composite sandwich structures,

#Accuracy #Consistent #Productivity Solidworks, X-Design, Siemens NX, Fusion 360, CATIA, AutoCAD Cloth Folding Machine, Electric Peeler, Laptop Cooling-pad With Water Circulation, Automated Plant Wat... Read more

#Accuracy #Consistent #Productivity Solidworks, X-Design, Siemens NX, Fusion 360, CATIA, AutoCAD Cloth Folding Machine, Electric Peeler, Laptop Cooling-pad With Water Circulation, Automated Plant Watering System , Design And Analysis of Tractor Trolley for heavy duty application

MSc graduate from the aerospace engineering department. over total 4 years of professional work. CAD and CAE capability. AUTOCAD; INVENTOR; PATRAN; ABAQUS; ANSYS; NASTRAN; MSC MARC; Had a role in d... Read more

MSc graduate from the aerospace engineering department. over total 4 years of professional work. CAD and CAE capability. AUTOCAD; INVENTOR; PATRAN; ABAQUS; ANSYS; NASTRAN; MSC MARC; Had a role in design and analysis projects of TOYOTA, DELPHI, VALEO, THY etc... Finite element analysis, geometry topology optimization and roll form design. design of solar photovoltaic power plants experience (2 yrs, over 1GW)

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

Certified in AutoCAD Self-prepared in Solidworks. Certified in NX-CAD/CAM/CAE by SIEMENS PLM. Certified by FABLAB in Additive Manufacturing in 3D printing technology (STRATASYS F370 & Makerbot).

Certified in AutoCAD Self-prepared in Solidworks. Certified in NX-CAD/CAM/CAE by SIEMENS PLM. Certified by FABLAB in Additive Manufacturing in 3D printing technology (STRATASYS F370 & Makerbot).

My Name is Nitesh ,I will provide you full services on Manufacturing , Fabrication and product 3D models and drawings for Plastic and Sheet Metal parts with GD&T Standard ASME14.5 . Key Skills and... Read more

My Name is Nitesh ,I will provide you full services on Manufacturing , Fabrication and product 3D models and drawings for Plastic and Sheet Metal parts with GD&T Standard ASME14.5 . Key Skills and Provided Services: Technical Drawings and Source Files, Ready for Manufacturing Drawings Engineering Drawings with GD&T, BOM files and Specs Data, Drawings for Laser Cutting operation Sheet metal Drawings - for bending operations and bend lines specs. Industrial and Concept Product Designs, Drawings for Inspection - Plastic injection/Rotational Molded , CNC Manufacturing and Mold Design - Injection and Rotational Molding. Advanced Technical Report Writing, Why choose me? I am professional mechanical design engineer with 7 years experience in Automobile Parts ,Machine and Plastic Parts design and also licensed product designer. Have Professional experience on the usage of engineering design and analysis software tools such as Autodesk Fusion 360, Solidworks, Autocad, PTC Creo, Ansys etc.