Hire Machining Designers in United States

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a principle I... Read more

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a principle I live by and I understand that designs should be manufacturable. I have knowledge of and experience with various fabrication processes including but not limited to 3D printing, machining, and welding. My professional certification was given to me by Texas after rigorous testing and peer review. My area of testing was in Machine Design and Materials. I can perform FEA analysis and make sense of the results, allowing me to make good engineering recommendations for a given problem. I have spent the majority of my professional career designing dP (differential pressure) flow meters in accordance to ASME Boiler and Pressure Vessel Code as well as the accompanying ASME B31 series. I am very familiar with reading codes and standards and designing accordingly. This experience has also given me a strong understanding of GD&T. I am a good fit and so are my designs.

Mechanical Engineer based in Houston, Texas, USA with extensive experience in design and drafting. Proficient in SolidWorks with strong analytical skills, and a history of innovative solutions to comp... Read more

Mechanical Engineer based in Houston, Texas, USA with extensive experience in design and drafting. Proficient in SolidWorks with strong analytical skills, and a history of innovative solutions to complex problems.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

My company, Next X Design is the perfect partner for Established Manufacturing companies, Entrepreneurs, and startups on developing new products. One-stop service from Solidworks Design, prototyping,... Read more

My company, Next X Design is the perfect partner for Established Manufacturing companies, Entrepreneurs, and startups on developing new products. One-stop service from Solidworks Design, prototyping, through ongoing Engineering Support. Expert in developing physical products that involve Steel Fabrication, Sheetmetal, 3D printing and CNC machining. www.nextxdesign.com to see more! Thank you again.

I am an industrial designer based in Northfield, Minnesota, United States. I have worked in various manufacturing facilities for the last decade, including casting, machining and general sheet-metal f... Read more

I am an industrial designer based in Northfield, Minnesota, United States. I have worked in various manufacturing facilities for the last decade, including casting, machining and general sheet-metal fabrication. I have spent the last 15 years working with various CAD programs, primarily SolidWorks, creating and manipulating models for the medical, energy and aerospace industries. I am capable of reverse engineering both 3D solid models and 2D drawings from existing components and/or drawings. I currently hold certification as a SolidWorks Certified Professional, with specialized certifications in mold design, advanced surfacing and sheet metal.

Mechanical Design Engineer Certified SolidWorks Expert 10+ years SolidWorks Experience 6+ months CAD Crowd Freelancing Experience BS Mechanical Engineering with professional experience in OEM and Re... Read more

Mechanical Design Engineer Certified SolidWorks Expert 10+ years SolidWorks Experience 6+ months CAD Crowd Freelancing Experience BS Mechanical Engineering with professional experience in OEM and Reverse Engineering prototype and design. Wide range of product design knowledge including sheet metal structures, weldments, injection molding, casting, machining, and more. Worked on a high level engineering team of over 40 cross-fuctional engineers that release highly regulated casino gaming cabinet hardware and software for commercial use worldwide. Bring products from ideas to production ready parts and assemblies prepped for mass production. Consistently deliver accurate models and manufacturing drawings to companies to help bring their products to market quicker and with less risk.

Over 6 years of hands-on experience. Majoring in Automation Engineering. In 2012 - Became a Certified Solidworks Associate. - Employed as a CNC Machine Operator with Solar Precision Products in... Read more

Over 6 years of hands-on experience. Majoring in Automation Engineering. In 2012 - Became a Certified Solidworks Associate. - Employed as a CNC Machine Operator with Solar Precision Products in Burbank, California. In 2014 - Employed as a designer with Glenair Inc. In 2016 - Graduated with an AS degree in Engineering Design, from Pasadena City College. - Certified CAD/CAM Technician, from Pasadena City College - Transferred to California State University, Northridge. 2017 - Manager for Lobart Company, a Manufacturer, design firm, and machine shop, in Pacoima C.A. In 2018 - Drafting and Design Independent Contracting with, Hamilton 3D in Santa Clarita, Cross-up Welding in Santa Clarita, Clear Console in Valencia, and more.

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photoni... Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm... Read more

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm using Fusion 360 to create mechanical models, FEA, engineering drawing as well as generating g-code for CNC manufacturing. I also have knowledge in proper material selection for the parts based on the function, environment, cost, adaptability as well as service life of the part. My experience is mostly focused on the design of mechanical parts, mechanical analysis (FEA, material selection) and manufacturing (Machining, additive manufacturing). I have a bachelor's degree in mechanical engineering technology from Montana State University. I have been a member of a design competition offered by TechSoft3D.com. My design was concept electric jet engine for commercial airliner

Growing up in an advanced mult-axis CNC machine shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theor... Read more

Growing up in an advanced mult-axis CNC machine shop and furthering my experience with studies in International Industrial Product Design Marketing and Mechanical Engineering I bring 25 years of theory and deep experience in the hands on / real world aspects of how precision industrial, medical, food processing, commercial, aerospace and consumer product products are conceptualized, prototyped and later produced and sourced. I have substantial experience in multi-axis CNC programming for high-speed, horizontal and vertical milling centers as well as multi-axis Swiss lathes (Citizen) via Mastercam. I am very well versed in a variety of materials and have years experience programming complex, multi-surfaced components to simple components, for short run prototypes, high speed, long run production and high-confidence lights out operations. In addition I have many years experience in CAD modeling and design via Solidworks 2018 including part, assembly and prints of which I also own one seat of latest 2018 version including Solid Works Simulation and the new, very impressive Solid Works Visualize. With Visualize I have the ability to not only design full solid models and assemblies but also create incredible, rendered real world pictures and images. I have designed, prototyped, sourced and brought to market several products from the ground up in various market segments including industrial, medical, food processing and aerospace. (including sheet metal, injection molded parts and of course precision machined parts with very tight tolerances). I currently own a Okuma MB-4000H Multi-Axis Horizontal Milling Center in which I can complete advanced protoypes to high speed, long run production runs. I am very confident that my education, real world experience and upbringing in a CNC environment has given me the ability to not only boldly design and or program components and products with disruptive, world class mechanical characteristics, it has given me the hands on experience to also design within the mindset of key variables like machine-ability and optimal material selection as this directly relates to final product cost. I have deep experience in optimization of solid model product design for machining and injection molding as well. I also hold several patents within the industrial and packaging spaces. I welcome any inquiry, as someone that truly enjoys this innovative space, I take projects with the assumption as if they were my own products. I embrace deep communication and work with the latest versions of all software I am versed in, with a deep emphasis on leveraging the amazing digital world we live in. I am willing to negotiate hourly rate based on the project.

Hello. I am Gershom from NewDev Technologies, LLC. I am a Mechanical Engineer (Bachelor of Science in Mechanical Engineering). I am a certified Solidworks Professional and certified in the Fundamental... Read more

Hello. I am Gershom from NewDev Technologies, LLC. I am a Mechanical Engineer (Bachelor of Science in Mechanical Engineering). I am a certified Solidworks Professional and certified in the Fundamentals of Engineering. I have seven years of experience in mechanical engineering and ten years of experience in mechanical design with extensive experience using Solidworks, AutoCAD, and Pro-E. I am capable of producing prototypes of designs via 3D printing, CNC machining, and other fabrication techniques that NewDev Technologies, LLC has direct access to. Today, advances in technology happen at an accelerated rate. New developments lead to exciting possibilities and provide opportunities for everyone to bring to life that which was once thought impossible. In the pursuit of pushing these new ideas to applications, NewDev Technologies, LLC aims to be your affordable source of high quality engineering design, services, and support using advanced knowledge, experience and capabilities. NewDev Technologies - at the forefront of technology.

About Me: In the past twenty plus years, working within large manufacturing facilities, I gained a considerable amount of experience. During this time I have been exposed to various complex mechani... Read more

About Me: In the past twenty plus years, working within large manufacturing facilities, I gained a considerable amount of experience. During this time I have been exposed to various complex mechanical, tooling and manufacturing problems and have gained a tremendous amount of hands on knowledge for solving these problems, giving me the necessary skills and abilities to improve and correct such problems that impede a company causing it to have lower quality and productivity. I have strong skills in the areas of tool making, tool design, product design, electronics, CAD, and automated machinery along with a proven ability to manage a company and feel that these qualities will make a positive impact on your facility. I look forward to hearing from you in the near future. Best Regards, Eddie

Boston-based Mechanical Engineer with 4+ years experience in mechanical design & CAD. - Advanced 3D modeling skills; able to produce parts, assemblies, and drawings in Onshape. - Expertise in design... Read more

Boston-based Mechanical Engineer with 4+ years experience in mechanical design & CAD. - Advanced 3D modeling skills; able to produce parts, assemblies, and drawings in Onshape. - Expertise in designing for 3D Printing and CNC machining. - Strong writing skills, able to create sketches, presentations, reports, and mechanical drawings. - Able to print and ship parts using in-house 3D Printers if needed for the project. - Experience in part sourcing as well as working with fabrication vendors. Available for free consultations and happy to answer any questions you may have!

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and... Read more

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and intellectual stimulation of the the work that I enjoyed for my entire career. So, I formed an LLC and purchased licenses for CATIA and Solidworks and have been performing contract tool design projects for former employers and new customers alike for several years. The types of tools I have designed include: o Composite airframe components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs) o Jigs and fixtures: major and sub-assembly tools, drill jigs, installation fixtures o Tooling for Composite air-frame components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs, etc.) o Weld fixtures, electron beam welding tools o Ground support equipment o Machining holding fixtures o Conceptual tool designs for manufacturing planning o Inspection tools o Test fixtures

5+ years of work experience in engineering roles relating to all stages of the product development process (brainstorming, prototyping, testing, manufacturing, inspection). Industry knowledge is stron... Read more

5+ years of work experience in engineering roles relating to all stages of the product development process (brainstorming, prototyping, testing, manufacturing, inspection). Industry knowledge is strongest in Consumer Goods, Defense Contracting, and Aerospace manufacturing with process knowledge of FDM, DMLS, SLA, Injection Molding, and general machining. Corporate certifications include ISO9001, AS9100, and ITAR.

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: En... Read more

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: Engineering Materials, Statistics & Probability, Manufacturing Operations, Dimensional Analysis, Modelling, 3D CAD, Test Analysis, Communication, Prototype Development, Design Improvements and Optimization, Machining and Fabrication Process, Project Management, Materials Research, Troubleshooting, Fabrication, Modeling Contact Daniel regarding design and manufacturing engineering opportunities.

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in... Read more

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in materials and machine design and specializes in custom mechanical assemblies and automated systems. Specific capabilities include mechanical and electromechanical design, CAD, FEA and design validation, component and assembly manufacturing, procurement, assembly, and testing. Dietrich worked as a Systems Engineer, mechanical engineer, and sr. mechanical engineer. He has developed custom tooling for unique and specific projects. He has designed and manufactured a large scale metal 3D printer. Additionally he has designed equipment for automating processes to speed up manufacturing or reduce labor intensive applications. Dietrich is able to design with a wide variety of materials including alloy steels, aluminum, Inconel and other nickel-based alloys, carbides, and a wide variety of polymers. He has experience with mechanical systems such as linear actuators, miniature and large scale electric motors, combustion engines, pulleys, gears, solenoids, weldments, belts and other drivetrain components. His manufacturing capabilities include CNC milling, CNC turning (lathe), electro-discharge machining, welding, and 3D printing in both polymers and metals. Deliverables include consultation, design, CAD models, 2D manufacturing drawings, manufacturing of custom parts and assemblies, sourcing and selection of off-the-shelf parts, and component and assembly testing and validation.

I am a Mechanical Engineering major at Ohio State University, and I lead the Drivetrain team for the OSU Baja SAE team. I have completed design projects for Baja from initial design concept to manual... Read more

I am a Mechanical Engineering major at Ohio State University, and I lead the Drivetrain team for the OSU Baja SAE team. I have completed design projects for Baja from initial design concept to manual and CNC machining, so I understand design for manufacture principles I have also completed some small personal 3D printing projects.

I can take your napkin sketch to full 3D model and prints - 20 years as a design engineer/project manager in packaging, products and tooling, working directly with customers and coordinating proje... Read more

I can take your napkin sketch to full 3D model and prints - 20 years as a design engineer/project manager in packaging, products and tooling, working directly with customers and coordinating projects with tooling and manufacturing. Experience in SolidWorks, ProE and Mastercam for machining. - - 17 years assisting customers, internal company departments and suppliers regarding design matters such as project status, possible design challenges, revision issues and necessary raw material/tooling components. Also have 8 years as an injection mold maker.

I am a Mechanical and Drafting Engineer with a background in product development and marketing strategies. I own a local design firm with which I work primarily in the firearms and defense industry de... Read more

I am a Mechanical and Drafting Engineer with a background in product development and marketing strategies. I own a local design firm with which I work primarily in the firearms and defense industry designing and producing high quality aftermarket parts and assemblies for both private and commercial markets. I currently hold 3 patent pending designs/products in the firearms industry with 3 more being added in the second quarter of 2017 with new product releases. I have a keen understanding of metallurgy, product development, and working within manufacturing practicality guidelines as well as an individual manufacturer's machining capabilities. 3D modeling is where my skills are best put to use as I love creating products no matter their complexity or the overall challenge in front of me. I am able to design parts or products of any size quickly and efficiently. I also have the ability to quickly create basic models with complete assemblies or sub-assemblies according to your needs and specifications.

Looking for 3D design side work. I specialize in SolidWorks and I am certified in SolidWorks Mechanical Design. Willing to work on hourly rate and working schedule, I’m available all day. I have forma... Read more

Looking for 3D design side work. I specialize in SolidWorks and I am certified in SolidWorks Mechanical Design. Willing to work on hourly rate and working schedule, I’m available all day. I have formal training and on the job training in 3D design and CNC programmingand machining.

ive been studying drafting for 8 years and have been studying engineering my entire life. I got my CSWA at 16 and my CSWP at 18. I'm currently studying CNC machining in Florida and can draft with subt... Read more

ive been studying drafting for 8 years and have been studying engineering my entire life. I got my CSWA at 16 and my CSWP at 18. I'm currently studying CNC machining in Florida and can draft with subtractive or additive manufacturing in mind. I can also provide full manufacturing methods sheets, and a bill of materials. I have experience with UL standards and NSF standards.

Gud Mould Industry Co., Ltd. is a professional manufacturer of plastic injection molding and die casting mould. Founded in 2007, Gud Mould Industry Co., Ltd. covers an area of 2500 square meters and h... Read more

Gud Mould Industry Co., Ltd. is a professional manufacturer of plastic injection molding and die casting mould. Founded in 2007, Gud Mould Industry Co., Ltd. covers an area of 2500 square meters and has more than 100 experienced staffs, of which more than 30 with 20 years of experience in plastic engineering and die-casting. To meet customers' higher requirements for product quality and greater demand for mould manufacturing, we constantly introduce advanced equipment, technology and talents at home and abroad to enhance our production means and technical support, constantly expand processing area to increase our production capacity. At present, Gud Mould has a large number of international advanced CNC machining centers, EDM, WEDM, milling machines, tool grinders and other precision die and mould processing equipment; imported spectrometers, metallographic analyzers, water capacity detectors, coordinate detectors, gauges and other international advanced detection equipment and instruments. Gud Mould's die design and production all realize computerization, apply International advanced AutoCAD, Pro/E, UG, Cimatron, MASTERCAM, etc. File of IGS, DXF, STP, PORASLD and so on are acceptable here. After receiving drawings and data from customers, engineers of Gud Mould design and program first. Manufacture, produce and inspect them strictly according to drawings of mould engineering. All manufacturing processes realize digitalization of drawings, so as to ensure stability of high precision and high quality of dies. All materials of die are made of high quality steel and precision standard die base, which ensures service performance and life of die. In line with principle of customer first, we provide the best quality, delivery date, quality service and reasonable price, absolutely guarantee interests of customers, and provide confidentiality commitment to all technical information of customers. Gud Mould Industry Co., Ltd. has always adhered to business philosophy of "people-oriented, quality first", and has been making progress and developing steadily. Although Gud Mould is medium-sized, it has been recognized by well-known domestic enterprises such as Chang'an, Changfei, Hafei, Lifan, Ford in China, and has established a good reputation among domestic customers. In 2018, we set up overseas department, which mainly develops overseas markets. We sincerely welcome you to visit our company and expand your business!

I’m a mechanical designer with 20+ years of CAD and product development experience, specializing in SolidWorks part and assembly design, reverse engineering, and 3D printing. My background spans manuf... Read more

I’m a mechanical designer with 20+ years of CAD and product development experience, specializing in SolidWorks part and assembly design, reverse engineering, and 3D printing. My background spans manufacturing, engineering, and IT, giving me a unique perspective on both design precision and practical execution. Highlights: Mechanical Design: Created 3D models, assemblies, and technical drawings for prototypes, production parts, and custom equipment. Reverse Engineering: Converted legacy parts and sketches into precise CAD models, often optimized for CNC machining, sheet metal, or 3D printing. Product Development: Delivered functional prototypes, BOMs, and DFM/DFA improvements to reduce cost and lead time. Manufacturing Support: Worked directly with vendors and production teams to ensure manufacturable, cost-effective solutions. Engineering Leadership: Managed cross-functional projects, balancing design, quality, and delivery in industries ranging from lab automation to firearms manufacturing. Specialties: SolidWorks 3D Modeling & Assemblies Reverse Engineering & Part Conversion 3D Printing & Prototyping Manufacturing Design (Sheet Metal, Machining, Plastics) Technical Drawings & GD&T BOMs, PDM, and Revision Control