Hire the best freelance Heat Exchanger Design expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I have 7 years of industry experience as a mechanical Engineer Specializing in Design, Manufacturing techniques and Modelling. I always keep relevant codes and standards in consideration.I have skills... Read more

I have 7 years of industry experience as a mechanical Engineer Specializing in Design, Manufacturing techniques and Modelling. I always keep relevant codes and standards in consideration.I have skills in data Entry, PDF conversion and other document conversion tasks. I am also familiar with Piping, Steel Structure ,Skid, Pressure Vessels ,Tanks and Heat Exchanger Design and 3D Modeling and Fabrication. I am experienced with the following :- - 2D Technical Drawing for Fabrication. - DXF File for Laser cutting Machine. - Drafting 2D Drawing From PDF File,Images,Hand Drawing. - Developing & Design New products. - Rendering. - Review Drawings and Calculate BOQ for Project Activities. - Prepare Material Requisition Document. - Issue As - Built Drawings as per Site Condition or Fabrication. I Deliver the following :- - Professional Technical Drawing for Fabrication ( DXF,DWG,PDF, SLDDRW ) - Professional 3D Modelings I always strive to clearly understand my customer’s needs before starting any project to make sure we are aligned on what the final product should be. I look forward to our first conversation about your next project. Thanks

We are an Engineering Product Design & Development services company having vast experience with OEM and Service Industry. We offer complete engineering solutions from Concept design to release of m... Read more

We are an Engineering Product Design & Development services company having vast experience with OEM and Service Industry. We offer complete engineering solutions from Concept design to release of manufacture drawings including , Forming, and prototype build solutions. Radiant Design has a team of experts in the following areas ​ -CAD conversions -Machine Design -Product Design -Reverse Engineering -Tools and Fixtures design -Finite Element Analysis (FEA) -CAD Rendering -Mould Design & Analysis -Enclosure/Case Design -3D Printing/Vacuum Casting -Manufacturing/Prototyping

Senior Mechanical Design Expert | 24 Years HVAC / Heat Pump / Industrial Heat Pump Experience Turn your HVAC or heat pump product from concept to mass production — efficiently, reliably, and certific... Read more

Senior Mechanical Design Expert | 24 Years HVAC / Heat Pump / Industrial Heat Pump Experience Turn your HVAC or heat pump product from concept to mass production — efficiently, reliably, and certification-ready. I have over 24 years of experience in mechanical structure design and product development in HVAC, heat pumps, and smart appliances. I have successfully led 200+ products from concept to mass production. My products are widely exported to Europe and North America, fully compliant with CE, UL, Keymark, TÜV, DVGW, UBA, KTW and other international standards, with strong experience in certification-oriented design. My Background Top-Tier Industry Experience: Worked at leading companies with mature product development systems: - Midea Group (Fortune Global 500) - A leading listed heat pump company - Chigo Air Conditioning (00449.HK) International Client Experience: Extensive experience working with global clients, providing customized product development: Carrier / Iceair / Thermondo / Kaisai / Olimpia / Notus / SKD Patents: - 1 National Priority Invention Patent - 12 Invention Patents - 100+ Utility Model Patents Core Expertise 1. HVAC / Heat Pump Structural Design - Full unit structure design (indoor / outdoor / integrated units) - Refrigeration system integration (compressor, heat exchangers, piping layout) - Noise reduction optimization (airflow vs noise balance) - Waterproofing, anti-vibration, piping stress & reliability design - Electrical enclosure safety & system integration 2. Industrial Heat Pump & HVAC Design - Industrial-grade heat pump system design - Industrial HVAC equipment (high reliability / long lifespan / harsh environments) - Custom non-standard equipment structure design 3. Manufacturing-Oriented Engineering (DFM / DFA) - Design for Manufacturing (DFM) - Design for Assembly (DFA) - Cost optimization - Mold feasibility analysis (plastic / sheet metal) Service Scope Heat Pump Products: Residential heat pumps (Monoblock / Split), modular systems, integrated water systems / hydraulic modules Air Conditioning & Light Commercial HVAC: Indoor / outdoor unit structure design, PTAC / window AC / portable AC, heat exchanger design (evaporator / condenser), electrical cabinet design Industrial & Custom Equipment: Industrial air conditioning, custom equipment structure design Additional Design Services: Sheet metal design, plastic part design, HVAC piping optimization, product upgrade & partial redesign Mold & Manufacturing Support: Mold design review (DFM), injection molding / sheet metal process optimization, supplier sourcing & factory coordination Cross-Functional Collaboration: Work with thermal engineers (refrigeration system optimization), work with electrical engineers (control system integration), support full system-level product development China-Based Engineering Support: Reliable supplier sourcing, on-site or remote production support, fast issue resolution during prototyping and mass production What I Need From You (Before Starting) To ensure an efficient project process, please provide as much as possible: 1. Basic Product Information: - System diagram / schematic - Sketch / concept / idea - Reference images or benchmark products 2. Certification & Market Requirements: - Target certifications (CE / UL / Keymark / TÜV, etc.) - Target market (Europe / North America, etc.) 3. Production Information: - Target production volume (prototype / small batch / mass production) - Whether you already have a factory or supply chain 4. Design & Manufacturing Preferences: - Material preference (plastic / sheet metal / hybrid) - Special requirements (cost target / appearance / size constraints, etc.) Even if you only have a rough idea or simple sketch, feel free to contact me. I can help you refine the concept and bring your product to life. My Commitment ✔ On-time delivery ✔ Design compliant with international standards (CE / UL, etc.) ✔ Production-ready, manufacturable design ✔ Free initial technical consultation ✔ Reliable and efficient communication

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, ther... Read more

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, thermal systems, and custom industrial machinery, working in compliance with European regulations and standards such as EN 13445, PED, AD 2000, and ATEX when applicable. My background includes the complete engineering lifecycle of industrial equipment: • Concept development and feasibility studies • Mechanical and thermal calculations • Pressure equipment design and verification • CAD design and detailing (SolidWorks, AutoCAD, Plant 3D) • Manufacturing drawings and technical documentation • Design optimization for safety, cost, and manufacturability • Support for certification, audits, and regulatory compliance I have extensive experience working with regulated environments, including pharmaceutical and process industries, where traceability, documentation quality, and compliance are critical. Typical deliverables I provide include calculation reports, Excel-based engineering tools, 2D manufacturing drawings, 3D CAD models, and technical documentation ready for internal reviews or third-party certification. I work closely with clients to translate functional requirements into robust, manufacturable engineering solutions, maintaining clear communication, realistic timelines, and a strong focus on engineering quality. Industries served include industrial equipment manufacturers, process engineering companies, pharmaceutical and biotech suppliers, and custom machinery builders.

' Give me your static parameters and I'll handle the Entropy' In simpler terms, I'll turn your imagination into reality. I am a full time Engineer and a part time Designer. The remaining time I... Read more

' Give me your static parameters and I'll handle the Entropy' In simpler terms, I'll turn your imagination into reality. I am a full time Engineer and a part time Designer. The remaining time I oscillate between both.Well, it has been 7 years and am still oscillating. In short, I do everything from and between prototyping to generating business out of it.

👋 Hello! I'm Eng. Ahmed Hamdy, a Mechanical Design Engineer with 7+ years of specialized experience in Static Equipment Design including Pressure Vessels, Process Piping, Piping Stress Analysis, and... Read more

👋 Hello! I'm Eng. Ahmed Hamdy, a Mechanical Design Engineer with 7+ years of specialized experience in Static Equipment Design including Pressure Vessels, Process Piping, Piping Stress Analysis, and API Storage Tanks. I bring a deep command of international codes and standards such as: 🔧 ASME Sec. VIII Div. 1 & 2 🔧 ASME B31.1 / B31.3 🔧 API 650 My expertise includes: ✅ Pressure Vessel & Heat Exchanger Design ✅ Process & Power Piping Layouts and Stress Analysis ✅ Storage Tank Detailing and Fabrication Drawing ✅ Compliance with ASME/API design requirements ✅ Comprehensive 3D Modeling and Design Documentation I deliver engineering documentation with precision and compliance, including: 📌 GA Drawings & Fabrication Drawings 📌 Isometric and Piping GA Drawings 📌 BOM/MTO, Data Sheets & Specifications 📌 Stress Analysis Reports (Caesar II) 📌 Pipe Support & Structural Design Reports 💻 Software Proficiency: AutoCAD | AutoCAD Plant 3D | AVEVA E3D | SolidWorks | Caesar II | STAAD.Pro | Tekla Structures I collaborate closely with multi-disciplinary teams and participate in: 🔹 Project Kick-off Meetings 🔹 3D Model & P&ID Reviews, Plot Plan Reviews, HAZOP sessions 🔹 Managing MOCs (Management of Change) from concept to commissioning As a focal point for Piping Design & Stress Analysis, I ensure all modifications are properly integrated, prioritized, and aligned with project timelines — especially during Turnaround (TAR) Planning. My goal is to contribute to your project's success by combining technical accuracy with high-quality deliverables and effective communication. Let’s connect and discuss how I can support your next project with world-class mechanical design solutions. Eng/ Ahmed Hamdy Mechanical Design Engineer | Static Equipment | Pressure Vessel | Piping Stress Analysis (ASME/API)

Greeting Cad Crowd Family! My name is Ishtiaq. An experienced & competent mechanical engineer with strong skills in MEP & HVAC systems designing and drafting. Proficient in CAD/CAE software and colla... Read more

Greeting Cad Crowd Family! My name is Ishtiaq. An experienced & competent mechanical engineer with strong skills in MEP & HVAC systems designing and drafting. Proficient in CAD/CAE software and collaborating with cross-functional clients. If you are seeking a curious and result oriented individual, let's get in contact. Thanks and Best Regards ISHTIAQ

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

Solidworks-AutoCad-Creo-Ansys Heat Exchangers analysis. Winner of Design competition of Automatic Cricket Bowling machine.

Solidworks-AutoCad-Creo-Ansys Heat Exchangers analysis. Winner of Design competition of Automatic Cricket Bowling machine.

I am a seasoned, Mechanical Design Engineer with work experience of 12 years in many industries and expertise to develop standards for anything from materials to products, specs to process specs, and... Read more

I am a seasoned, Mechanical Design Engineer with work experience of 12 years in many industries and expertise to develop standards for anything from materials to products, specs to process specs, and operating procedures. I would bring to you a great deal of experience in everything and anything required to develop quality products, process planning, verification, and validation of design. Strong domain knowledge in design: Plastics Injection Mould Design, Valve - casting & Forging, Industrial Pumps, Special purpose Machines, Injection molding machines, blow molding machines, extruders, heat exchangers and pressure vessels.

My ultimate goal is to provide you with full solution and engineering resources to make your idea a reality and ready for appropriate manufacturing process In my design house company, I learned how to... Read more

My ultimate goal is to provide you with full solution and engineering resources to make your idea a reality and ready for appropriate manufacturing process In my design house company, I learned how to design, analysis, manufacture and manage mega projects like  100 kw micro gas turbine  marine pod drive  diesel dual turbocharge modification  design and manufacturing marine heat exchangers, aftercoolers, sea water strainers and hydro cyclones  design and manufacturing of NEV car  Design of small electric passenger car Over the last 12 years I have gained extensive knowledge and experience in all aspects from initial design until different manufacturing phases. Some of the services presented:  mechanical design engineering  turbomachinery design  CAD, drafting and parts assembly  gearbox design  surface modeling  reverse engineering  flow simulation  stress analysis FE  sheet metal design  heat exchanger design

Being a graduate Mechanical Engineer with above 40 years of experience in Plant design (Static equipment, Rotary selection, Package) in middle east, Africa, Japan, UK, offer Engineering Design Service... Read more

Being a graduate Mechanical Engineer with above 40 years of experience in Plant design (Static equipment, Rotary selection, Package) in middle east, Africa, Japan, UK, offer Engineering Design Services to our valued clients. I'm at your disposal for your projects in hand. Offer Design Services in the following areas: -Design of Static Equipment (Pressure vessels, Exchangers, Storage tanks) -Piping Design -Rotary Equipment -Skid work design -3D Modelling [Plant Equipment and any other item] Kindly do not hesitate to contact -if need any of engieering services as above

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but... Read more

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but I also used Catia V5/6 in the academic field. Experience with Matlab as numeric software, and experience with PTC Creo Simulate and Abaqus as FEA Software. During my professional life I have been working on design of racing cars with particular focus on powertrain installation, cooling systems, hydraulic systems, CNC machined components and composite material made components and related jigs and toolings, 3D printed components. Currently working in the food processing industry and involved in the design of industrial machineries and related items (fluid machinery, system's dimensioning and layout design).

Experience on various project phases ranging from Basic (Select/Study), FEED (Front End Engineering for Design), Detailed engineering, Experience while working in projects is as below but not limited... Read more

Experience on various project phases ranging from Basic (Select/Study), FEED (Front End Engineering for Design), Detailed engineering, Experience while working in projects is as below but not limited to: • Design and Detailed engineering • Preparation of detailed manufacturing/fabrication drawings • Preparation of Mechanical data sheets and specifications • Preparation of Material/purchase requisition • Technical bids evaluation, preparation/clarification of queries and selection of vendors. • Review of vendor documents/drawings • Obtaining cost estimate for the equipment. 25+ years of Industrial experience in the field of Petrochemicals, Refinery, Oil and Gas industry, Chemicals/ Fertilizer industries, and specialization in Mechanical Design and Detailing of Static and Package Equipment like Vessels, Tanks, Heat exchangers, Process Column, Ethanol Package, De-Salt Package, Sea Water Intake Package, Electro-Chlorination Package etc. Familiar with National and International, Codes & Standards like ASME, API, BS, IS, ANSI & NFPA, etc. Client Design Standards/ Specifications like, ADNOC, SHELL, ADMA, GASCO, TAKREER, ZADCO, BOROUGE, EIL, TOTAL, SAUDI ARAMCO, L&T, JACOB etc

I am a dynamic team spirited and performance driven engineering professional with 7+ years of comprehensive experience of Railway (Traction System for locomotives), Power & Energy industry sector with... Read more

I am a dynamic team spirited and performance driven engineering professional with 7+ years of comprehensive experience of Railway (Traction System for locomotives), Power & Energy industry sector with an extra-ordinary blend of leadership & manufacturing experience. Recognized for expertise in Design and Development of Electro-Mechanical Products, cost effective designs, increase efficiency. Creative problem solving and troubleshooting skills complemented by meticulous and creative detail to drawings and specifications. I have determination to consistently achieve success as a leader in all of the organizations that I have worked with in the past.

Mechanical Engineer (PMP®, C.Eng.) with 20+ years of experience in pressure equipment design, engineering simulations, inspection, and project management for oil & gas, petrochemical, and power sector... Read more

Mechanical Engineer (PMP®, C.Eng.) with 20+ years of experience in pressure equipment design, engineering simulations, inspection, and project management for oil & gas, petrochemical, and power sectors. Expert in ASME, TEMA, CSA B51, ABSA codes, and tools like ANSYS, COMPRESS, PV Elite, and AutoCAD. Currently leading CanPro Process Services Ltd. (APEGA-certified) in Edmonton as Director and Project Manager—handling engineering design reviews, compliance checks, client coordination, and simulations. Skilled in managing full project lifecycles with cross-functional teams. Past experience includes managing multimillion-dollar EPC projects at Linde Engineering (India & Germany), delivering major savings: $6M saved on Baytown Ethylene Cracker (USA) – awarded Best Employee $17M total savings via cost optimization and vendor standardization Delivered Rock Spring (Ammonia Plant), Point Comfort (ASU), Toboltz (PP Plant) 9 years at Larsen & Toubro as Design Engineer, Planner, and Supervisor. Worked on vessels and heat exchangers for KNPC, Saudi Aramco, Shell, and ExxonMobil. Recognized for innovative cost-saving solutions on clean fuel and gasification projects. Skills: Mechanical design & simulation Code compliance (ASME, CSA, ABSA) Vendor & project coordination Quality audits, site inspection Procurement, costing & planning AutoCAD, PV-Elite, ANSYS, SAP Education: B.E. in Production Engineering Gold Medal – Advanced Diploma in CAD/CAM Diploma in Fabrication Technology Certifications: PMP®, Chartered Engineer (India) CWB Welding Inspector, WHMIS-2015, CSTS-09 Certification in Contract Law (Germany)

I am a Mechanical & Static Equipment Design Engineer with 7+ years of experience in pressure vessels, heat exchangers, columns, and filtration/drying systems for pharmaceutical, chemical, and oil & ga... Read more

I am a Mechanical & Static Equipment Design Engineer with 7+ years of experience in pressure vessels, heat exchangers, columns, and filtration/drying systems for pharmaceutical, chemical, and oil & gas industries. In addition to static equipment, I bring strong 3D CAD product design skills (Autodesk Inventor, SolidWorks, AutoCAD) for sheet metal, machined parts, and assemblies. I work with international codes including ASME Section VIII, TEMA, EN 13445, AD 2000/PED, and AS 1210. I am highly proficient in Autodesk Inventor, SolidWorks (CSWA certified), PV Elite, Compress, and AutoCAD. I can help you with: 3D modeling and 2D fabrication drawings of pressure vessels, tanks, and process equipment General mechanical product design (sheet metal, machined parts, assemblies) GA drawings, welding symbols, GD&T, and BOMs Material selection and compliance with ASME, TEMA, and PED Design validation using FEA (ANSYS) and PV Elite Manufacturing documentation (MDR, Material Requisitions) I have collaborated with clients in the USA, Germany, France, Italy, and Australia, and I am comfortable working remotely across time zones. I deliver high-quality, manufacturable designs on time. I am open to hourly or fixed-price projects. Let's discuss your next project.

UK-based Mechanical Design Engineer with 4+ years of specialist experience in pressure vessel design, heat exchanger engineering, FEA simulation, and structural analysis for oil & gas, chemical, and m... Read more

UK-based Mechanical Design Engineer with 4+ years of specialist experience in pressure vessel design, heat exchanger engineering, FEA simulation, and structural analysis for oil & gas, chemical, and manufacturing clients. I deliver code-compliant engineering to ASME BPVC Section VIII (Div.1 & Div.2), PD 5500, AISC 360, and ASCE 7. Every deliverable — from design calculations and FEA reports to fabrication drawings — is produced to client-approval standard. What I offer on a per-project basis: • Pressure vessel & heat exchanger design (ASME / PD 5500) with PV Elite calculations • FEA using ANSYS — static structural, thermal, fatigue, modal • 3D CAD modelling and manufacturing drawings in SolidWorks 2023 • Structural skid, support & lifting lug design to AISC/ASCE • Pipe stress analysis and P&ID/PFD development • AVEVA E3D plant modelling I work remotely and accept fixed-price project briefs worldwide. Deliverables include calculation packages, marked-up drawings, FEA reports, and material specifications ready for client submission. CEng pathway (IMechE) in progress. Full availability for repeat project work.

Accomplished and results-driven Chemical Engineer, Project Management Professional with a consistent, successful history of approaching complex challenges with poise and logic and effectively managing... Read more

Accomplished and results-driven Chemical Engineer, Project Management Professional with a consistent, successful history of approaching complex challenges with poise and logic and effectively managing competing tasks simultaneously to ensure flawless execution of detailed projects. Progressive and analytical engineer committed to making continuous improvements in processes and procedures to enhance outcomes and meet organizational strategic goals. Producing exceptional collaborative business relationships with management, colleagues, and internal and external stakeholders, in both traditional and remote distributed environments.

I'm a Pressure Vessel & Heat Exchanger Design Engineer & Draftsman with an experience of 6 years. I'm working as a Design Engineer in a ASME BPVC U Stamp Certified company for more than 5 years. I'm... Read more

I'm a Pressure Vessel & Heat Exchanger Design Engineer & Draftsman with an experience of 6 years. I'm working as a Design Engineer in a ASME BPVC U Stamp Certified company for more than 5 years. I'm Experienced in designing Pressure Vessels as per ASME BPVC Section VIII Division I by using PV Elite or Manual Calculation and I can prepare Detailed Fabrication Drawing to the ASME Standards. And also, I'm Experienced in Designing & Preparation of Fabrication Drawing for Heat Exchangers in accordance with ASME (UHX) & TEMA Standards.

o Consulting Engineer o Thermal Engineer o Engineering Specialist o Designer o Inventor o Advanced Heat-Transfer Technologies o Advanced Brazing Technologies o 40 years experience o 3... Read more

o Consulting Engineer o Thermal Engineer o Engineering Specialist o Designer o Inventor o Advanced Heat-Transfer Technologies o Advanced Brazing Technologies o 40 years experience o 36+ countries o Leader of Composite Deposition (CD) aluminium particle-brazing development team o Member of international Cuprobraze® copper particle-brazing development team o Controlled Atmosphere Brazing (CAB) expert o Brazing expert on Cuprobraze® development project o HEAT-EXCHANGERS oo Consulting / design / rating / testing / manufacture oo Software development / research oo PHE/BPHE (design, software, big data analysis) oo Automotive - radiators, condensers, evaporators, oil-coolers, charge-air-coolers oo RHVAC - condensers, evaporators oo Finned-tube HE - air-blast heater/coolers oo Landfill-gas coolers - LP/HP oo Heavy industrial HE oo Mining - Elution systems - intercooler, heater oo Stationery gen-set coolers oo Petrochemical HE oo Modular shell-and-tube HE o HEAT-PUMPS oo Design / rating / testing / manufacture / software development / research oo Ultra-compact AWHP (air-to-water heat-pumps) oo Low-cost AWHP for global market o BRAZING SYSTEMS oo Consulting / process development / CAB furnace specialist / manufacturing / research oo ALUMINIUM ooo CD (Composite Deposition) technology ooo Particle-brazing technology ooo Fluxless brazing ooo Nocolok oo COPPER-BASED ooo Cuprobraze® (anneal-resistant copper fin – high strength-brass tube brazing) ooo Xbraze (anneal-resistant copper fin-copper tube brazing – in development)

14 years extensive experiences in design and construction of static equipment such as pressure vessels and heat exchangers in energy sector. A good knowledge of relevant codes and standards together w... Read more

14 years extensive experiences in design and construction of static equipment such as pressure vessels and heat exchangers in energy sector. A good knowledge of relevant codes and standards together with ability to use of required softwares to provide shop drawings from the basic design data.

Greetings from Montgolfier engineering We can support you on complete Structural detailing work for your Global projects. Our rates are economical and designs are optimized and are created by expe... Read more

Greetings from Montgolfier engineering We can support you on complete Structural detailing work for your Global projects. Our rates are economical and designs are optimized and are created by experienced designers. Kindly send us your requirement We are an Engineering Company based in Kochi, India, working with companies like Tata Projects Ltd, ABP Solutions Pvt Ltd , Tree engineering Solutions Pvt ltd . We have vast expertise in Civil /mechanical design and detailing services to support your PEB Structural / Warehouse /Industrial Structures projects.. We can give designs from scratch with material selection & detailed drawings as per client requirement . We are currently executing Orders for 2 Large Warehouse in Chennai, 1 In Kochi , 3 Nos from Qatar I am reaching out to explore opportunities to work with you if any possibilities from you . Why Montgolfier – •Very competitive pricing •Quick Turnaround time We can provide design & detailing service for : PEB /Warehouse /Civil Structural / tank / Silo designs Complete Offshore and On shore Structurals Heat exchanger design Complete material handling structural Pressure vessels – IBR /ASME/PESO Piping and skids Site office design We also provide Design services as given below: Mechanical • Fabrication and IFC dwg generations • AS Built • Structural calculation and design – stadd etabs , Offshore ans onshore • Piping calculation and design – ASME CODE • Pressure vessel calculation and design • Atmospheric tank design fabrication • Fuel and UL certified tank design and fabrication • Heavy structure design and fabrication • NDT services • Project management and execution services for oil and gas projects • Third party consultants for offshore and onshore jobs • Civil foundation calculations and design • DNV ,designs • Subsea and underwater designs

I am a product designer specializing in turning ideas into functional, manufacturable products. I design mechanical parts, electronic enclosures, and complete assemblies with a strong focus on precisi... Read more

I am a product designer specializing in turning ideas into functional, manufacturable products. I design mechanical parts, electronic enclosures, and complete assemblies with a strong focus on precision, durability, and real-world use. I work mainly with SolidWorks, creating clean parametric models, technical drawings, and production-ready files for 3D printing, CNC, and injection molding. My experience includes: • Product concept development • Mechanical and enclosure design • PCB-fit and electronics housing • Assembly optimization and tolerances • Technical drawings and BOMs I don’t just model parts — I think like an engineer, ensuring your product is easy to assemble, cost-effective, and reliable. If you need a designer who understands both design and manufacturing, I’m ready to help bring your product to life.

▪Total of 10 Years CAD Drafting Experience -10 years modeling & drafting with SolidWorks -9 years modeling & drafting with AUTOCAD Mechanical -2 years modeling & drafting with FastCAD ▪5 Years E... Read more

▪Total of 10 Years CAD Drafting Experience -10 years modeling & drafting with SolidWorks -9 years modeling & drafting with AUTOCAD Mechanical -2 years modeling & drafting with FastCAD ▪5 Years Experience in Flight Simulation Design -control panels -cockpit structure -EIC boxes -manufactured parts & assemblies -screen printed artwork ▪2 Years Experience in Heat Exchanger Design -shutters -main structure -manufactured parts & assemblies ▪2 Years Experience in Industrial Metal Cutting Bandsaw Design -wheel covers -roller tables -manufactured parts & assemblies

Being a Director of a Company - Techno-Chat Technical Institute Private limited and Backed by a team of experienced professionals, our strategic engineering services meet the needs of all types indust... Read more

Being a Director of a Company - Techno-Chat Technical Institute Private limited and Backed by a team of experienced professionals, our strategic engineering services meet the needs of all types industries like oil & gas, petrochemical , power, water treatment etc. ​ 1) Pressure Vessel & Heat exchanger Engineering 2) Solid works Modelling 3) ANSYS 4)AutoCAD 2D & 3D Drawing & Modeling 5) PV Elite 6) HTRI Please visit our website foe complete services we offer https://www.techno-chat.com/engineering-services