Hire the best freelance Electrical CAD Design expert designers for your company

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

Hi,I am Omar, a mechanical design engineer with expertise in engineering. I have strong skills in simulation and 3D design using CAD software (SolidWorks, Catia, AutoCAD, revit). I always strive to ac... Read more

Hi,I am Omar, a mechanical design engineer with expertise in engineering. I have strong skills in simulation and 3D design using CAD software (SolidWorks, Catia, AutoCAD, revit). I always strive to achieve excellence in my work by providing accurate and innovative mechanical design services. Thanks to my strong engineering and design background, I strive to achieve customer insights and deliver projects satisfactorily through effective and innovative solutions that enable me to provide the following services: - Industrial Design - Product Design - Prototype design -3D modeling (3D modeling, 3D rendering) -2D graphics (2D Drawing) - Create motion animation, exploded view Why do you have to choose me: - Experience in simulation and 3D modeling - Efficient and high-quality project delivery with fast delivery - Comprehensive design solutions and attention to detail - Creative solutions to solve problems - The most important is the professional communicating, focusing on the customer needs and satisfaction Thank you for visiting my personal page and seeing my work. I look forward to dealing with you. Greetings, Omar Miri

My name is Sultan Morbiwala, an aspiring inventor who loves to implement new ideas in the field of mechatronics & design. I am doing 2D/3D design for 2 year and have proficiency using CAD tools like S... Read more

My name is Sultan Morbiwala, an aspiring inventor who loves to implement new ideas in the field of mechatronics & design. I am doing 2D/3D design for 2 year and have proficiency using CAD tools like Solidworks for 3D modeling, keyshot for animation and rendering. I have sent my design to manufacturing using materials like steel, woods, aluminum and familiar with using 3D printer for prototyping. My secondary skill includes Electrical/PCB design and programming. My main value is my adaptability since I have diverse experience in different fields like Mechanical, Electronics & Computer Science. I can definitely help you to go from concept to final product

I am an Electrical engineer, having 7 years of experience in BIM technology. A strong hand on BIM MEP services in all segments of building structures like Residential, Commercial, Hospital, etc. By us... Read more

I am an Electrical engineer, having 7 years of experience in BIM technology. A strong hand on BIM MEP services in all segments of building structures like Residential, Commercial, Hospital, etc. By using this technology I can make a 3D model for Architecture and MEP services and can generate 2D output through REVIT software. Also can make 3D objects and do its rendering also in 3Ds max.

An Electrical Building Designer with Decade plus of experience in generating designs. I have good experience in electrical and Lighting Design & Calculations for Homes, Office Buildings , Schools and... Read more

An Electrical Building Designer with Decade plus of experience in generating designs. I have good experience in electrical and Lighting Design & Calculations for Homes, Office Buildings , Schools and Retail . I can do Electrical Services Drawings in 2d AutoCAD, Power Calculations IEC Standard. Scope of Services: Electrical lighting design Electrical Power design Electrical load calculation schedule Electrical schematic diagram Distribution Board Main Panel Cable and Panel size Single line diagram CCTV Smoke/Heat detectors Lightning Arrestor

I am a Mechanical Engineer with Product Design, Development, and Prototyping experience in Drone Start-up, Robotics, and Medical Devices Industry. My competence is Product Development with skills incl... Read more

I am a Mechanical Engineer with Product Design, Development, and Prototyping experience in Drone Start-up, Robotics, and Medical Devices Industry. My competence is Product Development with skills including Design Thinking, Analysis (Mechanical, Fluids, Thermal, Electrical), CAD design, Prototype Design (for 3D Printing, Laser Cutting, CNC, etc) up to Design for Manufacturing.

I am a Designer with more experience in substation building & industrial buildings. I am familiar with Autocad, Revit & sketch up user. Specialties: 3D Modeling Plan & sections Single Line Diagrams El... Read more

I am a Designer with more experience in substation building & industrial buildings. I am familiar with Autocad, Revit & sketch up user. Specialties: 3D Modeling Plan & sections Single Line Diagrams Electrical Substation layout & section.

CDEGS Software, Electrical Calculations, Electrical 2D & 3D CAD Works A Cumulative experience of 7.5 years in Electromagnetic Interference Studies on Pipelines and Design of Earthing & Lightning Prot... Read more

CDEGS Software, Electrical Calculations, Electrical 2D & 3D CAD Works A Cumulative experience of 7.5 years in Electromagnetic Interference Studies on Pipelines and Design of Earthing & Lightning Protection System of High, Medium and Low Voltage Systems. Available to support in Electrical CAD works 2D&3D and any type of electrical engineering related supports.

I'm using AutoCAD in creating electrical drafting for more than 5 years as part of my primary task as a project and maintenance supervisor in my previous job on a Food and beverage manufacturing plant... Read more

I'm using AutoCAD in creating electrical drafting for more than 5 years as part of my primary task as a project and maintenance supervisor in my previous job on a Food and beverage manufacturing plant. The 2D design has been my forte since I start drafting floor plans, electrical layouts (lighting & power), Single line, schematics, and riser diagrams. As an experienced draftsman, I am already familiar with most tools in AutoCAD, which increases my speed in drafting and finishing the work on time. For 3D modeling I use SolidWorks in creating lighting fixtures support, manhole cover and Utility box intended for fabrication and visualization of the part or unit.

I am an Electrical and Electronics engineer with 6 years of experience specializing in Power System. Extensive design experience in the field of Electrical Engineering, Low Voltage, Solar System, Ener... Read more

I am an Electrical and Electronics engineer with 6 years of experience specializing in Power System. Extensive design experience in the field of Electrical Engineering, Low Voltage, Solar System, Energy Conservation, LED Façade Lights Designing, Fire Protection & Security System including detailed layout incorporating CAD models. Whether it's existing building, or developing a new project from the early concept stage, I enjoy providing you with technical solutions that are suitably engineered for your needs to solve problems that come up during the design phase as well as during construction. I am highly proficient in AutoCad , Dialux, MS office. I design the projects which can best serve the need of our client in the best economical and efficient manner, rendering the optimum level of cost benefit and satisfaction. Electrical services: Calculation on basis of equipment load details. Structured Cable Design. Sizing of electrical equipment.(i.e.HT Panel, Transformer, D.G. Set, UPS, LT Panel, HT/LT cables, Switchgears). Sub–station layouts Earthing system design . SLD for power distribution scheme. Preparation of Lighting layout with required lux level. LV system design(Cctv, Telephone, Data , PA). Elevators & Escalators. Preparation of detail BOQ. Preparation Tender documentation & Estimation.

My specialty is creating detailed technical drawings, plans, and diagrams for MEP systems within buildings and structures with 15+ years of experience which plays a crucial role in the construction an... Read more

My specialty is creating detailed technical drawings, plans, and diagrams for MEP systems within buildings and structures with 15+ years of experience which plays a crucial role in the construction and engineering industry. It is my expertise to accurately represent mechanical, electrical, and plumbing components, ensuring efficiency, compliance with codes and regulations, and seamless integration with the overall design of the building. I used AutoCAD, Revit, and MEP-specific software. They can develop precise and comprehensive drawings that serve as blueprints for mechanical, electrical, and plumbing installations, repairs, and maintenance. Create detailed MEP system layout, dimensions, specifications, and connections drawings. Among them are HVAC, electrical wiring, lighting, plumbing, fire protection, and other essentials.

With 30 years of experience in robotics automation and engineering design, I bring my knowledge and expertise with me. I specialize in the fields of Medical Devices, Automotive and Injection Molding.

With 30 years of experience in robotics automation and engineering design, I bring my knowledge and expertise with me. I specialize in the fields of Medical Devices, Automotive and Injection Molding.

I am a dedicated Electrical Engineer with a Master’s in Embedded Systems, specializing in firmware development, PCB design, and complete IoT product engineering. From concept to market-ready product,... Read more

I am a dedicated Electrical Engineer with a Master’s in Embedded Systems, specializing in firmware development, PCB design, and complete IoT product engineering. From concept to market-ready product, I deliver robust embedded solutions that combine hardware, software, and intelligent connectivity. Core Expertise -> Microcontrollers & Embedded Systems: STM32, ESP32, TI Tiva, C2000, MSP430 (Texas Instruments), NXP LPC & i.MX RT, Nordic nRF52/nRF53, Microchip PIC32 & dsPIC, Raspberry Pi, and Arduino. -> Firmware Development: Embedded C/C++, RTOS, DMA, peripheral drivers, wireless stacks (BLE, Wi-Fi, LoRa, Zigbee). -> PCB Design & RF Hardware: Professional PCB layouts using Altium Designer, KiCad, Eagle, EasyEDA and Target. Specialized in RF, IoT, and high-speed boards. -> FPGA Development: Verilog/VHDL for signal processing, hardware acceleration, and high-performance digital systems. -> AI, Machine Learning & Deep Learning: Intelligent algorithms for edge devices, control, and data analysis. -> Robotics & Control: Robotic platforms, precision motor control (FOC, PID), and industrial automation. -> Biomedical Instrumentation: Embedded systems for healthcare and diagnostic devices. -> CAD & Mechanical: 3D CAD modeling for custom housings and production-ready enclosures. Industrial Automation: PLC, SCADA, HMI and DCS integration, including OPC UA/DA, Modbus, tag monitoring, remote commands and Windows-based control applications. Full Product Development Workflow From Idea → Prototype → Final Product System Architecture & Schematics Firmware Development (optimized embedded coding & drivers) PCB Design (multi-layer, RF, low-power, IoT-ready) AI/ML Integration (edge computing & analytics) IoT Connectivity (MQTT, APIs, BLE, Wi-Fi, LoRa, Zigbee) Web & Mobile App Development (real-time dashboards & control apps) Mechanical CAD (3D modeling & enclosures)

Over 16 years experience in electrical CAD design. Wiring diagrams, schematic control design and CAD. Lift industries, marine, defence

Over 16 years experience in electrical CAD design. Wiring diagrams, schematic control design and CAD. Lift industries, marine, defence

Cadeosys(CAD Expedite Outsourcing System) is a CAD and Bim Outsourcing Companies In India. We have the ability to give the best MEP Engineering Services with a high-quality result. For new constructio... Read more

Cadeosys(CAD Expedite Outsourcing System) is a CAD and Bim Outsourcing Companies In India. We have the ability to give the best MEP Engineering Services with a high-quality result. For new construction, renovations, and up-gradation of existing design services, we have a professional team of Engineers with comprehensive competence in Architecture, Structure, and MEP Design Services. From the tender stage onwards, we do a thorough drawing for building purposes under the supervision of an engineer. AEC Services , BIM Services, CAD Outsourcing Services, Engineering Services, Infrastructure Services, and Point Cloud Services are some of our primary services.Through our CAD and BIM knowledge, we provide total engineering support. Whatever your needs are, our team can create a high-quality design for you. https://cadeosys.com/

I design manufacturable, production-ready PCBs with a focus on power electronics — particularly DC-DC converter layouts, where getting the copper pours, thermal relief, and switching-loop geometry rig... Read more

I design manufacturable, production-ready PCBs with a focus on power electronics — particularly DC-DC converter layouts, where getting the copper pours, thermal relief, and switching-loop geometry right is the difference between a board that works on paper and one that works on the bench. With a few years of industry experience as a PCB designer, I can work in both KiCad and Altium Designer, from schematic capture through layout, Gerbers, and BOM handoff to manufacturing. What I can help with: General mixed digital-analog 2–8 layer board design Schematic capture and layout from your requirements or reference design Buck/boost converter layout — hot-loop minimization, current-carrying trace sizing, copper pour and thermal management Design-risk flagging before it becomes an expensive fab mistake

I am passionate about creating social and environmental change. I am inspired by solar energy solutions, and committed to sustainability. I want to facilitate positive change in our world. I've worked... Read more

I am passionate about creating social and environmental change. I am inspired by solar energy solutions, and committed to sustainability. I want to facilitate positive change in our world. I've worked as a solar designer for the last ten years. I've created hundreds of code compliant electrical, civil, architectural and structural plan sets. I have experience designing in 2D and 3D AutoCAD software. I have an Associate of Applied Science degree and I am a certified Permaculture designer.

CAREER PROFILE/SKILLS: • 6 years of Professional experience in Electrical design and Project execution. • Managing, and supervising Electrical, MEP, HVAC, LV, and ELV projects withi... Read more

CAREER PROFILE/SKILLS: • 6 years of Professional experience in Electrical design and Project execution. • Managing, and supervising Electrical, MEP, HVAC, LV, and ELV projects within UAE. • Experienced in Handling Multiple sites, Teams, Manpower, and Materials Procurement. • Conducting DEWA Site Inspections, Electrical Testing and Commissioning as per standards. • Preparing Load Schedules, BOQ, Project Reports, Single Line Diagrams and shop drawing • Developing Electrical Designs using AutoCAD, DIALUX, and other engineering software’s. • Familiar with DEWA, SEWA, FEWA, Emirates and International Standards. • Certified Engineer by Pakistan Engineering Council.

Electrical Design Engineer and Revit MEP / BIM Modeler with 6+ years of cumulative experience across the UAE, KSA, and Egypt. I produce coordinated BIM models, ELV shop drawings, and lighting designs... Read more

Electrical Design Engineer and Revit MEP / BIM Modeler with 6+ years of cumulative experience across the UAE, KSA, and Egypt. I produce coordinated BIM models, ELV shop drawings, and lighting designs that move cleanly from consultant review to site execution. Services I deliver: • Revit MEP modeling — electrical, lighting, ELV systems, panel schedules • Custom Revit families (FA, CCTV, ACS, PAVA, SC, MC devices) • ELV shop drawings — Fire Alarm, CCTV, Access Control, PA & Voice Alarm, Structured Cabling, Master Clock • LV power distribution, load schedules, feeder sizing, earthing layouts • DIALux lighting design and calculations • Coordination drawings, clash detection, sheet sets • RFIs, material submittals, technical documentation Recent projects: • Burjeel Day Care Surgery Center, Al Khobar KSA — full ELV shop drawings (6 systems) with RBCO • Pioneer of Experts, Dubai — back-office MEP design for private villas, Islamic World District, MAPA Labour Accommodation, Travco Jaz Aqua Marine • EMG Cairo — King Salman Park, King Fahd Hospital, Yem El Mina, Nemat El Madina, El Shoheda Mall • Eterna Hospital (200+ beds) — MV/LV distribution, 99% uptime • 5+ MV installation sites — transformers, generators, RMUs Sectors: Healthcare · Commercial · Residential · Industrial · Hospitality Software: AutoCAD · Revit MEP · DIALux · Navisworks · PowerWorld Certifications: Kaitech BIM Diploma · Classic Control · PLC Basics · Motor & Drive (HA Consulting Group) Languages: Arabic (native), English (professional), German (basic) I came up through MV site work before moving into design, so my drawings are practical and get built without rework. Available for remote, hybrid, or relocation roles — UAE, KSA, and international.

I am a professional Mechanical, Electrical, PCB, and Civil CAD Design Engineer with extensive experience delivering high-quality engineering designs, manufacturing drawings, and 3D models for clients... Read more

I am a professional Mechanical, Electrical, PCB, and Civil CAD Design Engineer with extensive experience delivering high-quality engineering designs, manufacturing drawings, and 3D models for clients across various industries. I specialize in transforming concepts, sketches, PDFs, and hand drawings into precise CAD models and production-ready documentation. My expertise includes 3D CAD modeling, product design, mechanical design, sheet metal design, electrical drafting, PCB layout, BIM modeling, civil drafting, and engineering documentation. Whether you need a new product designed from scratch or modifications to an existing design, I provide accurate, efficient, and cost-effective solutions. My Services Mechanical CAD Design 3D CAD Modeling Product Design & Development Machine Design Sheet Metal Design Weldment Design Injection Mold Ready Parts Plastic Part Design Reverse Engineering Manufacturing Drawings Assembly Drawings Technical Drawings GD&T (Geometric Dimensioning & Tolerancing) Mechanical Drafting Electrical CAD Design Electrical Schematics Panel Layout Design Wiring Diagrams PCB Design & PCB Layout Circuit Board Drafting Civil Drafting Structural Drafting Architectural Drafting BIM Modeling Revit Modeling Construction Drawings 2D to 3D Conversion PDF to CAD Conversion DWG/DXF File Creation CAD File Conversion Engineering Documentation CAD Drafting & Detailing Software Expertise SolidWorks AutoCAD Autodesk Revit Fusion 360 Inventor Altium Designer KiCad Autodesk Civil 3D SketchUp Bluebeam Microsoft Office Why Work With Me? Accurate and production-ready CAD models Fast turnaround time Clear communication Industry-standard engineering practices Attention to detail High-quality deliverables Client satisfaction focused Mechanical CAD Design, CAD Designer, CAD Engineer, Mechanical Engineer, Product Design, Product Development, 3D CAD Modeling, SolidWorks Designer, AutoCAD Drafting, Revit BIM, BIM Modeling, Civil CAD Designer, Structural Drafting, Electrical CAD, Electrical Drafting, PCB Design, PCB Layout, PCB Designer, CAD Drafting, Engineering Drawings, Manufacturing Drawings, Assembly Drawings, Machine Design, Sheet Metal Design, Weldment Design, Reverse Engineering, Technical Drawings, GD&T, Injection Mold Design, Plastic Part Design, Industrial Design, Prototype Design, 2D Drafting, 3D Modeling, PDF to CAD, DWG, DXF, STEP, STL, CAD Conversion, Construction Drawings, Shop Drawings, Fabrication Drawings, HVAC Drafting, MEP Drafting, SolidWorks Expert, AutoCAD Expert, Revit Expert, CAD Freelancer, Design for Manufacturing (DFM), Design for Assembly (DFA), CAD Services, Engineering Design, Engineering Consultant. Whether you're a startup, manufacturer, architect, contractor, engineering firm, or product developer, I'm committed to delivering professional CAD solutions that meet your project requirements on time and within budget.

Product design from concept to manufacturing. Experience spans from electronic to electromechanical design for products for many markets: Consumer, medical, aerospace, electric vehicles.

Product design from concept to manufacturing. Experience spans from electronic to electromechanical design for products for many markets: Consumer, medical, aerospace, electric vehicles.

I am an exceptionally talented, multi-disciplined, creative and resourceful Mechanical Design Engineer with more than 15 years of experience in a design and engineering environment. The q... Read more

I am an exceptionally talented, multi-disciplined, creative and resourceful Mechanical Design Engineer with more than 15 years of experience in a design and engineering environment. The qualifications and professional knowledge I can bring to an organization follows: • An N3 Electrical qualification coupled with a progressive qualification in Mechanical Engineering. • Profound experience in Mechanical engineering & design with a multi-disciplined aptitude. • Machine design experience, as well as FEA (Finite Element Analysis and Engineering calculations). • Previous experience in a defense and aerospace environment – Reutech Defense Industries/ Reutech Communications plus Bombardier Transportation and Aerospace: Gautrain Rapid Rail Link Project. • Knowledge and experience in writing manuals and technical documents. • Managed engineering design office for over 5 years, size 6 to 10 team members. • Possess strong CAD techniques including proficient skill and knowledge of various software packages essential for producing 2 & 3 dimensional, functional designs. • Pro Engineer, Solid Edge, Solid Works, AutoCad and recently Catia V5, now Fusion 360 and Adobe Illustrator. • Deep knowledge of design techniques, tools, and principles involved in production of precision technical designs, drawings and models. • Profound knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. • Good knowledge of Mechanical Engineering Drawing, Mechanical engineering Design (Cad drawings and Cad models, interpretation and good application of applicable draughting standards, ISO standards, BS 8888, Calculations, processes and material selection essential for designing). • Electro-technology, Mechanics, Fluid Mechanics, Strength of materials, Mechanics of Machines, Thermodynamics. Mechanical Manufacturing 1 and 2 with Mechanical Engineering Design (Manufacturing processes, geometric tolerance, weld symbols, fits and limits and surface finishes, material selection…etc), • In-depth ability to read and comprehend written instructions, with excellent communication skills. Highlighted experiences: I was employed as Senior Designer for reputable international Transportation and Aerospace company BOMBARDIER, benchmarking the Gautrain Rapid Rail Link Project, which has propelled South Africa into a new era of technology and infrastructure. Now, as Senior Mechanical Engineer (CAD), designing and production of new rolling stock for South Africa: PRASA’s R51 billion Rolling Stock Project, the biggest project in the world. My major functions and job responsibilities at Bombardier and previous companies and industries include: Electrical and Mechanical (Electro-mechanical) design: • Initial conception, design & analysis, manufacturing, verification, updating, modifications & re-issuing of designs and drawings for manufacturing, to quality control and configuration management, • Checker (Chief) – Measurable Accuracy and exceedingly Detail Orientated. • Measurable success with achieving multi-million rand milestones and deadlines. • Project Management. core competencies • Conceptual Designs and Product Development: recently designed and developed emergency ladder for Rolling stock. New Design and unique globally. Was met with great reviews from Prasa, calling it the “Rolls Royce” of ladders for trains. • Knowledge & skill in aircraft design and mechanics, computer literacy, good written communication, initiative, innovative, highly analytical. • Liaising with clients, training suppliers and contractors. • Continuously achieving courses in Mechanical Engineering working toward Master Qualification in Aeronautical/ Mechanical Engineering. • Attention to detail. • Pro-active approach to problems. • Ability to work with cross-functional teams. • Resilience and focus on project outputs especially schedule and quality. • Interest in developing technical skills. • Perseverance in a design environment where multiple design iterations are likely. • Able to keep to planned schedules and be very particular. • Good communication skills. • Integrity and honesty. I believe that my experience and skills are invaluable. If you are looking for a dependable, results-oriented professional with a solid performance track, I am that person

Twenty-five years in Electrical, Mechanical, HVAC, I&C, Civil and Architectural Drafting and Electrical Design for a variety of industrial and commercial facilities including: Microelectronics, Restau... Read more

Twenty-five years in Electrical, Mechanical, HVAC, I&C, Civil and Architectural Drafting and Electrical Design for a variety of industrial and commercial facilities including: Microelectronics, Restaurant/Kitchen design, Hospitals, Colleges, off-shore drilling platforms, Office buildings, banks and fitness centers. Independent Electrical Designer with various engineering firms. Previous to that, owned own business in which I supervised several employees. Business ownership has afforded experience in Marketing, Project Management of teams and offices, Project Coordination and QC, business management, personnel management. I have punch-listed and provided extensive as-built’s in all kinds of buildings and environments. Willing and able to work independently. Proficient in both AutoCAD and MicroStation.

Senior Electrical CAD Designer with 18 years of experience in electrical drafting, fire alarm system layouts, CCTV design, and AutoCAD documentation. Specialized in U.S. fire alarm design standards i... Read more

Senior Electrical CAD Designer with 18 years of experience in electrical drafting, fire alarm system layouts, CCTV design, and AutoCAD documentation. Specialized in U.S. fire alarm design standards including NFPA 72 compliant layouts, device placement, riser diagrams, battery calculations, voltage drop calculations, and shop drawings. Experienced in preparing: • Fire Alarm Layouts • Electrical Power & Lighting Plans • CCTV Layouts • As-Fitted Drawings • Low Voltage Systems • AutoCAD 2D Drafting Successfully completed projects for U.S. and international clients through remote freelance work.

Electrical project draughtsman with 2.5 years of experience in electrical design, knowledge in AutoCAD Electrical, Trace Software. Experience in various multinational projects of India & abroad like V... Read more

Electrical project draughtsman with 2.5 years of experience in electrical design, knowledge in AutoCAD Electrical, Trace Software. Experience in various multinational projects of India & abroad like Veolia, SNCF (France Metro), France highway electrification projects etc. Looking forward to executing your projects with utmost expertise from my side.

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road... Read more

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road to become engineer during my studies at Warsaw University of Technology, faculty of Mechatronics. Studies in Poland are not very practical and I always believed that technical experience is priceless for someone who want to become a professional, and most of all, good engineer so I have decided to start work as a Multi Skilled Maintenance Engineer at MPack where I was responsible for electrical and mechanical maintenance of plant machinery. In September 2011 I have progressed to Service Engineer i SZUGAJEW AGRI. As a service Engineer I was responsible for installation of automated lines for grading and packaging of vegetables and fruits. That job involved working with engineering drawings, electrical and mechanical assembly, start ups and running tests of all the installed machines. After that I have started work for CNS Soultions where I have become expert in using Solid Works 3D and Solid Works Electrical. Since I moved to UK on 7th of January 2015 I have started to work as multi skilled designee engineer. My First Engineering job in UK was in IONEX SG where I was responsible for designing container water treatment installation to remove nitrates from drinking water. (Contract - making drawings of 3D assemblies and part models, 2D documentation, pneumatic installations, selecting components, electrical routing, support project from the beginning to the end) Next, I have started working as electro-mechanical engineer in OPTEK SYSTEMS where I was responsible for designing of specialized laser cutting machinery. (Permanent - full electrical design, making drawings of 3D assemblies and part models, 2D documentation, designing safety systems for laboratories, redesigning of the existing laboratories, engineering support for wire man work, start up of machinery, etc. - 3.5 years) Currently for more than 1 year I am on contract in RACE (Remote Applications in Challenging Environment) United Kingdom Atomic Energy Authority where I am working as System Engineer. I am responsible for designing of Safety Systems, LV distribution, supporting of electrical control design, cable tray layouts drawings, cabinet layouts drawing, etc. Curently I am working as a contractor and my contract is 37.5h/ week I am managing to finish my hours in 3.5 days a week so I have a lot of free time now. That is why I have decided to joint that site and look for more opportunities to use time more effective. I hope someone will be interested in my personal skills. Best Regards Michal Panus

Vice president of an electrical engineering startup. able to do electrical engineering as well as cad design, or drafting projects.

Vice president of an electrical engineering startup. able to do electrical engineering as well as cad design, or drafting projects.