Hire the best freelance CAD Technical Drawing expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I’m a Mechanical Design Engineer with over 7 years of experience in 3D modeling, HD rendering, technical drawing, product design, and CNC machining. As a Certified SolidWorks CAD Expert (CSWE), I sp... Read more

I’m a Mechanical Design Engineer with over 7 years of experience in 3D modeling, HD rendering, technical drawing, product design, and CNC machining. As a Certified SolidWorks CAD Expert (CSWE), I specialize in turning your ideas into reality through detailed CAD models and photorealistic renderings. Whether you need designs for manufacturing, concept development, 3D printing, CNC machining, or animations, I can provide models in the formats that best suit your project. I’m excited to collaborate and committed to delivering high-quality results that meet your expectations.

TRANSFORMATION OF IDEAS INTO WORKING DRAWING & CONCEPTS. - That's what I do A passionate SOLIDWORKS professional with more than 3 years of experience in Engineering design and drafting field. I am... Read more

TRANSFORMATION OF IDEAS INTO WORKING DRAWING & CONCEPTS. - That's what I do A passionate SOLIDWORKS professional with more than 3 years of experience in Engineering design and drafting field. I am currently working as Manufacturing Engineer in leading Manufacturing Company in Ontario, Canada. Aviation Engineering (Mechanical) and Automated Manufacturing under my academics qualification, provides me with skills and knowledge of Designing & Manufacturing field. My capabilities include working from simple object designing to Factory layout in CAD. If you need help with Jig & Fixture design, Prototyping, Mechanical design & drafting and workplace design, HIRE ME. I would love to have a coffee with you and discuss innovative solutions for your project.

I am An Aeronautical Engineer and a Professional in Product Design and Analysis with Aerospace Industry Experience now looking for a full time freelancing

I am An Aeronautical Engineer and a Professional in Product Design and Analysis with Aerospace Industry Experience now looking for a full time freelancing

I am a trained Architectural Designer with over 6 years of experience specializing in architectural drafting, 3D modeling, and construction documentation. I create accurate architectural drawings and... Read more

I am a trained Architectural Designer with over 6 years of experience specializing in architectural drafting, 3D modeling, and construction documentation. I create accurate architectural drawings and visualizations using ArchiCAD, AutoCAD, and Lumion, and support conceptual design with SketchUp. I’ve successfully collaborated on residential and commercial projects, producing detailed technical documentation, permit-ready drawings, and photorealistic renders. My work ensures alignment with local building codes and project requirements, and I consistently adapt designs based on client feedback and evolving site conditions.

I specialize in SolidWorks 3D design, sheet metal, and metal structures. I provide production-ready models, DXF/DWG drawings, welded assemblies, and 3D printing files. All designs are precise, paramet... Read more

I specialize in SolidWorks 3D design, sheet metal, and metal structures. I provide production-ready models, DXF/DWG drawings, welded assemblies, and 3D printing files. All designs are precise, parametric, and ready for fabrication. My expertise covers: ✅ Sheet metal parts & assemblies – complete with flat patterns and DXF files for laser cutting. ✅ Metal structures & welded frames – designed for fabrication and assembly efficiency. ✅ Parametric models – fully editable designs with dynamic dimensions and equations. ✅ 3D printing models (STL, STEP) – optimized for prototypes or functional parts. ✅ Production drawings (DWG, PDF) – ready for workshop or supplier use. ✅ Mechanical conversions – from sketches or existing drawings to precise 3D models. I work with precision, keeping manufacturability and cost optimization in mind. Whether you need a new design, a parametric model, or ready-to-produce fabrication drawings, I’ll deliver accurate, clean, and industry-standard results. Software: SOLIDWORKS (3D/2D Design, Sheet Metal, Weldments) AutoCAD (Technical Drawings, DWG/DXF Editing) Deliverables include: 📁 3D Models – SLDPRT, SLDASM, STEP, STL 📄 Drawings – DWG, DXF, PDF (ready for production) 📋 BOMs & fabrication-ready documentation 🎯 I deliver not just models – solutions ready for real-world manufacturing. Worked with METALINOX, GORTANI, OFFMA (Italy). Let’s bring your idea to life — from concept to fully manufacturable 3D design. 🧲 SEO Keywords embedded: SolidWorks design, mechanical design engineer, sheet metal parts, welded structures, metal fabrication, parametric modeling, laser cutting files, DXF, 3D printing model, fabrication drawings, production-ready, AutoCAD, industrial structures, staircase design.

Thanos Ziozias, industrial designer, studied at the School of Mechanical and Aeronautical Engineering, University of Patras with specialization in manufacturing department and industrial design. In 2... Read more

Thanos Ziozias, industrial designer, studied at the School of Mechanical and Aeronautical Engineering, University of Patras with specialization in manufacturing department and industrial design. In 2006 he has founded "ΜΑΖΙ Product + Customized Design" in Athens-Greece where he provides industrial and technical design services in Greece and abroad. Ultimate aim is to offer you everything you will need for an innovative, successful and market compatible product development the soonest possible. He undertake the full design of new products or customized constructions, regardless its complexity and difficulty, with primary aspiration to achieve the perfect combination of ergonomy, usability, aesthetic and viability of the product. Complete technical and consulting services in every stage of the product development, from the creative idea, to the product design till the process of the manufacturing in scale and the packaging. In parallel with the ongoing process of the 3D – 2D design and the creation of the 3D printed prototype, along with partners, can design the product’s brand in accordance with all of its requirements. During the last few years, he has built strong long lasting collaborations with leading companies in plastic and consumer goods industry, advertising agencies, architects, construction and ship repair companies. He is also one of the top advanced certified 3d surface designers in Greece.

I am Mechanical Engineer and professional in Auto cad, Pro-E, Creo, Nx-Cad, Ansys wb, solidworks. I am experienced in product design, assembly, drafting, sheet metal. and i am graduated in mechanical... Read more

I am Mechanical Engineer and professional in Auto cad, Pro-E, Creo, Nx-Cad, Ansys wb, solidworks. I am experienced in product design, assembly, drafting, sheet metal. and i am graduated in mechanical engineering with aggregation of 80%, so i can solve any technical problem analysing it in a correct manner. i am a good analyzer. Now i am working as a Technical director for a company. Thank you

I am a practicing Design Engineer and Mechanical Engineer with a Bachelor's in Mechanical Engineering and over 5 years of combined experience in Product Design, Industrial Design, Production and Maint... Read more

I am a practicing Design Engineer and Mechanical Engineer with a Bachelor's in Mechanical Engineering and over 5 years of combined experience in Product Design, Industrial Design, Production and Maintenance. I am passionate about design and enjoy developing innovative products that leave a lasting impression. I seek projects that are ambitious, cutting-edge, and provide opportunities for me to apply my creativity. Let's collaborate to bring your technical ideas to life! I specialize in: ✅ 3D Part Design ✅ 3D Assembly ✅ 3D Product or Part Rendering (Photo Realistic) ✅ 2D Engineering Drawings ✅ BOM (Bill of Materials) ✅ Sheet Metal (3D Model and DXF Files with bends and cut lines) ✅ 3D Simulation and Analysis (Stress/Strain, Fluid Flow, Volumetric Analysis, Fatigue Analysis, Center of Gravity, etc.) My expertise lies in delivering high-quality engineering solutions for complex mechanical systems. I am proficient in part and assembly modeling, sheet metal design, surface modeling, simulation, and photo-realistic rendering. I have several years of experience with: ✅ Fusion 360 ✅ SolidWorks ✅ KeyShot 💥Additionally, I possess strong skills in panel wiring, PLC programming, and working with motors, actuators, sensors, and switches. I work well with clients who prioritize communication and value transparency, while setting realistic project expectations. If this aligns with your vision, please reach out. I would love to discuss how I can help bring your ideas to life!

more than seven years experience in SolidWorks,glass products ,3D modeling and assembling design; Sheet metal parts design. modeling , Mechanisms is my passion!

more than seven years experience in SolidWorks,glass products ,3D modeling and assembling design; Sheet metal parts design. modeling , Mechanisms is my passion!

Professional Mechanical Engineer Designer and my specialty is CATIA, AutoCAD and SOLIDWORKS. With 12 Years of work for the Automotive industry, I also have plenty experience in Machining, Fabrication... Read more

Professional Mechanical Engineer Designer and my specialty is CATIA, AutoCAD and SOLIDWORKS. With 12 Years of work for the Automotive industry, I also have plenty experience in Machining, Fabrication of sheet metal items and structural steel items, Fabrication of welding components, Engineering Drawing, clamps and jigs design, Polymer items design and Carpentry. The services I offer: ⭐ ✅Modeling Structural Steel items (weldment) in SolidWorks and CATIA using std. and customized profiles ✅Sheet Metal 3D, 2D, dxf ✅Fabrication Drawings with BOM, Solid Models, Sheet Metal items etc. ✅3D modeling, 2D Drawing based on your sketches, pictures etc. using SolidWorks, CATIA and Autodesk Inventor ✅Raster to Vector conversion, dxf from sketch/photo/hand made drawings for laser cutting. ✅2D drafting / drawing using AutoCAD ✅Technical Drawing of furniture, wooden items etc.

J. PABLO RIESTRA S. Plaza Primo de Rivera 8; Oviedo, Asturias, Spain Ph.: (▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ --- e-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ More information @ http://www.pabloriestra.com ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒... Read more

J. PABLO RIESTRA S. Plaza Primo de Rivera 8; Oviedo, Asturias, Spain Ph.: (▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ --- e-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ More information @ http://www.pabloriestra.com ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ EDUCATION Cum Laude Bachelor’s Degree in Architecture University of Miami (5yr. Program) (Miami, Fl., USA; 1998 - 2001) Course on Windows Graphic Design Technician. (Oviedo, Asturias, Spain; 1996-1997) Course on International Export Market Specialist. (Oviedo, Asturias, Spain; 1995) Honors Associate in Arts Degree (Architecture) Miami Dade Community College - South Campus. (Miami, Fl., USA; 1985-1989) Escuela Técnica Superior de Arquitectura de la Universidad Politécnica de Valencia. (Valencia, Spain; 1981-1983) Colegio Hermanos Maristas de Oviedo. (Oviedo, Asturias, Spain; 1968-1981) PROFESSIONAL EXPERIENCE ARTGRADEL (**) www.ArtGraDel.com Architecture & Art Director. 3D modeling and renderings for projects like Cristal Building (Gijón, Spain), Zernichi Church (Poland), Avenida del Mar Building (Oviedo), Sudecka Building (Poland), Terrazas de Fozaneldi II Building (Oviedo), etc (Oviedo, Spain; oct. 2015 – present) CARTAYA & ASSOCIATES ARCHITECTS www.cartayaandassociates.com Project Manager of the Pembroke Pines Civic Center & City Hall. Worked in other projects like The Fort Lauderdale International Airport Terminal Competition. (Fort Laudedale, Florida; march 2014 – oct. 2015) MICHAEL GRAVES & ASSOCIATES, INC. www.michaelgraves.com Associate Architect. Worked in projects like The Detroit Institute of Arts, The Arts Council of Princeton., The Nashville Federal Courthouse, Hyatt Resort in Brasilito (Costa Rica), Resorts World Sentosa (Singapur), ITC Pattigada (India), Mainstreet Rehabilitation Centers (Indiana, USA), etc. See attached letter of recommendation (Princeton, NJ; july 2001 – jan. 2013) RIESTRA – TAD (Taller de Arte y Diseño) www.riestra-tad.com www.pabloriestra.com Drawing Teacher for the Princeton Adult School, West Windsor-Plainsboro Adult Programs, & the Plainsboro Public Library. Photography & Art Teacher/Organizer for “Princeton Area Studio & Plein Air Artists” MeetUp Group. Professional Photography. (Princeton, NJ; july 2001 – present) PABLO RIESTRA www.tadcsa.com Self-employed for the elaboration of working drawings for firms such as Arvelo & Associates, Inc., J. Bonfill Architects, Inc., David J. Cabarrocas, Trelles Architects, Inc. and John Weller Architect. (*) (Miami, Fl.; march 1998 – july 2001) METALURGICA DEL NALON, S.A. Contracted for technical support, and for the study, search and opening of international sand-cast steel markets in Asia. (*) (Asturias,Spain; aug.1993 - jan.1998) JUEGOS EDUCATIVOS DIDACTO ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Own company for the design, development, assembly and distribution of the children's boardgame "El Peregrino". (*) (Asturias, Spain; jan.1993 - apr.1994) **ARTGRADEL - Artes Gráficas y Delineación www.artgradel.com Own company for graphic works. (*) (Asturias, Spain; mar.1992- present) OTHER SKILLS Microsoft Windows, MS Word/Excel/Access, Corel Draw!/Photo Paint, Adobe Photoshop/Illustrator/ InDesign/After Effects…, AutoCAD, Director 7,...; professional photography; fluent English, Spanish and fair French. AWARDS Florida Bronze Medal Award (FAIA-Florida Chapter of the American Institute of Architects-2001). Bill Gates Millenium Scholarship (2000-2001). Induction to Tau Sigma Delta Honor Society (2000). Provost’s Honor Roll in Spring1999&2000 & Fall 2000. President’s Honor Roll & Provost’s Honor Roll in Fall 1998&1999. Henry King Stanford Scholarship (1998-2001).

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like st... Read more

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like stress, fatigue, dynamic analysis. Also, I can do more simple jobs like 3D modeling, drawings. I participated in the design and fabrication of a Formula Student car. Also, I competed in the Formula Student competition. I have experience in 3D modelling, product design, fabrication and product development. I can do reports, calculations, FEA, dynamic simulations, presentations. I have experience working in an engineering company. I design products that satisfy the client's needs.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

Hello, I'm Ezequil Cuyag, a Draftsman/CAD Designer/Technical Drafter. Holding a Bachelor's degree in Drafting Technology, I bring a comprehensive background spanning the architectural, cabinet manufac... Read more

Hello, I'm Ezequil Cuyag, a Draftsman/CAD Designer/Technical Drafter. Holding a Bachelor's degree in Drafting Technology, I bring a comprehensive background spanning the architectural, cabinet manufacturing, and construction industries. With nearly 9 years of experience, I specialize in AutoCAD software for both 2D drafting and 3D modeling, complemented by proficiency in SketchUp with Vray rendering, Bluebeam, and CAD detailing. During my tenure as a CAD Operator at Creation Tomorrow Phils., I actively contributed to international projects for retail stores and architectural designs. My expertise lies in delivering precise submittal shop drawings, maintaining unwavering adherence to design standards and codes, and consistently earning recognition for dedication and quality work. These experiences uniquely qualify me for the role you are offering. With a keen eye for detail and a commitment to excellence, I am eager to leverage my expertise to elevate and enhance your team's architectural and cabinetry endeavors. Thank you for considering my application.

I am a Mechanical Engineer with 10+ years of experience in 3D modeling using Solidworks. I possess strong technical skills in designing and producing various mechanical systems and have a keen eye for... Read more

I am a Mechanical Engineer with 10+ years of experience in 3D modeling using Solidworks. I possess strong technical skills in designing and producing various mechanical systems and have a keen eye for detail. My proficiency in using 3D modeling software and tools enables me to create high-quality and realistic renderings of products and components. With my analytical and problem-solving skills, I am able to identify and troubleshoot issues in the design and manufacturing process to ensure optimal functionality and efficiency.

I'm a guy, at 30 years old, short hair, green eyes, 5'9" height, athletic body.

I'm a guy, at 30 years old, short hair, green eyes, 5'9" height, athletic body.

Are you looking for someone to conceptualize your idea? Or perhaps you need technical drawings to get your product ready for production. I can help you out whether you are at the sketching stage of yo... Read more

Are you looking for someone to conceptualize your idea? Or perhaps you need technical drawings to get your product ready for production. I can help you out whether you are at the sketching stage of your project, or if you need someone to make professional product renders. • 3D CAD Modelling • Product Rendering • Technical Drawings / Engineering Drawing • FEA Simulations • Advanced Sculpting • Product Design Solutions • Autodesk Fusion 360 • Autodesk Inventor 2019 I can create professional parts and assemblies, in advanced CAD-Software packages. Whether it’s a loopy twisted part that’s almost alien or a technical machine with many moving axis and spindles, I’ll be able to model it for you. When 3D modeling, I’m determined to reach the desired result with the highest achievable quality. This does not only mean the quality of the model but also, the way and order in which it was modeled. Therefore, I make heavy use of parametric modeling, so that a change in dimension will change the model dynamically. I work in my own ways and learn fast from my mistakes, which is why I design very efficiently when going through different product solutions. I can imagine nonexistent products in my head very detailed to quickly evaluate a concept, before even drawing the design on paper. This is a gift! This is also why my work speaks for itself, as every component and sub-assembly in the product serves a function. I’m a big fan of simplicity, especially when it comes to product design. A simpler part or assembly will have less design features and therefore be easier to maintain, understand and increase cost-effectiveness. Simplicity can however be hard to invent when the solution intuitively requires something complex to be solved. Therefore I often ignore traditional ways of solving a specific problem and rethink all possible solutions, in an attempt to fully maximize product simplicity. As I like to design, I naturally love to build my inventions and see them come alive. This I why I own a metal workshop with all the machinery needed to build what I want! This is where I spent my time when I’m not creating product designs on the computer. The workshop also allows me to better understand what part features are easy to produce, which would relate to being efficient in the production world. Some products or parts have special requirements, in the same way, the screws to shelf must be able to hold a specific number of kilos. I therefore also offer to find one of the best solutions for your specific requirements, by design iteration through simulation (FEA | FEM) of different designs. Portfolio: williamliisberg.pb.design Feel free to contact me, I would love to help you!

I am a interior designer and architectural technician with 12 years industry experience and have worked on a wide range of projects across the globe. Countries I worked in include UK, USA, Canada, Cy... Read more

I am a interior designer and architectural technician with 12 years industry experience and have worked on a wide range of projects across the globe. Countries I worked in include UK, USA, Canada, Cyprus, South Africa, Nigeria, Namibia, Mauritius and Maldives. My project experience includes hospitality, retail, residential and corporate design with my strengths lying in concept and technical design. I am passionate about my work and my clients, I want to see them happy in a new space or a new venture succeed. Through my work I aim to not only complete a design but to create a space or item that encompasses all the client initially envisaged...

High motivated Mechanical Engineer with solid track record of successful delivery of engineering solutions.

High motivated Mechanical Engineer with solid track record of successful delivery of engineering solutions.

I am A BSc. in Mechanical Engineering. Currently I am working in industry for a big manufacturer in Germany. I have knowledge about production methods, materials and CAD. I'm offering services such... Read more

I am A BSc. in Mechanical Engineering. Currently I am working in industry for a big manufacturer in Germany. I have knowledge about production methods, materials and CAD. I'm offering services such as: -Computer aided design -Finite Element Method Analysis -Rendering -Computer Aided Manufacturing -Machine and Product Design -Convertion .stl files to .step -Creating STLand STEP files for 3D Printing. Software that I use: -Inventor by Autodesk -Creo Parametrics by PTC -SketchUp -Maple for structure rigidity calculation

B.S. in mechanical engineering with aerospace emphasis. Passion for hunting, shooting, outdoors and ballistics

B.S. in mechanical engineering with aerospace emphasis. Passion for hunting, shooting, outdoors and ballistics

Hi! I'm Selin — a mechatronics engineering student who blends creativity with precision. Whether I'm prototyping in Fusion 360 and Inventor or sketching in AutoCAD, I bring thoughtful engineering and... Read more

Hi! I'm Selin — a mechatronics engineering student who blends creativity with precision. Whether I'm prototyping in Fusion 360 and Inventor or sketching in AutoCAD, I bring thoughtful engineering and visual clarity to every project. I recently started the Foundations of UX Design course by Google, and I’m already applying user-focused thinking to everything I create. I care deeply about how people experience your product — and I’ll do everything I can to design solutions that work and feel great. I specialize in: CAD Modeling (Inventor, Fusion 360, AutoCAD) 🛠️ Technical Drawing & 3D Prototyping ⚙️ UX Research & Wireframing (in progress) Problem-solving like it’s a milestone I have to conquer ✅ Let’s build something functional, delightful, and smart — together. 🚀

I am a 4th-semester Mechanical Engineering student with strong skills in advanced CAD design, particularly using SolidWorks. I’ve completed a university-level Advanced CAD course and have hands-on exp... Read more

I am a 4th-semester Mechanical Engineering student with strong skills in advanced CAD design, particularly using SolidWorks. I’ve completed a university-level Advanced CAD course and have hands-on experience designing mechanical parts and off-road vehicles such as buggies. My work includes parts like pistons and complete assemblies, all showcased on my GrabCAD profile. English is my second language (B2 certified), and I’m confident in reading, writing, and communicating technical concepts clearly. I’m always looking to grow as a designer by contributing to real-world engineering projects.

Welcome to Snap3DWorks, I'm David, your trusted partner in 3D design, technical modeling, and architectural visualization. With a deep passion for precision and aesthetics, I specialize in transformin... Read more

Welcome to Snap3DWorks, I'm David, your trusted partner in 3D design, technical modeling, and architectural visualization. With a deep passion for precision and aesthetics, I specialize in transforming concepts into high-quality 3D models, technical plans, and photorealistic renderings. Whether you're an architect, interior designer, builder, or furniture craftsman, I help bring your ideas to life with stunning accuracy and efficiency. 🔹 What I Do At Snap3DWorks, I offer a wide range of 3D/2D services, catering to construction, interior design, woodworking, metalwork, and event design. My expertise includes: ✔ 3D Modeling & Rendering – Detailed, high-quality models for architecture, interiors, furniture, and product design. ✔ Technical Plans & Drafting – Precise execution plans, sections, elevations, and manufacturing drawings. ✔ Interior Design & Visualization – Immersive 3D visualizations to optimize space and material selection. ✔ Optimized Cutting Plans – Maximized efficiency for woodworking, cabinetry, and metal fabrication. ✔ Event & Scenography Modeling – 3D designs for exhibitions, stage sets, and immersive installations. 🔹 Industries I Work With I collaborate with professionals across various industries, ensuring that their designs are both functional and visually compelling: 🏡 Architects & Interior Designers – High-quality 3D renderings and floor plans. 🏗 Construction & Engineering Firms – Detailed execution drawings for structural elements. 🛋 Furniture & Woodworking Experts – Optimized technical plans and material estimates. 🎭 Event & Exhibition Designers – Stand designs, immersive 3D scenography, and presentation visuals. 🔹 Software & Tools I use industry-leading software to ensure precise, professional results: ✅ SketchUp Pro – 3D modeling and design optimization. ✅ V-Ray – Photorealistic rendering for high-end visual presentations. ✅ AutoCAD – Technical drawings and execution plans. ✅ Photoshop – Post-production enhancement and graphic editing. 🔹 Why Choose Snap3DWorks? ✔ Precision & Accuracy – Every model and plan is crafted with the highest level of detail. ✔ Fast Turnaround – Efficient workflow to meet your project deadlines. ✔ Custom Solutions – Tailored services for your specific industry needs. ✔ Clear Communication – I ensure smooth collaboration through regular updates. 🔹 Get in Touch Looking for a reliable 3D modeling expert for your next project? Let’s collaborate! I’m available for freelance projects, long-term contracts, and custom consultations. 📩 Contact me today to discuss your project and get a custom quote. Let’s bring your vision to life with expert 3D solutions! 🚀

I am a 25 year old Danish landscape architect, with a master degree in landscape planning. I have specialized myself in environmental design with focus on rewilding the urban space and creating coll... Read more

I am a 25 year old Danish landscape architect, with a master degree in landscape planning. I have specialized myself in environmental design with focus on rewilding the urban space and creating collaboration between nature, users, urban environment and architectonic aesthetics. I have during my studies been working at different studios in Denmark and United Kingdom. After my master degree I started working at the oldest landscape studio in Denmark. During my work experience I have been working on large scale masterplans, planting schemes, private gardens, schoolyard and other institutions. I have been managing projects, been IT-coordinator and the go-to person when it came to digital drawing and program management. On the side I started my own firm. In my firm I have been working with clients on designing and detailing large master plans and developing housing projects for private clients. I also work closely with other landscape architects on converting hand drawings to digital drawings. I have many years of experience in transforming drawn design into digital drawings, and are therefor very efficient in AutoCAD, Adobe Creative Suite, SketchUp and render programs as Lumion and Maxwell. I am very motivated and passionate about my work. I try to accommodate clients wishes and enhancing the quality of the projects by applying my knowledge and design skills. I work hard and dedicated and love getting new work that I can use my skills with. Kind regards, Isabella Friis

Product and furniture designer with 15+ years of experience leading teams, and developing bespoke solutions and products for the furniture industry.

Product and furniture designer with 15+ years of experience leading teams, and developing bespoke solutions and products for the furniture industry.