About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in... Read more

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in love to design the concept base models and is always ready to bring creativity in the design out of the way. A guy who is ready to work with company to solve not only to solve the design problems but will bring the creativity in the design through economically as well as the safety point of view. I'll provide you the complete assistance in the FEA analysis in ANSYS workbench under static structural and transient modules of the ANSYS Workbench. I have done FEA analysis on the Cantilever beam under 6 DOF and also on springs for there responses as well as the fundamental frequencies associated with them and also available to do FEA analysis anytime you need me. I have done the FEA of the Spar Design of the Airplane with the beam, jigs and ribs i have lot of work and i can share it as well with the right person.

I am skilled at engineering designs and simulations and have done various projects on designing, assembling and performing structural, thermal and flow simulations such as design and analysis of a veh... Read more

I am skilled at engineering designs and simulations and have done various projects on designing, assembling and performing structural, thermal and flow simulations such as design and analysis of a vehicle, design and thermal analysis of engine exhaust valve, design, and analysis of bolted flange of Nastran Rocket, Flow simulations through channels and pipes. I have certifications in Computer Aided Designing using Solidworks 3D CAD and AutoCAD. I have good practice and certification on Engineering simulations using Ansys from Cornell University.

Aerospace Engineer with strong expertise in CFD, aerodynamics, and control systems. Skilled in ANSYS Fluent, COMSOL, OpenFOAM, and Python-based automation for simulation and optimization. Experienced... Read more

Aerospace Engineer with strong expertise in CFD, aerodynamics, and control systems. Skilled in ANSYS Fluent, COMSOL, OpenFOAM, and Python-based automation for simulation and optimization. Experienced in projects ranging from supersonic intake design and UAV control to aerodynamic analysis of airfoils and automotive components. Hold a BSc in Aerospace Engineering, with proven ability to deliver accurate, high-fidelity simulations and practical engineering solutions.

I am a Mechanical Engineer and CAD Expert with experience of 7 years As a dedicated full-time freelancer, I provide Product Development and Reverse Engineering services to clients. Products and 3D CA... Read more

I am a Mechanical Engineer and CAD Expert with experience of 7 years As a dedicated full-time freelancer, I provide Product Development and Reverse Engineering services to clients. Products and 3D CAD Models including Sheet Metal Designs, 3D Printed Designs, Composite Designs, and Plastic Designs (Injection Molding, Thermoforming). The designs are Validated using Simulation and Mechanical Analysis along with the selection of appropriate materials, and enhance overall design quality. Following prototyping of the Products, I provide comprehensive manufacturing drawings alongside compelling rendered images and animations that vividly showcase product and the assemblies. My approach is driven by efficiency, both in terms of design timelines and costs. I integrate pre-existing manufactured parts and components from a spectrum of suppliers into my designs. By doing so, I ensure not only economical design execution but also preemptive mitigation of redundant manufacturing expenses. All this is presented with meticulous detail, including material selection, Bill of Materials (BOM), and accessible sourced links. In Tight Tolerance Project, I implement Tolerance Analysis in Assembly Design, where I adhere to ISO 286 and ISO 2768 Tolerance standards. For accurate and precise manufacturing, I use ASME Y14.5 GD&T in manufacturing drawings. Feel Free to contact me regarding your project and I will be glad to share my insight. My diverse project history includes: • Product Design encompassing metal, plastic, and composite materials • Designing 3D Printed Components • Plastic Injection Molded Designs • Automotive Parts with Precision • Sheet Metal Designing • Composite Mold Designs • Plastic Design Solutions • Part Designs for Machining Processes My capabilities also extend to the domain of transforming 3D Scans into robust 3D CAD Models: # 3d Scan Alignments and Registration/Merging # 3d Scan Data, Mesh Data and Point Cloud Data optimization # Conversion of 3D Scan Data to 3D CAD Model # STL, XYZ, PLY to STEP # Accurate CAD Model with Deviation Analysis # 2D Drawings from 3D Scanned Data # Area, Volume Calculations, and Inspection of 3D Scan Data # 3D Scan and 3D CAD Comparison report # 3D Scan Data to Assembly model # 3D Scan to Mold Designs of parts Mechanical Analysis and Simulations; 1. Design Strength analysis to find the factor of safety under loads. 2. Structure Designs Analysis for Load distributed to Foundation. 3. CFD Analysis for Drag, lift forces. 3D Printed Parts: # 3D Printed Enclosures or Casings for Electrical and Electronic PCB devices # 3D Printed Gadgets # 3D Printed parts for Machines such as gears, brackets. # 3D Printed parts for Products and Prototypes Softwares I use; 1. SolidWorks / SolidWorks Simulation 2. Catia 3. Geomagic Design X 4. Meshmixer 5. Creality Slicer 6. Keyshot Deliverables: 1. .OBJ, .STL .STEP, .IGES, X_T (Parasolid) etc formats 2. SolidWorks, Inventor, Creo, and Catia formats 3. 2D Drawings in .dwg, PDF, DXF 4. Rendered Images 5. Rendered Animations

A CSWA-certified SolidWorks designer with expertise in 3D modeling, CAD drafting, and product design. I specialize in creating precise and optimized mechanical designs, with experience in FEA simulati... Read more

A CSWA-certified SolidWorks designer with expertise in 3D modeling, CAD drafting, and product design. I specialize in creating precise and optimized mechanical designs, with experience in FEA simulations, rapid prototyping, and technical drawings. I hold a BS in Mechanical Engineering from UET Taxila and have worked on projects like aerospace winglet optimization and custom mechanical components. My goal is to deliver high-quality, innovative designs that meet engineering standards.

Designer with expertise in AutoCAD. I have designed various floor plans and building plans. Also Network Equipment Designing is also one pf my expertise

Designer with expertise in AutoCAD. I have designed various floor plans and building plans. Also Network Equipment Designing is also one pf my expertise

Graduate Mechanical Engineer with a rich experience in CAD Modeling, CFD Simulations, Electrical Circuit Simulations, Mechanical Design and Analysis. I feel at home while making digital designs, furth... Read more

Graduate Mechanical Engineer with a rich experience in CAD Modeling, CFD Simulations, Electrical Circuit Simulations, Mechanical Design and Analysis. I feel at home while making digital designs, further I ensure a reliable safety factor by simulating them under real world scenarios. Additionally, I also have a keen interest with Adobe Creative suite making appealing posters for my project's team. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ This is our team's Official Instagram handle, which depicts our recent progress as a part of a national level competition "Piston Cup 2023". All of us, the undergrads, went through a rich experience designing our buggy's chassis, fabricating it, iterating lot of times for strength analysis, and then finally brought up a fully functional off-road terrain racing BAJA SAE buggy. The software used was Fusion360, SolidWorks mainly. It made us stand 3rd nationally in the competition which justified our efforts.

I am a Mechanical Engineer recently graduated. Currently I am doing my MS in Mechanical Engineering. I have a good command on 3D modelling software i.e. SolidWorks and Simulation software ANSYS.

I am a Mechanical Engineer recently graduated. Currently I am doing my MS in Mechanical Engineering. I have a good command on 3D modelling software i.e. SolidWorks and Simulation software ANSYS.

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and... Read more

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and 6 axles vehicle. -Already available analytical approaches were studied: Elastic Curve Equation, Three-Moment Equation, and Beams on Elastic Foundation. - Experimental Rig setup was devised and results were compared with the computational methodology. - A research paper of this study was published in IBCAST-2016 Conference. b. FEA Study of Crane Out trigger Mat -Developed a finite element analysis procedure for simulation of stiffness behavior of foundations under large-scale loads. -The study was required for criteria building of ATPs for safe handling of the crane and its outriggers. -It was also published in the International Conference on Structural Dynamics & Vibrations (ICSDV-2014). c. Mathematical Modeling of 8 Axle Vehicle Steering - Mathematical modeling in MATLAB/SIMULINK for an eight- axle steering system to simulate the behavior while turning for 6DOF Steward Platform Motion Simulator. Mechanical Design Projects a. Landing Gear of a Light Aviation Grade RC Plane (Ongoing Project) - Mathematical modeling of landing gear placement and finalization of its configuration. - Mechanical component design of the nose and main landing gear deploying mechanisms with locking and unlocking arrangements at deployed and retracted positions as per QMS of AS-9100C. - Closing/Opening of landing gear stowage bay door with the same EMA of the nose landing gear. b. Mechanical Design - Modeling and designing of various mechanical structures/mechanisms using CAD modeling software. - Preliminary and detailed engineering calculations at the conceptual and detailed engineering phase of the project. -Validation of modeled systems through the aid of FEA tools (ANSYS/ABAQUS). -Taking projects through the Phases of Product Development Cycle (PDC) as per QMS of ISO or AS- 9100C.

Hi I am Umer, Mechanical Engineer, I have a great proficiency in drafting, designing and simulations especially in AutoCad, Solidworks and Ansys. I try as much as possible to be realistic and bring y... Read more

Hi I am Umer, Mechanical Engineer, I have a great proficiency in drafting, designing and simulations especially in AutoCad, Solidworks and Ansys. I try as much as possible to be realistic and bring your ideals to designs which can be implemented. Regarding FEA I have worked on the mesh techniques,result convergence and solver types for the best possible accuracy. I offer the following services: 1) 2d and 3D drafting and design 2) Modelings 4) Simulations And Design Analysis Report Writing 4) Detailing of drawings 5) 3D Printing and STEP files I will be using SOLIDWORKS 2016 and ANSYS 18.2. I assure you precise designs and accurate results. I am keen to work and interact with people all over the world I believe that respect is the word that matters the most in the world of Freelancing.

My strengths include: Time Management. Team Management. Project Management. My skillsets includes: MATLAB Coding. C++ Coding. R Language. Ansys Software. Creo Parametric Software. SolidWorks. AutoCAD.... Read more

My strengths include: Time Management. Team Management. Project Management. My skillsets includes: MATLAB Coding. C++ Coding. R Language. Ansys Software. Creo Parametric Software. SolidWorks. AutoCAD. MS Excel. MS PowerPoint. MS Word. Heat CAD. Heat Analysis Program (HAP). COMSOL. During my Bachelor's in Mechanical Engineering, I have worked on the following Projects: Solar Based Agricultural Seed Sprayer. Line Following Robot. Analyzing the effect on the lift and drag force on an airfoil with and without winglet. Shell and tube heat exchanger with counter flow. In my Final Year Project, I worked along with my other team members on the project with title of: Design, Simulation and Fabrication of CNC Milling and Laser Engraving Machine for PCB Fabrication.

Have worked on following softwares: - Auto-CAD 2-D and 3-D - creo parametric 3-D and automation simulation - Auto desk inventor - solid works 3-D modelling and machining - Ansys 3-D modelling with an... Read more

Have worked on following softwares: - Auto-CAD 2-D and 3-D - creo parametric 3-D and automation simulation - Auto desk inventor - solid works 3-D modelling and machining - Ansys 3-D modelling with analysis