Hire the best freelance Workshop Drawing expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Ph.D., structural engineer

Ph.D., structural engineer

Freelance Designer - Architectural Design - Planning - Autocad Drafting - 3D Modeling, - 3D Visualitation, - Concept Design, - Product Design, - Rendering,

Freelance Designer - Architectural Design - Planning - Autocad Drafting - 3D Modeling, - 3D Visualitation, - Concept Design, - Product Design, - Rendering,

I am Shady El-Shafie, i was born in Saudi Arabia, but i am Egyptian. I studied Architecture at Arab Academy for Science and Technology and graduated with GPA (2.6). I am working as a Site Architect wi... Read more

I am Shady El-Shafie, i was born in Saudi Arabia, but i am Egyptian. I studied Architecture at Arab Academy for Science and Technology and graduated with GPA (2.6). I am working as a Site Architect with multiple tasks to handle; starting from execution phase going through B.O.Q, contractors and sub-contractors contracts and their scope of work beside the Architectural Design and Working Drawings using Autocad. I am also a good self-learner person, as i learned my self how to work as a freelancing translator (Arabic and English). Now-days, i am looking forward to improve my abilities in working with 3Ds-max, Revit, Photoshop and sketch-up, beside learning a new Language.

- I offer 3D CAD modeling and professional quality drawings for manufacturing. - 2D to 3D CAD service -Steel Detailing - sheet Metal design Manufacturing Engineer in Prefabrication Department ( Sh... Read more

- I offer 3D CAD modeling and professional quality drawings for manufacturing. - 2D to 3D CAD service -Steel Detailing - sheet Metal design Manufacturing Engineer in Prefabrication Department ( Sheet Metal , Heavy Plate work and steel structure )at a Market Leader in Industrial project Manufacturer company - 2D, 3D Modeling and CNC programing

 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fan... Read more

 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fanuc, Siemmen, Heidenhain... - Machine: Hass, Fidia, Makino, Matsuura... - Material: Aluminium, titanium, plastic... • 2D drafting • Shop document • Verify program • Fist article sheet • Maintenance old program, optimize for production  2009– 2011: CAD/CAM/CNC staff at International Corporation Trung Dung • 3D modeling from 2D drawing, sketch, picture, old model • CNC programming • Set up and operate • Inspection part

I am an expert in AUTOCAD Building Design & 2D Drawing works,Talented in usage of all Other Microsoft programs; such as MS Word, MS Excel, MS Powerpoint .

I am an expert in AUTOCAD Building Design & 2D Drawing works,Talented in usage of all Other Microsoft programs; such as MS Word, MS Excel, MS Powerpoint .

I am an experienced exhibit designer working in the design field for over fifteen years. I recently worked as Design Director with Exponents in San Diego for seven years. I have created original modul... Read more

I am an experienced exhibit designer working in the design field for over fifteen years. I recently worked as Design Director with Exponents in San Diego for seven years. I have created original modular designs as well as custom large scaled booth designs. I have also designed high-end custom furniture for a number of architects and interior designers whose clients required new and innovative. I am able to offer you experience as well as a love of current and future trends in our ever changing industry.

I am a mechanical design engineer who is currently involved in innovative product development providing support on hardware and mechanical aspects. I have extensive manufacturing experience in metalw... Read more

I am a mechanical design engineer who is currently involved in innovative product development providing support on hardware and mechanical aspects. I have extensive manufacturing experience in metalworking manufacturing industry. Additionally I am have also woodworking, 3D printing, injection molding and laser cladding manufacturing processes. I am an expert Solidworks, Autodesk inventor, Rhino and Google Sketchup user. In addition I have some experience in using Catia v5. I am also proficient in performing finite element method analysis for structural as well as thermomechanical steady-state and transient analysis in various FEM software packages such as Ansys and Comsol multiphysics . My professional day-to-day activity involves working with the following manufacturing processes: sheet metal/weldment profile material CNC laser cutting, CNC bending, rolling, CNC-milling, CNC-turning, welding, assembly, outsourcing, wiring and PCB board design. I can provide support both on product development as well as manufacturing aspects of your porjects.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

I am professional Architectural Draftsman with expertise in preparing building layout, sketches, floor space planning, site plan , working drawings, center line drawings, elevation working drawings, f... Read more

I am professional Architectural Draftsman with expertise in preparing building layout, sketches, floor space planning, site plan , working drawings, center line drawings, elevation working drawings, floor plan detailing etc. Expert in Autocad with great accuracy and speedy delivery of the construction projects.

ID. Mohamed Nabil is an Interior /Furniture Designer professional ,years of experience in interior/Furniture (Wooden/Metal ) Field , in both fields Home/Office. He is currently available for Freelan... Read more

ID. Mohamed Nabil is an Interior /Furniture Designer professional ,years of experience in interior/Furniture (Wooden/Metal ) Field , in both fields Home/Office. He is currently available for Freelancer work or full-time positions. 2003 M.Mekaied. Manage productions and planning tender of GAEB for 2 years. 2005 Reviewer on Archi-touch drawing Standard lines. 2007 Furnishing Oracle company smart village branch, designing (Workstations, Meeting table, manager desks…) with its full detailed drawing. 2008 Design (Cairo festival / Schneider / Makro) Wall Partitions System, with full Detailed (metal/wood/Glass) Workshop drawing. 2009 Design ITIDA minister room. 2010 Sameramis _ Palm Hills Villa _ Hacienda Bay _Golf City Hotel) Projects (Shop Drawing- Manufacture-Installation ) .for (Door ,Wall Cladding, Dressing, LCD Units. Kitchens....etc. ) 2013 Tenders study team leader at wood and Plexi (Dwg _Presentations) 2014 Deputy of Tech. Mngr. at wood and Plexi 2015 Within a team to establish new Kitchen/Dressing brand in (Tallat Mustafa group)

We are experienced professionals with more than 20years ,offering comprehensive services in architecture, interior design, and landscape

We are experienced professionals with more than 20years ,offering comprehensive services in architecture, interior design, and landscape

A pleasant Day! My Name is Johnstone, you call me Jimmy I have working experiences with 3 companies, let me discuss first the previous company which is Teragrail, I am a Cad engineer with almost 2 y... Read more

A pleasant Day! My Name is Johnstone, you call me Jimmy I have working experiences with 3 companies, let me discuss first the previous company which is Teragrail, I am a Cad engineer with almost 2 years. I am specialized with autocad and Solidworks at same time I have small experiences with Revit, Civil 3D and Sketchup. Using Autocad I can make as-built plans such as plumbing and sanitary for 2 and 3 storey houses, workshop drawings, cross section, Elevation and 3D model Using Solidworks, I can model and design a furniture, parts and mechanism, FEA. Using Revit I can provide a 3D house design from floor plan into architectural and structural, this includes also Plumbing and waterline plan that circulates on the houses. Now for the 2nd Company is Ecoserv, I am a Project Engineer which focuses in STP. I manage different teams such as Fabrication, Installation, Maintenance, and Repair Team. In addition, I can make a scheduled, quotation, cost estimates and Design. For now, I will explain how I design the STP which composes of different Equipment, pipes and Tank. Using Autocad and Solidworks I can make a plan and section for Septic tank pipes, and Equipment, I can show a Process Flow Diagram for Treatment for wastewater, until it was filtered and can be reused again or distribute to the sewer. And the last job is CNPC which is a government. This is my Summer Job in my 2nd year college. My role for this is drafting only because the design is provided by my supervisor, I can also provide a as-built plan, and workshop drawings, I drafted to this role is Kapitolyo which is 4 storey building, a warehouse, parking area and covered court. I also do site visits and inspection for proper measuring and accuracy. Those are my working experiences with companies. If there a are training for software I am very interested to learn. And that’s it.

Architect Anchal Completed my degree in 2018 batch and 2 year of working experience in residential , commercial , public buildings projects. Software Skills - AutoCAD , Photoshop, Excel, SketchUp Exp... Read more

Architect Anchal Completed my degree in 2018 batch and 2 year of working experience in residential , commercial , public buildings projects. Software Skills - AutoCAD , Photoshop, Excel, SketchUp Experience in working drawings , presentation drawings , 3 d models , conceptual drawings

Hello, I’m Devie Mar Abadilla, a Licensed Mechanical Engineer based in the Philippines. I have extensive experience in design and development, starting as a Design Developer for the Philippines Rice... Read more

Hello, I’m Devie Mar Abadilla, a Licensed Mechanical Engineer based in the Philippines. I have extensive experience in design and development, starting as a Design Developer for the Philippines Rice Combine Harvester Project in a research and development company. I later worked as a Draftsperson for an Australian manufacturing company, specializing in precise technical drawings and mechanical designs. Now, I am a full-time freelance mechanical designer, providing end-to-end design solutions—from concept development and 3D modeling in SolidWorks to assembly design with equations, configurations, and mechanical mates. I also create detailed workshop drawings for manufacturing and am expanding my expertise in rendering and animation using SolidWorks and KeyShot to enhance visual presentations. Additionally, I have hands-on experience with 3D printing. I can generate STL files and use my own Creality K1C printer to test prototypes, ensuring designs are practical and production-ready. As a dedicated freelancer, I am always eager to learn new applications to meet your project’s needs. Whether you require full-time or part-time support, I am ready to collaborate and bring your ideas to life. Let’s discuss your project—I’m committed to delivering high-quality results and turning your vision into reality! ✅ PHILIPPINE RICE COMBINE HARVESTER ✅ SPROCKETS ✅ TROLLEYS ✅ WHEELS ✅ STEEL & WOODEN FURNITURE ✅ 3D PRINTED PRODUCTS ✅ CUSTOM BOXES ✅ STAIRS ✅ CONCEPT DESIGN ✅ ASSEMBLY (WITH EQUATIONS) ✅SOLIDWORKS CONFIGURATION ✅COMPLETE WORKSHOP DRAWING ✅RENDER ✅3D PRINT

A natural passion for sciences and mathematics provided an easy choice to study mechanical engineering. Adept in carefully diagnosing and assessing issues while offering viable manufacturing solutions... Read more

A natural passion for sciences and mathematics provided an easy choice to study mechanical engineering. Adept in carefully diagnosing and assessing issues while offering viable manufacturing solutions. My previous employment at Sonnex has provided valuable experience in metal fabrication, drafting, project management, developing interpersonal skills and working autonomously and responsibly. My recent work with Custom Transport Equipment has greatly extended my skills in Solidworks, Autocad and the various aspects and systems involved in manufacturing a quality product. I have a strong emphasis on the importance of teamwork and collaboration to improve effectiveness and an altruistic motivation in life and work. I enjoy 3D modeling and seeing designs and concepts come alive through the power of Inventor

Experienced steel detailer which provides high quality fabrication shop drawings for structural, miscellaneous and other metal projects.

Experienced steel detailer which provides high quality fabrication shop drawings for structural, miscellaneous and other metal projects.

WORK EXPERIENCE 08/05/2017–25/09/2018 Mechanical Engineer ArcelorMittal, Zenica (Bosnia and Herzegovina) - trainee - 6 months, - making 3D models, technical documentation for Steel Making Plant in... Read more

WORK EXPERIENCE 08/05/2017–25/09/2018 Mechanical Engineer ArcelorMittal, Zenica (Bosnia and Herzegovina) - trainee - 6 months, - making 3D models, technical documentation for Steel Making Plant in ArcelorMittal Zenica, - hydraulic systems and machines maintanance, - supervisor for Steel Making Plant Mixer overhaul, - cranes maintanance for Steel Making Plant. 08/10/2018–08/04/2019 Mechanical Design Engineer Kinetic d.o.o., Sarajevo (Bosnia and Herzegovina) - structures design and making workshop drawings by using CAD softwares, - making calculations with FEM softwares and making analitical calculations, - making technical documentation and reports for verification personnel, - project for ESS - European Spallation Source - complete realization from idea, simulations up to making technical documentation and animation in SolidWorks packet, - making drawings for crane structures for MacGregor - Norway. EDUCATION AND TRAINING 01/09/2007–01/05/2011 First Comprehensive High School in Zenica, Zenica (Bosnia and Herzegovina) 01/10/2011–01/11/2016 Bachelor of Science of Mechanical Engineering University of Zenica, Faculty of Mechanical Engineering, Zenica (Bosnia and Herzegovina) Department: Engineering Product Design - CAD/CAM/CAE in general, - CAD/CAM/CAE using SolidWorks packet.

Steel structure Designer by ISOTEC Karachi Project work CEMENT MILL 70 TPH Scope of work Falcon Cement All Steel Structure Designing and provided by Design Calculation(Staad Pro), Fabrication... Read more

Steel structure Designer by ISOTEC Karachi Project work CEMENT MILL 70 TPH Scope of work Falcon Cement All Steel Structure Designing and provided by Design Calculation(Staad Pro), Fabrication Drawings & Bill of Quantity. Supporting Steel Structure by: 1. Belt Conveyors. 2. Weigh feeders. 3. Transfer Stations. 4. Air slides. 5. Classifier. 6. Screw conveyors. 7. Bag Filters. & Fans. 8. Bucket Elevators. 9. Cyclone inlet, outlet ducts Classifier inlet, outlet ducts. 10. Stairs.

I am driven by an entrepreneurial spirit, passion for architecture interior design, and determination to build new business opportunities. Thrive in creating solutions that improve the human experienc... Read more

I am driven by an entrepreneurial spirit, passion for architecture interior design, and determination to build new business opportunities. Thrive in creating solutions that improve the human experience. As an experienced A&D B2B sales & design consultant based in India, I have hands-on expertise through my contribution to various high-profile projects fitted with our premium tiles brands. Through my background in Architecture, an inspiration emerged for me to discover a career path in the proprietary furniture industry. Being able to appreciate design and design-related industries in a new manner. Skilled in Negotiation, Management, Business-to-Business (B2B), Project Management, and Customer Service. Strong business development professional with a Bachelor of Engineering - BE focused in Civil Engineering from IME College. I love meeting new people, being immersed in the next project, and staying connected with Architecture, Design community.

Senior Design Engineer with 8+ years of experience in structural design and estimation of Pre-Engineered Steel Buildings (PEB) with more than 25 projects worth 3500+ tons of prefabricated steel with e... Read more

Senior Design Engineer with 8+ years of experience in structural design and estimation of Pre-Engineered Steel Buildings (PEB) with more than 25 projects worth 3500+ tons of prefabricated steel with expertise in Design software packages like Autodesk Robot Structural Design, Sap2000, STAAD.pro, Autodesk Advance Steel and Revit. Experienced in creating manufacturing automation solutions to complex problems using Autodesk Inventor Professional (iLogic & VB), SolidWorks, Creo Parametric, and Catia. In my spare time, for skill development I like to freelance on platforms such as ▒▒▒▒▒▒ and ▒▒▒▒▒▒ undertaking variety of industrial projects ranging from designing of small consumer products to providing solution to real world engineering problems.

My name is chintan. I am a professional Architect well trained to specifically assist in solving Various Architectural problems. I have over 5 year’s good experience in this field. I have done many pr... Read more

My name is chintan. I am a professional Architect well trained to specifically assist in solving Various Architectural problems. I have over 5 year’s good experience in this field. I have done many projects and assignments. Therefore, I will do your architectural drawings and projects. My services • Working/construction drawing (residential / commercial / corporate) • 3d modelling (residential / commercial / corporate) • Photoshop rendering of architectural plans / master layout • Design a house plan, elevation, section. (all 2d drawings) • 3d rendering • Convert pdf floor plans into dwg floor plans

Hello. I am a civil engineer, graduated in UACEG, Sofia, Bulgaria. Last two years I am working at the area of the steel constructions - connections, design, workshop drawings, static calculations. I h... Read more

Hello. I am a civil engineer, graduated in UACEG, Sofia, Bulgaria. Last two years I am working at the area of the steel constructions - connections, design, workshop drawings, static calculations. I have skills also in Eurocodes, 3D and 2D drawings, architectural and engineering solutions, Deutsch and English.

Worked as a design in the Ain Shams university racing team and participated in the Shell Eco-Marathon competition in Asia by designing, building, and manufacturing an ICE (Internal combustion Engine V... Read more

Worked as a design in the Ain Shams university racing team and participated in the Shell Eco-Marathon competition in Asia by designing, building, and manufacturing an ICE (Internal combustion Engine Vehicle) with the most fuel efficiency (248.5 Km/L). Start my team (Azhar racing team) at my university (Al-Azhar University). participated twice in EVER in Egypt by designing, building, and manufacturing urban electric vehicles. I was awarded in 2022 with 2nd place in the design competition.

Hi, I’m Suja Arun, and I’m D-Arch Holder (second rank in state level) with over 19 years of comprehensive Architectural and Interior experience with clients from all over the world. I have done ext... Read more

Hi, I’m Suja Arun, and I’m D-Arch Holder (second rank in state level) with over 19 years of comprehensive Architectural and Interior experience with clients from all over the world. I have done extensive work in Designing, Drafting, and Documentation for Architectural firms, first in India (my first 5.5 years), then as a US outsource asset (3 years), and now with firms globally as a remote freelancer (the past 9 years). Through my varied career trajectory, I’ve learned the most important factors in undertaking and completing top quality work: creativity, a strong work ethic, and open communication. As a freelancer, I ensure that all these aspects are evident and prevalent in my work with each and every client. Each project comes with unlimited revisions and readily available source files, and 24/7 support to answer all questions, queries, and concerns. The following list is a collection of my offered services and the tools and software I use to perform them. If you have any questions about any of them (or anything not listed), feel free to reach out and ask: ● Preparation of Design Brief ● Design and Site Development ● MEP Design ● Landscape Architecture ● Interior Design ● Architectural Conservation ● AutoCAD ● Sketchup ● Adobe Photoshop All of these services are guaranteed to be creatively imagined, accurately crafted, and of original thought and design. I will work with you to create something that not only fits what you’re looking for but elevates it into something that is simultaneously eye-catching and structurally sound. If you’re interested in working with me, I’m always available through Freelancer and would love to chat with you about your project and how we can design and develop it. Send me a message whenever is convenient, and we can get started! Thanks, Suja Arun

I am an Architect and I have enjoyed a challenging and diverse range of experiences since qualifying in 1997. I have spent much of my career involved in interior design, working internationally in Ca... Read more

I am an Architect and I have enjoyed a challenging and diverse range of experiences since qualifying in 1997. I have spent much of my career involved in interior design, working internationally in Canada, the USA and most recently Turkey. The Projects have included Yachts, multi outlet Retail, Restaurants, Hospitality, Point of Sale and Residential. My direct responsibilities have varied over the years and projects, but duties have pretty much covered everything from initial Client Briefing, through Concept Design, Coordination with other Architects, Structural Engineers, General and individual Trade Subcontractors (incl. Plumbing, Electrical, Stonework) to final delivery to the Client. I have spent a great deal of my time on Site, controlling quality, providing additional information to Contractors and dealing with conflict resolution. I am knowledgeable and productive with the usual software packages, and have particularly good experience with 3D construction modeling for production (Rhino) and preparing conceptual renderings (Maxwell). I have spent many years working as an outside resource for various companies including conventional building architecture, naval architecture as well as yacht and hospitality design. I can offer the following services and would love to have a conversation about your requirements; • Concept and design development • Preliminary and final layouts, elevations, construction details and workshop drawings. • 3D modeling from 2D drawings • 3D conceptual renderings • Material and fixture specification