Hire Leading Tooling Design Freelancers

If you are looking for experts in the field of tooling design you’ve come to the right place. Cad Crowd is the ultimate source for top-rated freelance tooling design experts. Our job is to connect our clients with a tooling design freelancer capable of designing the best scheme for their product. We have designers that are carefully selected, qualified, trained and experienced and supported by our guarantee that your new tooling design will match your project’s specifications. Leave all the fears of online hiring aside and establish a professional relationship with a respected professional in the field of tooling design from Cad Crowd.

Tooling design is a broad, specialized area that belongs to manufacturing engineering. This type of design includes planning, analysis, design, construction and finally, the application of tools, techniques, and procedures required to boost manufacturing productivity. It is obvious that this type of design can be beneficial for a wide range of industries. When it comes to the tools, tooling design is focused on tools like cutting tools, work holding tools, extrusion dies, forging dies, sheet metal dies, injection molds and inspection and welding fixtures. 

The most important tooling design elements include robust design for high-speed manufacturing, design for low tooling care and maintenance, innovative and well-balanced mold design used for quick molding cycles and cost reduction with the help of innovative design in insert molding process. Of course, this is just part of the elements associated with this process. 

During the early stage of a tool design, professional designers assess every option they have to achieve an optimal tooling design. For instance, insert molded elements that include over molding of complex stamping requires adequate design engineering. This process can be made less expensive when the designer knows how to implement and incorporate laser welding, component assembly in the die, and grinding. A talented tooling design freelancer like the ones found on Cad Crowd will make sure that this job is done in a proper way.

The designers you can hire on Cad Crowd will work together with you over the entire tooling design process. This means that they will be there for the initial analysis and planning, but they will also be there for the designing and construction part. In some cases, they can help you with the application phase if needed. They were trained and qualified for this type of job, so you don’t have to worry about anything.

At Cad Crowd, we are proud of our community that includes top-rated tooling design experts that come from different countries across the world. As we said before, our mission is to connect clients with the best freelancers. These designers found on Cad Crowd are offering their talent at more than reasonable price.  You can pick these designers on your own or you can simply send us details about your project. We'll evaluate your needs and requirements and find the best individual for the task based on your specifications, and we'll provide you with a free quote. 

#371
Mauro
Member Since: 2014-05-04
Hello to everyone in the CAD Crowd Community and beyond from 'downunder' or from which vantage point you are viewing from. Firstly it's Great and Exciting to be part of this Vibrant and Talented global Community of Engineers and Designers. As an ex-ToolMaker and now a " Mechanical 3D CAD Designer ", with this blended combination of Skill-sets I've accumulated, has placed me in an Excellent position of employability. If anyone is interested in employing my services in 3D CAD modeling and analysis or Mechanical drafting, please feel free to contact me at mtomram1@iprimus.com.au Cheers Mauro
36 points
#629
CAD Drive @ 360°
Member Since: 2016-01-26
CAD DRIVE is a team of through professionals in the field of engineering services and one of the fastest growing engineering design service providers since 2007. It is a service partner to some small and medium scales manufacturing industry, with a range of engineering services and consultation for providing best solutions. CAD DRIVE is in newly launched in the engineering services business and its founders came from the Water Solution plant, HVAC, Oil and Gas industry and Automobile design and CAD/CAM/CAE industry with 8+ years of experience. We take pride in making our customers competitive at global level. We have highly skilled team of engineers that have vast knowledge of SolidWorks, Catia, Pro-E and AutoCAD design software; which helps in gaining immense understanding of maximizing these technologies for extraordinary results. Customer satisfaction is my main aim to reach my destiny. Our strength lies in understanding international design standards and we strongly believe in partnering with the customers for all his present and future needs.
25 points
#1169
Cadmen
Member Since: 2016-05-23
www.linkedin.com/in/plewandowski86 5 years of experience working as an manufacturing engineer and CAD designer in mechanical environment I have an own workstation Dell M6800 with a PTC Creo 3.0 license 2015 XI-now Outage Engineer, Warsaw Institute of Aviation, EDC, GE Power, Warsaw, Poland 2012 X-2015 X Tooling Specialist, CNH Industrial Polska, Manufacturing Department, Płock, Poland 2012 X-2015 X Tooling Specialist, CNH Industrial Polska, Manufacturing Department, Płock, Poland 2011 XI-2012 I Manufacturing Engineer, PPEB Kontener, Technical And Production Department, Płock, Poland 2011 VI-2011 XI Mechanical Engineer, Medra PPHU, Płock, Poland
10 points
#1170
Jacky Phan
Member Since: 2016-06-03
 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fanuc, Siemmen, Heidenhain... - Machine: Hass, Fidia, Makino, Matsuura... - Material: Aluminium, titanium, plastic... • 2D drafting • Shop document • Verify program • Fist article sheet • Maintenance old program, optimize for production  2009– 2011: CAD/CAM/CNC staff at International Corporation Trung Dung • 3D modeling from 2D drawing, sketch, picture, old model • CNC programming • Set up and operate • Inspection part
10 points
#1267
Machine Design Pro
Member Since: 2013-10-24
Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed electro-mechanical products, machinery and systems for a wide variety of industries. Generated winning proposals and developed customer relationships. Innovative conceptual designer. Inventor of patented industrial machinery products. Solid track record leading profitable new product development. Registered Professional Engineer. Specialties: Machine designer with proven abilities to drive innovative new product development
6 points
#1271
Stephen J. Cole
Member Since: 2014-01-01
Stephen J. Cole Results Driven Engineering Professional with a knack for bringing derailed projects back into focus and resurrecting dormant projects to produce profitable product through careful analysis and strategic implementation. Consistently successful in increasing profitability and quality through simplification where feasible, by utilizing the most current technology available and by improvising where traditional methods fall short of achieving the set goal. An uncompromising commitment to product quality and integrity while streamlining the design process through the utilization of solid modeling for design, FEA for performance prediction and rapid prototyping for design substantiation, resulting in high grade products and systems produced well within predetermined margins. Well versed in empirical testing of pre-production products and advanced testing of systems prior to system ATP (Acceptance Test Procedure) to further ensure the final design meets and exceeds performance expectations.
6 points
#1444
Vitor Milani
Member Since: 2014-12-10
5 points
#1980
lekhactrung
Member Since: 2015-01-11
I am Le Khac Trung from Vietnam. I am an CNC programmer, I am using Mastercam for 3 axis milling and Catia for 3&5 axis milling. I am looking for a part-time job. I have been programming with Mastercam and Catia for 6 years. My part sizes range from smaller than a fingernail up to around 100inx100in. Dimension tolerance is +/-0.01mm and 0/-0.01mm. Setups range from a couple tools per side with a few ops/setups up to 25 tools per side and 9 ops/setups. Materials are aluminum and steel, stainless steel, hardened steel 30-63HRC. I am working in US aircraft industry like BTL, Armo, Daso and Japan mold industry like Denso, Misumi. With customer from USA I am working through internet, I send them my CNC program and setup book and Japan customer I receive your 2d drawing and machine their product and give to them by air.
5 points
#2254
Andrew Carlson
Member Since: 2016-02-25
I would describe my strengths as being very proficient in various types of CAD Modeling & a knack for creative and efficient Product Design. I graduated with my B.S. in Mechanical Engineering from the University of Miami. I have years of experience designing custom tools for jet turbine engines along with some turbine hardware design. I frequently spend time creating, designing and modeling my own ideas and concepts. I also have experience working system design management and component integration.
5 points
#2270
megan.m
Member Since: 2016-03-19
Almost 10 yrs of experience in Mechanical Engineering spent working a variety of projects: reverse engineering military contracts, test stand development, new product design, and listing agency submittals (UL, ETL, TUV). Highly proficient in 3D modeling of parts and assemblies as well as creating 2D drawings using GD&T.
5 points