Hire the best freelance Fabrication Design expert designers for your company

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

Eight plus years of working experience in product design & development, -Wearable gadgets, security products, IoT, medical equipment, kitchen appliances & processor, electrical enclosure, electronic... Read more

Eight plus years of working experience in product design & development, -Wearable gadgets, security products, IoT, medical equipment, kitchen appliances & processor, electrical enclosure, electronic products etc. -Knowledge of new and emerging products, processes and technologies. -Hands-on experience in DFM & DFMEA for product betterment and critical risks assessment. - Adaptive to a fast-paced environment needing minimal supervision

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

highly technical professional background in mechanical drafting technologist with 8 years of experience in varied industries like Agriculture, Automobile parts, and Automotive sector with proven skill... Read more

highly technical professional background in mechanical drafting technologist with 8 years of experience in varied industries like Agriculture, Automobile parts, and Automotive sector with proven skills in drafting models in CAD formats and other tools associated; has an extensive knowledge of the principles of developing CAD/CAM designs and reference standards; excellent time management skills, Energetic, ability to work with less supervision; can work closely with engineers and other professionals.

My strength in the field of 3D design is that I can design existing products, then I measure them, or now more famously, product scanning. then I processed the product into 3D Modeling. I am also an... Read more

My strength in the field of 3D design is that I can design existing products, then I measure them, or now more famously, product scanning. then I processed the product into 3D Modeling. I am also an expert in several Dies, JIG, Fixture construction designs for automotive parts. Mastering Class Surface A, in designing Car Interiors, Homes, and Furniture Tools.

"Welcome to my profile! I am a dynamic and innovative Mechanical Design Engineer with a passion for CAD modeling and product development. With expertise in various software, including SolidWorks for C... Read more

"Welcome to my profile! I am a dynamic and innovative Mechanical Design Engineer with a passion for CAD modeling and product development. With expertise in various software, including SolidWorks for CAD, ANSYS for FEA & CFD, and Luxion KeyShot for high-quality realistic renderings, I bring creativity and precision to every project. My experience encompasses a wide range of industries, including industrial equipment design, consumer product development, and machine design. I excel in translating concepts into tangible designs, optimizing functionality, and ensuring manufacturability. As an expert in CAD modeling, I leverage cutting-edge techniques and advanced parametric design to deliver exceptional results. I am adept at creating realistic 3D renderings, conducting mechanical analysis, and producing accurate technical drawings. Collaboration and client satisfaction are at the core of my work ethic. I believe in open communication, closely understanding project requirements, and delivering high-quality solutions on time and within budget. I am committed to exceeding client expectations and ensuring a seamless design process from concept to completion. If you are seeking a skilled Mechanical Design Engineer with a focus on innovation, CAD modeling, and product development, I am here to bring your ideas to life. Let's collaborate on your next project and create outstanding designs together!" Feel free to contact me for your projects. Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am highly proficient in AutoCAD, UG-NX/CATIA/SolidWorks, and Inventor as well as other 3D modeling software packages. My knowledge of these tools enables me to create accurate designs that meet cust... Read more

I am highly proficient in AutoCAD, UG-NX/CATIA/SolidWorks, and Inventor as well as other 3D modeling software packages. My knowledge of these tools enables me to create accurate designs that meet customer requirements on time and within budget constraints.

Hey everyone! I'm a professional Mechanical Engineer specializing in mechanical and product design as well as manufacturing. My professional skills allow me to help anyone of any experience level take... Read more

Hey everyone! I'm a professional Mechanical Engineer specializing in mechanical and product design as well as manufacturing. My professional skills allow me to help anyone of any experience level take their concepts, ideas, sketches and more into reality. From initial concepts to tool quality drawings, product renderings and manufacturing consulting I am glad to help every step of the way! My experience comes from my professional career; drawing from time spent in DAuto Engineering Pvt. Ltd. at the post of the design engineer. I'd worked on several design projects in the past. I still remember my 3D surfacing work on Volvo V90 CrossCountry car, that was my best work I'd ever done. The software which I generally use for 3D modelling and surfacing is CATIA V5.

I'm a specialist and have the ability in computer-aided design engineering, I have a demonstrated history of working for the auto packaging and filling machinery for pharmaceutical, beverage, cosmetic... Read more

I'm a specialist and have the ability in computer-aided design engineering, I have a demonstrated history of working for the auto packaging and filling machinery for pharmaceutical, beverage, cosmetic and food industries. I am skilled in Autodesk Inventor, Product, Part, Machine Designine, Photorealistic 3D Modeling, Autocad Mechanical, Solid Modeling, Computer-Aided Design(CAD), Machine Operation, Machine Learning, Machine tools and Machine Control. My Strong focus has generally been on the art and design of professional mechanical engineering. I have likewise insight for redrawing existing client parts for the future, like as a reference or re-ordering parts and altering existing parts to take special care of new circumstances of machinery and apparatus. My passion is machine designing from scratch for own product range and also working with customer specifications following required design criteria. I have always designed the machinery to industry-recognized standards and principles. I have solid knowledge and strong information in parts, components and elements of machines, hydraulic and pneumatic systems, precision mechanical drives, automation of machines and processes, mechanical technical calculations, resistance of materials and CAE analysis, metallic structures, welding processes and their symbologies, pipes, standards technical and regulatory framework. Technical training to operate machine tools such as mechanical lathes, universal milling machines and CNCs, ability to perform preventive and corrective maintenance TPM, assembly and adjustment of industrial machinery and equipment, and civil plants.

A mechanical engineer with over 5 years of experience providing detailed analysis and creative insight for developing engineering projects. I am skilled in using computer-aided design software to crea... Read more

A mechanical engineer with over 5 years of experience providing detailed analysis and creative insight for developing engineering projects. I am skilled in using computer-aided design software to create 2D and 3D models. My work focuses on developing manufacturing processes by designing and modifying equipment for fabricating, machining, building, advanced assembling, maintaining, installing components, sheet metal design, nesting and drafting for laser, plasma, or oxyfuel cut, surface design, and structural design. I believe creativity and technology are formative moments of the same reality as thought and action, planning and implementation. I assure system and product quality by designing testing methods, testing finished products and system capabilities, and confirming fabrication, assembly, and installation processes. My most vital talent is my ability to come up with creative ideas and solutions to create CAD models, including part and assembly drawings, Bill of Materials (BOMs) to support manufacturing, testing, and assembly, and support components to assist with assembly. I've a good understanding of manufacturing processes including turning, milling, welding, and metal cutting. I work with clients to gather information on materials and the cost of production. This information can be incorporated into a marketing presentation for prospective investors, showing estimated costs, production time, measurements, and materials needed.

Mechanical Design Engineer (13 Years+ Ex.) |DESIGN Expertise in Product Design. Design and Development, Whatever You Think About Product I Will Create.| Imagination to Design Conversion. I have a Dyna... Read more

Mechanical Design Engineer (13 Years+ Ex.) |DESIGN Expertise in Product Design. Design and Development, Whatever You Think About Product I Will Create.| Imagination to Design Conversion. I have a Dynamic Profile with an Excellent Blend of Parts & Assembly CAD Design, Qualified BE Mechanical and Great Knowledge of the Design of Mechanical And CAD Modelling. For Designing I Use TOP RATED Software Like Solid Works, Autodesk Inventor, AutoCAD, and Creo Parametric. | Analysis and simulation of Product I use ANSYS. Extensive CAD proficiency in modeling with the part, Assembly, Sheet Metal, Weldments, Mold, Surface & Design Table, and modules using SolidWorks, AutoCAD, Inventor & Creo2.0. I have worked on 3D Printing modeling. I can create a 3D Model for 3D printing with the maintain accurate thickness. Proficient user of: - Creo Parametric - 3D modeling, assemblies, weldment, sheet metal, drafting. - SolidWorks - 3D modeling, assemblies, weldment, sheet metal, drafting, simulation, motion... - Autodesk Inventor - 3D modeling, assemblies, weldment, sheet metal, drafting. - ANSYS - FEA Analysis, Fatigue test, - Autodesk AutoCAD Development, Manufacturing & prototype Modelling, General Arrangement Layouts, P & ID, Create a new design/drawing by measuring the objective (Reverse Engineering ). Comprehensive knowledge of computer-aided engineering (CAD Design software) and GD&T. I demonstrated the ability to resolve a variety of issues and New Developments. (Such as High-Pressure triplex plunger pump, Food processing machinery, Bus Body structure and Pressure Vessels). In addition to this experience, I gained considerable Mechanical design and product development skills. I have also gain CAD Software skills (Like Solid-works, Inventor, Creo & AutoCAD) I have worked within four high-volume Mechanical companies as a Mechanical Design Engineer. I also bring to the table strong computer proficiencies in MS Word, MS Excel applications. Please see the accompanying resume for details of my experience and education. I am confident that I can offer you the new development, Modifications, CAD Software skills you are seeking.

I am a Mechanical and Manufacturing Engineer. I do analysis, calculations, designs and manufacturing prescriptions for easy and cost effective manufacturing. I provide my services on, Automation, Pr... Read more

I am a Mechanical and Manufacturing Engineer. I do analysis, calculations, designs and manufacturing prescriptions for easy and cost effective manufacturing. I provide my services on, Automation, Production, Aerospace, Robotics, Mechatronics, Electrical and Electronics, Fluid and Thermal Engineering Sectors. I prefer to work with Solidworks, Revit, Lumion, Keyshot, Ansys, AutoCAD, Sketchup, Inventor Softwares.

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the... Read more

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the opportunity to work with different companies which gave me the ability to learn about diverse products and manufacturing processes. Actually working with a small company in North San Diego as R&D lead mechanical engineer. In additionI am offering my services to people who are looking to make a modification to an existing product, to reverse engineer a component, generate file for 3D printing, generate drawing for quote or drawings for patent submission. I utilize 3D software from which I extract parametric drawings and files I can use to 3D print. Please don't hesitate to contact me for a quick preliminary pricing.

I’m Professional Product Designer, CAD Designer and Vessel Designer with 15 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 15 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

Subrat Ku Panigrahi B. Tech (Mechanical), having work experience In Design & Development of Machine parts like pulley and deflector roller, guide pulley, Actuator valve, crop shear guide roller, pisto... Read more

Subrat Ku Panigrahi B. Tech (Mechanical), having work experience In Design & Development of Machine parts like pulley and deflector roller, guide pulley, Actuator valve, crop shear guide roller, piston rod for hydraulic cylinder, heating element clamp, mixing scraper during operation and maintenance. Fabrication design of saddle for pipe, fabrication of U-seal valve, monorail, maintenance platform, staircase, industrial ramp, ladder, chute, heating hood for steel ladle. Fabrication supervision of structure, tank, platform etc. Familiar with IS, BIS, ASTM standard etc. Drafting skill in Auto CAD, Solid Works, Revit etc

I’m a Mechanical Design Engineer with over 7 years of experience in 3D modeling, HD rendering, technical drawing, product design, and CNC machining. As a Certified SolidWorks CAD Expert (CSWE), I sp... Read more

I’m a Mechanical Design Engineer with over 7 years of experience in 3D modeling, HD rendering, technical drawing, product design, and CNC machining. As a Certified SolidWorks CAD Expert (CSWE), I specialize in turning your ideas into reality through detailed CAD models and photorealistic renderings. Whether you need designs for manufacturing, concept development, 3D printing, CNC machining, or animations, I can provide models in the formats that best suit your project. I’m excited to collaborate and committed to delivering high-quality results that meet your expectations.

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating comp... Read more

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating complex hydraulic control skids for offshore use

Familiar with : -Making an Automation Machine Design & Manufacturing -Fabrication Design & Manufacturing -Engineering

Familiar with : -Making an Automation Machine Design & Manufacturing -Fabrication Design & Manufacturing -Engineering

I'm a Mechanical Design and Construction Engineer with 5 Solidworks Certificates, and I'm enthusiastic to explore my skills in Mechanical and Product Design. I've always loved to explore my knowledg... Read more

I'm a Mechanical Design and Construction Engineer with 5 Solidworks Certificates, and I'm enthusiastic to explore my skills in Mechanical and Product Design. I've always loved to explore my knowledge about everything. In my first year in college, 2018, I found a new field of Mechanical Design and Construction that synchronizes mechanical, art, and research. Even though my design hasn't been known and used by many people, my dream is to one day fill the entire world with just my own creations.

Design and Development Engineer | 2D and 3D designing software - AutoCAD, Solidworks, Creo Parametric, Autodesk Fusion 360, Google Sketch Up 7 years experience in Design & Engineering industry, Worke... Read more

Design and Development Engineer | 2D and 3D designing software - AutoCAD, Solidworks, Creo Parametric, Autodesk Fusion 360, Google Sketch Up 7 years experience in Design & Engineering industry, Worked as a design engineer in multiple design fields ranging from Design for 3D Printing, Metal Fabrication Design, Structure Design, Artworks - From Concept to Products, Museum Exhibition Design. Projects I've worked on are now successfully installed across multiple hotels and airports in UAE, Qatar Duty Free, OAAM Museum in Oman and across whole of United Kingdom.

I would like to introduce my venture STUDIO 5253-An Architectural Visualisation Company based in Sydney, Australia. We are working with Premium Builders,Developers and Project Marketing companies nati... Read more

I would like to introduce my venture STUDIO 5253-An Architectural Visualisation Company based in Sydney, Australia. We are working with Premium Builders,Developers and Project Marketing companies nationwide. STUDIO 5253 specializes in hyper-realistic 3D rendering, animation and interactive solutions for the building and design industries. We have done classy 3D rendering and Visualisation work along with BIM Modelling using Revit for AEC Industries and can send Revit samples if needed. We also have 4D animation design for Builders and Developers with time as the added dimension.It shows the progress of the Construction as a time lapse which is appreciated by the Stakeholders.We also do Real estate brochures,floor plans and CAD drawings from sketches. We provide end to end Project marketing services with Interactive walkthroughs, banners and sign boards, Real estate portals for new Developments to showcase information, Mobile Apps for Real Estate Projects. STUDIO 5253 is Australia based and has clients in Sydney, Melbourne,Brisbane and Perth and we provide high end architectural renderings,animations and related services to Architects,Builders,Developers,Urban Planners,Real Estate Professionals,Media Houses,Product Manufacturers and end users across Australia,New Zealand and Globally.

With over two decades of engineering experience, I am a seasoned CAD professional adept in leveraging the power of AutoCAD and SolidWorks to bring innovative designs to life. With a decade-long profic... Read more

With over two decades of engineering experience, I am a seasoned CAD professional adept in leveraging the power of AutoCAD and SolidWorks to bring innovative designs to life. With a decade-long proficiency in both software, I have honed my skills to expertly craft detailed and precise 3D models. My in-depth knowledge of sheet metal work allows me to create optimized designs for manufacturing, ensuring efficiency and quality in the production process. As a CAD enthusiast, I thrive in collaborative environments like CAD Crowd, where I can contribute my expertise and passion for design to tackle diverse challenges and deliver exceptional solutions.

17 years as a consultant in Design development and Production engineering on short and long-term contracts Clients include: Boeing, VW, Ford, GM, Electrolux, Bentley, Rolls Royce, BMW, ABB, Bom... Read more

17 years as a consultant in Design development and Production engineering on short and long-term contracts Clients include: Boeing, VW, Ford, GM, Electrolux, Bentley, Rolls Royce, BMW, ABB, Bombardier, Magna, Tesla and others. • 8 years direct management within Manufacturing & Engineering environments • Apprentice trained Journeyman with 11 years shop floor experience in fabrication, machining, welding large electro mechanical assemblies. • 37 years technical engineering and manufacturing experience, inventing and taking concepts into mass production • 20 years designing and manufacturing plastic injection molded components • 3 Year developing interior electro mechanical LED lighting systems for Ford, GM and Tesla with automotive approval and testing standards. • 20+ years experience 3D CAD design with Catia V5 and other CAD systems • 15 years Automotive, Aerospace and Sub sea experience • Extensive experience, inventing, designing, rapid prototyping, testing and validating mechanical and electro-mechanical assemblies from concept to production. • Leadership and mentoring teams within manufacturing and engineering departments • PFMEA, DFMEA, DFM, FEA, Lean, ECN, BOM, PLM experience • Continuous improvement advocate, VA/VE • Engineering budget oversight on programs in excess $140 million per year • Capability to manage Production, Production engineering, quality control, purchasing, planning and warehouse

I have a strong background in 3D modeling from As-Built data, isometric extraction, tie-in point reports, and UPV line volume isolation, along with preparing high-quality CAD-based deliverables. I als... Read more

I have a strong background in 3D modeling from As-Built data, isometric extraction, tie-in point reports, and UPV line volume isolation, along with preparing high-quality CAD-based deliverables. I also have experience with asset management systems and working with Smart P&IDs for integrated design workflows. Key Skills: 3D Piping Design & Modeling As-Built Drawing Interpretation Isometric & Orthographic Drawing Extraction Redlining & Revisions Tie-in Point Identification & Reporting UPV Line Volume Isolation Smart P&IDs / SmartPlant Tools Asset Information Management Equipment Layouts and Fabrication Drawings Piping Supports and MTOs Industry Codes: ASME, API, ISO CAD Tools: AutoCAD, Plant 3D, Aveva E3D, Aveva PCM, Bluebeam Revu I'm detail-oriented and committed to ensuring that every design aligns with client specifications, project schedules, and safety standards. Whether you're looking to update an existing plant model or need complete piping layouts for a new installation, I can support your project from concept to completion.

Welcome to my professional freelance services! I am dedicated to providing high-quality work tailored to your needs. With 7 years of experience in Sheet Metal, Plastic & Fabrication Design work, I am... Read more

Welcome to my professional freelance services! I am dedicated to providing high-quality work tailored to your needs. With 7 years of experience in Sheet Metal, Plastic & Fabrication Design work, I am confident in delivering results that exceed your expectations.

I am a Mechanical Design Engineer with 7+ years of experience specializing in rolling stock (railway) and agricultural machinery design. My expertise lies in CAD modeling. What I Offer: ✔ 3D CAD Mod... Read more

I am a Mechanical Design Engineer with 7+ years of experience specializing in rolling stock (railway) and agricultural machinery design. My expertise lies in CAD modeling. What I Offer: ✔ 3D CAD Modeling & Drafting ( CATIA) ✔ Sheet Metal & Fabrication Design ✔ Bolted & Welded Joint Design