Hire the best freelance Building Code and Zoning expert designers for your company

Planning & Design Drawings - Site Plans, Floor Plans, Elevations, 3D Renderings Residential, Commercial, Industrial, & Agricultural projects. ICC Certified Building Code Specialist A.S. Degree in Ar... Read more

Planning & Design Drawings - Site Plans, Floor Plans, Elevations, 3D Renderings Residential, Commercial, Industrial, & Agricultural projects. ICC Certified Building Code Specialist A.S. Degree in Architectural Drafting Autodesk Revit Certified Professional

I am passionate for cities, architecture, urban design, and urban planning policy. My education, career choice, and personal interests all reflect this ambition. I graduated with a degree in Architec... Read more

I am passionate for cities, architecture, urban design, and urban planning policy. My education, career choice, and personal interests all reflect this ambition. I graduated with a degree in Architecture from the University Central of Venezuela

I WERE BORN FOR DRAFTING AND DESIGNING. Read more

I WERE BORN FOR DRAFTING AND DESIGNING.

Hi There, I'm a bachelor's Civil Engineer with more than five years of experience in the building and road sector. I'm an expert in Autodesk AutoCAD, REVIT, and SAP2000, Sketchup, and Lumion software... Read more

Hi There, I'm a bachelor's Civil Engineer with more than five years of experience in the building and road sector. I'm an expert in Autodesk AutoCAD, REVIT, and SAP2000, Sketchup, and Lumion software. Also, I'm an expert building designer using Eurocodes, IRC 2021 (International Residence Code - 2021), State residential codes, and Zoning code. I am willing to work with you to give a professional service with 100% satisfaction using my knowledge and experience. Thank you for visiting my profile, and I hope to hear from you soon..!

Over the past 7 years I've worked on projects including schools, churches, commercial buildings, home renovation, and healthcare facilities. Currently I assist in design and documentation of medium t... Read more

Over the past 7 years I've worked on projects including schools, churches, commercial buildings, home renovation, and healthcare facilities. Currently I assist in design and documentation of medium to large healthcare projects. I participate in all phases of design. I am looking for any architectural drafting or design projects but will also take any drafting jobs that my capabilities will allow. Small projects including built-ins, furniture design, and bathroom renovations are also welcome.

I have over 10 years experience with AutoCAD and over 4 years with SolidWorks. Read more

I have over 10 years experience with AutoCAD and over 4 years with SolidWorks.

DroiLancers harness the synergies of different engineering solutions provided some of the very talented and motivated engineers, whilst maintaining an international presence. We have proudly served a... Read more

DroiLancers harness the synergies of different engineering solutions provided some of the very talented and motivated engineers, whilst maintaining an international presence. We have proudly served a prestigious portfolio of clientele, spanning a wide range of verticals in the Public & Private sectors. DroiLancers provides solution for your automation, storage, coding, modelling and reinventing the structures of your projects. We follow a complete suite of engineering protocols and and technological services to provide you with the best possible solution for your engineering problem with consultancy, design, implementation, operations and maintenance, technical support and training. DroiLancers is a continuous evolving state touching the very fabric of technological and modern engineering solutions to acquire new competencies and in-depth knowledge in our areas of expertise.

 Highly motivated; innovative problem solver  Detail focused with solid organizational and follow-through abilities  Experienced leader adept at motivating teams to achieve goals  Work effectivel... Read more

 Highly motivated; innovative problem solver  Detail focused with solid organizational and follow-through abilities  Experienced leader adept at motivating teams to achieve goals  Work effectively as independent contributor and collaborative team member  Solid critical thinking and analytical skills  Bilingual: English and Spanish  Proficient in AutoCAD, Revit, Microsoft Office

I hold Masters of Architecture, for the past 6 years work as a senior architectural technologist and designer in Alberta, Canada. Previously for 7 years architect of commercial and hospitality buildi... Read more

I hold Masters of Architecture, for the past 6 years work as a senior architectural technologist and designer in Alberta, Canada. Previously for 7 years architect of commercial and hospitality buildings in Ukraine.

With 23 years of experience serving as a Job Captain, Contract Administrator and Production Consultant, David brings the unique talent of ensuring that design ideas are implemented into a feasible, wo... Read more

With 23 years of experience serving as a Job Captain, Contract Administrator and Production Consultant, David brings the unique talent of ensuring that design ideas are implemented into a feasible, workable set of Production Documents. He also has a strong ability to coordinate a team of Consultants and manage the needs of the team members. Project experience ranges from minor residential renovations (specializing in kitchen design) through to multi-million dollar healthcare installations and high-rise residential developments in various locations across Western Canada, California, Mexico and Costa Rica. David has a very strong background in AutoCAD. He is familiar with all forms of construction and has a particular affinity for heavy timber design and construction. As a Senior Architectural Technologist, he seeks to apply his extensive technical expertise in the Building Sciences as an independent architectural consultant in a telecommuting environment.

•18 years of experience in the architecture field •Currently preparing to write the BCIN (Building Code Identification Number) Exam •Prepared Study, Inception, Preliminary Design and Final Design Repo... Read more

•18 years of experience in the architecture field •Currently preparing to write the BCIN (Building Code Identification Number) Exam •Prepared Study, Inception, Preliminary Design and Final Design Report Good knowledge in preparing contract and construction drawings, documents for tendering process as well as construction. •Capability in preparing plinth area basis estimates for small scale projects. •Experienced in project co-ordination. •Co-ordinated and attended meetings with clients, contractors, engineers, architects for the project reviews as well as to ensure the project is completed on time and within budget. •Proficient in preparing presentations, minutes of meetings, schedules. •Familiar in coordinating with municipalities, Urban development Authorities, Fire department, Conservation department in India as well Canada •Conducted site visits to ensure compliance with building codes and zoning regulations. •Skilled set-in reading building codes, policies and design manuals, Design basis reports •Successfully coordinated with multi-disciplinary project teams, municipalities, and other public departments •Worked successfully in multi-disciplinary teams in a matrix organization. •Proficiency with a strong desire and ability to collaborate in problem solving in an integrated team environment. •Proven ability to set priorities in the project and worked in a deadline-oriented environment. •Proficient in AutoCAD, Sketch-up, Revit, PowerPoint, Photoshop, In-design, Microsoft Office software, 3DS Max, CorelDRAW, Lumion, ArchiCAD.

As a licensed PE, I provide comprehensive structural engineering, architectural design integration, and official stamp/permit services. I also deliver end-to-end solutions from conceptual design throu... Read more

As a licensed PE, I provide comprehensive structural engineering, architectural design integration, and official stamp/permit services. I also deliver end-to-end solutions from conceptual design through permit approval, supported by advanced 3D visualization capabilities. Professional Services: • Engineering Stamps(40+ states) • Permit Processing • Structural Engineering • Architectural Design • 3D Visualization • Code Compliance • Construction Documentation • Plan Review • As-Built Documentation • Zoning Analysis Technical Responsibilities: • Structural calculations and analysis • Construction document preparation • Permit application processing • Code compliance verification • As-built documentation • Design modification review • 3D visualization services • Regulatory coordination Software Proficiency: • AutoCAD • Revit Structure • SketchUp Pro • 3ds Max • Structural Analysis Software • Permit Processing Systems • Document Management • Code Analysis Tools Let's collaborate to elevate your vision from concept to reality. I'll ensure your project not only meets but exceeds expectations. Contact me today, and let's embark on a journey to success.

As a structural engineer, I have worked on many projects in the US over 8 years and have gained experience in obtaining building permits in multiple states. I have connections with many US professiona... Read more

As a structural engineer, I have worked on many projects in the US over 8 years and have gained experience in obtaining building permits in multiple states. I have connections with many US professional engineers and licensed architects and work as their team manager. Not only have I mastered the US building codes, I also find joy in solving challenging problems that get approve from building permits. Here are the states in the US where I can provide licensed architect and professional engineer reviews and stamps for building permits: Arkansas, California, Colorado, Connecticut, Delaware, Georgia, Hawaii, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New jersey, New York, Ohio, Oregon, Pennsylvania, Rhode Island, Utah, Virginia, Washington I have also worked with professional engineers in Canada and given them many jobs. The provinces where I can provide reviews and stamps of professional engineers in Canada are as follows: Alberta, British Columbia, Manitoba, Ontario, Quebec I will provide the following documents for building permit: ? 1. Cover Sheet Project information (address, parcel number, owner, designer) Sheet index Code references (CBC, zoning codes, etc.) Project summary (use, occupancy, construction type, etc.) ? 2. Architectural Plans Site plan (property lines, setbacks, driveway, structures) Floor plans (existing and proposed) Roof plan Exterior elevations Building sections Door/window schedules Interior layouts (for kitchens, baths, etc.) ? 3. Structural Plans Foundation plan Framing plans (floor/roof) Structural details and sections Structural notes and specifications Structural calculations (stamped by a licensed engineer) ? 4. Energy Compliance Documentation (Title 24 California only) Title 24 energy forms and reports CF1R documents Envelope, lighting, and mechanical compliance details ? 5. MEP Plans (if required) Mechanical (HVAC layout, equipment schedules) Electrical (lighting, receptacles, panel schedules) Plumbing (fixture layout, pipe sizing, riser diagrams) ? 6. Supporting Documents Soils/geotechnical report (if required) Survey/topo map (for new construction or additions) Truss calculations (if using prefabricated trusses) Fire sprinkler plans (if applicable) Green building checklist (e.g., CALGreen) Special inspection form (if needed) My skills: I have experience with USA Design codes for structural design and working with the help structure analysis software like Risa 3d, Ram structure, Robot structure analysis, Revit Structure, Tekla Tedds. I am confident that my background in Structural design and my passion make me a strong candidate. Thank you for visiting my profile!

Licensed Professional Engineer (PE) with expertise in Civil, Structural, Architectural, and Electrical Engineering. My team and I hold U.S. engineering licenses in 34+ states (including TX, CA, FL, NY... Read more

Licensed Professional Engineer (PE) with expertise in Civil, Structural, Architectural, and Electrical Engineering. My team and I hold U.S. engineering licenses in 34+ states (including TX, CA, FL, NY, IL, PA, OH, GA, etc.) and are well-versed in international building codes. We provide full-service engineering design, analysis, and stamped permitting documents for residential, commercial, and industrial projects. Our Core Services: 1. Civil Engineering - Site plans, grading, drainage, utility plans, land leveling. - Compliance with local zoning and environmental regulations. 2. Architectural Design - Floor plans, elevations, sections, details. - ADUs, cabins, basements, remodels, and custom homes. 3. Structural Engineering - Analysis & Design: Dead, live, wind, snow, seismic (ASCE 7), flood, and soil loads. - Foundations: Spread footings, mats, piles, piers, retaining walls. - Materials: Concrete (ACI 318), steel (AISC 360), wood (NDS), masonry (MSJC). - Software: SAP2000, ETABS, STAAD Pro, STAAD Foundation. 4. Electrical & Electronics Engineering - Embedded systems, PCB design, Arduino, MATLAB. - HVAC, plumbing, and utility coordination. 5. Drafting & 3D Modeling - Software: AutoCAD, Revit, ArchiCAD. - Shop drawings, renderings, and permit-ready documentation. - Design Codes & Compliance - Primary Codes: IBC 2018, FBC 2017, NYBC 2014, ASCE 7-16, ACI 318-14, AISC 360-10, NDS 2018. - Specialized Knowledge: Seismic design, flood zone compliance, energy codes. Why Work With Us? * 34+ State Licenses: Broad jurisdictional coverage for seamless permitting. * End-to-End Solutions: From conceptual design to stamped construction documents. * Multidisciplinary Expertise: Civil, structural, architectural, and electrical under one roof. * Fast Turnaround: Precision drafting and code-compliant calculations. Let’s collaborate! Contact me for a quote or consultation.

I am currently working as an Process Design Engineer, at Minda Furukawa Electric Pvt Ltd (MFE) after completing an undergraduate course, ‘Bachelor of Mechanical Engineering’ at Lovely Professional Uni... Read more

I am currently working as an Process Design Engineer, at Minda Furukawa Electric Pvt Ltd (MFE) after completing an undergraduate course, ‘Bachelor of Mechanical Engineering’ at Lovely Professional University, in August 2014. Impressed with my performance as a One-Year GET Programme, Minda Furukawa electric Pvt Ltd offered me a full time position. In my time here, I have completed tasks involving conceptualization of process diagrams, creating documents based solely on analysis and calculated risks; and have performed critical calculations. These tasks have made facing challenges with innovation as well as paying uncompromising attention to detail, some of the key attributes of my personality. In addition to the technical expertise I have gained from working at MFE, I have also developed my leadership skills through steering a team of nine employees to reshape the Design and Audit strategy of MFE India .

HI, I AM A CIVIL DESIGN ENGINEER AND DRAFTER I HAVE MORE THAN 5 YEARS OF EXPERIENCE AS AN ARCHITECTURAL, STRUCTURAL DESIGNER AND 3D MODELER. I AM AN EXPERT IN AUTOCAD, GOOGLE SKETCHUP, REVIT. ETC. I H... Read more

HI, I AM A CIVIL DESIGN ENGINEER AND DRAFTER I HAVE MORE THAN 5 YEARS OF EXPERIENCE AS AN ARCHITECTURAL, STRUCTURAL DESIGNER AND 3D MODELER. I AM AN EXPERT IN AUTOCAD, GOOGLE SKETCHUP, REVIT. ETC. I HAVE COMPLETED MANY DESIGN PROJECTS FROM START TO END LIKE INDIVIDUAL HOUSES, RESIDENTIAL APARTMENT BUILDINGS, COMMERCIAL COMPLEXES AND OFFICE BUILDINGS, WITH OR SOMETIMES WITHOUT A TEAM.

A highly skilled architectural designer with 5 years hands-on experience in drafting architectural schematics in blueprints, creating exterior and interior design concepts for high visibility projects... Read more

A highly skilled architectural designer with 5 years hands-on experience in drafting architectural schematics in blueprints, creating exterior and interior design concepts for high visibility projects. Skilled in leveraging ArchiCAD, Photoshop, Artlantis Studio Lumion and Enscape software to create architectural models. Strong ability to coordinate multiple teams and foster relationships with clients and vendors to promote innovative architectural and structural concepts.

I have 11 years experience working as a 3D artist and 8 years experience working as a designer of machines (CAD - drawing). Software that is mastered Autodesk AutoCad, Autodesk Inventor, Autodesk 3ds... Read more

I have 11 years experience working as a 3D artist and 8 years experience working as a designer of machines (CAD - drawing). Software that is mastered Autodesk AutoCad, Autodesk Inventor, Autodesk 3ds Max, Adobe package Photoshop, Illustrator, Flash, Dreamviewer. I am not afraid of any challenges. I'm open to any ideas.My specialization is full of visualizations and animations of different types of products.Feel free to contact.

I am working in Design field from last 10 years, During this professional carrier i am develop more than 900 project / component. Read more

I am working in Design field from last 10 years, During this professional carrier i am develop more than 900 project / component.

I'm a professional designer, experienced 3d modeler and Mechanical Engineer with a self-driven passion for Product design, Advanced Manufacturing Technology and Computer-Aided Design for Manufacturing... Read more

I'm a professional designer, experienced 3d modeler and Mechanical Engineer with a self-driven passion for Product design, Advanced Manufacturing Technology and Computer-Aided Design for Manufacturing. I am dexterous and think in terms of results and objectives to achieve assigned projects in a sustainable way with strict adherence to design standards. AREA OF SPECIALIZATION INCLUDES: ✔ Product Design ✔ Surface modeling ✔ Sculpting ✔ 3d modelling of parts and assembly design, product Rendering, Animation ✔ 2d drawing (Manufacturing drawing) ✔ Simulation of mechanical part and system (Analysis) ✔ Design for 3d printing (Additive Manufacturing) ✔ Reverse Engineering, product modification and upgrades ✔ Design Calculation and Documentation ✔ Machine Design ✔ Research and development With my good communication skills, research ability and great attention to detail, your project finds expression. Thanks.

I have about 9 years of experience in jewelry design in reputable companies in the United States, Canada, Iran and Turkey. My goal is to design innovative jewelry in complex and new designs in the wor... Read more

I have about 9 years of experience in jewelry design in reputable companies in the United States, Canada, Iran and Turkey. My goal is to design innovative jewelry in complex and new designs in the world. I am familiar with most of the jewelry styles of the world.