Hire the best RCC Concrete Design experts for your company

I am a reinforced concrete consultant. With over 27 years experience in the field. I have worked on Small residential projects, helping both the contractor and home owner with their projects. Making t... Read more

I am a reinforced concrete consultant. With over 27 years experience in the field. I have worked on Small residential projects, helping both the contractor and home owner with their projects. Making them safe and economical. I have worked on large industrial projects for the likes of SABMiller, Acelor MITAll, LDA Lubango. Both local to area residential and international in countries like Nigeria and Angola. Dealing with all aspects of the project at hand, from liaising with equipment suppliers in Germany, to negotiating and supplying design details with steel suppliers in India. I have the experience and knowledge to get your RCC design work done expediently, safely on time.

I am a 6 years experienced structural engineer having with the expert draftsman team. We are working with 60% steel structure project and 40% other. We are working in many codes as per requirements. W... Read more

I am a 6 years experienced structural engineer having with the expert draftsman team. We are working with 60% steel structure project and 40% other. We are working in many codes as per requirements. We always working in our drafting pattern and sometimes as per client's pattern. Making higher quality of drawing which presenting on site beautiful and easy to understand.

I am B.E.civil,M.tech structure,I have 4 years experience in the fields 2D plan,3D modelling,RCC design. Read more

I am B.E.civil,M.tech structure,I have 4 years experience in the fields 2D plan,3D modelling,RCC design.

Eng. Islam Saudi is a Structural Engineer with about 11 years of experience in design of projects including underground metro, water and wastewater plants,high rise buildings,repairing of structures a... Read more

Eng. Islam Saudi is a Structural Engineer with about 11 years of experience in design of projects including underground metro, water and wastewater plants,high rise buildings,repairing of structures and precast building. Eng. Islam gained great experience in the analysis and design of RC structures practicing various worldwide building codes including the ACI, BS Codes of Practice, Eurocode and Egyptian Code (ECP), Eng. Islam gained great experience in following programs - PLAXIS; Finite Element Code for Soil and Rock Analysis including the retaining structural elements. - SAP 2000; Structural Analysis Program. - SAFE; Slab Analysis by the Finite Element Method - ETABS; Extended 3D Analysis of Building systems - PROKON, PCA-COL - CONCISE BEAM, Analysis and design of precast prestressed elements (beams,HCS) - Microsoft office; MS Excel, MS Word, MS Power Point. - AutoCAD - Revite structure -Concise Beam

Hi, I have an expert team of designer. We are providing the following services. Structural Engineering Civil Engineering Structural Analysis Structural Steel Steel Detailing PEB Shed design... Read more

Hi, I have an expert team of designer. We are providing the following services. Structural Engineering Civil Engineering Structural Analysis Structural Steel Steel Detailing PEB Shed design Pre-Engineered Steel Buildings AutoCAD STAADpro Etabs SAFE Tekla Structures Autodesk Advance Steel High-rise Buildings RCC design Reinforced Concrete Project Management Revit MEP BIM (Building Information Modelling) Architecture Interior Design 3D Modelling Rebar detailing MEP HVAC Electrical Design

• More than Ten years overall experience in RCC shop drawings, preparation of architecture & structure drawings of Bungalows, Multi-storey and High rise buildings, Electrical Substations, Water Tanks... Read more

• More than Ten years overall experience in RCC shop drawings, preparation of architecture & structure drawings of Bungalows, Multi-storey and High rise buildings, Electrical Substations, Water Tanks, Commercial plazas, Factory buildings & Shopping centers. • More than 5 years experience of working on International projects, especially in Middle East & United Kingdom. • Well familiar with international standards, capable of producing high quality detailed shop drawings for almost any reinforced concrete structure. • Excellent command of AUTOCAD software. • Hard working & dedicated.

CURRICULAM VITAE VIJAYAGOPAL. P Civil & Structural CADD Engineer. ?:+919676486020 E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ To put myself in a globally reputed organization which motivates me by providin... Read more

CURRICULAM VITAE VIJAYAGOPAL. P Civil & Structural CADD Engineer. ?:+919676486020 E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ To put myself in a globally reputed organization which motivates me by providing excellent opportunities and suitable environment where, I can apply my knowledge and skills, and to be a valuable asset in organization I work with to yield - both benefits of the job satisfaction as well as a steady-paced professional growth. PROFILE SUMMARY • A result oriented professional with more than 12.00 years of experience in complex structural drawings and detailing as well as on-site construction activities to ensure completion of project within the time & cost parameters and effective resource utilization to maximize the output • Adroit at swiftly ramping-up projects with competent cross-functional skills and ensuring on time deliverables • Acquired extensive experience of: • RCC Structures including preparation of Framing Layouts/General arrangement drawings, As-built drawings • Detailed Drawings For Raft Foundation, Columns, Beams, Slabs, Retaining Walls, Diaphragm Walls, Piles, Pile Caps, and Details Of Precast Columns, Precast Panels, Precast Slabs, Beams, Geotechnical Instrumentation Drawings & Calculation And Quantity Of Steels for reinforced Concrete and Bar Bending Schedule • Execute all type of R.C.C Drawings, mainly structural & various types of works, such as include drafting, checking, & preparing bar bending schedule with steel quantity using Base Of AutoCAD 2000 – 20016. EMPLOYMENT HISTORY Sr. CADD Engineer (Structures) September 2014 – August 2016 ArRiyadh New Mobility, CWG Group (Salini Impregilo, L&T & Nesma) at Riyadh. Project: ArRiyadh New Mobility (ANM) has been awarded a contract to design and build Line 3 which is the longest line at 41.2 km. Line 3 features 22 stations, including the Main Stations “Qasr Al-Hokm” and “Western”, 10.4 km of Bored and mined tunnel and 26.7 km of viaduct with maintenance depots at the west and east extremities. Client: ArRiyadh Development Authority (ADA) Responsabilités: • Preparation/review of span arrangement drawings for viaduct of various locations considering all aspects of site requirements for Line – 3. • Preparation of fabrication detail of Rebar jig for central pier segment of Continuous Span. Fabrication detailing of Rebar jig of center segment and expansion joint segment of Station Span. • Preparation of Erection scheme of launching girder for Straight and Curved spans. • Preparation of Bearing Installation & Bearing Pockets for all Spans. • Preparation of casting coordinates of segmental Box Girder for Casting yard purpose and giving global execution co-ordinates for all piers and spans (segments of box girder). • Preparation of Footing & Pier coordinates for Site and giving global co-ordinates for all piers and spans. • Preparation of numeration drawing for substructure and superstructure for viaduct and Station. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation for all type of Reinforcement drawings for substructure and superstructure for viaduct and Station. Sr. CAD Engineer (Structures) July 2011 – September 2014 PARSONS BRINCKERHOFF INDIA PVT.LTD, CHENNAI & HYDERABAD. Position: Engineering Consultant (Rail & Transit) Project : Chennai Metro Rail Client : GAMMON - MOSMETROSTROY JV Responsabilités: • Chennai Metro Rail Limited – CMRL UAA – 02 & UAA – 03 (Corridor – 2) Projects Consisting the Railway stations from Saidapet to Government Estate. • Worked on Detailed Design of Chennai Metro Rail Project Corridor-2. Responsable for the Preparations detailed structural drawings for entities of the underground stations like tunnel Drawings Diaphragm wall drawings and sections. Preparation of D-wall Reinforcement details and also concourse Slab, roof Reinforcement Detail Drawings and also my Process involves in preparing the project related Drawings with the specifications given by the Design team and developing drawings for the client. Responsabilités: • Preparation of span arrangements drawings for viaduct of various locations considering all aspects of site requirements for Corridor - 1 (Miyapur P.O.B to L.B Nagar P.O.E). • Preparation of numeration drawing for substructure and superstructure for viaduct and Station. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation for all type of Reinforcement drawings for substructure and superstructure for viaduct and Station. • Preparation of numeration drawing for substructure and superstructure for Cantilever Pier, Portal Pier and Obligatory Span Viaduct. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation of casting coordinates of segmental Box Girder for Casting yard purpose and giving global co-ordinates for all piers and spans (segments of box girder). • Preparation of Reinforcement drawings for Prestressed Concrete (PSC) Superstructure like segmental Box girders and substructure drawings of piers, pier caps, footing and Piles and pile caps. • Specialized In Cable Profiling Of Prestressed Box-Type Girders As Directed By Design Engineer. • Preparation of Bar Bending Schedules and Calculation of Quantities As Directed By Design Team. • Preparation of Pier Schedule for Viaduct and Station Piers. Co-Ordinates for Viaduct and Station Piers Foundation, Pedestal, Pier, Pier Cap & Bearing Pedestal. • Preparation of Seismic Arrestor for Viaduct and Station Piers. Details of Bearing Pedestal Numeration Details Viaduct and Stations. • Preparation of Shear Key Details for Superstructure for Viaduct and Station Piers. • CAD ENGINEER (Alignment) January 2011 – June 2011 FEEDBACK INFRASTRUCTURES Pvt. Ltd, HYDERABAD. Position: Engineering Consultant (Rail & Transit) Project : Hyderabad Metro Rail Limited, Client : L&T Metro Rail Ltd Responsabilités: • Assist Alignment Expert in design of Track Alignment (Horizontal & Vertical) for 3 Corridors (Total 72 kms) of Hyderabad metro Project using Bentley Rail Track and AutoCAD. • Drafting of Alignment 3 Corridors of Hyderabad metro Project based on design of Horizontal & Vertical. • Preparation of Cross Sections for all 3 Corridors of Hyderabad Metro Rail Project. • Assist in fixing of Turnouts and Crossovers along the proposed Corridors of Hyderabad Metro Rail Project. • Preparation of Power Supply Scheme Drawings for Hyderabad Metro Rail Project. • Designing / Preparation of Track Layout Plans for 3 Railway Depot Layouts of Hyderabad Metro Rail Project. • Setting of drafting standard and specifications for Hyderabad Metro Rail Project • Preparing the project related drawings with the specifications given by the Design team and developing drawings for the client. CADD Engineer (Bridge Structures) January 2010 – December 2010 EGIS INDIA CONSULTING ENGINEERS Pvt. Ltd, HYDERABAD. Position: Engineering Consultant (National Highways and Rail & Transit) Project : Chennai – Bangalore to Chennai Expressway Client – National Highway Authority of India Responsibilities: Preparation of GAD’s, which includes plans and sections of the structures, Highway Alignment, Strip Plans, Layouts, Reinforcement drawings as specified by the Design team. And also my Process involves in preparing the project related drawings with the specifications given by the Design team and developing drawings for the Client. Preparation of traffic engineering drawings as directed by design team. Civil Draughtsman (Building Structures) December 2007 – December2009 SAR PRO CONSULTING ENGINEERS, BANGALORE. Position : Engineering Consultant (Residential Apartment, Commercial complexes, Colleges & Industrial Buildings) Scope of Work : 2- 5 Floors Apartment, 2- Industrial Buildings, and 3-Engineering colleges. Responsibilities: Preparation of Structural drawings. Thorough knowledge of AutoCAD since 2004.Expert in CAD work for Structural detailing of residential buildings, commercial and industrial structures. I was worked on many type of Foundation Dwg. Like Raft-Foundation, Retaining Wall Detail, Lift-Pit Foundation Detail, etc. Efficiently led the team of STRUCTURAL DRAUGHTSMAN by visualizing the project requirements and capable of managing all crises to match the dead line. Good interpersonal skills to coordinate technical aspects within the team and with Architectural and other disciplines. Structural Draughtsman (Building Structures) October2004 to November 2007 SEMAC CONSULTING Pvt. Ltd AT BANGALORE. Position : Engineering Consultant Scope of Work : 3-Industrial, and 3-Public Buildings. STRENGTHS Aptitude to increase knowledge through continuous learning & Hardworking, Maintaining good relations with a friendly attitude, dedication towards a task once confided to complete with sincerity, punctuality and hard work. ACADEMIC CREDENTIALS ------------------------------------- • AMICE Civil Engineering - 2015 By Board of Technical Education. (fromInstitution of Civil Engineers India) PERSONAL DETAILS Father’s Name: Srinivasulu P. Date of birth: 25th December 1981 Current Address: #5, Ground Floor, 12th main, 14th cross, Wilson Garden, Bangalore – ▒▒▒▒▒▒▒, Karnataka. Permanent Address : #26/831-3, Bangaraiah Kottal, Mittamadi, Proddatur, Kadapa (Dist) Andhra Pradesh-516360 Passport Details : No. N4670605 (Date of Issue: 12-NOV-2015 to Date of Expire: 11-NOV-2025). Gender: Male. Marital Status: Single. Number of Dependents: 4. Languages Known: Hindi, English, Kannada, Tamil. Software Skills : Autocad 2000-16, MS Office, BIM - Revit 2012 & 2014, ArmaCAD V8 & Bentley rail (Basic) AFFIRMATION Date: Place: VIJAYAGOPAL.P

Experienced and Dynamic Structural Engineer with a proven track record of ensuring that structures are architecturally safe and compliant with codes. Experienced in providing services for both residen... Read more

Experienced and Dynamic Structural Engineer with a proven track record of ensuring that structures are architecturally safe and compliant with codes. Experienced in providing services for both residential and commercial projects. Experience in work: RCC and Steel analysis and design. Design of Street light pole, Traffic gantries, Sign board, billboard of steel and aluminium. Civil and Structure Detailing work. BOQ's and BBS of structure with detailed estimnation. Drafting of Architecture, structure and MEP work. Solving academic questions related to Civil engineering like, SFD BMD, Theory of Structure, mechanics. Have knowledge of different Software like ETABS, Autocad, Staad pro, Prokon, Idea statica, Sap2000 ,Revit, 3dmax Worked on Steel poles, Traffic Signal, Sign board as per EN 40 and AASHTHO LRDF standards. Have Knowledge of American, British and Indian standards. Code Experienced: IS 456, 875, 1893, 801 etc. ACI 318, ASCE, AISC[removed], AISC 341 BS 5950/8110, EC2 and EN 40

Being a Civil Engineer I will provide you Material Takeoff,Cost of Construction,BOQ,Bidding prepration and Detailed Estimate for all types of residential/commercial projects. The first order is free!... Read more

Being a Civil Engineer I will provide you Material Takeoff,Cost of Construction,BOQ,Bidding prepration and Detailed Estimate for all types of residential/commercial projects. The first order is free! Non-exhausted list of my services: Excavation Concrete(PCC & RCC) Sand Filling Masonry work(CMU wall & Brick veneer wall) Openings(Windows,Doors,Skylight etc) Plaster & Paint(Ceiling,Internal & External) MEP services Flooring(Tiles,Marbles,Terrazo etc) Woodwork(Wardrobe,Cabnets etc) Moisture & Thermal protection Equipments Structural Steel Bill of Quantities WHY HIRE ME ? Attention towards details Accurate material takeoff Unlimited revisions Help you winning bids Humble & Respectful

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic... Read more

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic designs, cost analysis, feasibility studies and Bim modelling. I have gained experience working with various software such as C3D, Revit and Infraworks. This has given me ample time to develop a strong work ethic necessary for work in the field. Previously I worked for AECOM ZA where I have had extensive site experience and built strong competencies in inspection, report writing and people’s management. I worked on the Temba water purification plant phase 6 (TWPP-6) and Mooi Mgeni transfer scheme phase 2 (MMTS-2). Working on various aspects of the TWPP-6 and MMTS-2 has given me a great appreciation and insight into the importance of Water and Environmental Engineering in the future of any developing country. As an Engineering inspector and water Engineer I have developed flexibility by being required to inspect multiple disciplines under construction supervision such as buildings and civils works on various water purification structures, pump stations, substations, pipe chambers precast yard and housing platforms. I have also done a good deal of pipe line inspection involving monitoring, clearing, excavation, laying of bedding material, pipe laying, backfilling, lining and coating pipes, mechanical installations, and commissioning. I was fortunate to gain valuable insight and exposure as student whilst working on the Spring Grove Dam under BKS Consulting. I worked in the laboratory for two weeks doing certain lab tests as well as the evaluation of the results. I assisted with the inspection of RCC as well as the reinforced concrete for the intake structure. I also monitored the design of the layer works for the roads and the design and construction of the earth embankment. The time spent with BKS Consulting allowed me the opportunity to monitor drawings and designs as well as practice on Auto CAD.

Diploma in Draughtsman Civil from ITI (Industrial Training Institute) India, with overall experience of Nineteen years, in Oil & Gas, Industrial & Commercial projects preparing Detailed Engineering D... Read more

Diploma in Draughtsman Civil from ITI (Industrial Training Institute) India, with overall experience of Nineteen years, in Oil & Gas, Industrial & Commercial projects preparing Detailed Engineering Drawings & 3D Models for Concrete & Steel Structures. Having the variety of experience in developing 2D Drawings using MicroStation, Autocad, & 3D Models using PDS Framework Plus & Revit Structure BIM Software, preparing Structural Detailed Engineering drawings for Oil & Gas, Industrial & Commercial projects, such as Buildings, Substations, Pipe Racks/ Pipe Bridges, Equipment supporting structures, platforms & Steel sheds. Equipment foundations: Storage Tanks, Compressors, Transformers, Vessels, Stacks, Exchangers, Pumps. Duct banks, Underground fuel tanks Overhead & Underground water tanks Clarifiers, Septic Tanks & Metering Stations Effluent Pump stations Mat & raft foundations Transmission tower foundation (drilled pier & piles). I am well versant with latest CADD & 3D Modeling softwares like PDS Framework Plus, Revit Structure BIM, Autocad, MicroStation, 3D SMax etc., & got Training in SmartPlant 3D & Tekla Structures. While being fluent in international standards related to CADD work. Specifically I am fully aware of standards of different restigious clients like SAUDI ARAMCO & SABIC, etc. Able to check the work of others & supervise less experienced or junior staff. Computer literate and conversant with MS Office suite and relevant engineering CADD software packages. Always willing to help other less experienced team members with workloads. Good communication, planning and organizational skills. Highly developed numeracy and computer literacy skills. Self-motivator and the ability to motivate others. Keeping up to date with industry best practice. Able to work on your own initiative as well as being a team player.

Total Experience : 19 years’ experience in 3D Modeling, AutoCAD and Micro station Drafting, Fabrication Drawing Checking, prepared Bar Bending Schedule & Quantity Estimation of RCC Structures. Wo... Read more

Total Experience : 19 years’ experience in 3D Modeling, AutoCAD and Micro station Drafting, Fabrication Drawing Checking, prepared Bar Bending Schedule & Quantity Estimation of RCC Structures. Working Field : Power Plant, Oil & Gas and Infrastructure Designation : Civil & Structural Modeler & Designer Using Software : Auto Cad, Micro Station-V8XM, PDS, Navisworks,CADMS, MS OFFICE, Navigator, TEKLA structure-16 (modeling Only), SP-3D(Training) Educational Qualification : Bachelor of Civil Engineering (2013)-60.50% From JamiaMilliaIslamia, New Delhi, Government of India, : Diploma In Civil Engineering (2003) -74.90% From Hooghly Institute of Technology, Government of West Bengal : I.T.I in Civil Draughtsman (1998) - 65.87% From I.T.I. Howrah Homes. Santragachi, Government of West Bengal :Madhyamik (1992) – 46.11% From Howrah RabindraVidyaMandir (Dist.-Howrah, West Bengal) Detailed Work Exposure : From June 2018 to till now Self working in my won field ( ex: building planning, lump sum quantity estimation etc.) I Name of Company : ENGINEERS INDIA LIMITED (Delhi) (contract-O&G Agency) From 24th Marc 2017 to May 2018 Designation : Civil & Structural Modeler Projects : 1. PVPL : All 3D Model of project 2. SRU REVAMP : All 3D Model of project 3. LEAN GAS COMPRESSOR AT HAZIRA : Compressor house and pipe rack. II. Name of Company : GS E&C Delhi Pvt. Ltd. (Gurgaon Campus) From 16th May 2013.to 6th October 2016 Designation : Civil & Structural Modeler (V) Projects : 1. RABIG II REFINING AND PETROCHEMICAL PROJECT Client: Aramco Overseas Company B.V & Sumitomo Chemical Co. Ltd. 2.WARA PRESSURE MAINTENANCE PROJECT Client: KUWAIT OIL CO. K.S.C 3.AEGEAN REFINERY PROJECT (ARP) Client: Star Refinery A.S 4. CLEAN FUELS PROJECT (CFP) Client: KNPC III. Name of Company : L&T- SARGENT & LUNDY LIMITED (Faridabad Campus) From 18th December 2008.to 15thMay 2013 Projects : 1. QURAYYAH INDEPENDENT POWER POJECT - 4000 MW (COMBINED CYCLE) Client: Hajir Electricity Production Company. RAJPURA THERMAL POWER PROJECT- 2X700 MW Client: NABHA Power Limited. 3. GHECO-ONE COMPANY 660 MW COAL-FIRED POWER PLANT Client: GHECO-ONE Company Limited. IV. Name of Company : DEVELOPMENT CONSULTANTS PVT. LTD.(New Delhi) From 17th November 2007 to 17th December 2008. Projects : 1. 2 X 250MW PARICHHA THERMAL POWER STATION (UNIT #5 & 6) 2. SURATGARH THERMAL POWER STATION. (1X250M.W) 3. BHUSHAN POWER & STEEL LTD. V. Name of Company : STUP CONSULTANTS PVT. LTD. (New Delhi) from 27th September 2006 to 16th November 2007. Projects : 1. DELHI METRO RAILWAY CORPORATION LTD. 2. ROAD OVER BRIDGE IN LIEU 3. FLOATING JETTY ON RIVER GANGA AT ALLAHABAD 4. FLOATING JETTY ON RIVER GANGA AT PATNA. 5. WHEEL PLANT AT CHHAPRA. VI. Name of Company : RDA CIVIL ENGINEERING SYSTEMS PVT. LTD. (New Delhi) From 12th April 2006 to 26th September 2006. Projects : 1. HOSTEL BUILDING OF IIM NOIDA. Working Area : Preparation of Design Drawings, Detail Drawing & Quantity estimate. 2. ANKITA RESIDENCY AT NOIDA. Working Area : Preparation of Design Drawings, Detail Drawing & Quantity estimate. VII. Name of Company : ASHRAY ARCHITECTURAL & STRUCTURAL CO. (HOWRAH) From 1st December 1998 to 28th March 2006 Designation : Civil & Structural Draughtsman Responsibility : Preparation of Design Drawings (concrete) & Quantity estimate. Supervision of Residential Building

I am a mechanical engineer. I have experience in many areas such as : robotics, automatic guided vehicles, unmanned ground vehicles, remote control units,medical devices, different manufacturing techn... Read more

I am a mechanical engineer. I have experience in many areas such as : robotics, automatic guided vehicles, unmanned ground vehicles, remote control units,medical devices, different manufacturing techniques, composites materials, electronic hub motors casign designs, clean energy, mold design, 3d printer. I have done many projects in that areas since I started to university and after my graduation. I worked some robotics and mechatronics companies while at universty as a part time after graduation full time. I have designed and produced prototype and final products. I am ready to work from your sketches, descriptions, drawings or images on anything from idea to concept to details. Speciality ; * Mechanical Design * 3D modeling * Manufacturing drawings * Machine design * Sheet metal design * Surface design * Mold design * Product Design * Mechanisms Softwares : * Solidworks (2D/3D) * Catia * Ansys * 3ds-max * Keycreator * Keyshot

Highly proficient in SOLIDWORKS solid and surface modelling. Mechanical Engineer by profession. Interested in automotive CAD projects Read more

Highly proficient in SOLIDWORKS solid and surface modelling. Mechanical Engineer by profession. Interested in automotive CAD projects

I'm Expert in solidworks for 6 years and working in Manufacturing field so along my way always design products and machines and improving it to achieve customers vision. Design & Manufacturing produc... Read more

I'm Expert in solidworks for 6 years and working in Manufacturing field so along my way always design products and machines and improving it to achieve customers vision. Design & Manufacturing products like Mechanical lifting, Electrical Enclosure, wrap stretch machines and gates

In professional profile, I’m working as a Mechanical Engineer. In my job I have many duties, which are: Planify – with a Gantt Chart- all the activities of the project I’m working on, supervise my emp... Read more

In professional profile, I’m working as a Mechanical Engineer. In my job I have many duties, which are: Planify – with a Gantt Chart- all the activities of the project I’m working on, supervise my employees, and design – CAD aid- mechanical elements, mechanism and machines that are needed; therefore, my experience in the industrial area of my career is rich in the main fields. I have over 8 years of mechanical engineering practical design experience.

I am a Mechanical Engineer with more than 5 years of experience in CAD/CAM/CAE , 3DMODELLING and rendering, SOLIDWORKS, CATIA, NX CAD,Machine Design, Expert in product at the same time I am expert... Read more

I am a Mechanical Engineer with more than 5 years of experience in CAD/CAM/CAE , 3DMODELLING and rendering, SOLIDWORKS, CATIA, NX CAD,Machine Design, Expert in product at the same time I am expert in powerpoint presentation,report writing technical preferred,MS word. I am just new to this website having no reviews but within few days I will be one of the most preferred freelancer because of my skills,work culture, me the satisfaction of client is the highest priority hence I always focus on providing the quality work at lowest cost in the minimum time possible.I never accept and promise anything that I cannot do. Good Thing is that I offer support even after completion of my project, if you are in urgent need then remember me that I am always there for is no time limitations to my work and my work is ethical and genuine. Always at your service and forever. With utmost respect to all my clients!!

Master's degree in mechanical engineering with a focus on computational methods and modeling. As a graduate student ambassador at Northeastern University, I have been involved in various academic and... Read more

Master's degree in mechanical engineering with a focus on computational methods and modeling. As a graduate student ambassador at Northeastern University, I have been involved in various academic and extracurricular activities, such as mentoring new students, organizing events, and participating in research projects. I have also gained valuable industry exposure and hands-on skills through my internship at ONGC Mangalore Petrochemicals Ltd, where I assisted in the design and analysis of heat exchangers and boilers. I am proficient in MATLAB, COMSOL, SOLIDWORKS, and Python, and have earned multiple certifications in engineering drawings and Fusion 360. I am passionate about solving complex engineering problems and applying my knowledge to real-world challenges. I aspire to become a successful engineer and researcher in the field of mechanical engineering and contribute to the advancement of science and technology.

I am working as a mechanical design engineer and have decent knowledge in the engineering design field. I have the professional experience to design a final product from its initial ideas and requirem... Read more

I am working as a mechanical design engineer and have decent knowledge in the engineering design field. I have the professional experience to design a final product from its initial ideas and requirement. Catia and Siemens NX are the major 3D modeling software I use, to make 3D parts and 2D drawings. I always try to maintain proper drafting rules in engineering drawing to deliver ease to the clients as well as the manufacturers. As a young engineer I try to explore more industries and products, it confers me a good knowledge in this field. Furthermore, I have good knowledge of design engineering, which enables me to deliver a benign design solution.

2D to 3D Conversion Releases layout or G.A. in 3d. (SPM, BOILERS) Conceptual design for SPM. Parametric modelling Weldmentassemblies for fabrication. Preparation of Manufacturing Drawingfor... Read more

2D to 3D Conversion Releases layout or G.A. in 3d. (SPM, BOILERS) Conceptual design for SPM. Parametric modelling Weldmentassemblies for fabrication. Preparation of Manufacturing Drawingfor machined components with GD & T & Welding symbol Preparation of manufacturing drawing of steel structure, Chimney (stack), Platform, Staircase, Ducting etc. from G.A. Design of Exhaust system Preparation of 3 axis Ducting & piping 3D model & its manufacturing drawing Design of Acoustic enclosure for DG set Design, generate cutting files, bending & fabrication drawings for Sheetmetalproducts

Are you looking to transform your creative visions into stunning 3D realities? Look no further! As a skilled 3D designer, I bring your ideas to life with precision and flair. Whether you need captiva... Read more

Are you looking to transform your creative visions into stunning 3D realities? Look no further! As a skilled 3D designer, I bring your ideas to life with precision and flair. Whether you need captivating 3D models for architectural visualization, product design, or animation, I have the expertise to make it happen. Imagine having the power to showcase your products in immersive 3D, giving your audience a truly unforgettable experience. My designs not only captivate but also drive engagement and conversions. Ready to take your projects to the next dimension? Contact me today, and let's collaborate to turn your concepts into 3D masterpieces that leave a lasting impression. Elevate your visual content with my 3D design expertise - let's get started!

3D Modelling Product Design 2D Design 3D Design Manufacturing Mechanical Design Creo UGNX Mechanical Engineering Product Development Rapid Prototyping SolidWorks Read more

3D Modelling Product Design 2D Design 3D Design Manufacturing Mechanical Design Creo UGNX Mechanical Engineering Product Development Rapid Prototyping SolidWorks

I recently completed Master of Technology (MTech) from Indian Institute of Technology (IIT Bombay), Mumbai in Mechanical Engineering with Manufacturing Engineering specialisation. Read more

I recently completed Master of Technology (MTech) from Indian Institute of Technology (IIT Bombay), Mumbai in Mechanical Engineering with Manufacturing Engineering specialisation.

Graduate Engineer with 10 year experience in Designing and development of Tools (Assembly and Inspection Fixture) and Die, Mold for Aerospace & medical company (AS9100 CAT D) company. Read more

Graduate Engineer with 10 year experience in Designing and development of Tools (Assembly and Inspection Fixture) and Die, Mold for Aerospace & medical company (AS9100 CAT D) company.

Undergraduate Mechanical Engineer currently in the Pre-Final year of a Bachelor’s degree. Passionate about mechanical science, specifically intrigued by the industrial applications of CAD/CAM and Addi... Read more

Undergraduate Mechanical Engineer currently in the Pre-Final year of a Bachelor’s degree. Passionate about mechanical science, specifically intrigued by the industrial applications of CAD/CAM and Additive Manufacturing. Interested to work in the areas of Additive Manufacturing and Mechanical Designing. Well versed with industrial software.

Myself, Prasant Tajane, having 3 years and 2 months experience in designing CAD models and performing simulation and CFD analysis as per requirements by OEM's and Customers. CAD Models:- 1. Sheet me... Read more

Myself, Prasant Tajane, having 3 years and 2 months experience in designing CAD models and performing simulation and CFD analysis as per requirements by OEM's and Customers. CAD Models:- 1. Sheet metals designing and development 2. Plastic Automotive trims and product development 3. Progressive Tool Design and Mould/ Cavity design CAE Models:- 1. 2D meshing of 2.54 mm steel sheet metal bracket for 2MPa CAE 2. Water meter for hydro-static pressure of 20 Bar 3. Motion Simulation for assemblies components and linkage working