Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC... Read more

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with other trades. • Design energy efficient HVAC systems in Autocad for residential andcommercial(stores,medical facilities,schools,offices) buildings in NYC also do Shop Drawings. •Coordinate HVAC design with other trades: plumbing,• sprinklers,RCP Review applicable design standard requirements, codes and regulations as they relate to the project according to ASHRAE or NYCECC. •Assist the Lead Mechanical Engineer on the development of Instrumentation and Control design for Mechanical systems. • Approve Shop Drawings. • Prepare plans,specifications,schedules,documentation. • Processing Comecheck and Energy Conservation codes. • Prepare as-built drawings.

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection,... Read more

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site planning, site design, roadway design, stormwater management planning and design (gray infrastructure and LID/Green infrastructure), hydrology/hydraulics, entitlements and permitting, project scheduling, cost estimating, franchise utility coordination, and construction phase services. B.S. in Civil Engineering from California Polytechnic State University, San Luis Obispo, CA Project experience in the CA, NJ, and NY markets. Proficient in the following design software programs: AutoCAD Civil 3D as well as HydraFlow Hydrographs and Vehicle Tracking extension to the program, Flowmaster, StormCAD, and ArcGIS.

Just about to lose my mind on furlough - looking for creative and interesting projects to take on. I love a challenge and have a good amount of experience in the design world. Happy to have... Read more

Just about to lose my mind on furlough - looking for creative and interesting projects to take on. I love a challenge and have a good amount of experience in the design world. Happy to have projects to add on to my portfolio.

Experienced architect over +5 years with a history of working in architecture and interior design, conceptual designs/planning, design development, working drawings/ shop drawings, site safety... Read more

Experienced architect over +5 years with a history of working in architecture and interior design, conceptual designs/planning, design development, working drawings/ shop drawings, site safety plans, 3D modeling reviewing drawings and material for approval, client meetings, walkthroughs and site supervision. Also, skilled in Integrated Architectural Design and Communication and ability on realization of ideas and project development.

Born in Phoenix, Arizona I was raised with high work ethic imparted by my many family members in the building community. I received my first associated degree from Glendale Community before... Read more

Born in Phoenix, Arizona I was raised with high work ethic imparted by my many family members in the building community. I received my first associated degree from Glendale Community before relocating to New York City. In New York I gained a wide variety of work experiences, in wich, all culminated in a great understanding of the bottom line in any industry. Later in Austin, Texas, I received my second associate degree in Drafting. There I had the opportunity to apply my leadership and problem-solving skills to grow a business. Through Design and pragmatic thinking I was able to gain the experience to design for the lifetime of a product or space. Today I have found myself back in New York continuing my design experiences and process development as I complete my bachelor's degree.

I am a 25 year old Danish landscape architect, with a master degree in landscape planning. I have specialized myself in environmental design with focus on rewilding the urban space and creating... Read more

I am a 25 year old Danish landscape architect, with a master degree in landscape planning. I have specialized myself in environmental design with focus on rewilding the urban space and creating collaboration between nature, users, urban environment and architectonic aesthetics. I have during my studies been working at different studios in Denmark and United Kingdom. After my master degree I started working at the oldest landscape studio in Denmark. During my work experience I have been working on large scale masterplans, planting schemes, private gardens, schoolyard and other institutions. I have been managing projects, been IT-coordinator and the go-to person when it came to digital drawing and program management. On the side I started my own firm. In my firm I have been working with clients on designing and detailing large master plans and developing housing projects for private clients. I also work closely with other landscape architects on converting hand drawings to digital drawings. I have many years of experience in transforming drawn design into digital drawings, and are therefor very efficient in AutoCAD, Adobe Creative Suite, SketchUp and render programs as Lumion and Maxwell. I am very motivated and passionate about my work. I try to accommodate clients wishes and enhancing the quality of the projects by applying my knowledge and design skills. I work hard and dedicated and love getting new work that I can use my skills with. Kind regards, Isabella Friis

I am an Industrial Designer who specializes in product and furniture design for the housewares industry. My work incorporates all aspects of the design process, from concept to mass production.... Read more

I am an Industrial Designer who specializes in product and furniture design for the housewares industry. My work incorporates all aspects of the design process, from concept to mass production. With a BFA in Furniture Design from the Rhode Island School fo Design, I continue to work with clients who are in need of the following services: Industrial Design - Sketching concepts, 3D modeling in Rhinoceros, wireframe surfacing for complex forms, 3D printing and rapid prototyping, technical drawings and specifications for mass production, product renderings in Keyshot, renderings and line drawings for packaging, presentation design for buyer meetings and line sheets Product Development - Market and trend research, knowledge of materials and manufacturing capabilities, reviewing prototypes and physical samples of products, testing products to improve features for future iteration, participating in meetings with buyers, travel for trade shows and factory visits in China, and professional communication with domestic and international vendors. Communication - Keeping open communication with clients to further understand their needs and expectations, delivering all deliverables by set deadlines, ability to answer questions that clients may have in regards to designing for mass production, transparent workflow and availability Through my time working as an Industrial Designer, I continue to design products for the largest retailers in the housewares industry, including Target, Bed Bath and Beyond, Costco, Walmart, Macy's, and many more. If your company is currently looking to develop a product, please feel free to contact me. I hope to work with clients who are interested in developing many products in the future. Thank you for your time and consideration!

My passion lies in bringing ideas to life. I'm an owner of an absurdly large 3D Printer, a certified CAD designer, and an avid tinkerer. I'm located in Bensonhurst, a short drive from Bay Ridge,... Read more

My passion lies in bringing ideas to life. I'm an owner of an absurdly large 3D Printer, a certified CAD designer, and an avid tinkerer. I'm located in Bensonhurst, a short drive from Bay Ridge, and bordering Staten Island. My starting printing price is $0.35/cm^#3, but i'll lower that drastically if your print is large or if it's multiple prints. I'll also throw in a free print if you print with me twice. Looking forward to hearing from you! Printer Specs: - Artillery Sidewinder x1 - 300x300x400 mm print bed size - I use PLA+, a PLA and ABS composite for added strength and looks awesome Design Qualifications: - AutoCAD User Certified - PT1 CSWA (Certified SolidWorks Associate)

- Strong experience in SolidWorks and CREO 4.0 (ProE) - Former design intern at Stanley Black & Decker - Teaching Assistant for SolidWorks at Ohio State Read more

- Strong experience in SolidWorks and CREO 4.0 (ProE) - Former design intern at Stanley Black & Decker - Teaching Assistant for SolidWorks at Ohio State

SolidWorks specialist with experience in many types of design on demand services such as design for manufacture, new product design, medical devices and much more. Read more

SolidWorks specialist with experience in many types of design on demand services such as design for manufacture, new product design, medical devices and much more.

I have over 8 years of international experience in interior design and architecture. I've designed and installed projects such as shop window displays, pop ups, and residential spaces. My skills... Read more

I have over 8 years of international experience in interior design and architecture. I've designed and installed projects such as shop window displays, pop ups, and residential spaces. My skills include 2D CAD drawing and 3D rendering in Sketchup and Photoshop. I have a grounded background with a Bachelor’s degree in Architecture and a Masters in Design Studies. I have plenty of experience sourcing FF&E, creating client presentations, drafting furniture layouts and details in CAD, working with contractors, and project managing among other responsibilities. I'd love the opportunity to meet you and see how we can bring your space to life! I can provide more work samples upon request.

After graduating from School of Visual Arts with a BFA in interior design, I have been working as a mechanical drafter for a sub-contractor for the past 8 years. I am a highly motivated and... Read more

After graduating from School of Visual Arts with a BFA in interior design, I have been working as a mechanical drafter for a sub-contractor for the past 8 years. I am a highly motivated and progress-focused senior drafter who has coordinated and oversaw projects over $36M in NYC.

Daniel is a dynamic and multi-talented individual with a diverse range of interests and experiences. As an accomplished architect and BIM specialist, Daniel has honed his skills in visual... Read more

Daniel is a dynamic and multi-talented individual with a diverse range of interests and experiences. As an accomplished architect and BIM specialist, Daniel has honed his skills in visual communication and 3D design, pushing the boundaries of innovation and creativity in his work. With a passion for sports and a keen eye for photography, Daniel is also a talented contemporary artist, exploring the intersection of technology, culture, and human experience in his stunning pieces. Through his travels and experimentation, Daniel continues to push the envelope in AEC industries internationally, always striving to create better more projects and experiences that give a ROI to unique clients. Whether working independently or collaborating with others, Daniel is a team player at heart, dedicated to finding new and innovative ways to solve problems and create value in everything he does. Daniel is a compassionate person who is committed to making a positive impact on society. He is involved in volunteer work that reflects this desire to help others.