Hire the best freelance vibration analysis expert designers for your company

AnalysisPros is an independent Finite Element Analysis Services (FEA) firm, established in 1994, dedicated to support the design and engineering community with FEA applied knowledge and access to the... Read more

AnalysisPros is an independent Finite Element Analysis Services (FEA) firm, established in 1994, dedicated to support the design and engineering community with FEA applied knowledge and access to the latest analysis solutions and technology. The company provides structural (linear and nonlinear, static and dynamic), thermal, fluid and MoldFlow analysis capabilities utilizing FEA tools. The company mission is to provide its clients with the best analysis solutions available and the highest level of support and quality possible. The company provides analysis services to almost any imaginable application. Application of the FEA methods range from traditional Aerospace, Automotive and Medical to the Entertainment and Toy industries. AnalysisPros clients include design and engineering firms that have a need for an occasional and reliable analysis services on their designs. This service is an alternative option to companies which do not have large enough volume of analysis that justifies the purchase, maintenance and dedicated personnel for doing the analysis work. It directly translates to saving in time and money by utilizing a company that has the latest FEA technology and experience readily available. By using the service, it is possible to generate a simulation of any designed structure, loaded with almost any imaginable way. Through the use of FEA tools and many years of analysis experience, the virtual testing of any design is made possible in record time. AnalysisPros supports its clients at any stage of the engineering process. The analysis service helps in evaluating feasibility of new design as well as trouble shooting failed design already in the market and finding solutions without the need to prototype and waste time and money. For companies that comply with the ISO 9000 design process and FEMA recommendations, numerical analysis and virtual testing, verification and validation is a must. FEA methods provide the capability for companies to establish a design review at any stage in the project. The benefits of starting analysis early in the design cycle translates later to savings in cost. By validation and verification of the design, before even prototyping, true optimization can be achieved through a predictive testing.

I’m a mechanical engineer with over 10 years of professional experience in Finite Element Analysis (FEA), focused on solving complex engineering problems related to structural strength, stiffness, vib... Read more

I’m a mechanical engineer with over 10 years of professional experience in Finite Element Analysis (FEA), focused on solving complex engineering problems related to structural strength, stiffness, vibration, crashworthiness and topology optimization. Expertise includes: • Linear and Non-linear analysis • Static and Dynamic analysis • Implicit and Explicit analysis • Optimization • Material testing and building material FEM models • Materials: metals, composites, plastics, foams, honeycombs.. Deliverables: • Pre-Processing (Meshing) • Solving • Post-Processing (Results) • Design improvement proposals • Technical Report • FEA Consulting

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

I am a structural engineer (MSc, BEng) with over 7 years experience working in Poland and simultaneously in the UK (6 years in London). During my career I was involved in wide range of projects, inclu... Read more

I am a structural engineer (MSc, BEng) with over 7 years experience working in Poland and simultaneously in the UK (6 years in London). During my career I was involved in wide range of projects, including: - King's Cross S1, S2 - commercial office buildings - I worked on this project from stage 1 to stage 5 including site visits, vibration analysis, foundation design, concept design for all the cantilevers, design of all concrete elements and checking detailing drawings https://www.kingscross.co.uk/s2-handyside - 220 High Holborn Street - extension of office building in Canary Wharf - stage 3 design - Oaks Park High School and Redbridge School - stage 4 design - Orange Office Park - concept design for an office building http://orangeofficepark.pl/en - multiple houses design (about 30 - 35) from small 100 sqr meter houses to mansions (400 sqr meters) and blocks of flats (up to 3 storeys) (all in Poland) - Cardiac Centre Building in Nowy Sącz, Poland - Arlanda Airport, Stockholm - stage 1 and stage 2 design of the new terminal - Church bulding in Poland- stage 1 to 3 (stll ongoing) - Sports Hall (adjecent to school building) in Nowy Sącz, Poland etc

I've been interested in structural strength since I was a child, later choosing to become a mechanical engineer, learning how to achieve high-quality products with optimized shape and light weight. I... Read more

I've been interested in structural strength since I was a child, later choosing to become a mechanical engineer, learning how to achieve high-quality products with optimized shape and light weight. I have a lot of experience from many different areas of engineering, like equipment for transformers (tap-changers and bushings), power towers and masts, machines, mechanisms, cranes and much more. As could be seen from the numbers of softwares I have used, I am a very quick learner which also means that I most often can understand a project or problem and start my work on it very quick. But I always try to have an open mind, knowing that good quality often comes from assessing several alternativs before choosing, An important goal is to give my customers early indications when finding room for improvement of a product/project. Many have been astonished by the speed of my work, but quality is more important for me than speed. Of course, high speed often means lower costs in the end.

I'm a highly skilled Mechanical Engineer, delivering professional results and timely service. I'm based in Copenhagen, Denmark. I specialize in CAD, Mechanical Design, Design/Drawings for Manufacturin... Read more

I'm a highly skilled Mechanical Engineer, delivering professional results and timely service. I'm based in Copenhagen, Denmark. I specialize in CAD, Mechanical Design, Design/Drawings for Manufacturing and FEM analysis.

"I have a Master's in Machine Design with 10+ years of experience in Finite Element Modelling and Structural Analysis. I excel in using CAE tools like Hypermesh, Optistruct, Radioss, and more to tackl... Read more

"I have a Master's in Machine Design with 10+ years of experience in Finite Element Modelling and Structural Analysis. I excel in using CAE tools like Hypermesh, Optistruct, Radioss, and more to tackle complex challenges.

I am determined and energetic and active. I always try to be different and I'm the challenger of Impossible. I am a result-oriented professional who has been consistently praised as hard-working by my... Read more

I am determined and energetic and active. I always try to be different and I'm the challenger of Impossible. I am a result-oriented professional who has been consistently praised as hard-working by my co-workers and management. Over the course of my 16 years’ career, I have developed a skill set directly relevant to the principal role you are hiring for, including Research and Development (R&D), Manufacturing Processes, innovative design, 3D modeling and model simulation.

Dedicated mechanical engineer with more than 6 years of experience in project management, design, development, and quality assurance. Expert in CAD operation, and skilled producer of documentation and... Read more

Dedicated mechanical engineer with more than 6 years of experience in project management, design, development, and quality assurance. Expert in CAD operation, and skilled producer of documentation and drawings associated with mechanical engineering. I'm talented, really smart, responsible and a good problem solver.

-I'm a Mechanical design engineer, with over 8 years of experience in special purpose machine (SPM) design, analysis and development, successfully completed more than 200 projects as a project leader/... Read more

-I'm a Mechanical design engineer, with over 8 years of experience in special purpose machine (SPM) design, analysis and development, successfully completed more than 200 projects as a project leader/designer. -I have great expertise in Automatic assembly lines like Ignition top coil, Isolator switches, Endurance testing machine for four-wheeler door’s window regulator, Vehicle flexible exhaust connector, Process machines like robo painting, soldering, deburring, caulking. EOLT machines for Vehicle HVAC, BLDC Motor controller, Celling fan, Material handling solution like four-wheeler sliding platform, Belt conveyor system of PCB soldering line. Skill set: -CAD- Solidworks, Unigraphics NX, Catia, AutoCAD -FEA with NASTRAN, ANSYS and Solidworks simulation -Prepare detailed manufacturing drawings using advanced concept of GD&T -Tolerance stack-up analysis, gauge tolerance calculation -Actuators selection for various application- ball screw motor actuator, belt conveyors, pneumatic application -In depth Pneumatic and hydraulic system- actuator, valves, power pack selections and circuit design -High speed application bearing selection, experience in mechanical vibration problem and its solutions. -Project/Machine DFMEA, Machine operation FDS for PLC programing team and machine manual -Design approval document preparation based on in-depth understating of customer requirement. -Project management- Cost estimation, project progress tracking and alignment with customer.

With over two years of experience designing materials handling equipment at Podmores, I specialize in 3D modeling, technical drawings, and CAD automation using SolidWorks and DriveWorks. Holding a Mas... Read more

With over two years of experience designing materials handling equipment at Podmores, I specialize in 3D modeling, technical drawings, and CAD automation using SolidWorks and DriveWorks. Holding a Master’s in Automotive Engineering, I’m a quick learner now proficient in Onshape and FreeCAD, delivering precise, manufacturable designs remotely using client-provided or free tools. I’m passionate about streamlining workflows and solving complex engineering challenges for manufacturing and product design clients.

MTech EVT student from IIT Indore (Among top 10 IITs). Professional Experience of 2 years (1.5 years in Mechanical Design) Experience in 3D Design and 2D drawings in Creo. BTech Projects on SolidWorks... Read more

MTech EVT student from IIT Indore (Among top 10 IITs). Professional Experience of 2 years (1.5 years in Mechanical Design) Experience in 3D Design and 2D drawings in Creo. BTech Projects on SolidWorks.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

I have done Masters in Mechanical Machine Design. I have good knowledge of CAD tools and CAE tools. I have worked on structural and vibration analysis of structure in Solidworks, ANSYS & Abaqus.

I have done Masters in Mechanical Machine Design. I have good knowledge of CAD tools and CAE tools. I have worked on structural and vibration analysis of structure in Solidworks, ANSYS & Abaqus.

still an under-graduate student, done research in designing and analysis of mini truck trailer under "Scopus" journal, development and vibration analysis of flutes & working on a solar plant design un... Read more

still an under-graduate student, done research in designing and analysis of mini truck trailer under "Scopus" journal, development and vibration analysis of flutes & working on a solar plant design under the condition of storm.

Working professional, in the field of machine design and FEM simulation and mathematical modelling of systems. I have worked in the fields of mechanical design for agricultural automation, mathematic... Read more

Working professional, in the field of machine design and FEM simulation and mathematical modelling of systems. I have worked in the fields of mechanical design for agricultural automation, mathematical modelling for vibration analysis and others.

Mechanical design, Marine type or industrial rugged console design, IP67 aluminium or steel enclosure design. Static, shock and vibration analysis with Ansys workbench. Thermal analysis and electronic... Read more

Mechanical design, Marine type or industrial rugged console design, IP67 aluminium or steel enclosure design. Static, shock and vibration analysis with Ansys workbench. Thermal analysis and electronic cooling with Ansys Icepak, I have 7 years of experience in medical device design and manufacturing.

Mechanical & Aersopace Engineer by trade, artist by heart and deep inside just a guy inspired by nature. Looking to combine the best of these worlds in each project. Experience includes FEA, CAD (Inve... Read more

Mechanical & Aersopace Engineer by trade, artist by heart and deep inside just a guy inspired by nature. Looking to combine the best of these worlds in each project. Experience includes FEA, CAD (Inventor, CREO, NX), python, matlab and vibration analysis. Fields of exposure include aviation, automotive, AI, oil&gas, mining, research, consulting and developed hands-on skills as a field technician.

I am a degreed, full service design engineer, that offers quick turn around of complex and detailed engineering projects. i communicate very well and I am very easy to work with. I have 25+ years of e... Read more

I am a degreed, full service design engineer, that offers quick turn around of complex and detailed engineering projects. i communicate very well and I am very easy to work with. I have 25+ years of experience. I currently use Solid Works software to create CAD designs and drawings. I also can run FEA including Static and Vibration analysis.

I’m a mechanical engineer with over 7 years of hands-on experience in engineering simulations using ANSYS Workbench. I help clients solve real-world mechanical challenges by delivering accurate, relia... Read more

I’m a mechanical engineer with over 7 years of hands-on experience in engineering simulations using ANSYS Workbench. I help clients solve real-world mechanical challenges by delivering accurate, reliable, and actionable simulation results. My Expertise Includes: Structural Analysis • Stress analysis (linear & nonlinear) • Modal and vibration analysis • Fatigue life estimation • Buckling and stability assessment Thermal Analysis • Steady-state and transient heat transfer • Coupled thermal-structural simulations CFD (Flow Simulation) • Internal/external flow analysis • Heat transfer in fluids • Pressure drop and velocity distribution

Hello, my name is Arnaud I have been performing design and structural analysis since 2008. I have on a variety of projects in the nuclear, automotive, construction, and aerospace sectors. I use Solidw... Read more

Hello, my name is Arnaud I have been performing design and structural analysis since 2008. I have on a variety of projects in the nuclear, automotive, construction, and aerospace sectors. I use Solidworks, Inventor, Catia and Onshape to develop my designs. I am an experienced FEA engineer and can perform non-linear analysis, along with modal and vibration analysis. Please feel free to reach out to me to discuss your project and how I can help your best reaching your goals!

*4 years and counting, we continue to strive to be among the top freelancers here * We provide solutions from scratch including: 1. 3D Modeling, Product design, 2. 2D to 3D Conversion. 3.... Read more

*4 years and counting, we continue to strive to be among the top freelancers here * We provide solutions from scratch including: 1. 3D Modeling, Product design, 2. 2D to 3D Conversion. 3. Mold & Tool Design Services 4. CAE Services include Structural (static, dynamic and kinematics) analysis, tharmal & vibration analysis and CFD analysis using tools like ANSYS 5. Machine Design & Product Development *Our goal is to ensure each and every client receives the highest possible level of quality and service, at a rate well below what they would pay for in-house or domestic services. * Provide the Source File whenever client ask for it.

Hi! I am an Aerospace Engineering graduate from Hindustan Institute of Technology and Science, Chennai, with a strong foundation in aerodynamics, structural mechanics, and mechanical design. Currently... Read more

Hi! I am an Aerospace Engineering graduate from Hindustan Institute of Technology and Science, Chennai, with a strong foundation in aerodynamics, structural mechanics, and mechanical design. Currently I'm working at NCCRD, IIT Madras. Skilled in industry-standard tools like SolidWorks, Ansys, CATIA, Fusion 360, and MATLAB, I’ve led and supported projects ranging from vibration analysis in helicopters to aerodynamic performance of different wing configurations. I have also published research in national seminars and actively participated in workshops by ISRO, TUM, and SAEINDIA. I’m deeply interested in advancing technologies in aerospace, EV systems, and renewable energy—from aircraft design to battery tech and sustainable energy storage systems. I enjoy solving engineering problems with creativity, precision, and collaboration.