Hire Material Selection Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

▒▒▒▒▒▒ link for past projects: https://www.▒▒▒▒▒▒.com/freelancers/~01927bb67900547196 I am a versatile Mechanical Design/Simulation Engineer with 5 years of broad & extensive experience working wit... Read more

▒▒▒▒▒▒ link for past projects: https://www.▒▒▒▒▒▒.com/freelancers/~01927bb67900547196 I am a versatile Mechanical Design/Simulation Engineer with 5 years of broad & extensive experience working with clients in various industries like: • Accessories & Wearables • GPS Trackers • Mailing/Postage Saving • Automotive • Arms Weapon • Household/Furniture • HVAC/Floor Plan • 3D Printing • Bioengineering • Electronics/Enclosures • Cooling Systems & Heatsinks • And many more I specialize in: • CAD Drafting/Modeling/Simulation/Animation from rough sketches • Blueprint-Engineering Drawing-CAD (2D-3D) conversion • Rendering for both commercials and internal presentation • Spill, leak, water & heat-proof modeling & simulation • Multiple file conversion techniques ranging Photoshop's .ai to 3D printer's .stl. • Material selections & rendering • BOM & Revision change maintenance • 3D Printing techniques like .stl modification and additive manufacturing • Liquid, Spin & Injection molding techniques and clearance requirements for plastics and metals • Company logo creation/modification • 3D Modeling tutorial & guidance • I am also experienced in Adobe Photoshop & Illustrator creating posters & logos • And many more Leaving a project hanging/incomplete is the one thing I will never do. When we come to an agreement about the project, I pledge to never disclose the project under any circumstance unless I have your approval. I will never accept any project or send any proposal to a project without a careful consideration of my skills, field of expertise, time availability, project time frame and other essential factors to the success of the project. I will do my very best to accommodate whatever you need even if it is not under my scope of work or even if that means the project would be extended several times, which happens a lot. I am available 24/7 via ▒▒▒▒▒: jan.sunaryanto and email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Thank you in advance, I look forward to working with you :). Best Regards, Jan Bastian Sunaryanto http://jansunaryanto.branded.me ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm... Read more

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm using Fusion 360 to create mechanical models, FEA, engineering drawing as well as generating g-code for CNC manufacturing. I also have knowledge in proper material selection for the parts based on the function, environment, cost, adaptability as well as service life of the part. My experience is mostly focused on the design of mechanical parts, mechanical analysis (FEA, material selection) and manufacturing (Machining, additive manufacturing). I have a bachelor's degree in mechanical engineering technology from Montana State University. I have been a member of a design competition offered by TechSoft3D.com. My design was concept electric jet engine for commercial airliner

Growing up in an advanced mult-axis CNC machine shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theor... Read more

Growing up in an advanced mult-axis CNC machine shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theory and deep experience in the hands on / real world aspects of how precision industrial, medical, food processing, commercial, aerospace and consumer product products are conceptualized, prototyped and later produced and sourced. I have substantial experience in multi-axis CNC programming for high-speed, horizontal and vertical milling centers as well as multi-axis Swiss lathes (Citizen) via Mastercam. I am very well versed in a variety of materials and have years experience programming complex, multi-surfaced components to simple components, for short run prototypes, high speed, long run production and high-confidence lights out operations. In addition I have many years experience in CAD modeling and design via Solidworks 2018 including part, assembly and prints of which I also own one seat of latest 2018 version including Solid Works Simulation and the new, very impressive Solid Works Visualize. With Visualize I have the ability to not only design full solid models and assemblies but also create incredible, rendered real world pictures and images. I have designed, prototyped, sourced and brought to market several products from the ground up in various market segments including industrial, medical, food processing and aerospace. (including sheet metal, injection molded parts and of course precision machined parts with very tight tolerances). I currently own a Okuma MB-4000H Multi-Axis Horizontal Milling Center in which I can complete advanced protoypes to high speed, long run production runs. I am very confident that my education, real world experience and upbringing in a CNC environment has given me the ability to not only boldly design and or program components and products with disruptive, world class mechanical characteristics, it has given me the hands on experience to also design within the mindset of key variables like machine-ability and optimal material selection as this directly relates to final product cost. I have deep experience in optimization of solid model product design for machining and injection molding as well. I also hold several patents within the industrial and packaging spaces. I welcome any inquiry, as someone that truly enjoys this innovative space, I take projects with the assumption as if they were my own products. I embrace deep communication and work with the latest versions of all software I am versed in, with a deep emphasis on leveraging the amazing digital world we live in. I am willing to negotiate hourly rate based on the project.

I am a freelance CAD designer with a BS in Mechanical Engineering and an MS in Engineering Management, bringing over 10 years of experience in 3D modeling and product design. Proficient in SolidWorks,... Read more

I am a freelance CAD designer with a BS in Mechanical Engineering and an MS in Engineering Management, bringing over 10 years of experience in 3D modeling and product design. Proficient in SolidWorks, Creo, Fusion 360, and other CAD platforms, I have worked across industries including industrial, medical, defense, automotive, and aerospace. My expertise spans design for manufacturing (DFM), assembly (DFA), and inspection, with a specialized focus on design for additive manufacturing (AM) using metals, plastics, and ceramics. I help clients develop optimized, manufacturable designs that meet industry standards while pushing the limits of innovation.

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional... Read more

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional (CSWP). I have experience in part modeling for molded, machined sheet metal and die cast parts. I also have experience in surface modeling and assemblies and engineering drawings. I am also capable of aiding in material selection through calculation and/or simulation.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

I'm a mechanical engineer with 5+ years of experience in designing and developing parts and products for industries such as manufacturing, metalworking, and plastics. I go beyond 3D modeling by integr... Read more

I'm a mechanical engineer with 5+ years of experience in designing and developing parts and products for industries such as manufacturing, metalworking, and plastics. I go beyond 3D modeling by integrating design optimization, material selection, simulation, and manufacturing processes. I help turn ideas into real, production-ready products with a strong focus on efficiency, feasibility, and innovation.

I’m a mechanical engineer with hands-on experience in mechanical design, CAD modeling, and fabrication. Skilled in SolidWorks, CATIA, and AutoCAD, I’ve led projects from concept through prototype and... Read more

I’m a mechanical engineer with hands-on experience in mechanical design, CAD modeling, and fabrication. Skilled in SolidWorks, CATIA, and AutoCAD, I’ve led projects from concept through prototype and testing — including developing a maximum payload drone in partnership with Boeing. I also have R&D experience developing large-format metal 3D printers using induction heating at Rosotics. I bring practical problem-solving skills from years of building, repairing, and designing custom mechanical solutions.

19 years of SolidWorks experience Mechanical Design, Product Development, R&D, Material selection, Compression Spring design,Design for Injection Molding, Remote Independent Contractor

19 years of SolidWorks experience Mechanical Design, Product Development, R&D, Material selection, Compression Spring design,Design for Injection Molding, Remote Independent Contractor

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA s... Read more

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA software programs • Thorough understanding of design and analysis procedures, and proper material selection to ensure safety and optimal functionality of final product • Demonstrated proficiency in using SolidWorks, CATIA and Ansys through various school projects and past internship experiences • My capstone project required me to design a compact device, from a bulkier version, which harnessed nano aqueous ozone generator device components. The device intends to replace commercial detergents in the market with nano aqueous ozonated water to kill microbes • My internship at Albabtain Power and Telecommunication Co. saw me design components such as base flange, poles, and other accessories and assembled these components together, created drawing sheets ready to be used by fabricators, and worked on optimizing the components for optimal performance and cost reduction • At ITW, I used Ansys to compare the performance of a regular steel dowels used in concrete to a waveform shaped joint and conducted a full factorial DoE on the said waveform joint to determine the design with optimal results. Also, I suggested configurations and solutions to a production machine's rotary disc that failed due improper constraint based on intensive FEA analysis and design optimization

Experienced in Aerospace level Project Management for the manufacturing of end-use, production level components. Manager of teams including engineers, manufacturing groups, quality control teams, acco... Read more

Experienced in Aerospace level Project Management for the manufacturing of end-use, production level components. Manager of teams including engineers, manufacturing groups, quality control teams, account managers, specialized external vendors, and inside sales administrators. Proficient in communication both within internal teams/management, and as the primary point of contact for high-level clients (Raytheon, NASA, L3 Harris, etc.). Skilled orator, having given speeches to international groups of high-level manufacturing representatives and hundreds of classes on software functionality. Educated engineer with a knowledgebase spanning aerospace and automotive manufacturing principles, quality clauses/requirements, GD&T, and material selection. Father, Lifelong Learner, and Dungeon Master of multiple D&D 5e Campaigns.

• Autodesk Certified Professional in Autodesk Inventor Professional Software. (License # 00313355). • Autodesk Certified Associate in AutoCAD Software. (License # 00296190). • 5 years of experience... Read more

• Autodesk Certified Professional in Autodesk Inventor Professional Software. (License # 00313355). • Autodesk Certified Associate in AutoCAD Software. (License # 00296190). • 5 years of experience with CAD packages (SolidWorks, Autodesk Inventor, AutoCAD, Revit, CATIA V5, Pro E (Creo)). • 2.5 years of experience with CAE packages (HyperMesh, Abaqus, ANSYS, Optistruct, MATLAB). • 2.5 years of experience with Analysis (Linear & Non-linear Static, Dynamic, GD & T, Tolerance Analysis, Design Optimization). • Experience with Sheet metal, DFM, Bill of Materials, DFMEA, Sculpting, Metrology, Verification and Validation of Design. • Excellent written and verbal communication skills, organizational skills, Problem-solving skills, and multitasking skills. • Strong knowledge in advanced material selection for rapid prototyping, injection molding and 3D printing. • Proficient in Microsoft Word, Excel, Outlook, MS Office, Project, PowerPoint.

Experienced in complex machine design for automation and electromechanical applications. Strong understanding of pneumatic, hydraulic, and electronic systems. Focus on packaging excellent functional... Read more

Experienced in complex machine design for automation and electromechanical applications. Strong understanding of pneumatic, hydraulic, and electronic systems. Focus on packaging excellent functionality in an elegant form. Designs with manufacturing and assembly in mind.

With over 8 years of experience in mechanical design, mold/die tooling, machining, and sheet metal fabrication, I specialize in creating precision-engineered parts, enclosures, and custom mechanical s... Read more

With over 8 years of experience in mechanical design, mold/die tooling, machining, and sheet metal fabrication, I specialize in creating precision-engineered parts, enclosures, and custom mechanical solutions. Skills & Expertise: -3D CAD modeling & 2D technical drawings (SolidWorks, Fusion 360, AutoCAD, Inventor) -Sheet metal design, enclosures, and structural components -Product development from concept to production -Manufacturing consulting and sourcing solutions -CNC machining & rapid prototyping -Wire harness design & metal fabrication I have successfully worked with small businesses, large enterprises, and government contractors, helping them develop cost-effective, high-quality designs tailored for manufacturing and scalability. My expertise extends to optimizing designs for production efficiency, material selection, and assembly processes. If you're looking for an experienced mechanical designer or manufacturing consultant who can bring innovative, practical, and cost-effective solutions to your projects, feel free to connect!

I have always enjoyed tinkering with things. I remember my first success: In sixth grade I took apart a fully-functional remote controlled car and after putting it back together I was so excited that... Read more

I have always enjoyed tinkering with things. I remember my first success: In sixth grade I took apart a fully-functional remote controlled car and after putting it back together I was so excited that it actually worked! That success started a lifetime in the engineering world. I went on to get a BS in Aerospace Engineering at the University of Minnesota. I was fortunate in my career to be exposed to many parts of the manufacturing world - concept design, prototyping, design-for-manufacturing, material selection, metal and plastic molded part design, quality-by-design, 6-sigma, 5S, manufacturing machinery and processes, CAD 3-D design, CFD and FEA, and project management. Now I'm applying my skills to your project. Whether you're project is early concept, manufacturing launch, or somewhere in between, I will apply my education, experience, and creativity to your project, on-time and within budget - Mathew Torgerson

Hi there. Welcome to John O.T. 3D . You can check out my pro work here http://johnot.viewbook.com/album/johnot-3dmodel . I am a professional 3D Technical & Product designer of over 4 years with over... Read more

Hi there. Welcome to John O.T. 3D . You can check out my pro work here http://johnot.viewbook.com/album/johnot-3dmodel . I am a professional 3D Technical & Product designer of over 4 years with over 100 successful clients. I have experience with elite universities, Fortune 500 companies, and visionary entrepreneurs. I am avid lover of 3D with specialization in Data to Prototype 3D design, Product design, Toy design, Consumer Product Design, and Industrial Design. I have extensive experience in the field and work with visionary minded entrepreneurs, startups, universities, and large scale business operations. For further introduction please review a sample walkthrough of my 3D services. I look forward to working with you! STAGES - A project of this nature will have a few steps. If we work together on each step I can design & produce the product(s) you desire with the correct specifications. 1. PrePro- To exact firm measurements, it is first smart for us to isolate the correct production methods and optimization requirements for the final product(s). Material selection, thickness requirements, Bounding Boxes, and Volume are all necessary ingredients in this process. I can, in this preliminary phase, supply useful and applicable knowledge. This will pre-tell the printing cost and allow us to pick the best material and 3d printing house. 2. 3D Modeling- I will be able to design the various model(s) you've suggested. I use a combination of BLENDER, RHINO, MESHLAB, and NETFABB to create, edit, and check models. Each model at this stage will have been checked for printing capability. Questions about aesthetic, structure, and dynamic usually arrive during this stage. At the conclusion of this phase specifications and look are nailed down and readied for 3d printing. 3. 3D Print Formatting - During this last stage model(s) are checked for errors, (thin walls, holes, bad normals, floating pieces, etc.) I send all model(s) through a verified test printability test to ensure 100% printability. Models are thickened, sized and cleaned and given the green light at the end of this stage. 4. Let's Chat! Please view the attached. I have prepared a detailed guide that addresses many topics such as rates, deadlines, and correspondence expectations. This doc will outline how we may best work together on the project. I can happily forward you this term sheet as I see interest to move forward.

My passion is product design; I love taking on challenging design problems and developing robust, cost effective solutions. I have 7 years of experience in mechanical design; in that time, I’ve worked... Read more

My passion is product design; I love taking on challenging design problems and developing robust, cost effective solutions. I have 7 years of experience in mechanical design; in that time, I’ve worked on projects ranging from candle molds and custom guitar picks to exhaust manifolds and lube pumps. I’m proficient in 3D CAD design, and I currently use Fusion 360 for freelance work. Specialties: • Design for fluid flow: Optimized geometry for pulsed (like an exhaust manifold) and steady state (like coolant passages) flow conditions. Do not currently possess CFD analysis capability for freelance work, but have years of experience optimizing flow passages for high performance applications, and can apply that experience to any fluid design project. • Design for 3D printing: There is a common misconception that 3D printers can create any shape that can be imagined. While 3D printing can create shapes that are impossible with traditional manufacturing techniques, it has its own, unique limitations. Without a solid understanding of these limitations and how to account for them, 3D printing projects can become very frustrating very fast. • Design of mechanisms: Designing a system of parts that work together requires a considerable body of knowledge on top of simple part design. Assemblies must be robust against manufacturing variation, assembly variation, and have appropriate surface finishes in order to ensure that the parts will always go together and function as intended. • 2D drawings and GT&T: In most cases, the 2D drawing is still the legal document that defines the part; developing a drawing with a robust datum structure and proper tolerances is a critical part of turning an idea into a producible reality. Other proficiencies: • Design for sand casting: material selection, optimizing parting lines, core design. • Seal design: radial and face seal o-ring interfaces, as well as gasket sealing flanges. • Bolted joint design: proper bolt size and grade selection, grip length, thread engagement.

SCD offers many services in designing ideas for new and existing products. With the use of SolidWorks we can provide you with solutions in the form of 2-D prints, 3-D CAD files, STEP files, and more.... Read more

SCD offers many services in designing ideas for new and existing products. With the use of SolidWorks we can provide you with solutions in the form of 2-D prints, 3-D CAD files, STEP files, and more. Ask about SCD’s network! We can keep your ideas moving with our vast connections to save you money and time; Material Selection, 3-D Printing, Laser Cutting, Welding, Injection Molding, etc.

-Outgoing professional that is highly motivated to learn and has a passion for design -University of California, Irvine (B.S. in Mechanical Engineering) -Experience designing automated equipement -Sim... Read more

-Outgoing professional that is highly motivated to learn and has a passion for design -University of California, Irvine (B.S. in Mechanical Engineering) -Experience designing automated equipement -Simulation skills to see if a product will work before building -Prototyping expert -Manufacturing experience -Simplistic Design to allow for cheaper manufacturing -Material selection expertise

My name is Aaron Wilz and I am a mechanical engineer with over 5 years of experience in a fast paced, industry leading high quality design environment where I am actively working on consumer products.... Read more

My name is Aaron Wilz and I am a mechanical engineer with over 5 years of experience in a fast paced, industry leading high quality design environment where I am actively working on consumer products. My background is in mechanical engineering design and analysis of custom plastic injection molded parts, diecasting, and metal stamping/forming. This includes everything from conceptual design and material selection, through design tolerance and stress analysis, to prototype and production level tooling. Prior to becoming an engineer, I worked through college as a TIG welder and offer a hands-on approach to problem solving and prototyping.

I'm a Mechanical Engineer with 15+ years of experience and a Bachelor of Science in Mechanical Engineering from the University of Texas at Arlington, an ABET-accredited institution. I specialize in pr... Read more

I'm a Mechanical Engineer with 15+ years of experience and a Bachelor of Science in Mechanical Engineering from the University of Texas at Arlington, an ABET-accredited institution. I specialize in product and tooling design, spanning the entire process from concept to manufacturing. I also possess a solid understanding of the business fundamentals that drive my professional success. As the inventor of three U.S. utility patents (Nos. 9,820,581; 10,104,982; 10,568,436), I'm dedicated to advancing the boundaries of mechanical engineering and enthusiastic about exploring collaborations and innovations.

I am an experienced and creative hand-on engineering consultant who can communicate ideas clearly to my clients. My experience and skill sets covers a broad range of services and industries. I work fr... Read more

I am an experienced and creative hand-on engineering consultant who can communicate ideas clearly to my clients. My experience and skill sets covers a broad range of services and industries. I work from napkin sketches and ideas to prototypes and through production and distribution, I can provide manufacture-able real-world solutions. I will help you. I'm an inventor and entrepreneur at heart and passionate for all things technical, especially tangible things. My desire to create and understand how and why lead to me obtaining a degree in Mechanical Engineering studying mechanical systems and manufacturing. With this core skill set, I am constantly inventing, creating, and building new things finding success with each project. Working as a freelancer has given me the ability to work without the chains of a corporate environment and work in a way the flows much easier my clients and myself. My services include: product development, product and machine design, material selection, process selection, process design and management, mass production, tooling and fixture design, CNC programming, patent assistance, scripting, automation, micro-controllers, rapid prototyping, 3D and 2D Models, drafting, engineering design, stress testing, FEA Finite Element Analysis, web development, welding, Quality Control, industrial engineering, manufacturing, FileMaker and database development, graphics, catia, solidworks, autocad, rhino, CAM, CAE, DFM, DFA, and rendering.

Extensive Experience in Process Design & Project Management in Power, Pulp & Paper Industry, and Other Heavy Industrial Process Industries for both Greenfield and Brownfield settings on small, mid-siz... Read more

Extensive Experience in Process Design & Project Management in Power, Pulp & Paper Industry, and Other Heavy Industrial Process Industries for both Greenfield and Brownfield settings on small, mid-sized and large projects. Technical expertise in Detailed Design and Design Execution with Process Systems, Fluid Systems, Thermodynamic Systems, Static and Rotating Equipment Sizing and Selection; Material Selection, System Performance Definition, Performance Testing, and Over-Pressure Protection Design. Thoroughly versed in Coordination of Work; Quality Specification, Control & Assurance; Construction Management; Contract Development & Negotiation; Contract Oversight; Significant Experience in the Interpretation & Application of Local, National & International Codes and Standards; Certified Six Sigma Yellow Belt (Bechtel) and Greenbelt (General Electric).