Hire the best freelance Additive Manufacturing expert designers for your company

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm... Read more

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm using Fusion 360 to create mechanical models, FEA, engineering drawing as well as generating g-code for CNC manufacturing. I also have knowledge in proper material selection for the parts based on the function, environment, cost, adaptability as well as service life of the part. My experience is mostly focused on the design of mechanical parts, mechanical analysis (FEA, material selection) and manufacturing (Machining, additive manufacturing). I have a bachelor's degree in mechanical engineering technology from Montana State University. I have been a member of a design competition offered by TechSoft3D.com. My design was concept electric jet engine for commercial airliner

Hi, my name is Ritesh and I am a mechanical engineer from Mumbai. Designing products from concept to reality is my forte. I have experience working in automobile and oil&gas industries, from preparing... Read more

Hi, my name is Ritesh and I am a mechanical engineer from Mumbai. Designing products from concept to reality is my forte. I have experience working in automobile and oil&gas industries, from preparing concepts to fabrication. I keep myself updated with the current trends manufacturing, which allows me to design for CNC and additive manufacturing. Looking forward to take on great projects and serve the world better.

Mechanical Design Engineer with over 6 years of experience, I specialize in developing and designing mechanical parts with precision and innovation. My expertise spans a wide range of skills including... Read more

Mechanical Design Engineer with over 6 years of experience, I specialize in developing and designing mechanical parts with precision and innovation. My expertise spans a wide range of skills including: 3D Modeling: Creating detailed and accurate 3D models. 2D Detail Drawing: Drafting comprehensive technical drawings. Manufacturing Drawings: Generating drawings optimized for production. Photorealistic Renderings: Utilizing Keyshot for lifelike visualizations. 3D Printing Design: Designing for additive manufacturing processes. Industrial Product Design: Developing products with a focus on functionality and aesthetics. PCB Enclosures: Designing enclosures tailored for electronic components. Metalwork and Fabrication Drawing: Expertise in metal fabrication techniques. Reverse Engineering: Analyzing and recreating existing designs. Optimizing Manufacturing Processes: Improving efficiency and cost-effectiveness. I leverage cutting-edge tools including Solidworks, AutoCAD, Fusion 360, and Geomagic Design X to deliver designs that are not only innovative but also optimized for manufacturability and efficiency. My goal is to collaborate closely with clients to transform concepts into tangible, successful products. Let's collaborate to bring your ideas to life and create something exceptional!

I am a detail oriented Mechanical Design engineer with hands-on experience in mechanical design, Design for Additive Manufacturing (DFAM), Finite Element Analysis (FEA) Computational Fluid Dynamics (C... Read more

I am a detail oriented Mechanical Design engineer with hands-on experience in mechanical design, Design for Additive Manufacturing (DFAM), Finite Element Analysis (FEA) Computational Fluid Dynamics (CFD),Rapid Prototyping, computer-aided manufacturing (CAM), Manufacturing drawings and design supports with over 5 years of remote and on-site support to engineering teams.

I have more than 15 years of Mechanical Design Engineering experience in the field of process engineering, piping/layout design, mechanical components, shipbuilding structural, rubber and plastic mold... Read more

I have more than 15 years of Mechanical Design Engineering experience in the field of process engineering, piping/layout design, mechanical components, shipbuilding structural, rubber and plastic mold design, CAD/CAM/CAE/Data Management. An Autodesk Certified Inventor Professional and Instructor; Certified in 3D Printing Revolution/ 3D Printing Application/ 3D Printing Software in Coursera; Strong interest in IoT, Additive Manufacturing, Embedded System (Arduino/Raspberry Pi), Robotics; Machine Learning I can provide you services; - 2D Drafting (AutoCAD DWG) - 2D Drawing and 3D Modeling (Inventor; Fusion 360; Onshape) - CAD conversions - Animation (Inventor) - Photorendering visit me at https://sg.▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a passionate and resourceful mechanical engineer with expertise in designing, analyzing, and implementing high-performance mechanical systems. I excel at utilizing cutting-edge tools to optimize... Read more

I am a passionate and resourceful mechanical engineer with expertise in designing, analyzing, and implementing high-performance mechanical systems. I excel at utilizing cutting-edge tools to optimize designs, conduct analysis, and ensure the reliability of systems. Collaborating seamlessly with cross-functional teams, I effectively communicate technical concepts and lead projects to success. I continuously seek opportunities to streamline manufacturing processes and stay updated on emerging trends such as additive manufacturing and robotics. Committed to sustainability, I integrate energy-efficient designs and renewable energy sources. If you need a proactive engineer who delivers innovative solutions and drives excellence, I am ready to join your team. Together, we can make a lasting impact in mechanical engineering.

I'm Mohamad, a Mechanical Design and Production Engineer with over 8 years of experience in developing and launching new products, as well as upgrading outdated ones. I am the owner of The SolidWorks... Read more

I'm Mohamad, a Mechanical Design and Production Engineer with over 8 years of experience in developing and launching new products, as well as upgrading outdated ones. I am the owner of The SolidWorks Expert (TSWE), which you can visit at www.thesolidworksexpert.com. I am a Certified SolidWorks Mechanical Design Expert and a Certified SolidWorks Additive Manufacturing Associate. I also hold Certified SolidWorks Professional credentials in several advanced fields, including: 1. Simulation (FEA) 2. Advanced Surfacing 3. Advanced Sheet Metal 4. Advanced Mold Tools 5. Advanced Weldments 6. Advanced Drawing Tools Throughout my career, I have assisted numerous companies across North America and Europe, offering expertise in product development, mechanical system design, material selection, stress analysis through hand calculations, DFM (Design for Manufacturing), DFA (Design For Assembly), FEA Simulations, CFD Simulations, and Reverse Engineering. I am passionate about helping startups and new companies take their first steps toward success by developing products in a scientifically sound, intuitive, and cost-effective manner. Delivering stunning and realistic 3D renderings and animations is a key part of my service, ensuring clients can effectively brand and grow their products. I leverage the latest hardware and software from Nvidia, utilizing the Nvidia Iray Engine to achieve top-notch results.

We are CAD/CAM/CAE consultants with over a decade of experience in Product Design, 3D modeling, Drafting detailing, sheetmetal, FEA, Reverse Engineering, Additive manufacturing (3d printing), Special... Read more

We are CAD/CAM/CAE consultants with over a decade of experience in Product Design, 3D modeling, Drafting detailing, sheetmetal, FEA, Reverse Engineering, Additive manufacturing (3d printing), Special purpose machine design. We use Solidworks, Inventor, Creo, NX, CATIA, Ansys for our projects. Domain industries for which we have done projects are Automotive, Plastic appliances, Sheet metal enclosures, Plastic component, Special purpose machines, General use items and accessories

Hitech CADD Services is an ISO 9001:2008 & 27001:2005 certified, leading BIM & engineering design support providing company functioning in India since 1992. With a team of 700+ professionals and excel... Read more

Hitech CADD Services is an ISO 9001:2008 & 27001:2005 certified, leading BIM & engineering design support providing company functioning in India since 1992. With a team of 700+ professionals and excellent infrastructure capabilities, the company has remained a valuable design support partner for Fortune 500s and SMEs in the construction, engineering, and manufacturing sector. We nurture business relations based on principles of commitment, fairness, integrity, and excellence, our business thrives on an excellence based approach. We offer 2D/3D cad drafting, CAD conversion services, CAD modeling services across the world. Choose us as a partner that certainty of success for your business growth. BIM Solutions 1: BIM Services: Development of BIM for LOD 100 to LOD 500 requirements, BIM coordination, clash detection and as-built modeling using Revit, Navisworks, Building Design Suite (BDS). 2: Architectural Services: 2D drafting, 3D modeling, and animation for architecture & interior design support utilizing 3Ds Max, V-Ray, Revit, and AutoCAD. 3: MEP Services: MEP Drafting, MEP Drawings, MEP Coordination, MEP BIM, Clash Detection Services with help of Revit, Navisworks, Building Design Suite (BDS). 4: Structural Services: 2D and 3D CAD modeling for structural steel detailing, structural analysis and construction documentation utilizing Revit. Engineering Solutions: 1: Mechanical Design & Drafting: Engineering design & drafting support for machines & tools, industrial equipment, sheet metal components, millwork, furniture and building products utilizing AutoCAD, SolidWorks, Solid Edge, Inventor. 2: Design Automation: 3D Model and assembly creation to support design automation, Auto generation of 3D models, drawings and documents, automated BOMs, quantity takeoffs, CPQ solutions and RFIs, CAD Customization using DriveWorks, Tacton & SolidWorks. 3: Reverse Engineering: Point cloud to CAD conversion, 3D modeling and design optimization for legacy design data through AutoCAD, SolidWorks, Pro-Engineer and Solid Edge. 4: Rapid Prototyping: Development of printer-friendly CAD models for different additive manufacturing requirements using AutoCAD, SolidWorks, Solid Edge, Pro-Engineer, Creo, Inventor. 5: CFD Services: Simulating fluid flow to understand product behavior for single and multiphase flow, heat transfer and aerodynamic analysis using ANSYS Fluent, ANSYS CFX, OpenFOAM. 6: FEA Services: Determining structural, thermal and dynamic stresses to predict product performance and optimize design utilizing ANSYS Professional NLS, ANSYS Mechanical and ANSYS LS Dyna. Industries We Serve 1: Building Construction 2: Building Products & Components 3: Fabricated Metal and Alloy Products 4: Auto Ancillaries 5: Plant Design Engineering 6: Infrastructure 7: Heavy Engineering Hitech CADD Services has delivered 2500+ projects to more than 1000 clients in a span of more than 25 years. With global offices at five different locations in the USA, UK, Canada, Europe, and Australia & APEC regions the company is increasingly establishing itself as an extension to support engineering & design development processes for construction companies, manufacturing organizations, EPC firms and engineering companies located across the globe.

- Certified Solidworks Proffesional - Experienced in Additive Manufacturing - Aerospace Components Design - Acoustic Enclosure Design - Structural Designing - Topology Optimization - Reverse Engineer... Read more

- Certified Solidworks Proffesional - Experienced in Additive Manufacturing - Aerospace Components Design - Acoustic Enclosure Design - Structural Designing - Topology Optimization - Reverse Engineering

Hi, I'm Aminu, a CAD designer with over 5 years of experience. My expertise lies in mechanical design, engineering analysis, material selection, design for manufacturing and additive manufacturing, an... Read more

Hi, I'm Aminu, a CAD designer with over 5 years of experience. My expertise lies in mechanical design, engineering analysis, material selection, design for manufacturing and additive manufacturing, and I'm proficient in CATIA, Solidworks, Fusion 360 and Inventor along side engineering analysis tools like Ansys, MATLAB and CFTurbo. I've had the privilege of working on a variety of projects, from manufacturing industries, automotive, biomedical and consumer products, and have consistently delivered exceptional results. I hold a masters degree in Production Engineering and i am a certified Solidworks expert, which have equipped me with the knowledge and skills needed to excel in this field. My passion for CAD design drives me to create innovative and effective solutions for every project I undertake. I'm currently available for new opportunities, and I'm excited to collaborate on your next project. Let's bring your design ideas to life!

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Hello, I'm Umut. As a self-learning designer, I have worked on various projects and participated in competitions for 5 years, besides, I am looking for new opportunities to improve myself in the profe... Read more

Hello, I'm Umut. As a self-learning designer, I have worked on various projects and participated in competitions for 5 years, besides, I am looking for new opportunities to improve myself in the professional field. As for my own personal story: Art and technology have always been two areas of my interest. Today, at the junction of these two areas, I am trying to improve myself as a designer focused on solving people's problems with products with strong aesthetics. I also do logo design and am interested in photography as a hobby. Although I do not see myself as a highly experienced professional designer, I believe that as I develop myself, I can contribute to other people in this field with a different perspective and I continue to work for this cause. I am always open to communication for various collaborations or business opportunities.

Skilled with incorporating design features required for most disciplines of manufacturing methods including: -Metal stamping, casting and machining -Plastic injection, vacuum and blow molding -Additi... Read more

Skilled with incorporating design features required for most disciplines of manufacturing methods including: -Metal stamping, casting and machining -Plastic injection, vacuum and blow molding -Additive manufacturing (FDM) Also skilled in product system design assembled with: -Welding (arc, resistance, laser) -Riveting -Threaded fasteners Other skills include: -Check fixture design -Weld fixture design -PowerPoint In-house capabilities*: CAD software: Solidworks 2025 Siemens NX Equipment: -3D FDM printing (ABS) 10"x10"x12" Stratasys Fortus 250MC -3D Scanning (Peel3) -Metal Fabrication (mig/tig/stick welding) plasma cutting, vertical knee mill. *Hourly rate will vary less

"Professional Mechanical Design Engineer with 5+ Years of Experience – High-Quality CAD & FEA Solutions Delivered Fast" Hello! I'm Abdelrahman Khedr, a mechanical design engineer with over 5 years of... Read more

"Professional Mechanical Design Engineer with 5+ Years of Experience – High-Quality CAD & FEA Solutions Delivered Fast" Hello! I'm Abdelrahman Khedr, a mechanical design engineer with over 5 years of experience delivering high-quality CAD models, engineering drawings, and simulation analyses for clients around the world. ✅ What I Can Do for You: 3D modeling (CAD) and 2D manufacturing drawings Structural, thermal, and dynamic simulations (FEA/CFD) Design for manufacturing (DFM), tolerance analysis, and GD&T Product development and prototyping (from concept to production) ⚙️ Tools I Use: SolidWorks, AutoCAD, Fusion 360, ANSYS, KeyShot, and more 🎯 Why Work with Me? Fast, precise, and production-ready designs Clear communication & on-time delivery I solve design problems efficiently, saving you time and cost 📩 Let’s Get Started! Send me your idea, sketch, or requirements – I’ll provide initial feedback and a time/cost estimate within 24–48 hours. I’m ready to bring your idea to life with high precision and creative engineering. Let’s make it happen! 🚀

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in... Read more

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in depth knowledge of the FDM process and how to optimise for: print speed, strength, and quality. Prize winner in many online 3D printing and design competitions, winning approximately £2000 worth of prizes in the past three years: Polymaker ‘3D printed hook tournament: Second place. A combination of mechanical engineering, creative design and DfAM to create the strongest possible 3D printed polymer hook (no closed loop) weighing less than 50g. The final design withstood over a 1 ton load. https://www.thingiverse.com/thing:4682845 https://youtu.be/7JOS1Cv07ts?t=831 Polypanels Design Competition: Second place. https://www.myminifactory.com/object/3d-print-polypanels-shaft-system-93600 https://youtu.be/Hs9tfpPQGmo?t=1989 . E3D Multi-material STL Competition: Second place. Design of a set of compliant pliers intended for multi-material FDM printing: https://www.thingiverse.com/thing:3522722

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thou... Read more

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thought it would be great to share my knowledge. As the saying goes, "If you're great at something, don't do it for free." Look forward to working with you!

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored prod... Read more

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored product, model and render a new product or concept, produce RFQ-ready technical drawings with full GD&T, or develop quality, easy-to-use tooling/jigs/fixtures for your manufacturing line, I can do it! I am a Certified SolidWorks Professional and an expert in Fusion360 - licenses for both of which I own. In particular, I excel at building parametric, equation-driven models and design tables at the part, sub-assembly, and top-level assembly levels. I am also experienced at parametrically linking Solidworks drawings for automatic information updates. My manufacturing experience includes injection molding, thermoforming, extrusion, acoustic felt, sheet metal, steel/concrete pipe, additive manufacturing, 3-axis CNC, and product assembly. I've reverse-engineered, designed, and revised hundreds of custom products and tools. I have worked the production floor myself, so I know what to look for and ask about when designing for production. I can build small- to mid-size mechanical prototypes, such as a small prototype refrigerator that I designed and built in the second half of 2022. I have the ability to produce parts via FFF printing. I can also assist you in locating quality vendors for tooling and production. Certifications: Certified Solidworks Professional in Mechanical Design (CSWP-MD) C-8SKX4GBT3R Certified Solidworks Professional Advanced - Sheet Metal (CSWPA-SM) C-F67ZHEX3WR Certified Solidworks Professional Advanced - Drawing Tools (CSWPA-DT) C-UA37YPGQKM Solidworks PDM Professional, by GoEngineer.

At XR MUSICA LTD, we have developed a digital therapeutic solution combining a Virtual immersive Musical Reality Intervention (ViMRI) and eXtended Reality (XR) music technology. Our intervention lever... Read more

At XR MUSICA LTD, we have developed a digital therapeutic solution combining a Virtual immersive Musical Reality Intervention (ViMRI) and eXtended Reality (XR) music technology. Our intervention leverages immersive musical experiences and conversational AI-guided environments, immersing users into tailored virtual settings based on personalised profiles, including likes, dislikes, and needs. Our idea is that this can lead to a faster and more stable acquisition of social and behavioural skills and a reduction of anxiety and mental health problems. As an early-stage seed (start-up company), all prototype development for our musical instrument and intervention has been exclusively developed by myself. As a highly skilled 3D and CAD design engineer, my advanced skills in rapid prototyping, rendering, animation and additive manufacturing are put to use whilst I embark on securing funding for my project.

Professional Designer for manufacturing particularly in Addtiive Manufacturing for more than 5 years. Also a business owner of Sutendar Design Studio and Manufacturing ( SutendarDSM) in Saudi Arabia a... Read more

Professional Designer for manufacturing particularly in Addtiive Manufacturing for more than 5 years. Also a business owner of Sutendar Design Studio and Manufacturing ( SutendarDSM) in Saudi Arabia and Indonesia. With SutendarDSM, EVERY DREAM IS TANGIBLE For more information and gallery : instagram : @sutendardsm

I am a CAD design professional with 2 years experience in Solidworks and 3 years in Fusion 360. My expertise is primarily in mechanical design. I have spent 7 years in aircraft maintenance working on... Read more

I am a CAD design professional with 2 years experience in Solidworks and 3 years in Fusion 360. My expertise is primarily in mechanical design. I have spent 7 years in aircraft maintenance working on turboprop engines and propellers which has given me a breadth of hands-on experience in constructional theory and part design. Over the past 7 years, I worked closely with engineers while analyzing technical drawings to improve parts and identify a root cause of failure. Furthermore, I have spent the last 3 years honing my skills in 3D printing on professional SLA printers. This knowledge has given me great insight into designing for additive manufacturing.

Mechanical design and CAD specialist with a Mechatronics Engineering background and over 4 years of hands-on experience in SolidWorks, 3D printing, and prototyping. Certified by Dassault Systèmes (CSW... Read more

Mechanical design and CAD specialist with a Mechatronics Engineering background and over 4 years of hands-on experience in SolidWorks, 3D printing, and prototyping. Certified by Dassault Systèmes (CSWA, Additive Manufacturing, Sustainability). I’ve led interdisciplinary R&D projects, participated on Bolivia’s first CubeSat and award-winning NASA HERC team, and developed functional parts for clients and research. Passionate about precision modeling, real-world engineering impact, and bringing complex ideas to life through CAD and prototyping.

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throu... Read more

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throughout my career, I've learned to design and model extensively in AutoCAD, Fusion, and other similar software like Blender or Catia. Please let me know if I can help with your design needs! In addition, I am a useful source for rapid prototyping and manufacturing.

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturin... Read more

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturing, injection molding, forming methods, and CNC milling » Author of educational series on designing for 3D printing, manufacturing, and assembly » Proficient modeler of home goods, accessories, jigs & fixtures, industrial parts, and more.

I’m a Mechatronic Engineer with 5+ years of experience in 3D design using Fusion 360 and Inventor. I specialize in design for manufacturing, 3D prototyping, and end-to-end product development. With ha... Read more

I’m a Mechatronic Engineer with 5+ years of experience in 3D design using Fusion 360 and Inventor. I specialize in design for manufacturing, 3D prototyping, and end-to-end product development. With hands-on experience from years of building functional parts for home and agricultural applications, I understand how to design for real-world use—especially in tough environments. I own and operate 3D printers for rapid prototyping and bring a strong background in electronics, including PCB and embedded system design. My solutions are always optimized for practical assembly, reliability, and cost-efficiency. My experience spans agricultural tools, mechanical assemblies, and consumer gadgets. I'm flexible, deadline-driven, and available for voice or video calls. Let’s turn your idea into a manufacturable reality.

I am 24 years old 3D modeller and freelance designer. I have four years of experience in doing Freelancing and have three years of Industrial Experience in Reverse Engineering & 3D Printing. I have ha... Read more

I am 24 years old 3D modeller and freelance designer. I have four years of experience in doing Freelancing and have three years of Industrial Experience in Reverse Engineering & 3D Printing. I have handled a large number of different projects across the globe, and throughout my career I have found that nothing satisfies me more than meeting new people, developing new relationships, solving problems and contributing to the overall growth. Some Specialities: * Certified Associate - Additive Manufacturing (CSWA - AM) from Dassault Systemes. * Certified Professional - Mechanical Design (CSWP) from Dassault Systemes. * Certified Professional Advance- Sheet Metal, Drafting, Weldments & Surfacing tools (CSWPA) from Dassault Systemes. * Certified user of 3D Scanner & Reverse Engineering Software (Geomagic suite) from RASCO Automotive Systems. * Certified in GrabCAD Print software from Stratasys. * Certified user for developing 3D Models using DS CATIA V6 from RASCO Automotive Systems. * Proficiency in developing Monochromatic realistic 3D Renderings and Animations using Luxion Keyshot. * Knowledge of other software like Adobe Photoshop, Adobe Indesign, Adobe Illustrator & Adobe After Effects.

I'm a professional designer, experienced 3d modeler and Mechanical Engineer with a self-driven passion for Product design, Advanced Manufacturing Technology and Computer-Aided Design for Manufacturing... Read more

I'm a professional designer, experienced 3d modeler and Mechanical Engineer with a self-driven passion for Product design, Advanced Manufacturing Technology and Computer-Aided Design for Manufacturing. I am dexterous and think in terms of results and objectives to achieve assigned projects in a sustainable way with strict adherence to design standards. AREA OF SPECIALIZATION INCLUDES: ✔ Product Design ✔ Surface modeling ✔ Sculpting ✔ 3d modelling of parts and assembly design, product Rendering, Animation ✔ 2d drawing (Manufacturing drawing) ✔ Simulation of mechanical part and system (Analysis) ✔ Design for 3d printing (Additive Manufacturing) ✔ Reverse Engineering, product modification and upgrades ✔ Design Calculation and Documentation ✔ Machine Design ✔ Research and development With my good communication skills, research ability and great attention to detail, your project finds expression. Thanks.