Hire the best freelance Electronics Design expert designers for your company

I am a skilled Mechanical Design Engineer, with more than 25 years of experience in the field of product development. I have worked as an independent consultant for the last 19 years, and I have worke... Read more

I am a skilled Mechanical Design Engineer, with more than 25 years of experience in the field of product development. I have worked as an independent consultant for the last 19 years, and I have worked in many different industries. As a Mechanical Design Engineer at leading Technologies Inc. I am certain I would make a valuable addition to your product development needs. I have worked in the following industries; • Medical industry. Designed surgery tools for orthopedics as well as dental implants. • Firearms industry. Designed firearms accessories for individuals and manufacturers. • Consumer Electronics. Designed handheld tablets, computer chassis and enclosures. • Military Simulators. Designed IMTS missile launcher trainers. • Structural Steel products. Designed roof structures for low income houses, table tops for machinery, industrial coffee roasting plant. • Auto Performance parts. Designed parts for high performance sports cars. • Household Products. Designed kitchen and bathroom products. In addition to my experience and personal qualities, I have a solid educational foundation and a passion for engineering and mechanical designing. Please review my Linkedin profile for further details. Thank you for your time and consideration. Sincerely, Alex Atala

I'm electronic engineer specialized in high perfomance PCB design and embedded programming. I have fifteen years of experience in PCB designs for high performance boards. The last four and half yea... Read more

I'm electronic engineer specialized in high perfomance PCB design and embedded programming. I have fifteen years of experience in PCB designs for high performance boards. The last four and half years I was working in naval equipment design as echosounders and autopilots applying rigurous EMI standards. In my portfolio you can find pictures of same of my works. I know how mix digital microcontrolers, small signal conditionning and high power in same board without interfering. I use design rules recomended for manufacturers as Analog Devices, Texas Instruments, ST, etc. I have a knowlegments in net sensors area and PCB design for RF applications (2.4GHz) like Zigbee, Bluethoot and WiFi. I can work by tasks or for hour, like you prefer.

Nijiworks do not present a new product. Working with your ideas, we design and manufacture ready for sale products. Professional Designers Our team has 15 years of experience and each member is ex... Read more

Nijiworks do not present a new product. Working with your ideas, we design and manufacture ready for sale products. Professional Designers Our team has 15 years of experience and each member is expert in his field. We are ready to present you an excellent designs in accordance with your ideas. Producable Product With the colloborative working of our designers, failure to produce of your designed product will be out. One of nijiworks objectives is to make low cost and producable product. 3D design and development We work through a new product design or improvement of your existing product. Protoype manufacturing We produce your existing product design or a prototype that has been designed by nijiworks. Mold design and manufacturing We prepare your metal or plastic products' mold design and propose an offer for mold manufacturing. Contract manufacturing We can actualise contract manufacturing of no mold requiring products with minimum cost. Nothing is impossible, just imagine !

what people say about me: "Ruurd is next to a creative engineer a good communicator with new ideas and creative solutions. " I enjoy learning a lot about a topic and using it in the real world. In th... Read more

what people say about me: "Ruurd is next to a creative engineer a good communicator with new ideas and creative solutions. " I enjoy learning a lot about a topic and using it in the real world. In the last years I'm focused on sustable engineering. Wind turbines, solar propulsion and energy storage are my mean interests. Data collection and analysing is due to my practical know how a specialization.

I’m a product/industrial designer and engineer with a BA in Industrial Design (Universidad Autonoma Metropolitana, Mexico) and an MSc in Integrated Product Design (Delft University of Technology, The... Read more

I’m a product/industrial designer and engineer with a BA in Industrial Design (Universidad Autonoma Metropolitana, Mexico) and an MSc in Integrated Product Design (Delft University of Technology, The Netherlands). I have experience working in 4 different countries (UK, The Netherlands, India & Mexico). I like to work in projects that are exciting, challenging and meaningful. I don’t want to stagnate working in the same thing over and over. I like to be dynamic, always changing, staying out of my comfort zone. I learn fast and well, I’m adventurous, entrepreneurial, and trust my guts, I like to do, build, repair, tweak, mod, carve, mill, cut, sand, and of course create. I like technology, electronics, and software. I love sports, especially football. I love arts, especially music & films. I play & build electric guitars, and I love everything that has to do with it (amps, effects, accessories, etc.). I’m sociable, relaxed and playful, but serious and committed. I like long lasting relations with people. I am lucky to have a large and supportive network of people, many friends, and many best friends. I try to constantly increase my social circle. Contact me if you have a nice project, a challenging job, if you want some designer feedback, or simply to talk about design, technology, music, art, or anything you can think of.

AUTODESK Certified, my passion and job are 3D design and electronics since 1987. Mechatronician, I invent and develop prototypes in various skills domains such as : mechanical, industrial and electron... Read more

AUTODESK Certified, my passion and job are 3D design and electronics since 1987. Mechatronician, I invent and develop prototypes in various skills domains such as : mechanical, industrial and electronics. I always create thinking about design and manufacturing cost, structural and physical constraints. I'm fast and efficient to always find the better solution. Others related hobbies are physics and mathematics which important in this business...  

10+ years 2D-3D Mechanical Design and Rendering, Multiphysics Simulations, Programming Language, Electronic PCB Layout, Acoustic solutions.

10+ years 2D-3D Mechanical Design and Rendering, Multiphysics Simulations, Programming Language, Electronic PCB Layout, Acoustic solutions.

I am an electronic engineer with a first class degree from the University of Southampton. I have worked on a range of projects from Unmanned Aerial Vehicles to electronic medical analysis devices. I... Read more

I am an electronic engineer with a first class degree from the University of Southampton. I have worked on a range of projects from Unmanned Aerial Vehicles to electronic medical analysis devices. I can assist with both hardware and embedded software design with a strong knowledge in embedded C and C++, this includes schematic design and layout design for PCBs, component choice and costings.

-----: About Us – NextGen IoT Lab:----- We are a multidisciplinary engineering and technology development team with a strong foundation in mechanical design, industrial CAD modeling, and IoT soluti... Read more

-----: About Us – NextGen IoT Lab:----- We are a multidisciplinary engineering and technology development team with a strong foundation in mechanical design, industrial CAD modeling, and IoT solutions. With nearly a decade of hands-on experience in mechanical and industrial design, combined with over 12 years of expertise in IoT and software development, we bring together a rare blend of skills that enable us to deliver end-to-end product design and development solutions. Mechanical Design Expertise: Our team has extensive experience in 3D modeling and industrial CAD design, leveraging advanced tools such as AutoCAD, Fusion 360, SolidWorks, and other CAD software. From concept to production, we create high-precision, manufacturing-ready designs tailored to client specifications. Our in-depth understanding of manufacturing design principles ensures that each model is both functional and optimized for real-world applications. IoT and Electronics Development: Over the years, we have successfully executed more than 250 projects, ranging from basic PCB designs to complex IoT and embedded systems. We specialize in: Electronics & PCB Design: Circuit design, PCB development, amplifiers, filters, analog/digital electronics. Embedded Systems & Firmware: Microcontroller-based solutions, Arduino, ESP32, LoRaWAN devices, and custom firmware development. Connectivity & Protocols: Wi-Fi, Bluetooth, BLE, RF, High-Speed RF (2.4 GHz), LoRa, LoRaWAN, TTN, Chirpstack, Node-RED, MQTT, HTTP, and webserver integration. Software Development Capabilities: Our proficiency extends beyond hardware into software engineering, enabling us to design and develop scalable applications, control systems, and dashboards. We are skilled in a wide range of programming languages and frameworks, including Python, C++, React, Node.js, Angular, and PHP. This versatility allows us to provide integrated hardware-software ecosystems for industries such as manufacturing, automation, energy, smart devices, and more. Our Commitment: As a TOP-RATED team with all 5-star reviews, we pride ourselves on delivering high-quality, reliable, and innovative solutions. By uniting mechanical engineering, electronics design, and software development, we provide our clients with a one-stop solution for product development—from initial concept and prototyping to final deployment. Our mission is to help businesses and innovators bring their ideas to life with precision, creativity, and technical excellence.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I am a former Research and Development Engineer now currently doing consultancy at the same time specializing in Product Design and Robotics Engineering. Designing products from mechanical, Electronic... Read more

I am a former Research and Development Engineer now currently doing consultancy at the same time specializing in Product Design and Robotics Engineering. Designing products from mechanical, Electronics design, Programming until Graphic User Interface. I also do product animations as well. Aside from indicated projects on my portfolio, there are other projects that I made, but due to confidentiality reasons, I apologize for I could not show them in public.

BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality:... Read more

BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality: BMEC has a no-compromise approach to quality and safety. Ethical, elegant engineering is the cornerstone of our business. BMEC's multidisciplinary team specialises in using the latest technologies and manufacturing methods to provide insightful solutions quickly and affordably Time: Our dedicated team coupled with our partner-network of suppliers means we can guarantee the shortest development time. Cost: Our professional design and manufacturing services are highly competitive. Scope: Our experienced team is here to help you find balanced solutions that fit your budget and your timeline.

I am an experienced Electrical & Electronics Engineer with over 20 years of expertise in industrial communication systems, electronics design, and mechanical product development. My unique strength li... Read more

I am an experienced Electrical & Electronics Engineer with over 20 years of expertise in industrial communication systems, electronics design, and mechanical product development. My unique strength lies in combining electronics engineering with mechanical design using SolidWorks, enabling me to deliver complete solutions from concept to production. I have successfully managed and executed projects in maritime communications, petrochemical plants, port security systems, and audio equipment design. My background as both an engineer and a CEO gives me strong project management skills and the ability to deliver high-quality results on time.

My name is Jón Schone and I am passionate about engineering. I attended Precision engineering school when I was 15 and graduated at my 19th. This was quite young so I decided to continue studying for... Read more

My name is Jón Schone and I am passionate about engineering. I attended Precision engineering school when I was 15 and graduated at my 19th. This was quite young so I decided to continue studying for the bachelor of Mechanical engineering. After two years I started working at an electronics manufacturer and this went so well that I started the bachelor of Electronics alongside my daily work. I found out that I liked development a lot and started creating automated test systems with Agilent VEE and NI LabVIEW. I am thrilled about the combination of software, electronical hardware and mechanical hardware. The possibilities are endless, especially today with rapid prototyping and the cheaper becoming hardware. I got this insight when I worked at Philips as a Test engineer at the Shaving development branch where I created several challenging test- and measurement systems at different places within the Drachten site. I came in touch with 3D printing and developed tooling for test systems. I am in close contact with manufacturing suppliers, people on the work floor, SMT operators, electronics designers, test engineers and software engineers. The diversity of work activities I have done over the past years gives me a keen understanding of the manufacturing process.

As a highly driven electronics design engineer, I bring a sophisticated approach to the full spectrum of product development—from initial circuit modeling and simulation through to professional-grade... Read more

As a highly driven electronics design engineer, I bring a sophisticated approach to the full spectrum of product development—from initial circuit modeling and simulation through to professional-grade PCB layout. With a strong command of KiCad’s advanced feature set and a sharp focus on functional precision and manufacturability, I deliver polished solutions that stand out.

Products and Electronics Designer with experience in the digital fabrication and general prototyping fields. Organized, highly-skilled, and respects given time frames. I work with various Product de... Read more

Products and Electronics Designer with experience in the digital fabrication and general prototyping fields. Organized, highly-skilled, and respects given time frames. I work with various Product design software as Fusion360, Solidworks, and Inventor. For electronics, I use Autodesk's Eagle. Through my background in digital fabrication I worked with various manufacturing techniques such as laser cutting, CNC machining, PCB milling, a d 3D printing. The knowledge I gained in manufacturing helps me to ensure that all my designs are easily manufacturable and cost effective. In this age of fast changing economies you need an open-minded and flexible professional to help you work in an agile manner with your projects.

Credence Tek is a group of dedicated engineers in the areas of electronic systems, board design, pcb layout design, software and web design. We have a collective experience of 20+ yrs in the electroni... Read more

Credence Tek is a group of dedicated engineers in the areas of electronic systems, board design, pcb layout design, software and web design. We have a collective experience of 20+ yrs in the electronic and software industries. Our areas of proficienty include: Electronics, Circuit design, PCB design, Software development, Website development. We would be glad to be your design partner and provide our services to the best of our capabilities. Skills: Hardware: Component engineering, Schematic design, PCB layout, BoM, Gerber, documentation.

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

Mechatronics engineer currently working at Elmex Electric Pvt. Ltd. as an SPM (Special Purpose Machine) designer. Skilled in CAD design, automation, and custom machine development, with hands-on exper... Read more

Mechatronics engineer currently working at Elmex Electric Pvt. Ltd. as an SPM (Special Purpose Machine) designer. Skilled in CAD design, automation, and custom machine development, with hands-on experience in creating efficient, reliable, and innovative mechanical solutions."

Being Electromechanical Engineer, I have been working for 4 years as Research & Development Engineer in the Medical Devices industries. This function includes hardware and software engineering (electr... Read more

Being Electromechanical Engineer, I have been working for 4 years as Research & Development Engineer in the Medical Devices industries. This function includes hardware and software engineering (electronic circuits design, microcontrollers programming), mechanical systems design, verification & validation. While still working as employee in the medical field, I offer Engineering services as Freelance since July 2019 with the purpose to challenge myself with new projects.

I am a skilled PCB Design & Layout Engineer with experience in creating high-quality circuit designs using Altium Designer, Eagle, KiCad, and EasyEDA. I specialize in schematic capture, PCB layout, Ge... Read more

I am a skilled PCB Design & Layout Engineer with experience in creating high-quality circuit designs using Altium Designer, Eagle, KiCad, and EasyEDA. I specialize in schematic capture, PCB layout, Gerber file generation, BOM preparation, and 3D modeling for both simple and complex electronic projects.

I offer a complete PCB design service, managed by a team of experienced engineers. I take care of all the critical stages to ensure that your design is not only functional, but also optimized for prod... Read more

I offer a complete PCB design service, managed by a team of experienced engineers. I take care of all the critical stages to ensure that your design is not only functional, but also optimized for production and for the best electrical performance. I transform your Electrical Diagram into a production - ready PCB with guaranteed quality and cost optimization. Complex layouts (High-Speed, RF, Multi-Layer) Thanks to a well-established project management process, I act as your single point of contact. I manage the entire workflow, from receiving your design to delivering the complete Gerber files, centroids, and BOM. Dedicated Project Management: I act as your single point of contact. I take care of detailed requirements gathering, technical specification translation, and workflow management, saving you time and ensuring clear communication. Design for Manufacturing (DFM) Optimization: Each layout is rigorously checked to ensure it meets manufacturing standards. This means fewer errors, lower costs, and faster delivery times from your manufacturing company. Quality Engineering and Analysis: I perform Design Rule Checks (DRC) and 3D checks for clearance, preventing costly assembly errors and mechanical issues in advance. Professional Standard Delivery: I will provide you with a complete, universal production package that is accepted by all PCB factories worldwide.

Electrical engineer with skills pcb design,electronics design and circuit design

Electrical engineer with skills pcb design,electronics design and circuit design

Hi ! I'm an Electronics Design Engineer holding a Master's degree in Electrical Engineering with +2 years of experience. I had some experience in designing PCBs and RF/microwave and millimeter-wave c... Read more

Hi ! I'm an Electronics Design Engineer holding a Master's degree in Electrical Engineering with +2 years of experience. I had some experience in designing PCBs and RF/microwave and millimeter-wave components (filters, antennas, diplexers...). Most of my experience comes using the following software: Kicad, EasyEDA, Altium, ADS, CST, and HFSS. --------- Recently, I have worked on the design of an RF transmitter (PCB board) for RFID reader; The broad consist of: Antenna; Bandpass Filter; Power Amplifier; Oscillator... I also participated in working on a development of new charger. I have experience in using measurement tools for RF components such as VNA and oscilloscope. I have published three book chapters and two articles in international journals. - Programming: C++, VHDL, Java, MATLAB, Familiar with Python.

Studied Mathematics and Electrical Engineering,Teaching Electronics Design Automation and Project Management at a local training institute, Developing renewable energy systems based on wind energy. Ca... Read more

Studied Mathematics and Electrical Engineering,Teaching Electronics Design Automation and Project Management at a local training institute, Developing renewable energy systems based on wind energy. Can do Architectural Visualization as well.

• Electronics Design Engineer, Product Designer and Developer • Circuit Design, digital, analogue circuit simulation using LTSpice • PCB Design – Altium Designer (10 years), Flexy/Rigid, differential... Read more

• Electronics Design Engineer, Product Designer and Developer • Circuit Design, digital, analogue circuit simulation using LTSpice • PCB Design – Altium Designer (10 years), Flexy/Rigid, differential pairs etc • Experienced Prompt Engineer using ChatGPT • Creation of Python based test software, using SciPy, NumPy, PyVISA and Matplotlib libraries to control test equipment in the performance of long-term stability testing of system equipment and electronic modules within a quantum computer and creation of various plots of the recorded data for analysis and characterisation of system components and their performance over time • Switch Mode Power Supplies and control circuitry for multiple systems for EPOS systems, LED automotive lighting products and intelligent street lighting systems • Involvement in the development of Consumer Electronics products • Design and analysis of a specialist ultra-stable resonant RF circuit using Waveform Generators, RF amplifiers, Signal Analysers, VNA’s, RF circuit simulation and other test equipment • Used VNA’s to analyse the open circuit characteristics a circuit, made up from a combination of external components and ASIC internal parts, prior to active connection and test of the inductive elements of the circuit • Embedded Controller design and of test firmware for Intel, Microchip, Atmel, NXP and ARM • Design of IOT and Smart Lighting Products • Programmable Logic, PAL’s, CPLD’s and Renesas/Dialogue GreenPAK • Experience of programming in Python, C, C++, VBA, Assembler and other languages • 3D CAD – OnShape – CADKEY – DesignSpark Mechanical • Prototyping, SMD manual assembly and soldering • Development work on WPT and Battery Charging Systems • Innovation and concept development using Particle Photon-2 and Arduino etc. • Experience in cost-down exercises for volume manufacture on a number of different products • Evaluation of the various effects of component change, removal and total circuit re-imagining and re-design • Management experience at all levels from team leader to Director