Die Stamp Design Freelancers for Hire

Die casting is a metal casting process in which molten metal is pressed with great pressure into a mould cavity. A mould cavity is made using two toughened steel dies. These dies would've been machined into shape, and work similar to an injection mould. Most of the die castings are made from non-ferrous metals such as copper, zinc, aluminum, magnesium, pewter, tin, and lead-based alloys. A cold or hot chamber machine will be used varying on the type of metal that is being cast.

There is a myriad of geometric characteristics to think about when making a tangential model of a die casting. These geometric characteristics include the draft, fillet, parting line. bosses, ribs, and holes or windows. 

A draft depends on how much of taper or slope is distributed to cores and any parts of the die cavity. This allows for a smooth ejection of the casting from the die. If the die cast surface is lined up with the opening direction, then this means that they require draft. The draft is put in place to ensure the right ejection of the casting from the die. A fillet is a slightly curved turning point of two different surfaces. This is because the two surfaces would have intersected at a very sharp edge or corner, fillets are added to die castings to remove corners and edges that they do not desire. 

A parting line is the point at which two sides of a mold meet. Depending on the area of the parting line determines the side of the die that will be the cover, and which is the ejector. Bosses are an addition to die castings. Their purpose is to act as a mounting point and stand-off for different that will have to be mounted. It is necessary for bosses to have the same wall thickness for the best integrity of the die casting.  Ribs are also an addition to die castings. Their purpose is to provide extra support for the designs that will need maximum strength.

When adding windows and holes to your die casting you should take some serious consideration of these characteristics. This is because they will hold on to the die steel in its process of solidification. Holes and window features are added to cancel out this affect. 

Die casting freelancers are very important to Cad Crowd and will always be appreciated for their hard work. Die cast design is an integral part of the manufacturing and product design process. We conect you directly with top-tier CAD design freelancers. Leave the hastle of online hiring aside, and work with the talented professionals on Cad Crowd. 

#367
Mohamedatya
Member Since: 2017-02-12
46 points
#600
Sid
Sid IN in Mumbai
Member Since: 2015-12-27
31 points
#1537
jdunc1148
jdunc1148 US in Murray
Member Since: 2016-04-05
10 points
#2756
Dem
Dem CN in Qingdao
Member Since: 2015-12-05
5 points
#2992
Umesh Joshi
Umesh Joshi IN in Pune
Member Since: 2016-11-27
5 points
#3328
C-nificant Engineering
C-nificant Engineering US in Saxonburg
Member Since: 2017-01-27
5 points
#6727
Fikri
Member Since: 2014-10-15
0 points
#7117
master_efix
Member Since: 2014-12-11
0 points
#13620
Prayan2017
Prayan2017 IN in Pune
Member Since: 2017-01-17
0 points
#14006
Jared Davis
Jared Davis US in Rochester
Member Since: 2017-02-19
0 points