Hire the best freelance 3D Analysis and Design expert designers for your company

My name is Mack and I am a Mechanical Design professional located in Colorado, USA. I specialize in lightweight component design for Robotics and Autonomous Systems as well as hardware design for Avia... Read more

My name is Mack and I am a Mechanical Design professional located in Colorado, USA. I specialize in lightweight component design for Robotics and Autonomous Systems as well as hardware design for Aviation and Outdoor Extreme Sports. I also operate a CNC Machine shop and test facility. We specialize in nonferrous metals. As a certificated Mechanical Designer, I am not only an expert in 3D Modeling/CAD, but I am also well versed in Drafting Standards, CNC Manufacturing Standards, Geometric dimensioning & Tolerancing(GD&T) and I implement Quality control processes in my design workflow. This saves on time and stress as your project continues. I am open to most projects, but keep in mind it is mutually beneficial if I work on projects I have a deep interest in. I have worked on projects from Offroad race trucks to Drones and robots for the film industry. My field of continued study is mostly in the realm of lightweight, mechanical components for Robotics and drones. However, my experience is far-reaching and my knowledge gained in the industry has numerous applications. I typically like to do a short discovery session to see if I can be useful on your project.

Living in a world of 3D Modelling and Engineering, always ready to take up new opportunities and challenges. Got an equal share of theoretical and practical experience in designing and fabrication.

Living in a world of 3D Modelling and Engineering, always ready to take up new opportunities and challenges. Got an equal share of theoretical and practical experience in designing and fabrication.

A professional Mechanical Engineer with a skill set of All 2D and 3D modelling softwares like Autocad, ProE ,NX-CAD, Catia, Creo and Solidworks.

A professional Mechanical Engineer with a skill set of All 2D and 3D modelling softwares like Autocad, ProE ,NX-CAD, Catia, Creo and Solidworks.

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

Expert Mechanical Engineer with 6+ years of experience offering end-to-end design and engineering solutions. I provide high-precision technical assets tailored to your project requirements. -Advanced... Read more

Expert Mechanical Engineer with 6+ years of experience offering end-to-end design and engineering solutions. I provide high-precision technical assets tailored to your project requirements. -Advanced CAD Modeling: 3D parts and complex assemblies using CATIA V5, PTC Creo, SolidWorks, and Inventor. -Engineering Analysis: Detailed Finite Element Analysis (FEA/FEM) to ensure structural safety and performance. -Design for Manufacturing (DFM): Specialized knowledge in CNC programming (Milling, Lathe, Laser, Bending) and material selection to ensure cost-effective production. -Technical Documentation: Comprehensive 2D drafting, GD&T, and 3D animations for assembly or marketing.

I am a mechanical design engineer , and I use solidworks to help people bring their ides to reality . I have an engineering degree in biomedical engineering from UM6SS in 2020 , and since them I have... Read more

I am a mechanical design engineer , and I use solidworks to help people bring their ides to reality . I have an engineering degree in biomedical engineering from UM6SS in 2020 , and since them I have worked exclusively as a mechanical design engineer. and I have fond my passion in : - 3D modelling - 3D rendering - detailed 2d technical drawing - stress simulation analysis -topology optimisation and more

I am professional civil engineer and want to use our skills in the field of designing, I love to design 3D models and to make the Rendering and walkthrough of the models

I am professional civil engineer and want to use our skills in the field of designing, I love to design 3D models and to make the Rendering and walkthrough of the models

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in... Read more

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in love to design the concept base models and is always ready to bring creativity in the design out of the way. A guy who is ready to work with company to solve not only to solve the design problems but will bring the creativity in the design through economically as well as the safety point of view. I'll provide you the complete assistance in the FEA analysis in ANSYS workbench under static structural and transient modules of the ANSYS Workbench. I have done FEA analysis on the Cantilever beam under 6 DOF and also on springs for there responses as well as the fundamental frequencies associated with them and also available to do FEA analysis anytime you need me. I have done the FEA of the Spar Design of the Airplane with the beam, jigs and ribs i have lot of work and i can share it as well with the right person.

Worked as design engineer in UAV startup company. Modelled (using Solidworks) and analysed (using Ansys) the parts andthe vehicle as whole.

Worked as design engineer in UAV startup company. Modelled (using Solidworks) and analysed (using Ansys) the parts andthe vehicle as whole.

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

Hi, I am a Design & Production "Mechanical" Engineer,I’ve been working as a CAD/CAM/CAE Expert since 2015. I have a master’s degree in Designing and Production of machines. Now, I am studying master i... Read more

Hi, I am a Design & Production "Mechanical" Engineer,I’ve been working as a CAD/CAM/CAE Expert since 2015. I have a master’s degree in Designing and Production of machines. Now, I am studying master in Robotics and Computer vision. I Work With Autodesk Fusion360,Inventor,Solidworks,Ansys,Catia For Designing 3D models , Render,Test,Analyze the Product and Implement Mathematical Models to help understanding the Designing and Construction with MatLab and Python. I’ve worked in three major industrial companies, Made a lot of Projects Such as Robots, CNC machines, and industrial equipment. For example, I have designed mechanical models and implementation stages of production for many Pressing, Molding, Forming, Fixtures & Jaw, Lathes, Drillers, and Milling Machines. I participated in the design of these machines from the draft and tested them on analysis programs (such as ANSYS, Autodesk Nastran, ABAQUS, COMSOL, and many other applications), and conducted many experiments and tests to know the changes that would occur to the design such as (stress analysis, vibration analysis, etc.) And the use of Matlab and Python to applying all possible analysis methods even to the most complex combinations and mechanisms.

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

Hello, My name is Nizamuddin Shaikh. I am a professional Design Engineer having more than 4 years of experience in Automotive and Industrial products designing. In addition of designing, I do myself F... Read more

Hello, My name is Nizamuddin Shaikh. I am a professional Design Engineer having more than 4 years of experience in Automotive and Industrial products designing. In addition of designing, I do myself FEA to check existing design and provide results in form of proper reports. Which designing tools I use? Generally I can do 3d modeling, Engineer drawings, BoM, Creation of part families, Surfacing, etc. I use mainly Solidworks & Creo. And for Finite element analysis, I do steady structural analysis in ANSYS Workbench. So, Tools I use are: *Creo *Solidworks *ANSYS And file extensions I deal with are: *stl (3d printing) *dxf ((CNC Laser Cutting) *step (3D CAD model - runs in all CAD software) *obj (3d CAD model) *dwg (2d drawing) *iges (3d CAD model - runs in all CAD software) *prt (3d CAD model - Creo files) *sldprt (3d CAD model - Solidworks files) What is important to me? Satisfaction of clients is my priority on this platform. I am capable because I am confident on my skills. I look forward to assist you in bringing your imagination into reality. Thanks for your precious time.

I am a mechanical engineer. I have experience in many areas such as : robotics, automatic guided vehicles, unmanned ground vehicles, remote control units,medical devices, different manufacturing techn... Read more

I am a mechanical engineer. I have experience in many areas such as : robotics, automatic guided vehicles, unmanned ground vehicles, remote control units,medical devices, different manufacturing techniques, composites materials, electronic hub motors casign designs, clean energy, mold design, 3d printer. I have done many projects in that areas since I started to university and after my graduation. I worked some robotics and mechatronics companies while at universty as a part time after graduation full time. I have designed and produced prototype and final products. I am ready to work from your sketches, descriptions, drawings or images on anything from idea to concept to details. Speciality ; * Mechanical Design * 3D modeling * Manufacturing drawings * Machine design * Sheet metal design * Surface design * Mold design * Product Design * Mechanisms Softwares : * Solidworks (2D/3D) * Catia * Ansys * 3ds-max * Keycreator * Keyshot

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a... Read more

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a Professor of Structural Engineering. I am licensed as a Professional Engineer(PE). I am ready to stamp the drawings and calculation sheets with my USA PE stamp if needed. I have extensive experience +25 years of experience including the structural design and analysis of multi-story buildings using structural steel, reinforced concrete, post-tensioned and pre-stressed concrete, deep foundations, and structural masonry. I provided structural forensic studies and structural damage assessments throughout many locations around the world. I served as a credible expert witness and he analyzed and evaluated the cause of failures in a wide variety of structures, such as bridges, buildings, industrial structures, and metro stations under different extreme loading conditions. I am also registered as a structural consultant in the field of seismic assessment of existing buildings at the Applied Technology Council(ATC) of FEMA in California, USA. I work with my professional staff engineers who are into: 1. Excellent complete structural design competence for mainly reinforced concrete, steel, composite & and wooden structures; 2. In-depth knowledge of structural and civil codes (US & European Codes & Standards). 3. Assessment and evaluation the structural safety of the existing buildings; 4. Retrofitting design of un safe structures 5. Prepare the required studies and reports for repair, and strengthening of structures; and 6. Introducing others works related to structural engineering. We are using the most reliable computer software and comply with international codes and local standards, Please contact us for more details or any job inquiry you might have. We are professional, trustworthy, and reliable and offer quality service experience and a quick turn. Your prompt response will be highly appreciated. Note: We offer all engineering services at very competitive and special prices. Thanks & Regards, Structural Engineering Pioneers Bureau, SEPB

Mechanical Engineer with expertiese in(CAD-FEA-CFD) SolidWorks- Autodesk Fusion360- DS Catia V5- Ansys Mechanical Workbench

Mechanical Engineer with expertiese in(CAD-FEA-CFD) SolidWorks- Autodesk Fusion360- DS Catia V5- Ansys Mechanical Workbench

I am a Civil Engineer specializing in building design and construction ( 6years experience). I also have a Masters degree in the Environmental Design of Buildings (3 years experience). I am currently... Read more

I am a Civil Engineer specializing in building design and construction ( 6years experience). I also have a Masters degree in the Environmental Design of Buildings (3 years experience). I am currently teaching Civil Engineering at Tvm.project India. My skills include; structural design, environmental design of buildings including energy modeling, CAD and 3d modeling, precast concrete structure design, residential design, and research in green building techniques. I have experience using the following software; Autocad, Autocad Architecture, Revit, 3D Studio, Sketchup, Photoshop, Autodesk Ecotect, Open Studio, RetScreen, Hot2000, Green Building Studio, Microsoft Office. I look forward to discussing your project needs

I am an architect specialised in parametric designs I also design products and have experience with animation

I am an architect specialised in parametric designs I also design products and have experience with animation

An innovative, creative, and talented design engineer with a proven track record in learning research, analysis and design skills since graduation with a mechanical engineering degree; I provide ideas... Read more

An innovative, creative, and talented design engineer with a proven track record in learning research, analysis and design skills since graduation with a mechanical engineering degree; I provide ideas effectively and able to help others; skilled in engineering design programs (CAD) and a number of technical packages. My goal and passion always during the implementation and design of engineering ideas is not only an implementation project in a satisfactory manner, but also in a well-done way that exceeds the customer's perception because my goal always and ever is to make my clients happy. I work as a mechanical design engineer (freelancer) and offer the following services: - 3D Modeling/ 3D Rendering/ 3D Printing. - 2D Drawing. - Industrial Design/ Product Design. - Reverse Engineering. I look forward to doing business with you in the near future, and I will be very pleased if you see my portfolio. Best wishes, Eng. Mohammed Bushara

We are a civil engineering studio "Krasteff and Aykoff Engineering" Ltd. We are situated in Bulgaria and we are engaged in the design of residential and administrative buildings. Our specialty is re... Read more

We are a civil engineering studio "Krasteff and Aykoff Engineering" Ltd. We are situated in Bulgaria and we are engaged in the design of residential and administrative buildings. Our specialty is reinforced concrete structures. The team consists of: Dipl. Eng. Todor Krastev - 6 years as a civil engineer Dipl. Eng. Kristian Aykov - 5 years as a civil engineer We develop our projects using BIM modeling in REVIT environment .This helps us with project coordination, reduces the risk of errors, eases the workflow and reduces the amount of work. We can offer you: -FULL 3D structural model of the building -Reinforcement of structural elements in REVIT - slabs,stairs,wall and columns -Structural shop drawings using both Revit and AutoCAD -Full material take off - based on the model -Statics and Dynamics using ETABS and ROBOT STRUCTURAL ANALYSIS Our company also offers consulting services in BIM design for structural engineers. We excel at using Dynamo based scripts to automate the process of the structural engineer and REVIT design.You can see my linkedin page for more references about dynamo scripts. More information on the style of work and some of the projects we have worked on through the years can be found in our portfolio: https://www.slideshare.net/KristianAykov/krasteff-aykoff-engineering

Hi, I’m Oluwaseun, A Professional SolidWorks Expert and Mechatronics Engineer with a strong background in 3D modeling, product design, and photorealistic rendering. I specialize in developing function... Read more

Hi, I’m Oluwaseun, A Professional SolidWorks Expert and Mechatronics Engineer with a strong background in 3D modeling, product design, and photorealistic rendering. I specialize in developing functional, manufacturable designs for consumer products, industrial parts, and mechanical systems. With over 5 years of experience, I’ve worked with startups, engineers, and entrepreneurs to turn ideas into reality, whether for prototyping, manufacturing, or crowdfunding presentations. Key Skills: 3D CAD modeling (SolidWorks, Fusion 360) Product design & development Mechanical assemblies High-quality rendering & visualization Industrial and consumer product design Sheet metal, plastic, and machined part modeling Let’s bring your product to life. I’m ready to work with you on your next idea, feel free to send a message!

I am a mechanical engineer and I am the designer of the formula student car. I design and analyze any parts on Solidworks.

I am a mechanical engineer and I am the designer of the formula student car. I design and analyze any parts on Solidworks.

I have 5 +year of experience in design and development of Automotie and aviation parts. Also I have experience of special purpose machine design .I can design product from scratch. I am working in avi... Read more

I have 5 +year of experience in design and development of Automotie and aviation parts. Also I have experience of special purpose machine design .I can design product from scratch. I am working in aviation industry. I can work on design tool like CATIA Creo Solidworks and NX

hello I work as a freelance 3d. I can help you do work 3d. there have been many local 3d projects that I created. I worked dearly meticulously. I can do 3d modeling and make 3d,2d animations and assor... Read more

hello I work as a freelance 3d. I can help you do work 3d. there have been many local 3d projects that I created. I worked dearly meticulously. I can do 3d modeling and make 3d,2d animations and assorted about 3d.

Senior Mechanical Design Engineer with 17+ years of experience developing mechanical components, assemblies and industrial equipment for energy and high-reliability engineering environments. Speciali... Read more

Senior Mechanical Design Engineer with 17+ years of experience developing mechanical components, assemblies and industrial equipment for energy and high-reliability engineering environments. Specialised in SolidWorks 3D CAD modelling, parametric part design, complex assemblies, and production-ready engineering drawings with GD&T. I support clients with the development of mechanical designs from concept through to manufacturing documentation including: • 3D CAD modelling and parametric part design • Assembly design and exploded views • Detailed manufacturing drawings with GD&T • BOM development and engineering documentation • 2D drawing to 3D model conversion • Reverse engineering from drawings or images • Design for manufacturability (DFM) I have delivered engineering solutions for projects across the energy, subsea, drilling and nuclear industries, producing robust and manufacturing-ready designs to professional engineering standards. Available for freelance mechanical design, CAD modelling and engineering documentation projects.

I'm a design engineer skillful at using AutoCAD, SolidWorks, Ansys for different aspects of the design. Having experience in using these softwares, I am now showcasing my skills to you.

I'm a design engineer skillful at using AutoCAD, SolidWorks, Ansys for different aspects of the design. Having experience in using these softwares, I am now showcasing my skills to you.