Hire the best freelance Dynamic Stress Analysis expert designers for your company

AnalysisPros is an independent Finite Element Analysis Services (FEA) firm, established in 1994, dedicated to support the design and engineering community with FEA applied knowledge and access to the... Read more

AnalysisPros is an independent Finite Element Analysis Services (FEA) firm, established in 1994, dedicated to support the design and engineering community with FEA applied knowledge and access to the latest analysis solutions and technology. The company provides structural (linear and nonlinear, static and dynamic), thermal, fluid and MoldFlow analysis capabilities utilizing FEA tools. The company mission is to provide its clients with the best analysis solutions available and the highest level of support and quality possible. The company provides analysis services to almost any imaginable application. Application of the FEA methods range from traditional Aerospace, Automotive and Medical to the Entertainment and Toy industries. AnalysisPros clients include design and engineering firms that have a need for an occasional and reliable analysis services on their designs. This service is an alternative option to companies which do not have large enough volume of analysis that justifies the purchase, maintenance and dedicated personnel for doing the analysis work. It directly translates to saving in time and money by utilizing a company that has the latest FEA technology and experience readily available. By using the service, it is possible to generate a simulation of any designed structure, loaded with almost any imaginable way. Through the use of FEA tools and many years of analysis experience, the virtual testing of any design is made possible in record time. AnalysisPros supports its clients at any stage of the engineering process. The analysis service helps in evaluating feasibility of new design as well as trouble shooting failed design already in the market and finding solutions without the need to prototype and waste time and money. For companies that comply with the ISO 9000 design process and FEMA recommendations, numerical analysis and virtual testing, verification and validation is a must. FEA methods provide the capability for companies to establish a design review at any stage in the project. The benefits of starting analysis early in the design cycle translates later to savings in cost. By validation and verification of the design, before even prototyping, true optimization can be achieved through a predictive testing.

Currently I'm an aerospace engineering student. During the passed more than 4 years, I've completed a large number of projects connected to 3d modeling, drafting, reverse engineering, analysis and cal... Read more

Currently I'm an aerospace engineering student. During the passed more than 4 years, I've completed a large number of projects connected to 3d modeling, drafting, reverse engineering, analysis and calculations of forces, stress, displacement, fatigue, aerodynamics. By the way, I'm a 3D designer of heating and cooling systems, so I enrich my knowledge daily. I love and I am able to create new things, it's my passion. But simultaneously I know physics, strength of materials, theoretical mechanics and other subjects to keep my inventions real and rational

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

Mechatronic engineering with extensive field experience, specialized in engineering production design and optimization.

Mechatronic engineering with extensive field experience, specialized in engineering production design and optimization.

I’m a self-driven and creative CAD designer who works mainly in Autodesk Inventor. I love turning sketches, ideas, or rough concepts into clean, production-ready 3D models. I also offer basic simulat... Read more

I’m a self-driven and creative CAD designer who works mainly in Autodesk Inventor. I love turning sketches, ideas, or rough concepts into clean, production-ready 3D models. I also offer basic simulation services, such as stress or airflow analysis, to help you understand how your design performs in the real world. Whether you need a part for prototyping, 3D printing, mechanical assemblies, or early concept visualization — I’m here to help. I work fast, communicate clearly, and I’m always focused on understanding the real problem before jumping to solutions. I’m still building experience professionally, so I keep my rates fair and flexible. What I can help with: 3D CAD modeling from sketch or idea Mechanical parts and assemblies Export to STEP, STL, IGES, DWG Design for 3D printing or manufacturing Basic simulation (stress or airflow analysis)

I am a vibration and FEA expert with 10 years of professional experience. I hold a PhD in Structural Dynamics and I am a Chartered Mechanical Engineer (CEng MIMechE). I diagnose vibration issues, vali... Read more

I am a vibration and FEA expert with 10 years of professional experience. I hold a PhD in Structural Dynamics and I am a Chartered Mechanical Engineer (CEng MIMechE). I diagnose vibration issues, validate structures with FEA, and optimise mechanical designs for strength, durability, and reliability using advanced engineering simulations. I deliver clear reports, data-driven insights, and practical recommendations, giving you the confidence to make safe and efficient engineering decisions. ⚙ Vibration Engineering & Dynamic Analysis ⚙ ✔ Vibration troubleshooting & resonance control: resonance mapping, mode tuning, root-cause diagnostics ✔ Modal analysis, EMA/OMA & testing: damping estimation, mode-shape interpretation, shaker campaigns, sine/random vibration, shock testing ✔ Signal processing & data interpretation: accelerometer-based insights, FFT, waterfalls, envelope methods, feature extraction, spectral analysis, DAQ and test-setup planning ✔ Python for vibration analysis: automated diagnostic pipelines and ML-based anomaly detection ✔ R&D support and development of clients’ in‑house vibration analysis capability ✔ Design optimisation for vibration performance: stiffness tuning, mass distribution, damping and dynamic response refinement ⚙ FEA: Static, Transient & Fatigue Analysis ⚙ ✔ FEA for structural integrity: strength, stiffness, stability, and deformation under realistic loading ✔ Transient FEA: impacts, shocks, rapid load changes, and start-up/shutdown events ✔ Non-linear FEA: contact, plasticity, material nonlinearity, and large-deformation behaviour for complex structures ✔ Fatigue & durability prediction: stress-life and strain-life methods to reduce failure risk and extend service life ✔ Design optimisation: eliminate hotspots, improve stiffness, and increase overall reliability ✔ Salome_Meca, Code_Aster and Paraview user ⚙ Rotordynamics & High-Speed Machinery FEA ⚙ ✔ Critical-speed and stability assessment for pumps, compressors, turbines, and other rotating machinery ✔ System-level rotordynamics evaluation: Campbell/Bode analysis and run-up / coast-down behaviour for multi-stage rotors, pump trains, and rotor-bearing systems ✔ FEA for rotating components: blades, impellers, rotors, couplings, and high-speed assemblies assessed for stiffness and deformation control ✔ FEA for static components: casings, housings, pump volutes, bearing pedestals, and structural frames analysed for load transfer, thermal effects, and long-term reliability ✔ Design refinement for rotating machinery: mass-stiffness balancing, blade/impeller geometry tuning, and structural improvements that enhance performance and reduce maintenance issues ⚙ CFD (Computational Fluid Dynamics) ⚙ ✔ Flow performance analysis: pressure, velocity, and flow-distribution insights for ducts, manifolds, nozzles, and mechanical systems ✔ CFD for pumps & turbomachinery: impeller/volute flow behaviour, hydraulic efficiency, cavitation risk, and blade-passage optimisation ✔ Pressure-drop & flow-resistance evaluation: system-level assessments to reduce losses and improve efficiency in pipework and mechanical assemblies ✔ Design improvements from CFD results: geometry adjustments, smoother flow paths, reduced recirculation, and enhanced performance ✔ OpenFOAM user ⚙ CAD / Mechanical Design Modifications ⚙ ✔ Structural refinement & geometry optimisation: ribbing, filleting, thickness tuning, load-path improvements, and mass redistribution to eliminate stress hotspots ✔ CAD updates: translating engineering recommendations directly into updated CAD models ⚙ What I Bring to Your Project ⚙ ✔ Highest engineering standards – I adhere to recognised engineering codes of ethics and avoid pirated software, half-ready solutions, or any practices that could compromise your project. ✔ Clear communication & responsiveness – fast replies, transparent progress updates, and clear explanations of technical topics. ✔ Actionable outputs & implementation support – practical recommendations you can apply immediately, plus guidance during and after the project. ✔ Reliable delivery – on time, within budget, and to the agreed technical quality. ⚙ Typical Deliverables ⚙ ✔ Action-oriented engineering reports – clear conclusions, safety margins, and practical recommendations (typically 5–12 pages, concise and decision-ready). ✔ Vibration & rotordynamics outputs – Bode/Campbell diagrams, frequency spectra, waterfall plots, and ODS/modal shapes with safe-operating ranges and tuning advice. Typical outcome: vibration reductions of 40–70% in problematic speed bands after design, support, or balance adjustments. ✔ FEA results & design changes – stress/fatigue plots, modal frequencies, safety-factor maps, stiffness checks, and targeted geometry up ➡️ Get in touch if you’d like an initial review of your vibration or FEA challenge — we can discuss the best approach by chat or jump on a short intro call ➡️

3D Modeling with 5+ years of expense in the Aluminum Extrusion design industry. Specializing in Aluminum extrusion design, plastic injection mold design. Knowledgeable in US Build codes and requirem... Read more

3D Modeling with 5+ years of expense in the Aluminum Extrusion design industry. Specializing in Aluminum extrusion design, plastic injection mold design. Knowledgeable in US Build codes and requirements.

I’m a Mechanical Engineer (5+ yrs.experience) offering a passion for leading product design projects. Excellent communicator with the ability to explain complex design ideas and concepts effectively... Read more

I’m a Mechanical Engineer (5+ yrs.experience) offering a passion for leading product design projects. Excellent communicator with the ability to explain complex design ideas and concepts effectively experienced in all aspects of hardware design, theories of operation. I`m currently working on a 100 kW Micro gas turbine Project in Aerostrovilos Energy PVT LTD.

With over two years of experience designing materials handling equipment at Podmores, I specialize in 3D modeling, technical drawings, and CAD automation using SolidWorks and DriveWorks. Holding a Mas... Read more

With over two years of experience designing materials handling equipment at Podmores, I specialize in 3D modeling, technical drawings, and CAD automation using SolidWorks and DriveWorks. Holding a Master’s in Automotive Engineering, I’m a quick learner now proficient in Onshape and FreeCAD, delivering precise, manufacturable designs remotely using client-provided or free tools. I’m passionate about streamlining workflows and solving complex engineering challenges for manufacturing and product design clients.

I am a Professional Piping Stress Engineer with strong experience in Static & Dynamic Stress Analysis and Piping Design for critical process piping systems. I have worked on Heat Exchanger, Reactor, C... Read more

I am a Professional Piping Stress Engineer with strong experience in Static & Dynamic Stress Analysis and Piping Design for critical process piping systems. I have worked on Heat Exchanger, Reactor, Column, Pump, and other critical equipment connected lines where thermal flexibility, support optimization, and nozzle load control are highly important. I perform detailed stress analysis using CAESAR II, including sustained load, thermal expansion, occasional load, and dynamic analysis. I also provide detailed stress reports, support recommendations, and practical engineering solutions to ensure safe, reliable, and code-compliant piping systems. In addition, I work on piping design, routing, and drafting using AutoCAD and AutoCAD Plant 3D. ✔ Piping Stress Analysis ✔ Static & Dynamic Stress Analysis ✔ Detailed Stress Reports & Recommendations ✔ Critical Equipment Connected Lines ✔ Nozzle Load & Support Evaluation ✔ Hanger Support Design ✔ Piping Design & Drafting ✔ CAESAR II / AutoCAD / Plant 3D Expertise

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanica... Read more

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanical. My current specialty involves piping engineering (Stress analysis), Code Calculations; and well acquainted with Pipeline Calculations (Hydraulic analysis, Surge Analysis, Pipe Wall thicknesses for internal and external pressure; and branch Connection) as per Referenced ASME Standards. I have a wide exposure to different multinational engineering firm’s environments and standards through participation in part time and full time contracts projects. Core Competencies • Well acquainted with ASME Codes (B31.1, B31.3, B31.4, B31.8, SEC. VIII DIV. 1) Calculations • Preparation of technical specifications and design calculations • Preparing Critical Line Lists • Static and dynamic stress analysis of piping systems (Sustained loads, Expansion loads &Occasional load) Using CAESAR II • Specializing in pipe stress analysis and advising design team on arrangement and support requirement to work within code stress requirements • Pipe support hardware selection & details drawings. • Nozzle flexibility Check • Equipment Nozzles Calculation as per (NEMA SM23, API 610, API 617, API 661 and API 650) • Flanges(Raised & Flat Face, Reversed, Clamped hub) calculations • Isometric Stress Sketches and Civil info Sheets • Proper design of firefighting pipes supports and bracing as per NFPA 2010 chapter 9. • Buried Piping (ASCE, ALLA, PENG, AWWA, NEN 3650). Highlights ASME (B31.1, B31.3, B31.4, B31.8, Sec. Viii Div1); Autocad Plant 3D; AFT Fathom Impulse; Autopipe; Bentley Hammer; Bentley Water Gems; Caesar II; CADWORX; Fluid Networks Computation; Hangers And Springs Selection; Navis Work; Pipe Flo; Pipe Supporting; PRG 2011 (Nozzle Pro, Fe-Pipe, Fe-Bend, Fe-Sif); Revit Mep; Smart Plant 3D; Static & Dynamic Stress Analysis; Surge Analysis; Wall Thickness Calculations; PDMS

A Chartered mechanical engineer 27 years experienced in the design, implementation, and management of complex development projects. Excellent command of standard engineering practices for oil & gas u... Read more

A Chartered mechanical engineer 27 years experienced in the design, implementation, and management of complex development projects. Excellent command of standard engineering practices for oil & gas upstream, midstream, downstream, and Power industries. Specialties: Piping Layout ♦ Piping materials ♦ Static and Dynamic Piping Stress Analysis ♦ Pipe Support Engineering ♦ can Travel Offshore ♦ Project Management Professional Chartered Engineer (CEng), Engineering Council, UK Membership: Member (MIMechE), Institution of Mechanical Engineers, UK Software Skills: PDMS ♦ S3D ♦ Caesar II ♦ Autopipe ♦ PSA5 ♦ Navisworks ♦ Smart Review ♦ FEPipe ♦PVElite ♦ Ansys ♦ Microstation ♦ AutoCad ♦ Lotus Notes ♦ Smart Plant Foundation

I have 12 years of extensive experience in Piping (Stress & Layout) worked with Aker, Keppel shipyard and other large multinational companies in the offshore and Oil & Gas sectors. I have been activel... Read more

I have 12 years of extensive experience in Piping (Stress & Layout) worked with Aker, Keppel shipyard and other large multinational companies in the offshore and Oil & Gas sectors. I have been actively involved in the Stress analysis of FPSO, FNLG, and LNG carriers (Cryogenic lines). I have a B.Tech degree in Mechanical Engineering from a reputed college in India. Currently I offer the total range of Pipe Stress Analysis (Static & Dynamic) of offshore projects like FPSO, FLNG, FSRU, FSU and LNG carrier and Onshore projects like refineries and power plants. Brief Scope of Services Offered is described below: Stress Analysis ❖ Static and Dynamic analysis of Onshore and Offshore projects. • Static Analysis: Expertise in stress analysis of piping connected to static equipment such as Heat Exchangers, Vessels, Columns, Drums, Reactors, Heaters, Air Fin Fan coolers and tanks Expertise in stress analysis piping connected to rotary equipment such as Pumps (hot and cold) ,Compressors and Turbines. • Dynamic Analysis: ​​ Expertise in dynamic analysis using Caesar II 1. Modal analysis (vibration) 2. Time history analysis (surge, water hammer) 3. Response Spectrum analysis (earthquake) 4. Harmonic analysis. ❖ Identification of critical and non-critical lines and in preparation of stress design basis. ❖ Expertise in basic stress concepts, failure theories and fatigue failure concepts. ❖ Expertise in using judiciously all pipe supports like shoes, saddle, guides, line stops, springs, struts, expansion joints, clamps, U-bolts, adjustable supports etc. ❖ Expertise in calculating static equivalent for occasional case like, seismic, wind and psv. ❖ Expertise in structural sway, two phase flow and slug flow analysis. ❖ Expertise in analysis of jacketed piping (weld check, thickness requirement, buckling check, spacers) for SRU plant. ❖ Competent in analysis of FRP piping (BS 7159). Their Difference from Metallic piping, parameters differences like physical properties, allowable etc. ❖ Familiar with all relevant and applicable design codes like: ASME B31.3 (process piping), ASME B31.1 (power piping), B31.4 (fuel gas piping) B31.8 (gas transmission and distribution, ASME SECTION VIII DIVISION 1 and 2., BS 7159 (FRP), PD5500, DNV ❖ Expertise in using Caesar II. Software Available: 1. CAESARII 6.1 version 2. Auto-Cad 2012

More than 10 years experience of designing of piping systems in 3D. Autocad/ Cadworx, PDMS. More than 4 years experience as Pipe stress engineer in CAESAR II. Projects: 2020 – Expro s.r.o. – Static... Read more

More than 10 years experience of designing of piping systems in 3D. Autocad/ Cadworx, PDMS. More than 4 years experience as Pipe stress engineer in CAESAR II. Projects: 2020 – Expro s.r.o. – Static analysis of steam piping – Reconstruction of steam RCHS 2020 – Intech s.r.o. – Static and dynamic analysis of OVZ – Slovnaft a.s., unit 28 2020 – Intech s.r.o. – Static and dynamic analysis of OVZ – Slovnaft a.s., unit 25,45,44 and 54 2019 - OVZ - increasing reliability of OVZ pipeline - documentation for construction_mechanical part, LPE, static and dynamic analysis of pipeline - Slovnaft, a.s. 2019 - AVD6 - desalters replacement - documentation for construction_mechanical part, static analysis of pipelines - Slovnaft, a.s. 2018/19 - AAG - production capacity increase, replacement of duplicator pipelines - documentation for construction_mechanical part, static analysis of pipelines Slovnaft, a.s. 2018 - SWAATS CW filtration - documentation for construction_mechanical part - Slovnaft, a.s. 2018 - Diesel storage tank - documentation for construction_mechanical part - SAM - SHIPBUILDING AND MACHINERY, a.s. 2018 - RHC - replacement of air filters - documentation for construction_mechanical part - Slovnaft, a.s. 2018 - PYO - new storage tanks - static analysis of pipelines - Slovnaft, a.s. 2018 - NRN - new storage tank - static analysis of pipelines - Slovnaft, a.s. 2018 - AD5 - replacement of pump P7B - documentation for construction_mechanical part, static analysis of pipelines, as built doc. - Slovnaft, a.s. 2017/18 - SWAATS - static analysis of pipe systems - Stercorat Hungary Kft. 2017/18 - SWAATS - documentation for construction, as built doc. _mechanical part - Stercorat Hungary Kft. 2017 - HRP5 - replacement of exchangers pipelines - static analysis of pipe systems 2016 - Replacement of Waste Heat Boiler - documentation for construction_mechanical part - Slovnaft, a.s. 2016 - TBA - flooding protection - documentation for construction_mechanical part - Slovnaft, a.s. 2016 - Flowmeter replacement for Sulfenax - documentation for construction_mechanical part - Duslo, a.s. 2016 - Increasing reliability of PU SAR_ESP filter - documentation for construction_mechanical part - Slovnaft, a.s. 2015 - LDPE4 - AIR DOSING - documentation for construction_mechanical part - Slovnaft, a.s. 2011/15 - Power plant Mochovce - Slovenské elektrárne, a.s.

I am a Mechanical Engineering graduate with over 10 years of experience in Piping Stress Analysis. My career spans across diverse sectors including Oil & Gas, Fertilizers, Power Plants, Refineries, an... Read more

I am a Mechanical Engineering graduate with over 10 years of experience in Piping Stress Analysis. My career spans across diverse sectors including Oil & Gas, Fertilizers, Power Plants, Refineries, and more. I have successfully handled projects involving both metallic and non-metallic piping systems, ensuring compliance with international codes and standards. My expertise includes: • Proficiency in industry-standard software like CAESAR II and ANSYS. • In-depth knowledge of ASME, API, and other piping codes. • Experience in thermal, seismic, and dynamic analysis of piping systems.

Summary biography 14+ years of experience in Development of Detailed and Design engineering for Oil & Gas, Chemical, Petrochemical & Pharmaceutical Industries as Piping Stress & Support Engineer. Core... Read more

Summary biography 14+ years of experience in Development of Detailed and Design engineering for Oil & Gas, Chemical, Petrochemical & Pharmaceutical Industries as Piping Stress & Support Engineer. Core Skill Set ❖ Perform stress analysis for various systems such as: Fired Heater to Reactor piping, Air cooler piping, Pumps piping, large storage tank piping, Cooling Tower piping, Non-metallic piping, PSV piping, Low temperature cryogenic and LNG piping and Jacketed piping’s. ❖ Perform Dynamic analysis (Water Hammer/ Slug Flow – Spectrum) for Surge effects. ❖ Perform stress analysis for Underground & Aboveground pipeline’s (Metallic & Non-Metallic piping). ❖ Perform stress analysis in brown field scopes like Re-Rating study and Cold spring recommendations. ❖ Perform vibration study AIV (Acoustic induced) / FIV (Flow induced) as per EI guideline. ❖ Perform FEA (Using Nozzle Pro) for evaluation of stresses at nozzles, for determining user calculated SIFs, Strength check for welded pipe attachments (like Shoe, Saddle, Lugs, etc,). ❖ Experienced in selection of Expansion joints (Metallic & Non-metallic), springs/struts/Snubbers/Cold supports and their data sheet preparations, MRE, MRO, TBA & Vendor document review. ❖ Able to review customer technical requirements and incorporate in project related pipe stress specifications. ❖ Well conversant with codes & standards like ASME (B31.3,31.4,31.8), API, ISO 14692, ExxonMobil Standards (GP, GII, DP), SHELL DEP & Kuwait Oil Corporation (KOC) Standard’s. ❖ Experienced in resolve site queries of construction team. Proficient in Software • Caesar II - Stress Analysis tool • PRG FEA 2018 – Finite Element Analysis tools • Auto Cad – Drafting tool • SPR & NAVIS – Review tools • MS office tools

Expertise : Perform 3D CAD Design, Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), and Motion Study (Multibody Kinematics & Dynamics) using state of the art software. If you don'... Read more

Expertise : Perform 3D CAD Design, Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), and Motion Study (Multibody Kinematics & Dynamics) using state of the art software. If you don't have the time and extra staff to design and analyze your product, you can contact me in order to solve your design & analysis problem. I design & analyze your product, you approve it and you get all results. I am offering a wide range of below services : 1). Mechanical Design This includes any mechanical device and machine. This also includes redesign and optimization of existing parts or equipment. 2). Product Development Need a new product for a specific application? I will help you to realize that. I will work to develop new products or optimize existing products for a reduction in material and/or manufacturing costs. 3). 3D Modelling All of my designs are done in 3D. I’ll even create precise 3D model from your 2D drawing and vise versa. 4). FEA and CFD Analysis In order to guarantee the correct functionality of the product in real life you need virtual testing using state of the art technology. Area of expertise : Mechanical Stress Analysis, Linear and Nonlinear analysis, Static and Dynamic analysis, Fatigue Analysis, Buckling Analysis, Modal Analysis, Thermal Analysis, Internal & External Flow, Laminar & Turbulent Flow, Steady state & Transient Flow, Fluid Structure Interaction, etc. I'm looking forward to working with you in the future.

A dynamic and committed professional with 16 years of experience in FEED and EPC of piping in various Oil & Gas industries, Process plants, Power plants and FGD. • Piping Stress analysis (Static and D... Read more

A dynamic and committed professional with 16 years of experience in FEED and EPC of piping in various Oil & Gas industries, Process plants, Power plants and FGD. • Piping Stress analysis (Static and Dynamic module) • Vibration assessment and mitigation for piping • Support and Hanger engineering / Modular support. • PDS / PDMS modeling

I am Rajnish Kumar with around 4 years of experience in the aeroengine gas turbine domain. I am a highly focused Structural Durability and Life Management Engineer specializing in the High-Pressure Co... Read more

I am Rajnish Kumar with around 4 years of experience in the aeroengine gas turbine domain. I am a highly focused Structural Durability and Life Management Engineer specializing in the High-Pressure Compressor (HPC) rotor for the LEAP-1B engine program. My core expertise lies in performing advanced fatigue analysis using 2D FEA and LCF, Fracture Mechanics principles to ensure component integrity and define safe service life. My responsibilities encompass the full scope of life management, including: Calculating Low Cycle Fatigue (LCF) life using mission profiles, Rainflow Counting, and Miner's Rule. Executing detailed crack initiation and crack propagation analyses to establish Serviceable Limits for critical features like the Seal Wire Groove. Developing 3D to 2D stress correlation factors to enable accurate and efficient full-mission life calculations. I have a strong foundation in Thermo-mechanical Fatigue (TMF) and Stress Concentration Factor (Kt) calculation, directly supporting the Life Management team in making critical decisions regarding non-conforming components and long-term rotor reliability.

I'm a professional and expert in 3D Modelling in SOLIDWORK, AUTOCAD, Siemens NX, CAD/CAM and Analysis in ANSYS. We can design your product using above softwares. Visit my website jagruthtech.in... Read more

I'm a professional and expert in 3D Modelling in SOLIDWORK, AUTOCAD, Siemens NX, CAD/CAM and Analysis in ANSYS. We can design your product using above softwares. Visit my website jagruthtech.in for more info. I own a Design and analysis industry in Mysore,India. we recieve 100's project from industry and do academic services also. I have employees who are expert in SOLIDWORK, AUTOCAD, Siemens NX, CAD/CAM. Even we are looking for long term cooperation thats why im bidding at less price. We Just need dimensions to start. Check out my portfolio for my recent projects on SOLIDWORK, AUTOCAD, Siemens NX, ANSYS. I have 5 years experience in 3D Modelling in SOLIDWORK, Siemens NX, AUTOCAD, CAD/CAM and ANSYS. I have expert in 3D Modelling using SOLIDWORK, Siemens NX, AUTOCAD and ANSYS on different domains like 1. Aircraft domain. 2. Automobile domain. 3. Turbo machinery. 4. Compressor and Pump. 5. On Renewable Energy, visit my portfolio to see my recent projects

FEA Simulation Specialist with 3+ years delivering high-accuracy structural analysis using ANSYS Mechanical (STATIC & DYNAMIC & EXPLICIT & OPTIMIZATION ) ANALYSIS Expert in: Static & Nonlinear Struct... Read more

FEA Simulation Specialist with 3+ years delivering high-accuracy structural analysis using ANSYS Mechanical (STATIC & DYNAMIC & EXPLICIT & OPTIMIZATION ) ANALYSIS Expert in: Static & Nonlinear Structural Analysis Explicit Dynamics (Impact, Drop Test, Crash) Modal, Harmonic & Transient Analysis Fatigue & Topology Optimization Design Validation & Failure Prediction Proven Results: Reduced weight while maintaining stiffness via topology optimization Validated tensile test (ASTM standard) with accurate stress prediction Simulated drop test with no plastic strain Deliverables: Full ANSYS model (.wbpj) Stress/Strain contours + deformation animation PDF report with mesh convergence & validation 2 free revisions Available now for fixed-price or hourly FEA projects. Starting at $20/hr. Let’s make your design stronger, lighter, and failure-proof! ⚙️

I am the director of Mechanika Ltd (www.mechanika-ltd.com) and a consultant Stress Engineer. I have solid all-round engineering ability and I am a SQEP calculation checker/signatory and calculation au... Read more

I am the director of Mechanika Ltd (www.mechanika-ltd.com) and a consultant Stress Engineer. I have solid all-round engineering ability and I am a SQEP calculation checker/signatory and calculation author. I have held stress signatory status for 8 years, whilst substantiating high integrity, safety critical equipment and structures. I can apply my expertise to metallic, polymer or composite structures and mechanisms in any industry. I have primary interests in remote handling, precision medical devices, fluidics, mechanism design, complex structures and heavy lifting equipment. I enjoy all areas of design; with specific expertise in mechanisms, traditional static and dynamic hand calculations, seismic assessment, FEA, classical mechanics on mechanisms and structures, fatigue and failure investigations and injection moulded product design. I am a good communicator and enjoy presenting to stake-holders. I am an expert user of ANSYS Workbench, RFEM/RSTAB, Solidworks and MathCAD with licenses for all of the aforementioned software. I can produce substantiation calculations to allowable stress and limit state methods and I have extensive experience in producing calculations to numerous codes – primarily BS EN 13001 (crane code), F.E.M Section I & II, Eurocodes, BS2573 parts 1 and 2, BS5950. I am a well-rounded individual with a proven track record in a number of diverse industries, including: cranes/heavy lifting equipment and mechanisms, remote handling, bulk materials handling, precision medical devices, aerospace actuators/valves, hydraulics and general consumer products. I regard analysis and mechanical design as integral entities and I offer design by substantiation services, where equipment is designed to be code compliant from it's inception. I have had several of my designs patented and I take pride in pioneering new engineering concepts and technology.

Senior Stress Engineer - Static, Dynamics, Thermal, Fatigue, Damage Tolerance, FEA I can take on any project of any size

Senior Stress Engineer - Static, Dynamics, Thermal, Fatigue, Damage Tolerance, FEA I can take on any project of any size

I have over 30 years of global experience in plant layout, piping design, piping materials, and pipe stress analysis and mechanical engineering (static-rotating-packages). I aim to leverage my extensi... Read more

I have over 30 years of global experience in plant layout, piping design, piping materials, and pipe stress analysis and mechanical engineering (static-rotating-packages). I aim to leverage my extensive engineering experience in onshore and offshore projects and my expertise in engineering services delivery to drive organizational goals with efficiency, productivity, and professionalism. I seek a dynamic, global environment fostering growth, excellence, continuous learning, and fairness, ultimately creating a long-term win-win partnership.

I have several years of experience in mechanical and structural design. Besides conducting stress and dynamic analysis I am well versed in 3D modeling and drafting.

I have several years of experience in mechanical and structural design. Besides conducting stress and dynamic analysis I am well versed in 3D modeling and drafting.