Hire the best freelance Autodesk Vehicle Tracking expert designers for your company

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site... Read more

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site planning, site design, roadway design, stormwater management planning and design (gray infrastructure and LID/Green infrastructure), hydrology/hydraulics, entitlements and permitting, project scheduling, cost estimating, franchise utility coordination, and construction phase services. B.S. in Civil Engineering from California Polytechnic State University, San Luis Obispo, CA Project experience in the CA, NJ, and NY markets. Proficient in the following design software programs: AutoCAD Civil 3D as well as HydraFlow Hydrographs and Vehicle Tracking extension to the program, Flowmaster, StormCAD, and ArcGIS.

I am a Civil Engineer with five years of experience in road design, having worked on projects in various countries, including Egypt, Saudi Arabia, the United Arab Emirates, Qatar, Libya, Tanzania, and... Read more

I am a Civil Engineer with five years of experience in road design, having worked on projects in various countries, including Egypt, Saudi Arabia, the United Arab Emirates, Qatar, Libya, Tanzania, and Madagascar. I have a strong passion for road and traffic design and continually strive to improve and make a positive impact in my field.

I am a Structural Engineering Technician with 11 years’ experience working in a busy engineering consultancy office. I achieved my qualifications by studying part time while working full time hours to... Read more

I am a Structural Engineering Technician with 11 years’ experience working in a busy engineering consultancy office. I achieved my qualifications by studying part time while working full time hours to completing Level 7 BEng Tech in Civil Engineering and more recently a Level 8 HDip. in BIM (Building Information Modelling) for Civil Engineering. I have worked on a range of projects which include traditional and rapid build schools (steel frame/masonry/precast concrete), residential housing and apartment developments, hospital MRI room extensions, building refurbishments. I have been responsible for providing structural general arrangement and detail drawings, detailing of rebar drawing packs & providing bent bar schedules and weights and attending site for routine inspections. • AutoCAD • Revit Structures • Rebar Detailing with the CADS RC package • Autodesk Vehicle Tracking • Good knowledge of structural aspects of buildings • Microsoft Word & Excel

I am a Civil Engineer specializing in road construction and infrastructure design, with over 13 years of professional experience. For the past 6 years, I have served as Head of Department, leading des... Read more

I am a Civil Engineer specializing in road construction and infrastructure design, with over 13 years of professional experience. For the past 6 years, I have served as Head of Department, leading design teams and overseeing complex road infrastructure projects from concept through completion. My expertise includes road design, technical project documentation, and road safety audits — an area where I bring both regulatory knowledge and practical field insight. I hold a Master's degree in Transport Engineering and a Bachelor's degree in Finance, a combination that gives me a strong edge in managing both the technical and economic aspects of infrastructure projects. I am currently available for remote project-based collaboration and am open to opportunities with international teams and organizations.

Highways and Airports Engineer with more than 6 years’ experience in design works. Involved in several projects in Egypt and Oman projects (Airports and Roads Projects). Quick Learner. Getting a valua... Read more

Highways and Airports Engineer with more than 6 years’ experience in design works. Involved in several projects in Egypt and Oman projects (Airports and Roads Projects). Quick Learner. Getting a valuable knowledge of international codes and standards. Having Good ability to handle different tasks. I have good skills on using AutoCad, Civil 3D, AutoTurn, AeroTurn, Vehicle Tracking, Infraworks, Python, C#, QGIS and Excel. I am postgraduate student at Cairo University. I have finished pre-master with GPA:3.9/4. I work on research related to Road Safety.

Professional Civil engineer with -10+ years experience in Civil design of roadways, site development and utility design for water, sewer, storm, and other utilities (electric, gas, telecommunication... Read more

Professional Civil engineer with -10+ years experience in Civil design of roadways, site development and utility design for water, sewer, storm, and other utilities (electric, gas, telecommunication) - Licensed Professional Engineer (PE) in Texas and Maryland. - Demonstrated expertise in civil engineering projects, including topographic and boundary surveys, utility conflict investigations, sewer and waterline rehabilitation, roadway widening, drainage analysis, site grading, and storm water modeling and design. - Proficient in AutoCAD, Civil3D, MS Office Suite, ArcGIS, HEC-RAS, HEC-HMS, SWMMM, Open Roads Designer, MicroStation, and Geopak. - Skilled in developing 2D & 3D CAD standards, managing survey practices, and ensuring quality assurance/quality control for civil engineering designs. - Experienced in preparing project deliverables, including plan and profile drawings, corridor modeling, earthwork calculations, utility coordination, SWPPP, accessibility plans, and traffic control plans. -Can work in roadway design and modeling projects in Civil 3d, and OpenRoads designer from field to finish - survey processing (existing topo and boundary drawing, creation of existing and ground surfaces) - design of horizontal and vertical alignment of proposed roadway, - analysis of and mitigation of drainage impacts of proposed roadway and storm water mitigation, - design and modeling of underground storm sewer network, detention pond, drainage channel and outfall design. -creation of horizontal and vertical roadway alignment and profile - corridor modeling of roadway geometry based on AASHTO design guidelines, - preparation of existing and proposed cross sections and creation of cut-fill earthwork calculations - design for proposed roadway signage and pavement stripping - create final design submittal including project phasing, temporary traffic control measures, utility coordination and relocations, design details, calculations, plan and profile sheets - Highly capable in site design for residential and commercial properties -Expertise in site modeling and permit applications for residential and commercial properties.

I provide highly accurate and production-ready CAD services, transforming concepts and sketches into professional deliverables. With 2 years of experience in Highway and Civil engineering, Architectur... Read more

I provide highly accurate and production-ready CAD services, transforming concepts and sketches into professional deliverables. With 2 years of experience in Highway and Civil engineering, Architectural drafting and design, and general computer-aided design and drafting, I guarantee precision and compliance with local and international safety and industry standards.

Graduated with a Bachelor of Engineering from the University of Belgrade, specializing in Engineering. Most recently worked as an Autocad Drafter at Archaquatics, managing projects to create technical... Read more

Graduated with a Bachelor of Engineering from the University of Belgrade, specializing in Engineering. Most recently worked as an Autocad Drafter at Archaquatics, managing projects to create technical documentation for pools and spas. Previous roles include BIM Technician and Autocad Technician, with contributions to public building projects in Canada. Experienced in construction engineering, drawing, and road traffic, with a focus on delivering precise and high-quality technical documentation. Dedicated to supporting teams and organizations in achieving accurate project outcomes through effective design and technical expertise.

Highly experience CAD user, including use of specialist software for traffic engineering and Civils 3D. Experience of feasibility and preliminary design as well as detailed design on a range of projec... Read more

Highly experience CAD user, including use of specialist software for traffic engineering and Civils 3D. Experience of feasibility and preliminary design as well as detailed design on a range of projects. Ability to visualise a completed project from technical drawings and other plans. All stages of design up to and including detailed design of parking and highway improvement schemes.

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disci... Read more

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disciplinary environments encompassing various domains, including water and sanitation, roads and stormwater, residential, commercial and industrial developments, as well as the construction industry. My proficiency in both local and interstate civil services and roads design has been honed through extensive involvement in an array of projects, which include but are not limited to, subdivisions design, geometric design, and bulk earthworks design. My expertise in engineering software programs spans a broad spectrum, encompassing 12d Model, Civil3D, AutoCAD, Caddie 18, Model/ Pipe/ Road Maker, and Autodesk extensions such as Infraworks and Vehicle Tracking.

I'm a civil engineer and Civil 3D designer with 5 years of experience in land development, stormwater, wet utilities, and road infrastructure, with projects delivered across the United States, New Zea... Read more

I'm a civil engineer and Civil 3D designer with 5 years of experience in land development, stormwater, wet utilities, and road infrastructure, with projects delivered across the United States, New Zealand, and Egypt. I currently produce full civil construction document sets for a US engineering firm: site, grading, stormwater, erosion control, and utility plans for commercial, industrial, and institutional projects in multiple states. What I deliver: • Survey and scan-to-CAD conversion: PDF/raster to clean, layered DWG/DXF at true scale • Civil 3D surfaces, grading, feature lines, and COGO points • Storm, sanitary, and pressure pipe networks; duct banks • Site, grading, drainage, and erosion control plans • Road and accessway design (layouts, vehicle tracking, maneuvering) • Stormwater design and HydroCAD modeling (detention, retention, swales) • Technical reports: drainage reports, SWPPPs, and permit review responses • Quantity take-offs and BOQs Software: AutoCAD Civil 3D, AutoCAD, InfraWorks, Navisworks, HydroCAD Standards: US state, county, and city requirements (including FDOT) and New Zealand council standards and codes of practice. What you can expect: • Clean, organized drawings on a consistent layer standard • Clear communication and quick responses • On-time delivery Available for one-time tasks and long-term collaboration. B.Sc. Civil Engineering, Suez Canal University

I am an expert in 3d modeling, digital sculpting and render, can work from fotos, sketches and scripts, as well as concept from scratch For over 8 years, i have created high-end 3d models for respec... Read more

I am an expert in 3d modeling, digital sculpting and render, can work from fotos, sketches and scripts, as well as concept from scratch For over 8 years, i have created high-end 3d models for respectfull clients such as der petersen gmbh & co.kg, holocreators, 3faktur, Scie Pro, 3d clone store, werder solutions AG, Paradigm Imageworks, Pica Grove, Prelude to a Dream and many others. Highest level of service is my priorty. - your 100% satisfaction is important for me; - ability to work in tight deadline. - i am online 7 days a week and always available in chat whenever you'll need to discuss the project; Please feel free to contact me with any questions about your project or to test my skills. Thank you!

🚀 Senior BIM Specialist with 10+ years of experience in Scan to BIM, Digital Twins, and workflow automation for international AEC projects. I specialize in point cloud processing, multi-trade BIM coo... Read more

🚀 Senior BIM Specialist with 10+ years of experience in Scan to BIM, Digital Twins, and workflow automation for international AEC projects. I specialize in point cloud processing, multi-trade BIM coordination, and Revit family development, ensuring seamless integration across disciplines. 🔹 Scan to BIM Expert: Transforming point cloud data into intelligent BIM models for industrial and commercial projects. 🔹 BIM Workflow Optimization: Developing parametric Revit families, automating workflows, and enhancing collaboration between teams. 🔹 Digital Twin & AR Integration: Implementing real-time reality capture solutions for asset management and facility monitoring. 💡 Passionate about innovation, efficiency, and collaboration, I help clients optimize their projects by leveraging the latest BIM technologies. Let's work together to turn reality into data-driven models!

Merhaba. Ben Eren Yolcu 4+yıl deneyimli, yenilikçi bir Solidworks Teknik Çizimciyim. İletişim kurabilen, fikirleri etkili bir şekilde sunan ve müşterilerime güncel prosedürlerle ilgili yardımcı olan... Read more

Merhaba. Ben Eren Yolcu 4+yıl deneyimli, yenilikçi bir Solidworks Teknik Çizimciyim. İletişim kurabilen, fikirleri etkili bir şekilde sunan ve müşterilerime güncel prosedürlerle ilgili yardımcı olan biriyim. Solidworks teknik çizim 3d modelleme Grafiker alanlarında çalıştım. 3D Cad ile modelleme ve animasyon, FEM Adobe Photoshop Cs6 Catia Solidworks Sheet Metal ve daha pek çok teknik beceri sahibiyim.

📌 "Glazing & Engineering Drafting Expert | 20+ Years of Industry Experience" *"I am a master of civil engineering with over 20 years of experience in the glazing industry. I specialize in creating d... Read more

📌 "Glazing & Engineering Drafting Expert | 20+ Years of Industry Experience" *"I am a master of civil engineering with over 20 years of experience in the glazing industry. I specialize in creating detailed shop drawings for curtain walls, storefronts, windows, doors, and metal fabrication projects. My expertise includes drafting for permitting, fabrication, and installation, ensuring compliance with industry standards such as AAMA and ASTM. I have worked with top glazing contractors, fabricators, and architects, providing fast, accurate, and production-ready drawings. Using AutoCAD, SolidWorks, and Autodesk Inventor, I transform 2D concepts into precise, professional drawings tailored to each project’s needs."* ✅ Why Choose Me? ✔ 20+ years of glazing & drafting experience ✔ Expertise in AutoCAD, SolidWorks & Autodesk Inventor ✔ Shop drawings for aluminum, glass, metal, and fabrication ✔ Compliance with industry codes & permitting standards ✔ Fast turnaround with revisions available 💬 Let’s discuss your project! Contact me for high-quality shop drawings tailored to your needs.

▪ Responsible for the execution of 3D CAD Design projects in industrial automation and metalwork ▪ Execution, inquiring and purchasing of technical drawings in 2D CAD for the production of mechanical... Read more

▪ Responsible for the execution of 3D CAD Design projects in industrial automation and metalwork ▪ Execution, inquiring and purchasing of technical drawings in 2D CAD for the production of mechanical components ▪ Preparer in CAM for component machining in CNC ▪ Sizing, inquiring and purchasing equipment for integration ▪ Responsible for the construction and Assembly of industrial equipment and structures ▪ Management and planning of projects ▪ Surveys, budgeting and project billing according to the customer's needs

Cad designer with the use of solidwork. Have done a cassava peeling machine and several others If you don't mind you can dm me to get your work done

Cad designer with the use of solidwork. Have done a cassava peeling machine and several others If you don't mind you can dm me to get your work done

My name is Ahmad. A trained Mechanical Engineer with SolidWorks and CAD design skills as well as excellent technical expertise. I have 3+ years of design expertise, specializing in solidworks, sketch... Read more

My name is Ahmad. A trained Mechanical Engineer with SolidWorks and CAD design skills as well as excellent technical expertise. I have 3+ years of design expertise, specializing in solidworks, sketch up and CAD modelling. I've done a lot of work using solidworks, sketch up, AutoCad, Key Shot, and blender. I offer 3D / 2D technical drawings, 2d Floor Plans, 3D Modelling, Product Modelling, Product Mock ups, Product animation, Product Rendering, Landscape Rendering, Architecture 3D modeling, Exterior/Interior design, and Motion Analysis.

I am a designer

I am a designer

👨‍💻💡Experienced CAD/CAM Engineer | SolidWorks Expert | Reverse Engineering | Tooling & Product Design 🔧 I’m a skilled CAD/CAM engineer with extensive experience in SolidWorks, CAM programming, to... Read more

👨‍💻💡Experienced CAD/CAM Engineer | SolidWorks Expert | Reverse Engineering | Tooling & Product Design 🔧 I’m a skilled CAD/CAM engineer with extensive experience in SolidWorks, CAM programming, tooling, and product design. Over the years, I’ve worked on a wide range of projects, from reverse engineering complex parts to creating precision tooling solutions and innovative product designs for various industries. Here’s what I can offer: SolidWorks Expertise: Detailed 3D modeling, assemblies, sheet metal design, and drafting for manufacturing. - CAM Programming: Efficient toolpath creation and optimization for CNC machining - Reverse Engineering: Converting physical objects into accurate 3D CAD models, ideal for product improvement, reproduction, or modernization. - Tooling Design: Custom tooling for plastic injection molding, jigs, fixtures, and more. - Product Design: Complete product development from concept to production, including functional prototypes and manufacturing-ready models. My goal is to deliver high-quality, precise, and timely solutions to meet your project’s unique requirements. Whether you need a complex part reverse-engineered or a new product designed from scratch, I’m ready to bring your ideas to life. 🤝 Let’s discuss how I can contribute to your project’s success!

I am 3d cad designer teacher of mech engineering drawing sketch & drawing artist robotics winner in robowar

I am 3d cad designer teacher of mech engineering drawing sketch & drawing artist robotics winner in robowar

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimiza... Read more

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimization and thoroughness.

I am an expert in exterior architectural 3d renderings. In 1997, when I was still at school, I installed 3D Studio MAX R2 on my computer. I dreamed of making my home and my street and after 3 years of... Read more

I am an expert in exterior architectural 3d renderings. In 1997, when I was still at school, I installed 3D Studio MAX R2 on my computer. I dreamed of making my home and my street and after 3 years of studying I did it! Let and not very cool :). Since then, my whole life is dedicated to 3d graphics. I am very interested in plants and experienced user Grow FX - a wonderful tool to create high-quality plant models. I will make your exterior scenes alive and interesting and fill with plants appropriate to your climate.