Hire the best freelance HVAC Duct and Pipe Modeling expert designers for your company

I like to see a job through from start to finish. I've designed systems of all shapes and sizes in Massachusetts. To list a few: Boiler plants, Chiller plants, Geothermal Heat Recovery Chillers, Geoth... Read more

I like to see a job through from start to finish. I've designed systems of all shapes and sizes in Massachusetts. To list a few: Boiler plants, Chiller plants, Geothermal Heat Recovery Chillers, Geothermal Condensers, Rooftop & Air Handling Units, Active Chilled Beam systems, Overhead VAV, Displacement Dehumidification VAV, VRF systems. Work from me will include load calculations, selection files, and revit models with fully calculating ductwork and piping systems. My latest work has been in the design of schools (200,000 sqft +) and police / fire stations in Massachusetts. I can explain the magic of displacement dehumidification and active chilled beams to architects and engineers alike. Very familiar with Mass code and LEED. Please feel free to reach out if you have a job of any size and a schedule of submissions, and I'll be sure to contact you directly for more information.

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating comp... Read more

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating complex hydraulic control skids for offshore use

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential bu... Read more

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential buildings, C-Store, Fuel System, frames, plumbing -piping, fixtures, etc. I can work on plumbing and Fire protection drawings and MEP coordination. Aware of Plumbing design codes like IPC UPC, have used NFPA. I can do COMcheck, HVAC load calculations, plumbing pipe sizing, grease interceptor calculations, and permit plans.

I run a product design and engineering company based in New Jersey (US), delivers top notch Computer Aided Design (CAD) solutions, expertise in Solidworks, Ansys, AutoCAD 2D/3D Drafting, Revit MEP & A... Read more

I run a product design and engineering company based in New Jersey (US), delivers top notch Computer Aided Design (CAD) solutions, expertise in Solidworks, Ansys, AutoCAD 2D/3D Drafting, Revit MEP & Architecture, 3DS Max, SketchUp, etc. Our services include: New Product Design, CAD Drafting, 3D CAD Design, Architectural Drafting, Revit Modeling, Mechanical Drafting, 3D CAD Modelling, Solidworks Design, CAD Conversion, Revit BIM, House Plan Drafting, Floor Plan, Building Information Modeling (BIM), Architectural Engineering Construction (AEC) Design, Mechanical Electrical Plumbing (MEP) Drafting, Heating Ventilation Air Conditioning (HVAC) Design & Analysis, Computational Fluid Dynamics (CFD) Analysis, Stress Analysis, Computer Aided Engineering (CAE), Finite Element Analysis (FEA), Fire Smoke Simulation, Paper to CAD Conversion, Revit 3D Modeling, Drafting & Rendering, Clash Detection, Revisions and Reverse Engineering.

I am a Mechanical Design Engineer with over 3 years of professional experience in creating manufacturing-ready 3D models and 2D drawings using SolidWorks. I specialize in sheet metal design, agricultu... Read more

I am a Mechanical Design Engineer with over 3 years of professional experience in creating manufacturing-ready 3D models and 2D drawings using SolidWorks. I specialize in sheet metal design, agricultural and heavy machinery components, and plastic product development, delivering practical, cost-effective solutions aligned with real-world manufacturing constraints. My expertise covers the complete product development cycle—from concept and reverse engineering to detailed design, assembly modeling, and production drawings. I have strong hands-on knowledge of fabrication processes, laser cutting, bending, welding, machining, and injection molding, ensuring designs are optimized for accuracy, strength, and ease of manufacturing. Core Skills & Expertise: SolidWorks (Parts, Assemblies, Sheet Metal, Weldments) Manufacturing & Production Drawings (2D & 3D) Sheet Metal Design & Flat Pattern Development Agricultural & Heavy Machinery Components Design for Manufacturing & Assembly (DFM/DFA) Reverse Engineering & Design Optimization I am committed to clear communication, timely delivery, and precision-driven design. Whether you need a single part, a complex assembly, or a complete product design, I focus on delivering solutions that meet technical requirements and manufacturing realities. Let’s collaborate to turn your ideas into reliable, production-ready designs

ECM is a company based in Nicaragua dedicated to the implementation and documentation of BIM methodology. We offer a series of services with CAD/BIM solutions for Architecture, Engineering and Constru... Read more

ECM is a company based in Nicaragua dedicated to the implementation and documentation of BIM methodology. We offer a series of services with CAD/BIM solutions for Architecture, Engineering and Construction (AEC) and the effective transition to BIM. We have a multidisciplinary, innovative and investigative team dedicated to the development of projects within the methodology, for which we incorporate high quality standards that guarantee that our solutions have the most positive impact in any context of architecture, structure and MEP applying BIM softwares in any type of project.

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching... Read more

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching overseas clients, take the follow-ups, and generate new business. Raywell Studio Pvt Ltd. provides a full range of BIM, Engineering, and Visualization services for a wide variety of Construction Projects. Raywell Studio believes that trust, communication, and collaborative working are key to successful project delivery. We have experience working in a dynamic & complex projects environment and are proud of our strong and lasting relationships with our clients and able to work with key clients closely. As a global BIM expert, we offer 3D-4D-5D and production of Architecture, Structural & MEP Engineering services. We assist some of the International Design-Build and General contracting firms in the USA & Middle East for their projects across the globe. Alice White * www.raywellstudio.com * ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ * https://www.linkedin.com/company/raywellstudio/

I am a professional MEP Site Engineer with expertise in AutoCAD drafting and Revit MEP design. I have worked on hospital, hotel, and industrial projects, What I offer: ✔ AutoCAD 2D drafting and detai... Read more

I am a professional MEP Site Engineer with expertise in AutoCAD drafting and Revit MEP design. I have worked on hospital, hotel, and industrial projects, What I offer: ✔ AutoCAD 2D drafting and detailed floor plans ✔ Revit MEP modeling (HVAC, electrical, plumbing) ✔ BOQ interpretation and area calculations ✔ Fast delivery and clear communication Why choose me? - Hands-on experience in large-scale projects (hospital, hotel, industrial) - Strong focus on accuracy, safety, and quality control - Affordable packages for engineering firms - Dedicated to meeting deadlines and client satisfaction

I’m a Professional Draftsperson with strong knowledge in extraction and processing mineral projects highlighting my participation in copper, gold, iron and coal mining projects in its different stages... Read more

I’m a Professional Draftsperson with strong knowledge in extraction and processing mineral projects highlighting my participation in copper, gold, iron and coal mining projects in its different stages. My professional experience has been developed in Chilean and multinational companies therefore I can adapt quickly and easily to different types of leaderships. I know how important and transcendental can be to coordinate my work with my co-workers, therefore I have actively and constant participation with proven record of delivering high-quality drawing solutions and being a constant support for my manager. My commitment, ethics and high degree of responsibility for my work make me a reliable professional. I'm Proactive, dynamic and effective standing out for having a fast learning, management skill, planning and commitment for results that allow me to respond very well to periods under pressure being able to perform tasks without any supervision.

BimxCad is a premier BIM and MEP design engineering firm specializing in high-accuracy drafting, 3D modeling, and comprehensive Building Information Modeling (BIM) solutions. Powered by a team of dedi... Read more

BimxCad is a premier BIM and MEP design engineering firm specializing in high-accuracy drafting, 3D modeling, and comprehensive Building Information Modeling (BIM) solutions. Powered by a team of dedicated specialists and advanced engineering software—including Revit MEP, AutoCAD MEP, and SketchUp—we transform complex mechanical, electrical, plumbing, and fire protection engineering concepts into precise, actionable digital assets. ​Our expertise spans across residential, commercial, and industrial sectors, delivering scalable solutions that streamline construction workflows, eliminate on-site coordination conflicts, and optimize lifecycle management for modern infrastructure. Core Capabilities • MEPF Design Engineering Solutions • Comprehensive BIM Solutions • ​Precision Drafting & Documentation: • ​Advanced 3D Modeling & Visualization: • Facility management (Cobie) • As-built Support Our Commitments & Core Values • Uncompromising Quality • ​Clear & Transparent Communication • ​On-Time Delivery The BimxCad Advantage ◦ ​Precision ◦ Coordination ◦ Efficiency.

Skilled and Experienced in using Autodesk Revit, Autodesk Fabrication, AutoCAD, Navisworks, PTC Creo Parametric , Ansys. Skilled In REVIT Parametric Family Creation and AutoCAD Block Creation Skilled... Read more

Skilled and Experienced in using Autodesk Revit, Autodesk Fabrication, AutoCAD, Navisworks, PTC Creo Parametric , Ansys. Skilled In REVIT Parametric Family Creation and AutoCAD Block Creation Skilled In Structural and Dynamic analysis using Ansys or any other tool. Skilled 3d Modeler , can model complex 3d structures. Experienced in HVAC Heat load calculations for large scale commercial projects.

Experienced Design Engineer with a demonstrated history of working in the MEP design industry. Skilled in AutoCAD, Revit and MS Office. Strong engineering professional with a Bachelor of Engineering... Read more

Experienced Design Engineer with a demonstrated history of working in the MEP design industry. Skilled in AutoCAD, Revit and MS Office. Strong engineering professional with a Bachelor of Engineering focused in Mechanical Engineering from Adhiparasakthi Engineering College.

I'm a professional HVAC Draughtsman located in Mumbai, working in this feild from last 3 years. Worked with AUTOCAD on almost 100+ projects in my career. Well versed in AUTOCAD. I can work on any type... Read more

I'm a professional HVAC Draughtsman located in Mumbai, working in this feild from last 3 years. Worked with AUTOCAD on almost 100+ projects in my career. Well versed in AUTOCAD. I can work on any type of HVAC project designing single line diagram (SLD) and Double Line Diagram (DLD) with sections. All the designs based on ASHRAE and ISHRAE methods. Looking forward to working with you.

I have over 5 years of experience drafting Mechanical building system designs in Autodesk Revit, along with some plumbing design experience. I am great at turning engineer redlines into fully coordina... Read more

I have over 5 years of experience drafting Mechanical building system designs in Autodesk Revit, along with some plumbing design experience. I am great at turning engineer redlines into fully coordinated 3D models to produce construction documents and asset model deliveries for projects. Please find me on LinkedIn!

I am a mechanical designer who specializes in HVAC and Plumbing. My work experience spans over 100 jobs large and small, from larger multi-million dollar projects (such as wastewater treatment facilit... Read more

I am a mechanical designer who specializes in HVAC and Plumbing. My work experience spans over 100 jobs large and small, from larger multi-million dollar projects (such as wastewater treatment facilities and Schools) to smaller renovation projects (such as retail tenant space fit-out). I also have 20 years of CAD experience.

Filipino Registered Mechanical Engineer 2015 and Registered Master Plumber 2018

Filipino Registered Mechanical Engineer 2015 and Registered Master Plumber 2018

We are specialized in engineering solutions to the manufacturing and construction industry. Our main expertise is on the design, study and supervision for industrial, transport and commercial installa... Read more

We are specialized in engineering solutions to the manufacturing and construction industry. Our main expertise is on the design, study and supervision for industrial, transport and commercial installations. We can offer you a complete support, so your projects will be finished successfully. We have more than 20 years of experience working in Argentina and have also made some international projects, such as bogies for Hawai Airport and Hawail Hilton trams. Since we are CAD specialists, I would like to offer our service for drafting outsourcing.

This is Sariful Islam. I am studying in Mechanical Engineering at IUBAT. Throughout my academic career I have been praised by many faculties and peers because of my creativity and complex problem solv... Read more

This is Sariful Islam. I am studying in Mechanical Engineering at IUBAT. Throughout my academic career I have been praised by many faculties and peers because of my creativity and complex problem solving ability. I am very energetic, motivated and professional person. I am expert in 3D model design. I also have expertise on Graphics Design. I have learned AutoCAD 2D and 3D , Solid Works, CATIA, ANSYS Workbench, Adobe Photoshop and Adobe Illustrator through online. I have designed several sample product for my friend's university thesis project by those design tool. I also learned HVAC design form IEB. i can estimate load and calculate duct size. Hopefully i can fulfill your expectation. Do not feel shy to knock me. Hope you will fell comfortable by working with me. Hoping for a great Journey with you

I am Mechanical Design Engineer. I have work experience of 5 years as designer. I am good in mechanical design, Product design, HVAC Systems design & Duct design various types of company like Pharmace... Read more

I am Mechanical Design Engineer. I have work experience of 5 years as designer. I am good in mechanical design, Product design, HVAC Systems design & Duct design various types of company like Pharmaceutical, Textile, Foods, Power plant, Foils Factory etc. I have good knowledge in AutoCAD, Solidworks, Microsoft Advance Excel, Microsoft Power point & Microsoft Word. Best Quality Works With Lowest Price guaranteed. No any rework charges. 100% Work satisfaction Thanks you...

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industri... Read more

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industries for over 9 years with design experience of various facilities including: tank batteries, CVR systems, well testing systems, gas plants, water plants, dehydration plants, pump stations, equipment skids and pipe lines to name a few. My responsibilities have included, but have not been limited to, piping design, structural design, onsite as-built verification, 3D Laser Scanning, drawing production, and construction support. I’m proficient in multiple 2D and 3D softwares such as, AutoCAD, AutoCAD Plant 3D, CADWorx, Solidworks, and Aveva’s PDMS.

10+ years’ in the Mechanical Construction Industry – encompassing Pipefitting, Welding, Field Supervision, BIM Coordination and Project Management positions Management of projects exceeding five mi... Read more

10+ years’ in the Mechanical Construction Industry – encompassing Pipefitting, Welding, Field Supervision, BIM Coordination and Project Management positions Management of projects exceeding five million dollars in single contract value Municipal and Private Sector experience New construction and renovation

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

I offer expert HVAC design services tailored to meet your needs. Whether you're planning a residential, commercial, or industrial project, I provide customized heating, ventilation, and air conditioni... Read more

I offer expert HVAC design services tailored to meet your needs. Whether you're planning a residential, commercial, or industrial project, I provide customized heating, ventilation, and air conditioning systems that ensure optimal comfort, energy efficiency, and compliance with industry standards. Services include load calculations, system layouts, ductwork design, equipment selection, and detailed CAD drawings. Lets bring your project to life with a reliable and sustainable HVAC solution! Feel free to provide additional details if you'd like it to be more specific or personalized!

I am a Mechanical HVAC Engineer and have worked for various construction, design-build, and consulting engineering firms. I focus on small to large Residential and commercial projects, including offi... Read more

I am a Mechanical HVAC Engineer and have worked for various construction, design-build, and consulting engineering firms. I focus on small to large Residential and commercial projects, including office or buildings, restaurants, hospital , and higher education

Mechanical Engineer specializing in HVAC estimating, quantity takeoffs, technical documentation, and AutoCAD-based drawing review. I bring 15+ years of progressive experience across field operations,... Read more

Mechanical Engineer specializing in HVAC estimating, quantity takeoffs, technical documentation, and AutoCAD-based drawing review. I bring 15+ years of progressive experience across field operations, project coordination, budgeting, proposals, and mechanical systems, beginning with technical internships in 2009. I support contractors, engineering firms, and design teams with: • HVAC quantity takeoffs from PDF or DWG drawings • Ductwork, piping, equipment, and accessory schedules • Drawing and specification reviews with RFIs, assumptions, and exclusions • AutoCAD drawing updates based on markups • Scope organization, bills of quantities, and technical documentation My project experience includes commercial and healthcare facilities, VRF/VRV systems, chilled-water systems, mechanical ventilation, and multidisciplinary coordination. I work carefully, communicate clearly, and provide organized deliverables that are easy to review and price. I am based in Brazil, fluent in English and Portuguese, and available for remote projects aligned with U.S. business hours. Services are provided as technical support and do not include professional stamps, permit approval, ART, or Engineer-of-Record responsibility.

I have years of experience in HVAC system design for industrial, commercial and residential projects. I have firm grip on HVAC design and drafting softwares including Revit, Trace, HAP, AutoCAD etc.

I have years of experience in HVAC system design for industrial, commercial and residential projects. I have firm grip on HVAC design and drafting softwares including Revit, Trace, HAP, AutoCAD etc.

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventu... Read more

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventually becoming a Senior Contracts Manager taking charge of large HVAC installations. My Job description: • Duct design and workshop drawing plantroom layout. • Liase with client / consultants and architect on mechanical building services co-ordination and planning. • Workshop, site co-ordination and supervision. • Air-conditioning chilled, hot water piping schematics and layout details. • Tendering and estimating of jobs • Attend site and co-ordination meeting • Procurement of equipment • Monthly invoicing of contracts • Chilled water pipe calculations using the carrier design program. • Writing and compiling air conditioning maintanace manuals. • Design and manufacture of custom built chilled water air handling units for southern air conditioning contracts After 25 years I moved to a HVAC Design Consultancy Company as a Senior Design Engineer. My Job description • Budget proposal reports • Preliminary design reports • Hvac design. • Liase and architect on mechanical building services coordination and planning. • Attend plannining, site and co-ordination meetings. • Financial control up to final account. • Supervision of contract construction to final completion. • Suppervision of the hvac commissioning