Hire the best freelance Concept Development expert designers for your company

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manuf... Read more

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manufacturable product that meets their specific goal. Based on your needs, you may choose from any number of the following services: - Concept Development - 3D Modeling & Rendering - Mechanical Analysis - Drawings & Documentation - Fabrication Sourcing - Consulting Certifications: Bachelor of Science in Mechanical Engineering - Valparaiso University, 2011 Certified SolidWorks Professional

A versatile Mechanical Design Engineer with 25 years of experience in manufacturing. I can assist with concept development, machine design, manufacturing drawings, design modifications and technical... Read more

A versatile Mechanical Design Engineer with 25 years of experience in manufacturing. I can assist with concept development, machine design, manufacturing drawings, design modifications and technical documentation. I have delivered projects across the nuclear, mechanical handling, rotating equipment, power generation and road tanker industries. I specialise in 3D CAD design using Inventor and am also proficient in SolidWorks and Fusion 360. Where required, I can support designs with engineering calculations and simulation to demonstrate that designs are safe, fit for purpose and compliant.

1. Working Hours (Flexible Working Hours) Flexible working hours. Available for both short-term and long-term freelance projects, depending on project requirements and workload. 2. Payment Terms I p... Read more

1. Working Hours (Flexible Working Hours) Flexible working hours. Available for both short-term and long-term freelance projects, depending on project requirements and workload. 2. Payment Terms I prefer Fixed-Price projects with milestone-based payments through cadcrowd.com or ▒▒▒▒▒▒. However, I am also open to Hourly projects, depending on the scope of work. 3. Communication I am available for communication through Guru WorkRoom, ▒▒▒▒▒▒▒▒ +six two 123 one two tree 7518, and online meetings. I provide regular project updates and maintain clear and consistent communication throughout the project. 4. Other Terms Available for individual freelance assignments, project-based contracts, and long-term collaborations. The scope of work, deadlines, number of revisions, and service fees are negotiable based on the client's requirements.

My mission is to deliver reliable, efficient, and production-ready engineering solutions tailored to both your technical requirements and your clients’ needs. What I Offer - Professional CAD / CAM /... Read more

My mission is to deliver reliable, efficient, and production-ready engineering solutions tailored to both your technical requirements and your clients’ needs. What I Offer - Professional CAD / CAM / CAE Services - 3D modeling and product design optimized for manufacturing - Concept development and engineering design My Expertise - 3D CAD modeling and design for parts, assemblies, and complex systems - Manufacturing-optimized design (injection molding, CNC machining, sheet metal fabrication, additive manufacturing) - Mechanical engineering and conception, including: - Powertrain design & calculations - Bearing design & sizing - Mechanism and transmission systems - Static/basic Finite Element Analysis (FEA) for strength and durability assessment - Motion analysis & kinematics for moving systems - Technical documentation & manufacturing drawings with complete details - Engineering reports with clear results, recommendations, and data

I am a Mechanical & Industrial Designer with strong expertise in SolidWorks, product design, mechanical part modeling, 3D CAD development, sheet metal design, and technical drawing creation. I have c... Read more

I am a Mechanical & Industrial Designer with strong expertise in SolidWorks, product design, mechanical part modeling, 3D CAD development, sheet metal design, and technical drawing creation. I have completed real-life industrial projects, creating functional, manufacturable, and visually appealing designs for various industries. Services I provide: • 3D Modeling (SolidWorks) • Product Design & Concept Development • Mechanical Parts & Assembly Design • Sheet Metal & Weldment Design • 2D Drawings, BOQ, GD&T • 3D Rendering & Visualization • Reverse Engineering & Design Modification I deliver professional-quality design, fast communication, and reliable support. Let’s build something great together.

I am a recently graduated automotive designer (1st class) who believes that my personal, academic skills and automotive design expertise perfectly link together to make me a great candidate for any jo... Read more

I am a recently graduated automotive designer (1st class) who believes that my personal, academic skills and automotive design expertise perfectly link together to make me a great candidate for any job in the automotive, transport and product design industry. My designing skills have been developed though my BA (hons) in Automotive & Transport Design. The main design and creative skills that I have used are hand and digital sketching, Adobe Photoshop, Illustrator, Alias Autodesk and VRED. These design skills have been further developed in my final year projects. By using my creative and environmentally friendly mentality, I can efficiently merge design and technology together. For example, I have worked on a self-sustained hypercar which will be powered by solar and wind energy and designed to reach the highest level of efficiency and performance. This will be possible by using simultaneously intelligent design and aesthetic simplicity which constantly addresses aerodynamics and effectiveness. The design features high-end technology and a body created to get as much solar and wind energy as possible. The process that I follow in my projects is the usual for any car design development in industry. Firstly, I come up with an idea from existing inspiration or by acknowledging a gap or target market not covered yet. I then complete some research and start roughly hand sketching my ideas which I later refine with more defined hand and Photoshop sketches. After that, I create orthographic views and the package drawings in order to start modelling the concept in Alias Autodesk. Once done, I render the model in VRED and I also create some final Photoshop renderings and am therefore confident of my skills in using the Adobe suite of packages especially Photoshop. My personal skills, I believe, make me highly suited to the design and automotive industries as I always pursue creativity and innovation together with a hard working attitude and a quest for excellence. I like to push myself to improve through practice, observing others and learning from my surroundings. My observation skills and ability to synthesise ideas plus my mature and calm nature, gives me a strong problem solving capacity with a responsible point of view. For example, the issue I spotted in my final year motorcycle project was that if the engine modifications were not complemented by corresponding body design alterations, then optimum performance would never be achieved. This sort of creative inspiration is something that I routinely bring to my work. As seen in my final course project, I am an innovative person who is passionate about creating new ways of futuristic mobility in consonance with the environment. I am also an enthusiastic person who likes to get involved. I can comfortably adapt to any situation and love to learn from others, which perfectly links up with my capacity of working as part of a team. Due to this dedication, I easily achieve good results on whatever I work on. I am self-organised, proactive and resilient and during my final year I combined adapting to the change in my degree course from face to face to online studies due to the COVID restrictions; but I also managed multiple deadlines, a final year design project whilst working on a part time project creating a 3d model using Alias Autodesk as a commission piece for an artist colleague. I am a self-confident and persuasive person who likes to debate with respect and understanding of other’s opinions, and as such I am a skilled, multi-lingual (Spanish, English and Basic French) communicator and leader. I also consider myself an open-minded person with an international upbringing. For example, moving away from home has developed my confidence in personal and professional aspects.

I am a Product Designer and CAD Designer specializing in 3D CAD modeling, product development, technical drawing, and design visualization. With a background in Industrial Design and Architecture, I h... Read more

I am a Product Designer and CAD Designer specializing in 3D CAD modeling, product development, technical drawing, and design visualization. With a background in Industrial Design and Architecture, I help startups, manufacturers, engineers, inventors, and businesses transform ideas, sketches, concepts, and existing products into accurate, functional, and professionally detailed CAD designs. My services include: • 3D CAD modeling and product design • Product development and concept development • Mechanical and product assemblies • 2D technical and production drawings • Detailed drafting and documentation • Design for Manufacturing (DFM) considerations • Prototype and 3D printing design • Reverse engineering and CAD conversion • Product modifications and design optimization • Architectural and furniture/product detailing • 3D modeling and visualization • Manufacturing and presentation-ready CAD files I focus on functionality, accuracy, clean modeling, practical design solutions, and attention to detail. My Industrial Design background allows me to approach projects not only from a technical perspective, but also with consideration for usability, aesthetics, ergonomics, materials, and how the final product will be made and used. I can work from hand sketches, images, PDFs, measurements, existing CAD files, reference products, or basic concepts and develop them into detailed 3D models, technical drawings, and professional design documentation. My experience includes working with AutoCAD, Fusion 360, SolidWorks, Blender, and other CAD and 3D design tools, allowing me to adapt to different project requirements and workflows. Whether you need a single part, product prototype, furniture design, architectural drawing, 3D model, technical drawing, or development of a concept from scratch, I can help turn your idea into a clear, accurate, and professionally developed design.

I am a Mechanical Design Engineer with more than 12 years of experience in CAD engineering, specializing in SolidWorks 3D modeling, fabrication drawings, welding jigs, fixtures, CF design, and Special... Read more

I am a Mechanical Design Engineer with more than 12 years of experience in CAD engineering, specializing in SolidWorks 3D modeling, fabrication drawings, welding jigs, fixtures, CF design, and Special Purpose Machines (SPM). Throughout my career, I have successfully designed more than 500 welding jigs, fixtures, and manufacturing equipment from concept development to production-ready engineering drawings. My expertise includes creating accurate 3D models, detailed fabrication drawings, assembly drawings, manufacturing documentation, tolerance analysis, and design optimization for real-world production environments. My Services: ✔ 3D CAD Modeling (SolidWorks) ✔ 2D Technical Drawings & Shop Drawings ✔ Fabrication Drawings for Manufacturing ✔ Welding Jig & Fixture Design ✔ Special Purpose Machine (SPM) Design ✔ Sheet Metal Design ✔ Mechanical Assembly Design ✔ Manufacturing Drawing Packages ✔ Engineering Design Review & Optimization ✔ GD&T and Tolerance Analysis ✔ DXF/DWG File Preparation for CNC, Laser Cutting, and Fabrication Software: SolidWorks (10+ Years Experience) AutoCAD (Drawing Support) DXF / DWG Production Files Manufacturing Knowledge: Fabrication & Welding Processes CNC Milling & Turning Manual Machining Surface & Cylindrical Grinding EDM & Wire Cut Pneumatic Systems CMM Measurement Industrial Manufacturing Processes Why Hire Me? 10+ years of hands-on engineering experience Strong fabrication and manufacturing background Detail-oriented and highly analytical Practical engineering solutions, not just CAD models Reliable communication and on-time delivery Production-ready drawings suitable for fabrication shops If you need a professional CAD engineer who understands both design and manufacturing, I can help transform your concepts into accurate, production-ready engineering drawings.

I'm an Architect and 3D Visualization Specialist with hands-on experience turning 2D concepts and drawings into detailed 3D models and photorealistic renders. I work fluently across AutoCAD, Revit,... Read more

I'm an Architect and 3D Visualization Specialist with hands-on experience turning 2D concepts and drawings into detailed 3D models and photorealistic renders. I work fluently across AutoCAD, Revit, SketchUp, Lumion, D5 Render, Enscape, and Photoshop. My focus areas: - Photorealistic interior & exterior architectural rendering - 3D modeling from sketches, PDFs, or 2D CAD drawings - Space planning for residential, commercial, and compact urban layouts - 2D floor plans, elevations, and working drawings - Site plan and multi-unit development visualization I currently work as an Architectural Designer for Image Foundry Studios (UK), handling design review, client coordination, and render/revision quality control — alongside 1.5 years as a full-time Architect at The Design Venture, where I led concept development, space planning, and photorealistic visualization for residential and commercial projects. I prioritize accuracy, clean communication, and fast turnaround — my goal on every project is to give clients a render or drawing set they can present to their own clients or stakeholders with full confidence.

I’m a Product Design Engineer with a background in professional design engineering, hands-on marine systems and practical prototyping. I specialise in turning ideas, sketches and real-world problems i... Read more

I’m a Product Design Engineer with a background in professional design engineering, hands-on marine systems and practical prototyping. I specialise in turning ideas, sketches and real-world problems into functional 3D models, technical drawings and prototype-ready designs. I hold qualifications in Multi-Disciplinary Engineering & Design and Drawing Office Practice, with professional experience designing industrial environmental-control and process systems using AutoCAD and Autodesk Inventor. Since moving into the superyacht industry in 2014, I’ve gained extensive hands-on experience working with mechanical equipment, marine systems, maintenance, fabrication and practical problem-solving. That experience strongly influences how I design: simple, functional, serviceable and built around how something will actually be used. Today I work primarily in Shapr3D, alongside AutoCAD, Inventor and FDM 3D-printing workflows. My independent projects include mechanical products, irrigation and hydroponic systems, equipment concepts, assemblies, functional mechanisms and everyday product solutions. The part I enjoy most is the beginning: you have an idea, sketch or problem — I work out how to turn it into something real. Available for product design, 3D CAD modelling, technical drawings, concept development, design for 3D printing and prototype development.

Looking for a professional product design? Ready to manufacture? Influenced by creative ideas? Then you're at the right place! Just pitch in your idea! Services include: 1. Consultancy 2. Brainstor... Read more

Looking for a professional product design? Ready to manufacture? Influenced by creative ideas? Then you're at the right place! Just pitch in your idea! Services include: 1. Consultancy 2. Brainstorming on the Idea 3. Concept Development 4. Bringing concept to reality 5. Complete Engineering related to Product Design 6. Mathematical Calculations 7. Presentations for Marketing 8. Posters for Marketing 9. Renders for Marketing and Publicity 10. Complete Engineering Drawings 11. Manufacturing Guide 12. Cost analysis and material selection based on your local availability 13. CAD Files 14. Procurement Guide 15. Use of Standard Items 16. Market Analysis

I'm a Mechanical Design Engineer specializing in product development, 3D CAD modeling, and design for manufacturing (DFM). I help turn product ideas into functional, manufacturable designs, from initi... Read more

I'm a Mechanical Design Engineer specializing in product development, 3D CAD modeling, and design for manufacturing (DFM). I help turn product ideas into functional, manufacturable designs, from initial concepts and detailed engineering to prototyping and production-ready documentation. My experience covers consumer products, electronics enclosures, plastic components, and mechanical assemblies. I primarily use SolidWorks for 3D modeling, assemblies, and technical drawings, along with Blender for product visualization and rendering. My areas of expertise include: - Product Design & Development – Concept development, design refinement, functionality, and manufacturability. - 3D CAD Modeling & Assemblies – Parametric modeling, mechanical components, assemblies, and detailed engineering drawings. - Design for Manufacturing (DFM) – Practical design considerations for plastic injection molding, blow molding, CNC machining, sheet metal fabrication, and 3D printing. - Plastic Product & Enclosure Design – Injection-molded components, electronics housings, snap-fit features, and assembly considerations. - Prototyping & Design Improvement – Design iterations, material selection, fit and assembly evaluation, and production-oriented improvements. - Product Visualization – Realistic 3D renders using Blender to communicate product concepts and design details. Having worked across consumer products, electronics, and manufacturing industries, I understand the importance of balancing aesthetics, functionality, cost, and production requirements.

I help design and develop consumer and hardware products, engineer mechanical systems, and reconstruct existing components into accurate, manufacturable designs backed by practical engineering and doc... Read more

I help design and develop consumer and hardware products, engineer mechanical systems, and reconstruct existing components into accurate, manufacturable designs backed by practical engineering and documentation. From early concepts and working prototypes to legacy components and existing products, my work focuses on the engineering decisions that determine whether a design can be manufactured, assembled, inspected, and used as intended. With more than 12 years of experience in product development and manufacturing across a variety of industries and processes, I bring a practical understanding of how engineering decisions affect tooling, production costs, supplier execution, quality, and product performance. CORE SERVICES ■ PRODUCT DESIGN & DEVELOPMENT ◦ Concept development and product design from ideas, sketches, photographs, or reference products. ◦ Mechanical engineering, 3D CAD development, and prototype design. ◦ Patent-Informed Design Alternatives: Explore alternative product architectures, mechanisms, and features informed by existing patents and prior art, with appropriate IP review where necessary. ■ NPI & MANUFACTURING READINESS ◦ Design for Manufacturing and Assembly (DFM/DFA): Identify design changes that improve manufacturability, simplify assembly, and create opportunities to reduce production costs. ◦ Supplier & Factory Alignment: Align engineering requirements and manufacturing documentation with supplier capabilities, process limitations, and achievable tolerances. ◦ Production Readiness & Risk Assessment: Identify design, tooling, assembly, and quality risks before manufacturing release, with practical mitigation and verification measures. ■ ENGINEERING DRAWINGS, GD&T & TOLERANCE ANALYSIS ◦ Production drawings and geometric dimensioning and tolerancing (GD&T) to ASME Y14.5 or applicable ISO GPS standards. ◦ Worst-case and statistical tolerance stack-up analysis, where appropriate, to assess fit, interchangeability, and assembly risk. ◦ Coordinated CAD models, drawings, specifications, and inspection requirements to support consistent manufacturing and quality control. ■ MECHANICAL ENGINEERING & FEA ◦ Structural, modal, and thermal simulation, selected according to the engineering problem and applicable assumptions. ◦ Material and geometry optimization to evaluate opportunities for weight reduction, improved performance, and lower material or manufacturing costs. ◦ Engineering calculations, failure-risk assessment, and verification planning to support defensible design decisions. ■ REVERSE ENGINEERING & SCAN-TO-CAD ◦ Editable, parametric CAD reconstruction from 3D scans, physical-part measurements, and available reference data. ◦ Legacy Component Reconstruction & Redesign: Reconstruct obsolete or undocumented parts and adapt designs to current materials, manufacturing processes, or functional requirements. ◦ Engineering models and supporting documentation prepared for tooling, machining, fabrication, and inspection. WHAT IT’S LIKE TO WORK TOGETHER You don’t need to define every engineering step before we begin. I’ll establish the next steps, take ownership of the agreed work, and provide weekly updates while keeping you involved in key technical decisions. INDUSTRIES & MANUFACTURING EXPERIENCE My experience spans industrial equipment, medical devices, hand tools, production tooling, power transmission systems, and injection-molded products. My practical manufacturing background includes work in foundries, machine shops, traditional, and CNC machining, fabrication, assembly, inspection, and quality control. I have also worked with manufacturing suppliers across China, Taiwan, Vietnam, the US, and Europe. This experience informs my approach to design feasibility, process selection, tolerancing, supplier communication, and the transition from engineering development to manufacturing. CLIENT FEEDBACK “Kehinde is a true professional, delivering high-quality work at lightning speed.” Legion PTE, Singapore “The best! Kehinde understands my needs perfectly and delivers satisfying results.” Hari Murad, Germany “A top-notch engineer who took my idea from napkin sketch to concept in days!” Samuel Castilla, USA READY TO GET STARTED? Share your product, current stage, and goal. A rough sketch, photographs, existing drawings, or CAD files are enough to start the conversation.

I am a mechanical engineer with a specialization in industrial design with strong skills in CAD, 3D modeling, and product design. I specialize in creating or turning ideas, sketches, or concepts into... Read more

I am a mechanical engineer with a specialization in industrial design with strong skills in CAD, 3D modeling, and product design. I specialize in creating or turning ideas, sketches, or concepts into functional and manufacturable designs, with experience in both creative concept development and technical engineering work. I have experience working with: • Product design & concept development • Plastic part design and DFM for plastic design • 3D modeling & CAD construction • Technical drawings & manufacturing documentation • 3D printing & prototyping • Multi-part assemblies & mechanical design • Graphic design & visual presentations I am detail-oriented, communicative, and focused on delivering high-quality work that meets your requirements. Whether you need help developing a new product, refining an existing design, or creating visuals for your concept, I’m ready to help bring your ideas to life.

Mechanical Design Engineer with experience in SolidWorks CAD modeling, product development and technical drawings. I specialize in: • 3D modeling of mechanical parts and assemblies • Product design f... Read more

Mechanical Design Engineer with experience in SolidWorks CAD modeling, product development and technical drawings. I specialize in: • 3D modeling of mechanical parts and assemblies • Product design for manufacturing and 3D printing • Reverse engineering and STL to STEP conversion • Technical drawings and documentation • Design improvements and modifications • Prototyping and concept development I work mainly in SolidWorks and pay special attention to manufacturability, functionality and clear communication. I am interested in long-term cooperation and always strive to deliver accurate and reliable results.

I’m a 3D designer and visualizer with 5+ years of experience in architectural visualization, interior and exterior design. I create high-quality renders that highlight atmosphere, light, and materials... Read more

I’m a 3D designer and visualizer with 5+ years of experience in architectural visualization, interior and exterior design. I create high-quality renders that highlight atmosphere, light, and materials with precision. I work in 3ds Max, Corona Renderer, ArchiCAD, AutoCAD, and Photoshop, combining technical accuracy with artistic expression. My portfolio includes residential and commercial projects — from modern apartments to private houses and architectural exteriors. I value deadlines, clear communication, and delivering visuals that help clients see their ideas come to life.

CAPABILITIES • Ideation • Concept Development • Facility layout initiation and co-ordination. • Client liaison for the purpose of collaborative design. • Design optimisation to incorporate value-addin... Read more

CAPABILITIES • Ideation • Concept Development • Facility layout initiation and co-ordination. • Client liaison for the purpose of collaborative design. • Design optimisation to incorporate value-adding criteria. • Application of mining and heavy industry experience. • Contribution of mining experience both underground and open cut operations including infrastructure and processing plants. • Experience with preparation of tender submissions, technical and financial evaluations. • Technical writing including operations and maintenance manuals, spare parts inventory and stores management systems equipment data sheets, technical specifications and design criteria. • Preparation of studies, reports and technical documents. • Management, project engineering, administration, procurement, planning and scheduling.

PROFESSIONAL PROFILE I have 16+ years of experience in Vehicle Integration, Exterior & Interior body design in the product line of truck and off highway vehicle. CORE COMPETENCIES • Vehicle Integr... Read more

PROFESSIONAL PROFILE I have 16+ years of experience in Vehicle Integration, Exterior & Interior body design in the product line of truck and off highway vehicle. CORE COMPETENCIES • Vehicle Integration - layout preparation, vehicle packaging and digital mockup (DMU) • Body design - Exterior & Interior art to design, concept development • Ergonomics – HMI, anthropometric layout task analysis, RULA, virtual ergonomics and cognitive • Idea Generation – brainstorming, SWOT analysis , Six hat thinking, TRIZ, scamper, and 6-3-5 • Software - AUTO CAD, Pro/E, CATIA V5, Alias Automotive design and sketch book pro

Structural and mechanical design engineer (MSc) with 25 years of experience, running my own engineering office in Istanbul since 2018. WHAT I DO - Product development: concept development, prototypin... Read more

Structural and mechanical design engineer (MSc) with 25 years of experience, running my own engineering office in Istanbul since 2018. WHAT I DO - Product development: concept development, prototyping, reverse engineering and design for manufacturing - Mechanical, machine and robot design: for example CHRAK, a smart tool-cart robot that follows its operator, with motorised drawers and voice control (built units exhibited at a trade fair) - 3D CAD models, assemblies, manufacturing drawings, renders and assembly animations (Fusion 360, Rhino, AutoCAD) - Structural analysis and FEA directly from your STEP/CAD model (Altair SimSolid, Ansys, SAP2000, RFEM): steel silos and hoppers, industrial steel structures, equipment platforms, frames and chassis - Medical device, automotive and consumer product assemblies; packaging; kiosks and play equipment - Boats, tiny houses and caravans: design and structure checks - Custom engineering calculation tools in Python Background: project manager, site manager and resident engineer on large construction and World Bank / EIB-funded projects, investment-project manager for 23 industrial companies. Confidential design work for defence-industry companies under NDA. Clear communication, fast turnaround and manufacturing-ready deliverables.

Hi, I am Saddam and I am a professional Rhinoceros 3D designer. I have experience of more than 4 years of using rhinoceros 3d for product and Industrial design, design for 3D printing, architectur... Read more

Hi, I am Saddam and I am a professional Rhinoceros 3D designer. I have experience of more than 4 years of using rhinoceros 3d for product and Industrial design, design for 3D printing, architectural modeling and product rendering using V-ray and Keyshot. I also do sketching for concept development. Iam willing to work on design projects based on Rhinoceros 3D software. Feel free to ask any additional information. Thanks

Industrial designer with 15+ years of experience and 40+ products taken from first concept to production. Founding partner of Venn Industrial Design Consultancy (Ankara, since 2014), where we treat de... Read more

Industrial designer with 15+ years of experience and 40+ products taken from first concept to production. Founding partner of Venn Industrial Design Consultancy (Ankara, since 2014), where we treat design as an evidence-based process that runs from user need to production reality. I specialise in the step where most projects stall: turning an approved concept into a product a manufacturer can actually build. My work covers concept development, design for manufacturing (DFM), sheet metal design with flat patterns, welded and bolted assemblies, structured assembly trees and production-ready documentation. Selected work includes surgical tables, surgical lights, aspirators and scrub sinks for hospitals; autonomous forklifts and transport platforms for robotics; a truck driver seat for the automotive industry; and smart locks, access devices and IoT products. Clients include Havelsan, Aselsan, Assan Hanil, Milvus Robotics, Inspital and Biosys. Havelsan recognised our studio as an Outstanding Supplier for work delivered to defense-industry standards. Recognition: Red Dot Design Award 2026 (Scrub Sink), A' Design Award 2014, plus 10 patents, 3 utility models and 18 registered designs. I also teach design studio at Atılım University and Ostim Technical University, and I am pursuing a PhD in Industrial Design at Gazi University. Every design decision is documented and justified, so clients know not only what was designed but why.

I am a results-driven Mechanical Engineer with strong expertise in 3D CAD modeling, product development, and advanced engineering simulations. I specialize in SolidWorks to deliver highly accurate, pr... Read more

I am a results-driven Mechanical Engineer with strong expertise in 3D CAD modeling, product development, and advanced engineering simulations. I specialize in SolidWorks to deliver highly accurate, production-ready designs including detailed parts, complex assemblies, manufacturing drawings, and optimized prototypes always tailored to meet client specifications, functionality, and cost targets. I bring extensive experience in ANSYS CFD and FEA simulations to validate and improve designs before manufacturing. My simulation services include structural stress analysis, thermal and heat transfer studies, modal and vibration analysis, and fluid flow simulations. These analyses help identify potential failures, enhance product efficiency, reduce development risk, and ensure compliance with real-world operating conditions. From concept development to final production files, I provide complete end to end engineering solutions with a strong focus on design for manufacturability (DFM), cost efficiency, and performance optimization.

I am a Mechanical Product Designer and CAD specialist with hands-on experience in 3D modeling, mechanical design, engineering drawings, product development, prototyping, and fabrication. I work with... Read more

I am a Mechanical Product Designer and CAD specialist with hands-on experience in 3D modeling, mechanical design, engineering drawings, product development, prototyping, and fabrication. I work with SolidWorks, Autodesk Inventor, AutoCAD, FreeCAD, and Blender to transform concepts, sketches, dimensions, and ideas into accurate 3D models, mechanical assemblies, and detailed technical drawings. My practical fabrication experience allows me to design with manufacturability, material selection, assembly, and real-world production requirements in mind. I am comfortable working on machine components, mechanical assemblies, product enclosures, equipment, prototypes, and custom mechanical designs. I also have experience with electronics, embedded systems, automation, and software development, which allows me to contribute effectively to electromechanical and connected-product projects where mechanical and electronic systems need to work together. Services I provide • 3D CAD modeling • Mechanical product design • Mechanical assemblies • Engineering and fabrication drawings • 2D to 3D conversion • Concept development • Product enclosure design • Machine and component design • Design for manufacturing • Prototype development • 3D-printing-ready models • CAD file conversion and modification • Reverse engineering from existing parts or dimensions • Mechanical and electromechanical product development I focus on producing accurate, practical, and manufacturable designs while maintaining clear communication throughout the project. My goal is to help clients move from an idea or concept to a professional CAD model, technical documentation, and a practical prototype-ready design.

Senior CAD/Product Design Engineer with 15+ years of experience in CATIA V5, automotive plastic components, trim design, 3D modeling and 2D drawing development. Experienced in concept development, com... Read more

Senior CAD/Product Design Engineer with 15+ years of experience in CATIA V5, automotive plastic components, trim design, 3D modeling and 2D drawing development. Experienced in concept development, component modification, assembly design, GD&T, tolerance stack-up, DFMEA, BOM, APQP/PPAP and design Engineering change I specialize in converting concepts, sketches and existing/reference designs into production-ready 3D CAD models and detailed engineering drawings. I can support projects from initial concept through detailed design, drawing release and design modifications. Worked for TATA,MAHINDRA and VW Project I am available for freelance CAD modeling, automotive component design, plastic product development and engineering drawing projects.**

Architect and Design Lead with 15+ years of experience in residential, hospitality, mixed-use, and masterplanning projects across Europe and Central Asia. Specialized in conceptual design, residentia... Read more

Architect and Design Lead with 15+ years of experience in residential, hospitality, mixed-use, and masterplanning projects across Europe and Central Asia. Specialized in conceptual design, residential developments, urban planning, feasibility studies, architectural competitions, and CGI-based project presentation. Experienced in delivering projects from early vision and spatial strategy through architectural development and design documentation. Project experience includes high-rise developments, villa complexes, luxury hospitality, office buildings, mixed-use developments, transport infrastructure, and urban masterplans. Services include: • Architectural concept design • Residential and villa design • Floor plans and layout optimization • Feasibility and massing studies • Revit drafting and BIM modeling • Architectural visualization support • Presentation and competition materials • Masterplanning and urban design

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, ther... Read more

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, thermal systems, and custom industrial machinery, working in compliance with European regulations and standards such as EN 13445, PED, AD 2000, and ATEX when applicable. My background includes the complete engineering lifecycle of industrial equipment: • Concept development and feasibility studies • Mechanical and thermal calculations • Pressure equipment design and verification • CAD design and detailing (SolidWorks, AutoCAD, Plant 3D) • Manufacturing drawings and technical documentation • Design optimization for safety, cost, and manufacturability • Support for certification, audits, and regulatory compliance I have extensive experience working with regulated environments, including pharmaceutical and process industries, where traceability, documentation quality, and compliance are critical. Typical deliverables I provide include calculation reports, Excel-based engineering tools, 2D manufacturing drawings, 3D CAD models, and technical documentation ready for internal reviews or third-party certification. I work closely with clients to translate functional requirements into robust, manufacturable engineering solutions, maintaining clear communication, realistic timelines, and a strong focus on engineering quality. Industries served include industrial equipment manufacturers, process engineering companies, pharmaceutical and biotech suppliers, and custom machinery builders.

With Over 3 years of experience as a 3D artist, I bring wealth of proficiency in the creating of complex and interesting 3D Designs. I have a proven track record to be adept at leading teams and manag... Read more

With Over 3 years of experience as a 3D artist, I bring wealth of proficiency in the creating of complex and interesting 3D Designs. I have a proven track record to be adept at leading teams and managing projects from concept to final product. Coming with a strong foundation in 2D illustration, with notable success in both freelance and team-based environments, I passionately aim at delivering high-quality visual work of CAD designs, Sculpting, Experiential Booth Designs, Organic Modeling, Surface Modeling, Product Modeling etc. I am well equipped with the following skills; Modeling, UV unwrapping, Retopology, Sculpting, Conceptualization, Texturing, Lighting, Rendering, Compositing, Illustration. I also have the following as some of my accomplishments; 1. Led a team of 3D artists in delivering high-quality 3D visuals of marketing products for clients (I.e., Pernod Ricard, Nigerian Breweries, Heineken, Desperados, Yves Saint Laurent, Guinness, Coca Cola, Fanta, Jameson, Martell etc.) 2. Spearheaded projects from concept development through to final renders, overseeing the entire pipeline. I got a Bachelors in English from The University of Lagos, Nigeria.