Hire the best freelance 2D & 3D Mechanical Drafting expert designers for your company

SUMMARY OF QUALIFICATIONS ●Assigned as Lead CAD Designer / ECM Operations at Adaptive Energy LLC. Working with a full team of 30+ to help innovate & design Solid Oxide Fuel Cell Batteries, update comp... Read more

SUMMARY OF QUALIFICATIONS ●Assigned as Lead CAD Designer / ECM Operations at Adaptive Energy LLC. Working with a full team of 30+ to help innovate & design Solid Oxide Fuel Cell Batteries, update company CAD Documents to Industry Standards, and lead our team in a positive and innovative direction within ECR/ECN meetings. ● 10+ Years Work experience with 2D/3D AutoCAD & SolidWorks; Designs including, but not limited to, Mechanical, Electrical, Fuel Cell Battery, Automotive, Carriers, Conveyors, Piping, HVAC, Structural Steel, Hanging Steel, Conveyor Platforms, Automation, Robotics, Powder Coating, etc. ● Associate degree in Computer Aided Mechanical Design (2012), 8+ Years of CAD and engineering course work, and four years of collegiate level course work experience in AutoCAD and SolidWorks. ● Was given the role of Lead Engineer/Draftsmen in past employment on several different projects and was tasked with supplying full design and install drawings for the customer, some of which included Tesla Motors, Dearborn Mid-West, Kuecker Logistics Group, Chrysler-Windsor, etc. ● Was given the role of Project Engineer in past employment and was tasked with keeping track of all job processes (material flow, project delivery time, etc.), while also designing and checking all CAD drawings that went into fabrication. ● Strong attention to detail with computer programs and drawings; adapts easily to new project concepts and innovative technology. ● Well organized and detail-oriented, with a proven ability to manage time effectively and improve workflow. ● Strength in following directions, analyzing, guaranteeing customer satisfaction, and completing tasks on time.

I have good command in 3D & modeling and Drafting. I have completed projects on Automobile plastic trim, Automobile Part Design, Part drafting and Detailing, Bridge (ROB, I-composite, Span), Via Duct... Read more

I have good command in 3D & modeling and Drafting. I have completed projects on Automobile plastic trim, Automobile Part Design, Part drafting and Detailing, Bridge (ROB, I-composite, Span), Via Duct Span, G.F.C (Engineering Drawing), Shop Floor Drawing with Bill of materials and CAD Conversion of any kind of design. I have completed my B.tech in Mechanical Engineering Field.

I'm a junior mechatronics engineer at EJUST, focusing on the mechanical field for 2+ years with different CAD software like AutoCAD, Skectchup, and Solidworks. My skillset honed my skills in mechanica... Read more

I'm a junior mechatronics engineer at EJUST, focusing on the mechanical field for 2+ years with different CAD software like AutoCAD, Skectchup, and Solidworks. My skillset honed my skills in mechanical 2D drafting, 3D modeling, simulation (Entry LVL), and rendering (Mid LVL).

Mechanical engineer, my 7 years of experience in High End Luxury industry and R&D, and especially in a developing country, gave me solid foundations and great versatility. My love for tinkering also m... Read more

Mechanical engineer, my 7 years of experience in High End Luxury industry and R&D, and especially in a developing country, gave me solid foundations and great versatility. My love for tinkering also make me the perfect candidate for small custom projects. I can handle your project, either you know what you want or we need to develop it together. * Full project management *Deliverable : 3D files (Solidworks or Generic), 2D files (DXF, PDF), 3D printing files (STL, Programs according to your machine) * English or French Additionnaly : * I offer Solidworks training * I have a 990/990 score at the TOEIC and can translate [ French-English or English-French ] your technical documents less

✅ TRACK RECORD: Top-Rated Plus Freelancer with 100% job succession ✅ EDUCATION: PhD in Mechanical Engineering ✅ PROFESSIONAL CAREER: Senior Mechanical Engineering over 14+ years of Professional exp... Read more

✅ TRACK RECORD: Top-Rated Plus Freelancer with 100% job succession ✅ EDUCATION: PhD in Mechanical Engineering ✅ PROFESSIONAL CAREER: Senior Mechanical Engineering over 14+ years of Professional experience in Maritime/Aerospace/Mechanical engineering (Practical Applications) My specialty falls in 🔰 A. MECHANICAL ENGINEERING (CFD-LES Hydrodynamics/Hydro-Acoustics & FEA, Aerodynamics & Aero-Acoustics) B. INDUSTRIAL and PRODUCT DESIGN ( DFM & A for 3D printing & Injection Molding) C. CAD (3D Modeling and 2D drawings with GD & T tolerancing )🔰 D. Technical Writing (White-paper writing, Proofreading, Editing & Literature Review) E. Design for Laser Cutting (Kerf Compensation) F: Sheet Metal (Bending Allowance) & Weldments (With no. Distortion risk & Minimum Warping) G: Modular Structures-Structural Design Calculations against Standard: AutoCAD 2D Drafting/SketchUp 3D Desings ✅ COMMUNICATION: Fluent and Top-notched technical flairs I ✅ FREEDOM THROUGH RESPONSIVENESS: Independent freelancer with Continuous Client feedback Check-in 🔰 SERVICES Under Mechanical Engineering & Aerospace Engineering🔰 ✅ Advanced computing analysis (FEA and CFD) ✅ Marine Hydrodynamics, Hydrostatic Stability & Hydro-acoustics ✅ Aerodynamics and Aeroacoustics analysis ✅ Computational Fluid Dynamics (CFD) analysis (Wind turbine blade, dynamic mesh, VAWT, Multiphase heat exchanger, Wing or airfoil, hydrofoil or fluke, surfboard, CFD wind tunnel) ✅ Grid Discretization or Meshing using Pointwise/Ansys/Turbogrid/StarCCM+ ✅ Fluid Structure Interaction (2-way FSI) ✅ Dynamic Fluid Body Interaction (DFBI) ✅ Thermal Management ✅ Heat and airflow analysis & Thermal Structure Interaction ✅Turbomachinery Components Pump, Axial fan, ducted fan, impeller, Rim Thruster, Fan sizing 🔰 Software/Tools 🔰 SolidWorks, StarCCM+, Pointwise, Ansys Fluent & CFX: Autodesk Inventor Nastran 🔰 SERVICES Within INDUSTRIAL & PRODUCT DESIGN & 3D CAD Modeling 🔰 ✅ Product Designing (3D Modeling, 2D Drawings, GD & T Tolerancing, Costing and Design Evaluation, design requirements, conceptual design development, technical, economic viability, Numerical analysis, DFM, Reverse engineering, Prototyping) ✅ Design for 3D Printing for A1 & X-1 CARBON Printer: Additive Manufacturing: Lattice Structures ✅ Design for injection molding with tolerances and injection molding instructions ✅ Design for Manufacturing and Assembly DFM & A ✅ Design and Fabrication drawings for laser Cutting ✅ Professional CAD Designing against Applicable Standards (Welding ISO 13920:1996 Class A, B,C ; Linear & Angular Tolerance ISO 2768-1:1993 Class V,C,M,F; Geometrical Tolerance ISO 2768:1993 class H,J, K. Environmental test: 810 G and 901D) ✅ Design Optimization ✅ Pressure vessel: (Reinforcement calculations of openings, Lifting lug analysis. Design of vessel supports, thickness calculation for shell under internal/external pressure, body flange calculation, tubesheet and tube calculation, nozzle calculation, lug support calculation, wind & seismic load calculation, Fatigue analysis, damage tolerance analysis, ASME SECTION VIII DIV. I & DIV. II, ED.2023. API 579-1/ASME FFS-1, IP Standards) ✅ Modular Buildings, Steel Framing, Aluminum Extrusions ✅ Structural Analysis ✅ Structural Finite Element analysis (FEA): Non-linear FEA , Structural calculations, structural integrity assessment, ✅ Structural Modeling and Detailing as per Eurocodes NF EN 1991-1-1, EN 1991-1-3, EN 1991-1-4; ICC, ACI, AISC, NDS, welded steel frame as per BS 8888 and AWS D1.1 ) 🔰 Software/Tools 🔰 SolidWorks, SAP2000, Ansys Additives, HyperWorks, Autodesk Moldflow, Autodesk NETFABB, Autodesk Fusion, Autodesk Autocad, Autodesk Inventor.

Hi. My name is Hardik Malani. I'm a mechanical engineer having more than 3 years of experience in Solidworks product and object designing. I have a bachelor's degree in mechanical engineering. I work... Read more

Hi. My name is Hardik Malani. I'm a mechanical engineer having more than 3 years of experience in Solidworks product and object designing. I have a bachelor's degree in mechanical engineering. I work as a freelance design engineer. I am a specialist in Solid Works. I have got a solidworks certificate from Dassault systems.

Hi, I'm Mariano Garcia. I am a specialist in mechanical design with more than 10 years of experience designing special machines, jigs and fixtures, special parts and devices. I'm a CNC Programmer and... Read more

Hi, I'm Mariano Garcia. I am a specialist in mechanical design with more than 10 years of experience designing special machines, jigs and fixtures, special parts and devices. I'm a CNC Programmer and i offer profesional CAM solutions. Also I have a machining workshop with cnc machines. All to make your projects come true. I want to provide innovative solutions in mechanical engineering projects and generate long-term relationships with customers.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

Parametric CAD designer and mechanical product modeler (Onshape) with a B.Sc. in Physics with Electronics. I build feature-tree-driven 3D models: sketches with geometric and dimensional constraints,... Read more

Parametric CAD designer and mechanical product modeler (Onshape) with a B.Sc. in Physics with Electronics. I build feature-tree-driven 3D models: sketches with geometric and dimensional constraints, extrusions, revolves, sweeps, lofts, fillets, chamfers, patterns, helix and threaded geometry, and multi-part designs in Part Studios. Modifying a design never means rebuilding it from scratch. I create assemblies with mates (rigid and rotational), gear and shaft fits, subassemblies, interference and fit checks, and exploded views. I produce 2D engineering drawings from 3D models (orthographic, isometric, section views, dimensions, annotations, tolerances, fits, GD&T), prepared for review and fabrication. Models export as clean STEP, STL, and OBJ files. I completed the full Onshape Learning Center curriculum: FeatureScript custom features, Onshape API automation (GET, POST, DELETE, JSON, authentication), configurations, simulation, sheet metal and frames (introductory), robotics mechanical design (chassis, drivetrain, motor mounting), collaboration, branching and merging, and version management. I also use Python (intermediate) for scripting, test harnesses, and automated validation, plus D5 Render and Blender (basic) for materials, lighting, and photorealistic stills. My fundamentals include classical mechanics, statics, stress and strain, thermal physics and heat transfer, electronics and circuits, and the setup logic behind FEA (geometry, materials, loads, constraints, boundary conditions). After 5+ years of remote work (▒▒▒▒▒▒ Top Rated, 100% Job Success, 98% quality, 100% on-time delivery, clients in the USA, UK, Canada, Australia), I also bring technical writing, CAD inspection and debugging, QA, structured error reporting, and revision records. Open to: product design, packaging, enclosures, prototyping, scan-to-CAD, design for assembly, and manufacturing-ready documentation.

I’m a Mechanical Design Engineer with experience in 3D modeling, product design, and engineering drawings using SolidWorks. I specialize in creating parts, assemblies, and technical drawings for manuf... Read more

I’m a Mechanical Design Engineer with experience in 3D modeling, product design, and engineering drawings using SolidWorks. I specialize in creating parts, assemblies, and technical drawings for manufacturing and 3D printing. I’ve worked on projects in production lines and machinery , focusing on functional and cost-effective designs. I'm reliable, detail-oriented, and always aim to deliver high-quality work that meets real-world needs.

Hello! I’m a passionate Automobile Engineer with extensive experience in CAD design. I am passionate in converting concept in 2D and 3D models that are functional and meet the requirements. I deliver... Read more

Hello! I’m a passionate Automobile Engineer with extensive experience in CAD design. I am passionate in converting concept in 2D and 3D models that are functional and meet the requirements. I deliver you high quality CAD designs, tailored designs to meet your specific requirements, whether for engineering, product development, technical drawings: Professional drawings that are ready for manufacturing, ensuring clarity and compliance with industry standards, high-quality renderings. Expertise in AutoCAD, Solidworks and CATIA

Mechanical design engineer, interested in CAD, CAM and CAE. I'm also new learner of programming with C and MATLAB. My favorite interest is in CFD and industrial design, from concept to a final manufac... Read more

Mechanical design engineer, interested in CAD, CAM and CAE. I'm also new learner of programming with C and MATLAB. My favorite interest is in CFD and industrial design, from concept to a final manufactured Product.

I am professional Design engineer with 4 year experience in design field.I can create any kind of 3d cad models,3d products,cad designs,assemblies,mechanical designs and many more. In short i am the w... Read more

I am professional Design engineer with 4 year experience in design field.I can create any kind of 3d cad models,3d products,cad designs,assemblies,mechanical designs and many more. In short i am the world of 3D. Following are the services that i can provide: 3D Part/ Assembly designs 2D detail drawings Realistic renderings for real-time visualizations Exploded and motion Animations 3D animation Product validation (Stress, strain, deformation, thermal, flow, fatigue analysis) Mechnical design Product modeling I use Solidworks,Autocad,Catia,Keyshot and many other softwares for all my work depending upon my client's requirements. Feel free to ask any questions:) Regards, Hardik makwana

I am a Mechanical Engineer graduate with knowledge on softwares like Solidworks ,Autocad and Creo. I can do Product design for the required function. My strengths were drawing reading, creative thinki... Read more

I am a Mechanical Engineer graduate with knowledge on softwares like Solidworks ,Autocad and Creo. I can do Product design for the required function. My strengths were drawing reading, creative thinking and dedication. Currently I am working as a Mechanical Design Engineer at Sun Pressing Pvt Ltd. My passion is to become a Design Engineer and I am achieving my goal.

it's clear that you're looking for a candidate that is extremely familiar with the responsibilities associated with the role and can perform successfully to the job adeptly perform above expectations... Read more

it's clear that you're looking for a candidate that is extremely familiar with the responsibilities associated with the role and can perform successfully to the job adeptly perform above expectations I iam a hard working recent college graduate(2.75 Gpa, Bachelor of Science in Architecture) from Tech. Institute of the Philippines. During the course of my academic career. I also manage to accrue nearly 19 years of work experience. I had the privilege of working for Al Dar Alarabia Architecture and Construction in a Autocadd Operator role i my full time, where i learned valuable professional skills such as Autocadd Designer. In both my academic and professional life, In have been consistently praised as detail oriented by my professor and peers. Whether working on academic extracurricular, or professional projects, I apply proven management and organizational skills, which i hope to leverage into the Autocadd Operator role at your company After reviewing my resume, I hope you will agree that i am the type of competent and competitive candidate you are looking for. I look forward to elaborating on how my specific skills and abilities will benefit your organization. Please contact me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or via email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ to arrange for a convenient meeting time.

Industrial Designer - 3D CAD Modeller, Product Designing. Educated, passionate and ambitious individual with knowledge of different designing softwares and good communication skills. I have a... Read more

Industrial Designer - 3D CAD Modeller, Product Designing. Educated, passionate and ambitious individual with knowledge of different designing softwares and good communication skills. I have a great passion for CAD designing and product designing. I have a great understanding of the steps needed to make a CAD model. I have specialized in : - 3D Modelling - 2D Drawings - Product Design - CAD Design - 3D CAD Animations

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the... Read more

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the opportunity to work with different companies which gave me the ability to learn about diverse products and manufacturing processes. Actually working with a small company in North San Diego as R&D lead mechanical engineer. In additionI am offering my services to people who are looking to make a modification to an existing product, to reverse engineer a component, generate file for 3D printing, generate drawing for quote or drawings for patent submission. I utilize 3D software from which I extract parametric drawings and files I can use to 3D print. Please don't hesitate to contact me for a quick preliminary pricing.

Mechanical Engineer with 20+ years experience in Mechanical engineering, Design and CAD. Experience in many aspects of Mechanical Design: Design Assessment, Concepts, Detail design with manufacturing... Read more

Mechanical Engineer with 20+ years experience in Mechanical engineering, Design and CAD. Experience in many aspects of Mechanical Design: Design Assessment, Concepts, Detail design with manufacturing drawings. Deep knowledge in multiple fields of manufacturing - different casting methods (sand, high pressure die casting), plastic injection molding, milling turning etc. , sheet metal fabrication, rapid prototyping - different type of 3D printing (Direct Metal Sintering, plastic printing) . Beyond Mechanical Engineering I offer reverse engineering. 3D model creation from 2D drawing, 3D scan or sketches, recreate old drawings in modern CAD system and 3D visualization, rendering. Worked for the leader automotive consulting firms I have the resources to meet your engineering, design, prototyping, and other needs.

Qualification : Professional in Product Design and Analysis. : Bachelor of engi... Read more

Qualification : Professional in Product Design and Analysis. : Bachelor of engineering (Mechanical). Marital status : Single. Father’s name : K.ANDREW VICTOR. Current Address : CSI st.Andrew's church campus, (land mark – oppt to Kakkan Park) 2nd street, poldenpuram, thoothukudi – 628001.

As a Mechanical Design Engineer, I specialize in CAD design, product development, prototyping, engineering simulation, and data analysis. I’ve been playing a part in designing mechanical components fo... Read more

As a Mechanical Design Engineer, I specialize in CAD design, product development, prototyping, engineering simulation, and data analysis. I’ve been playing a part in designing mechanical components for various products, ensuring functionality and manufacturability. My dedication to sustainable design and innovation drives my commitment to excellence in mechanical engineering.

I am an Experienced AutoCAD Drafter / Solidworks Designer, having B-Tech. Mechanical Degree with more than 15 years work experience in Mechanical Industry like Machine Shop, Structural and Piping Fabr... Read more

I am an Experienced AutoCAD Drafter / Solidworks Designer, having B-Tech. Mechanical Degree with more than 15 years work experience in Mechanical Industry like Machine Shop, Structural and Piping Fabrication Shop, Maintenance Workshop, Oil & Gas Drilling Rig Sites and Process Plants., and I have worked on a wide range of projects, from small consumer products to large industrial machines. I have knowledge and expertise in computer-aided design (CAD) and a proven track record of delivering high-quality, precision-engineered drawings and designs. With a deep understanding of mechanical systems and a commitment to excellence, I am ready to assist you in bringing your projects to life. I can help you in following ways. ✅ AutoCAD Expert for 2D/3D drawings, Plans, Layouts, Elevation, Sections & 3D Models. ✅ Mechanical CAD Drafter ( Machine Parts Drawings, Layouts , Part Lists, BOM, ) ✅ 2D/3D Product Designer ( Industrial Product and Equipment Designing ) ✅ Solidworks Designer ( 3D Modeling for Machine Parts, Assembly and Motion Study ) ✅ Plant 3D Designer ( 3D Piping, Tanks , Vessels, Plant Layout, Fire Hydrant Systems ) ✅ Sketchup Designer ( 3D Modeling and Product Rendering with VRAY, ) ✅ CAD Digitalizer ( Conversion of PDFs, Hand Sketches into CAD Drawings. ) ✅ 2D Floor Planner for Modern Houses, Industrial Buildings and specially for Shipping Container Designing for Residence, Office, Utility Room and warehouse.) ✅ WORK EXPERIENCE & CAD SKILLS: I am proficient in AutoCAD, Solidworks, Sketchup and other CAD software. My areas of expertise are Mechanical drafting, Machine Parts 2D /3D Drawings, 3D Modeling, Parts Manufacturing, Parts Assembling, Inspections and Maintenance. I have also experience of Shipping Container designing and renovation specially used in Oil and Gas work sites for Offices, Residences, Utility Rooms, Stores and warehouses ✅ Architectural Floor Plans Designing: I have worked 5 years as a CAD Drafter in different work sites. I have experience of 2D Drafting, Survey with Google Earth Pro, CAD Conversions, Digitalizing of old maps into CAD Drawings and 3D Modeling / Texturing work for House and Industrial Buildings. If you are looking for a CAD Drafter with a proven history of delivering top-notch designs and a deep understanding of mechanical engineering principles, I am here to help. Let's collaborate to bring your ideas to life and achieve excellence in your projects. Contact me today to discuss how we can work together to meet your CAD drafting needs. Thanks.

I’m an expert in Mechanical design solutions as well as in sand moulding, Special purpose machines. I have crossed 4 years of experience in those fields and also in oil & gas mechanical seal design wi... Read more

I’m an expert in Mechanical design solutions as well as in sand moulding, Special purpose machines. I have crossed 4 years of experience in those fields and also in oil & gas mechanical seal design with API 682 plans. Casting simulation and runner and gating system for castings analysis in Magma software. Solid works, NX CAD, Auto CAD, Click 2 cast, Keyshot tools are used for 3D modelling and simulation. Concept design, GA drawing, Proposals and DFMA feasibility are study also a part. Sheet metal design and development drawing are also prepared. Surface development and reverse engineering of a product is also a part. Top down and bottom up assembly modelling are also a part of SPM. Take a look of my portfolio for samples of my job with render models for better looks.

💫 I am a designer with core knowledge in Mechanical engineering so that I can make any types of design in machine elements and various consumer products with analysis reports. 💫 And also I have int... Read more

💫 I am a designer with core knowledge in Mechanical engineering so that I can make any types of design in machine elements and various consumer products with analysis reports. 💫 And also I have interested to make a various types of designing like logo makers, ad posters and etc., from my college days. 💫 From the beginning of my career i have interested in Product development and research so that I practice this from every products in day to day life. 💫 I hope that I will design various types of products in my career and life for current and generation in the world.

I am working as a TSE in Ansys. I am an experience of 1 year working on various designs and analyzing them through Ansys. I have also had experience designing an ATV Baja vehicle during my B.Tech. I a... Read more

I am working as a TSE in Ansys. I am an experience of 1 year working on various designs and analyzing them through Ansys. I have also had experience designing an ATV Baja vehicle during my B.Tech. I also have a design patent for a fixture to machine a multi-faced workpiece.

I am a Mechanical Design Engineer With more than ten years of experience designing and developing mechanical Designs. I have experience in fabrications and sheet metal development for automobile parts... Read more

I am a Mechanical Design Engineer With more than ten years of experience designing and developing mechanical Designs. I have experience in fabrications and sheet metal development for automobile parts. Like Radiator, Grill, Boom, Arm, Bucket for off-highway and earthmoving equipment Like Wheel loader, Excavator, Dozer, Rope shovel. I guarantee all my clients delivery of perfect design within the shortest time possible. Customer satisfaction is my motto. I am always looking for challenging jobs to expand my skillset and looking forward to jobs on ▒▒▒▒▒▒. Key Skills: 1) Product design 2)Picture or 2D to 3D design 3)2D drafting 4)Rendering 5)Generative Designing 6)Fabrications/Sheetmetal

Hello! I'm a CAD Designer with hands-on experience in mechanical drafting, 3D modeling, and steel detailing. I specialize in Autodesk Inventor, AutoCAD, and Tekla Structures, creating mechanical part... Read more

Hello! I'm a CAD Designer with hands-on experience in mechanical drafting, 3D modeling, and steel detailing. I specialize in Autodesk Inventor, AutoCAD, and Tekla Structures, creating mechanical parts, assemblies, steel structures, and detailed 2D fabrication drawings. My services include: - 3D CAD modeling of mechanical components - Mechanical assemblies and technical drawings - Steel platforms, stairs, railings, and support structures - Detailed fabrication and assembly drawings - Converting sketches and PDFs into CAD models - Technical drawings with dimensions and material specifications My experience in the metalworking industry helps me understand practical manufacturing requirements. I focus on accuracy, clear communication, and delivering organized CAD files that meet client requirements. Feel free to contact me to discuss your project!

A highly skilled mechanical engineer with more than 10 years of experience in mechanical engineering, specialising in hydro and thermal power plant mechanical maintenance. Proficient in hydro turbine,... Read more

A highly skilled mechanical engineer with more than 10 years of experience in mechanical engineering, specialising in hydro and thermal power plant mechanical maintenance. Proficient in hydro turbine, marine engine, turbocharger maintenance, and failure diagnostics. Experienced in using CAD software, including SolidWorks and AutoCAD, to design, analyse, and modify mechanical components for improved plant performance and reliability.