Hire the best freelance Static Structural Analysis expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Living in a world of 3D Modelling and Engineering, always ready to take up new opportunities and challenges. Got an equal share of theoretical and practical experience in designing and fabrication.

Living in a world of 3D Modelling and Engineering, always ready to take up new opportunities and challenges. Got an equal share of theoretical and practical experience in designing and fabrication.

Naval Architect with a BS degree in Naval Architecture and Marine Engineering. Have expertise in the following areas: -ship design -stability analysis -3D hull modeling -programming -structural engine... Read more

Naval Architect with a BS degree in Naval Architecture and Marine Engineering. Have expertise in the following areas: -ship design -stability analysis -3D hull modeling -programming -structural engineering Eager to apply skills in challenging and innovative maritime projects, fostering continuous professional growth.

Summary 🚀 I’m a Mechanical & Aerospace Design Engineer specializing in EV systems, advanced CAD modeling, and high-fidelity FEA/CFD simulations. With hands-on experience at Jaguar Land Rover and a s... Read more

Summary 🚀 I’m a Mechanical & Aerospace Design Engineer specializing in EV systems, advanced CAD modeling, and high-fidelity FEA/CFD simulations. With hands-on experience at Jaguar Land Rover and a strong portfolio across automotive, aerospace, and energy systems, I bring engineering precision, modern design practices, and simulation-driven insights to every project. My approach blends product-ready CAD, robust analysis, and clear technical communication—ensuring you receive solutions that are accurate, manufacturable, and aligned with real-world engineering standards. 📂 Key Skills Organized into categories: 1. CAD Engineering ⭐3D Part & Assembly Modelling ⭐GD&T & Tolerance Stack-ups ⭐Design for Manufacturing (DFM) ⭐Sheet Metal, Plastics, Castings ⭐Complex Surface Modelling 2. CAE / Simulation ⭐Static Structural Analysis ⭐Modal & Harmonic Analysis ⭐Crash or Failure Prediction ⭐Fatigue Simulation ⭐Thermal & CFD using STAR-CCM+ ⭐J-integral / Crack Propagation 3. Automotive Expertise ⭐EDU Drive Components ⭐EV Battery Pack Layout & Thermal Analysis ⭐Harness Routing ⭐Powertrain & Chassis Components. 4. Aerospace Engineering ⭐Wing analysis, fuselage fatigue & crack propagation ⭐Stress, vibration, aerodynamic studies ⭐Lightweight structures & regulatory-aligned design 🌟 Why Work With Me ✅ Industry Experience with Global Brands Delivered engineering designs and simulations for Jaguar Land Rover and aerospace manufacturers. ✅ End-to-End Engineering Delivery From concept CAD → analysis → design optimization → documentation. ✅ Simulation-Driven Accuracy Every output is validated with FEA/CFD workflows, ensuring performance and reliability. ✅ Strong Grip on Standards ISO/GD&T, automotive/aerospace compliance, tolerance studies, DFMEA, DVP&R. ✅ Fast, Clear, and Professional Communication Technical reporting, customer-facing documentation, and agile delivery. 📌 Services I Provide ✅3D CAD modeling & detailed engineering drawings ✅FEA analysis (static, modal, fatigue, thermal) ✅CFD for aerodynamics, heat transfer & HVAC ✅Battery pack mechanical design ✅EDU/Powertrain CAD development ✅Aerospace structural & aerodynamic simulations ✅Reverse engineering, prototyping & manufacturing support ✅Technical documentation (DFMEA, DVP&R, engineering reports) 🛠️ Software Tools ANSYS | Abaqus | CFD | STAR-CCM+ CATIA V5/V6 | NX | SolidWorks | CREO | AutoCAD MATLAB | Simulink 🚀 Let’s Build Something Exceptional If you're looking for a skilled, reliable, and detail-oriented engineer who merges strong industrial experience with advanced simulation and CAD expertise, I’m ready to support your project. Let’s collaborate and turn your idea into a high-performance engineering solution. #CAD #ANSYS #CFD #FEA #EV #BatteryPack #Aerospace #MATLAB #CATIA #SolidWorks #HVAC #SimulationEngineer #3DModeling #EngineeringDesign less

CAD Designer | Mechanical Engineer | CFD & FEA Specialist Hi, I’m Habib, an undergraduate mechanical engineer with a strong command of SolidWorks, Fusion 360, and AutoCAD. I specialize in 3D CAD mod... Read more

CAD Designer | Mechanical Engineer | CFD & FEA Specialist Hi, I’m Habib, an undergraduate mechanical engineer with a strong command of SolidWorks, Fusion 360, and AutoCAD. I specialize in 3D CAD modelling, structural analysis, product design, and computational simulations (CFD & FEA). What I Offer: ✔3D CAD Modelling & Product Design: Functional & manufacturable designs for various industries. ✔ Finite Element Analysis (FEA): Stress, thermal, and vibration analysis for optimized performance. ✔ Computational Fluid Dynamics (CFD): Airflow, heat transfer, and aerodynamics simulations. ✔ Sheet Metal & Surface Modelling: Precise, industry-standard designs. ✔ Rendering & Visualization: High-quality, realistic product renders. Why Work With Me? ✅ Detail-Oriented & Reliable: Every project is handled with precision and professionalism. ✅ Fast Turnaround & Clear Communication: Get your designs on time with regular updates. ✅ Industry-Standard Tools: Expertise in SolidWorks, AutoCAD, Fusion 360, and Sim Scale. If you're looking for high-quality CAD modelling, simulation, or product design, let's connect! Let’s discuss your project today!

I have done my Bachelor of Science (Hons) degree in Mechanical Engineering from NFC Institute of Engineering and Technology Multan. I have acquired a sound overall knowledge of leading edge engineerin... Read more

I have done my Bachelor of Science (Hons) degree in Mechanical Engineering from NFC Institute of Engineering and Technology Multan. I have acquired a sound overall knowledge of leading edge engineering principles, tools, and practices, with emphasis on designing, building and testing of mechanical systems. I am proficient in the use of various automated solutions including current releases of AutoCAD and SolidWorks and some of analysis software like Ansys, DEM, and ADAMS. I have worked as a leader in semester projects. Additionally, I have been a responsible leader in organizing seminars. I have gained acceptance Letter from International Conference on Aerospace and Aerodynamic under Track “Airship Design”. Recently I have published a research titled "Conversion of IC Engine into Magnetic Engine with minor Modification" in International Journal of Science and Engineering Research. My personal attributes include leadership and sound judgment as well as creativity, analytical and troubleshooting skills. I interact productively with people from diverse backgrounds.

Ph.D., structural engineer

Ph.D., structural engineer

I am a civil and structural engineer with over a decade of cross-border experience in infrastructure development, structural design, and technical consulting for public and private sector projects. I... Read more

I am a civil and structural engineer with over a decade of cross-border experience in infrastructure development, structural design, and technical consulting for public and private sector projects. I work with research teams, engineering firms, NGOs, and real estate developers to provide expert support on projects requiring detailed structural analysis, seismic vulnerability assessments, cost estimation (BOQ), and feasibility studies. My expertise lies in delivering data-driven, code-compliant solutions to complex engineering problems, backed by a strong foundation in structural safety and cost control. I’ve led and contributed to engineering research and field implementation in Haiti, the Dominican Republic, and the United States, giving me a deep understanding of regional construction challenges and regulatory environments. 🔬 Research Interests & Ongoing Projects Seismic Performance of Educational Infrastructure in the Caribbean Assessing vulnerability and retrofitting strategies for school buildings in high-risk zones. Cost Optimization in Low-Income Urban Housing Projects Developing models for durable and affordable residential construction in tropical environments. Comparative Studies in Structural Retrofitting Techniques Evaluating the cost-effectiveness and technical efficiency of reinforcement methods for aging buildings. 🛠️ Specialized Services on Kolabtree Structural design and safety validation (residential, commercial, and public buildings) Seismic, wind, and load calculations with professional reporting BOQ preparation and construction cost estimation Retrofitting strategy development for existing structures Technical report writing, peer review, and document validation Support for grant proposals and feasibility studies Mentorship or academic support for students and researchers in civil engineering 🎓 Education & Tools Bachelor’s Degree in Civil Engineering Training in Seismic Engineering, Construction Management, and Structural Modeling Proficient with: AutoCAD, SAP2000, ETABS, Revit, Excel-based estimation tools 🌟 Why Work With Me on Kolabtree You’ll benefit from my ability to combine field experience, academic research, and technical reporting to support your project goals—whether it’s publishing a study, validating a design, or conducting a feasibility analysis. I pride myself on delivering work that is precise, timely, and aligned with international codes and standards.

I am a Design Engineer with experience in aerospace and automotive industries. CAD, modeling and product development is something I specialize in. I find enjoyment in it and coming up with design solu... Read more

I am a Design Engineer with experience in aerospace and automotive industries. CAD, modeling and product development is something I specialize in. I find enjoyment in it and coming up with design solutions for your needs. I look forward to collaborating with you.

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in... Read more

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in love to design the concept base models and is always ready to bring creativity in the design out of the way. A guy who is ready to work with company to solve not only to solve the design problems but will bring the creativity in the design through economically as well as the safety point of view. I'll provide you the complete assistance in the FEA analysis in ANSYS workbench under static structural and transient modules of the ANSYS Workbench. I have done FEA analysis on the Cantilever beam under 6 DOF and also on springs for there responses as well as the fundamental frequencies associated with them and also available to do FEA analysis anytime you need me. I have done the FEA of the Spar Design of the Airplane with the beam, jigs and ribs i have lot of work and i can share it as well with the right person.

-Senior Structural Design Analysis: Design & Audit Structural Documents & Drawing Apply Green Building's System for Projects. Coordination with the Permit Section in Building Dept for Approving -M... Read more

-Senior Structural Design Analysis: Design & Audit Structural Documents & Drawing Apply Green Building's System for Projects. Coordination with the Permit Section in Building Dept for Approving -Monitoring :(monitoring & Auditing DM Projects Management & Checking the Timing Schedule Projects with Consultant and Contractor as per plans ( MS projects) . in the Office of Planning and Development (ISO, ARIS, TQM,Visio Annual Plan budget for Projects). (Major Coordinator with Fina,DSC, Civil defense & Coastguard in Dubai Sport Complex) -Training :( Value Eng,Project Management, Project Rick Management, MS project,Support Skills & Awareness campaign for the security of information) - Apply to be LEED Member Green Building's System. Major Projects Designed & Audit : - Al Fahidi Market: ( Audit & Checking Structural Analysis Drawings - Calculations /Documents/BOQs/ Specifications) before Tendering with the Consultant & Final Approval. - Transport & Rescue Department Buildings Complex for Dubai Police:( Audit & Checking Structural Analysis Drawings - Calculations /Documents/BOQs/ Specifications) beforeTendering with the Consultant & Final Approval. -Personal Status Court:( Audit & Checking Structural Analysis Drawings - Calculations /Documents/BOQs/ Specifications) before Tendering with the Consultant & Final Approval. -Fire Test Laboratory (In-House Project):(Designed Structural Analysis with Final Approval. -Trucks Market and Auto Spare Parts Scrap (In-House Project):(Designed Structural Analysis with Final Approval. -Laber Accommodation in Al Warasn-AL Habab-Al Yessily (In-House Projects):(Designed Structural Analysis with Final Approval. -Villas in Nad ALSheba (In-House Project):(Designed Structural Analysis with Final Approval. -Mamzar Mosque (In-House Project):(Designed Structural Analysis with Final Approval.

Started as an NC operator and later programmer of 3 axis milling machining centers during my years at the faculty. Besides that, I also started with 3D design and prototyping (NC skills helped for a b... Read more

Started as an NC operator and later programmer of 3 axis milling machining centers during my years at the faculty. Besides that, I also started with 3D design and prototyping (NC skills helped for a better and efficient 3D models) just for a hobby which later turned out as a professional full-time job. Since every "from the ground up" prototype needs a simulation and a final 3D render picture both skills became the part of my everyday work. Expert in the electronic packaging design field together with cooling design.

Experienced Civil & Structural Engineer with a strong background in structural analysis, construction project management, performance analysis, and renewable energy systems. I bring a unique blend of... Read more

Experienced Civil & Structural Engineer with a strong background in structural analysis, construction project management, performance analysis, and renewable energy systems. I bring a unique blend of practical engineering knowledge and academic research excellence, including published work on KPI frameworks and fuzzy decision-making in project evaluation. With hands-on experience in: Structural design and analysis AutoCAD, Revit, and BIM modeling Solar panel structure design and installation Quantity surveying and estimation Construction scheduling, managing, budgeting etc. Primavera P6, MS Project for project management I am also a founder of a renewable energy startup focused on delivering cost-effective solar solutions in Bangladesh. My work is driven by precision, sustainability, and continuous improvement.

I’m a Certified SolidWorks Professional (CSWP) and experienced New Product Development (NPD) Design Engineer with over 7 years of expertise in mechanical 3D design, CAD modeling, and technical draftin... Read more

I’m a Certified SolidWorks Professional (CSWP) and experienced New Product Development (NPD) Design Engineer with over 7 years of expertise in mechanical 3D design, CAD modeling, and technical drafting for manufacturing. I specialize in SolidWorks, but I also work proficiently with Solid Edge, Autodesk Inventor, and AutoCAD. My work consistently meets international design standards including ISO 9001, Additionally, I have hands-on experience working with Italian engineering drawings, My core competencies include: 3D CAD Modeling – Parts & Assemblies (SolidWorks, Inventor, Solid Edge) Manufacturing-ready 2D Drafting as per ISO (India) and UNI/ISO (Italy) standards Geometric Dimensioning & Tolerancing (GD&T) BOM creation, exploded views, section/detail drawings Static Structural Analysis & Load Simulations (FEA) Drawing outputs in DWG, DXF, PDF, STL, STEP, IGES formats I’m committed to delivering clean, accurate, and production-ready CAD documentation that meets international standards and reduces shop-floor confusion. ✅ Detail-oriented, fast turnaround, and responsive communication ✅ Available for both short-term tasks and long-term collaborations ✅ Can provide a quick sample drawing or review before project approval

1. Aeronautical Engineering: Fluid Mechanics, Aerodynamics, Propulsion, Aero-Structures, Computational Fluid Dynamics. 2. Analysis Tools: ANSYS (Static Structural Analysis, Fluent Analysis), CAD. 3. D... Read more

1. Aeronautical Engineering: Fluid Mechanics, Aerodynamics, Propulsion, Aero-Structures, Computational Fluid Dynamics. 2. Analysis Tools: ANSYS (Static Structural Analysis, Fluent Analysis), CAD. 3. Design Software: CATIA.

I am a Mechanical Engineering Graduate with adept skills in CAD & CAE softwares. I am good at a number of softwares. Softwares that I have in my PC at present and the skills and project experiences re... Read more

I am a Mechanical Engineering Graduate with adept skills in CAD & CAE softwares. I am good at a number of softwares. Softwares that I have in my PC at present and the skills and project experiences related are as follows: SolidWorks 2016:- - Completed a Product Design Diploma. - Reverse Engineered a 6-axis Manipulator. - Developed Kinematic Motion for the Manipulator. - Key skills: Sketch, Part Modelling, Assembly Modelling, Sheet Metal Design, Surface Modelling, Rendering, Reverse Engineering, Motion Analysis, Drafting, GD&T. CATIA V5:- - Successfully completed a certification course. - Designed a 6-axis Manipulator. - Key skills: Part Modelling, Assembly Modelling, Sketch, DMU Kinematics, Ergonomic Design, Rendering, Drafting, GD&T. ANSYS:- - Have version 12.0 and 16.0. - Imported data to Material Library for three new Composites. - Created Static Structural analysis for the three materials for comparative study. - Capable of working with Static Structural and Transient Structural platforms of ANSYS Workbench.

I'm a Mechanical Design Engineer with hands-on experience in CAD modeling, product development, and prototyping. Currently working as a Project Research Assistant at IIT Bombay, I specialize in design... Read more

I'm a Mechanical Design Engineer with hands-on experience in CAD modeling, product development, and prototyping. Currently working as a Project Research Assistant at IIT Bombay, I specialize in designing innovative mechanical systems and integrating them with IoT and automation technologies. I bring strong proficiency in tools like SolidWorks, Fusion 360, and AutoCAD, and have worked on everything from concept sketches to detailed 3D models, assemblies, and manufacturing-ready drawings. My approach is user-focused, detail-driven, and optimized for real-world production. Whether you're looking for a custom product design, mechanical part optimization, or a smart device enclosure, I’m here to deliver efficient, field-tested solutions tailored to your needs. Let’s bring your idea to life — with precision and creativity.

Motivated Mechanical Engineering student with strong technical and analytical skills, seeking internship/full-time opportunities. Skilled in AutoCAD, Creo, ANSYS, and Fusion 360, with hands-on project... Read more

Motivated Mechanical Engineering student with strong technical and analytical skills, seeking internship/full-time opportunities. Skilled in AutoCAD, Creo, ANSYS, and Fusion 360, with hands-on project experience and a published patent in renewable energy solutions. Passionate about sustainable innovation, and applying engineering principles in real-world problem-solving.

Creativity and innovation: Ability to design innovative solutions and optimise mechanical systems. Teamwork: Experience collaborating with multidisciplinary teams to achieve common goals. Problem solv... Read more

Creativity and innovation: Ability to design innovative solutions and optimise mechanical systems. Teamwork: Experience collaborating with multidisciplinary teams to achieve common goals. Problem solving: Ability to analyse and solve complex technical problems, applying engineering principles and critical thinking. Adaptability: Flexibility to work in different environments and adapt to new technologies or methodologies. Mechanical design: Proficiency in CAD tools (such as SolidWorks, AutoCAD, PLANT 3D, AUTOPIPE VESSEL, etc) to create technical models and drawings. Structural and thermal analysis: Experience in simulations and analysis using software such as ANSYS. Manufacturing and processes: Knowledge of manufacturing processes such as machining, casting and welding. Materials knowledge: Understanding of material properties and their selection for specific applications. Project management: Ability to plan, execute and supervise projects, meeting deadlines and budgets. Machine design and optimisation, both special equipment and serialised equipment: Development of components or mechanical systems that improved efficiency or reduced costs in previous projects. Reduction of production times: Implementation of improvements in manufacturing processes that increased productivity.

I'm interested in 3D CAD, FEA analysis and CFD modeling and analysis works. My strengths are mostly in my focused areas such as FEA of product designs, design recommendations and CFD modeling in Ansy... Read more

I'm interested in 3D CAD, FEA analysis and CFD modeling and analysis works. My strengths are mostly in my focused areas such as FEA of product designs, design recommendations and CFD modeling in Ansys fluent, and static structural Analysis in ansys mechanical. Some of my keyworks are related in CAD modeling in heavy equipment designs such as JCB cranes, mining buckets and as well transient analysis of noise generation in compressor blades in Ansys fluent.

I am MSc in structural engineering.I've worked about 5 years in the design of steel and concrete structures.

I am MSc in structural engineering.I've worked about 5 years in the design of steel and concrete structures.

Initiative Collaborative Team player attitude Structured, systematic and analytic approach Communication Skills Goal oriented

Initiative Collaborative Team player attitude Structured, systematic and analytic approach Communication Skills Goal oriented

I am civil/structural engineer. Finished Vilnius Gediminas Technical University in Vilnius in Lithuania 2007. Working with static analysis, drafting and design since 2006. During this time have worked... Read more

I am civil/structural engineer. Finished Vilnius Gediminas Technical University in Vilnius in Lithuania 2007. Working with static analysis, drafting and design since 2006. During this time have worked with many different international and local projects. Have experience in design sky scrapers, hotels, schools, shopping centers, warehouses and rehabilitation projects.

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

I am Shivam Jha pursuing BE in Mechanical Engineering at Sinhgad Academy of Engineering Pune Affiliated to Pune University. I am in final year of engineering securing 8.824 CGPA aggregate pointer & al... Read more

I am Shivam Jha pursuing BE in Mechanical Engineering at Sinhgad Academy of Engineering Pune Affiliated to Pune University. I am in final year of engineering securing 8.824 CGPA aggregate pointer & also been a part of formula student car team where we design & manufacture the formula Student car for events such as Formula Bharat, SAEINDIA SUPRA, FFS, FSG, FSJ & many more. My job there is the CAE & CHASSIS HEAD. I also won Award for CAE in SAEINDIA SUPRA 2019. I had been experiencing production & Design in the same team since three years. Also done certified courses of Ansys workbench, CatiaV5, Matlab Onramp, Simulink Onramp & Digital Marketing. Work experience as an intern in Textile Industries, Indian Railways, Cement Production Plant, Mechanical Design Forum, Solar Startup & Thermal Power Project Rajasthan. Published research paper on "Design and Analysis of a Sprocket-Hub Assembly Design" & "Analysis of Hydrogen Free Piston Linear Generator" in IJRESM. Also published research paper on “Design and Analysis of Point Absorber Wave Energy Converter” & “Design and Analysis of Snake like Robot”. Key Skills:  Cadd modelling : Surfacing, Drafting, Steelmetal Modeling, Wireframe Modeling, Ergonomic Modeling & Analysis, Cadd Assembly, Cad Rendering, Cad Model Assembly Rendered Animations.  Cadd Analysis : Model Analysis, All Meshing Types, Static Structural Analysis, Static Thermal Analysis, Transient Thermal Analysis, CFD, CFX, Explicit Dynamic Analysis, Transverse & non Transverse Analysis, Non Linear & Linear Analysis, Vertical Testing Validations. Software Expertise - AutoCAD, Catia V5, Ansys workbench / Apdl, Matlab & simulink, Creo. Publications: https://issuu.com/jha1880/docs/cae_design_report_shivam_20jha_modified/s/10571423 https://www.ijresm.com/articles/design-and-analysis-of-a-sprocket-hub-assembly/ https://www.ijresm.com/articles/design-and-analysis-of-hydrogen-free-piston-linear-generator/ http://shabdbooks.com/gallery/spl-293.pdf http://shabdbooks.com/gallery/spl-292.pdf Work Samples : Link of CFD Sample Work - https://drive.google.com/drive/folders/1tkOmYdMwaKJ8GPIagbGWbADgJuZ9lCI0?usp=sharing Catia & AutoCAD Sample Link - https://drive.google.com/drive/folders/1XcY69Dh-Pjow4o38VW0XutRlbii7c_Ij?usp=sharing

I am a civil engineer who found his true passion in both steel and concrete design. I have a wide experience with all the CSI programs (SAP2000, SAFE, ETABS and CSI Column) and Autodesk programs (Aut... Read more

I am a civil engineer who found his true passion in both steel and concrete design. I have a wide experience with all the CSI programs (SAP2000, SAFE, ETABS and CSI Column) and Autodesk programs (AutoCAD, Revit structure). I have a very good command of both written and spoken English, and German. I am currently a BIM Structural Design Engineer at IAS Engineering Consultant Office, Kuwait that enjoys technology, designing with the European, American and Egyptian codes of practice. I am a very active participant when it comes to teamwork tasks. Excellent level of interpreting written documents and instructions. Easy understanding of procedures, rules and regulations, quick learner, great ability to work well with the public on a constant basis under stressful conditions. I established a Student Activity last till now in my Faculty that aims to keep students in track and focus how to learn new programs and become genius structural designers. I have a website (Advanced Designers) that collects all the Structural Engineer needs from all over the world to help him/her update him/herself to be more intelligent. My vision is to help in creating beautiful world by designing awesome and environment friendly buildings. I use my knowledge to help the others from undergraduate students in Civil and Architecture by giving them chance to learn how to express their ideas in software to make it easy to communicate with other engineers all over the world. I have Experience in Design and produce the Tender Drawings, Fabrication Drawings, and Calculation sheets according to various Design Codes to cover the clients needs and local authorities.

I have completed Masters in Naval Architecture and Ocean Engineering & Bachelors in Mechanical Engineering. During my course work, i had worked in following projects: 1. Project Title: Design o... Read more

I have completed Masters in Naval Architecture and Ocean Engineering & Bachelors in Mechanical Engineering. During my course work, i had worked in following projects: 1. Project Title: Design of ballast & trimming systems for a manned submersible of 6000m depth Company: National Institute of Ocean Technology, Chennai Role & Responsibilities: Project Trainee • Calculating preliminary estimation of capacity of ballast of the submersible. • Fixing diameter of the ballast tank. • Structural calculations by following rules laid by ASME BPVC & DNV GL for different materials. • Design of the ballast tank with the help of CATIA V5 including nozzle opening configurations. • Static Structural Analysis of the designed tank in Ansys Workbench interface. • Studying the hydraulic circuit involved for the ballasting and de-ballasting operation in an underwater vehicle. • Numerical calculations involved in time of filling the tank and flow rate. • Design of hydraulic circuit & optimizing the flow in the circuit with the help of MATLAB Simulink. • Fixing the parameters used in the hydraulic circuit. 2. Project Title: Preliminary design of 150,000 dwt crude oil tanker Company: Indian Maritime University, Visakhapatnam (Course Work) Role & Responsibilities: Project trainee • Preliminary estimation of dimensions of the vessel with the help of past vessel’s data. • Weight, capacity, resistance, rudder, hull resonance & scantling calculations are done. • Primary curves are drawn from Sectional Area Curve. • With the help of the curves, three dimensional model is designed in Bentley Maxsurf. • General Arrangement of the 150,000 dwt crude oil tanker is designed. 3. Project Title: Fabrication of four wheel steering system with seven gears. Company: Course Work Description: Fabricated a model on the concept of zero turning radius mode, with the help of seven spur gear mechanism. 4. Project Title: Maintenance Works & repairs for four wheelers Company: Police Transport Organization, Andhra Pradesh Role: Intern