Hire the best freelance Piping Flexibility Analysis expert designers for your company

I am successful in building quality relationship with clients on various oil and gas projects as a mechanical engineer and piping engineer with my skills in drafting, modeling and FEA analysis as per... Read more

I am successful in building quality relationship with clients on various oil and gas projects as a mechanical engineer and piping engineer with my skills in drafting, modeling and FEA analysis as per industry code ASME B31.1, ASME B31.3, API 610, 650, 620 and WRC107. NEMA SM 23 etc. I am experience in modeling 3D piping, generating isometrics, and check pipe spec and bill of material.

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

I have 20+ years experience in the field of petrochemical industry, 2D/3D piping design and with all what is related to piping (supports design, equipment design etc.) Also I am able to perform stress... Read more

I have 20+ years experience in the field of petrochemical industry, 2D/3D piping design and with all what is related to piping (supports design, equipment design etc.) Also I am able to perform stress analysis of piping systems using Intergraph Caesar II application.

7 years experiences as piping designer and engineer on oil and gas project, oleo-chemical project, petrochemical project, has back ground on mechanical engineer

7 years experiences as piping designer and engineer on oil and gas project, oleo-chemical project, petrochemical project, has back ground on mechanical engineer

I am James Lee working as a Structural Steel Engineering Consultant and designer at Outsourcing Steel Detailing. We provide high quality and cost effective Engineering services to worldwide clients. f... Read more

I am James Lee working as a Structural Steel Engineering Consultant and designer at Outsourcing Steel Detailing. We provide high quality and cost effective Engineering services to worldwide clients. for more information please visit us at http://www.outsourcingsteeldetailing.com

Hello, I am a Mechanical Engineer with a Master's degree specialized in the area of design and computational mechanics. I have developed projects for the analysis of mechanical components using fin... Read more

Hello, I am a Mechanical Engineer with a Master's degree specialized in the area of design and computational mechanics. I have developed projects for the analysis of mechanical components using finite elements, mechanical integrity assesments according to API 579, flexibility evaluations in piping systems, design of mechanical components according to ASME standards, and others CAD related applications. I have software experience with SolidWorks and Inventor for 3D CAD design. I have used ANSYS for deep analysis using FEM or CAESAR for piping. MATLAB, MathCad and similars, to develop intensive calculations or data processing. I also have office skills for the preparation of technical reports, automated spreadsheets in Excel or presentations. I work as a professor in the university since I graduated in 2010, giving courses in solid mechanics and design, as well as research projects or consultancy in the area of materials resistance, stress analysis, piping, pressure vessels and mechanical design. I am interested in new projects, product development, investigation or design, however I am willing to help or collaborate in any project in which I can contribute positively.

http://ve.linkedin.com/pub/jos%C3%A9-mauricio-amundarain-cascella/2b/667/906/

http://ve.linkedin.com/pub/jos%C3%A9-mauricio-amundarain-cascella/2b/667/906/

Hi, I am Debesh Pradhan and I am a professional mechanical/piping engineer with B.Tech from NIT Durgapur( deemed university). I have expertise in piping stress analysis of high-temperature systems wit... Read more

Hi, I am Debesh Pradhan and I am a professional mechanical/piping engineer with B.Tech from NIT Durgapur( deemed university). I have expertise in piping stress analysis of high-temperature systems with experience of more than 6 years. I also do basic and detail engineering of piping systems including calculations such as pipe Dia. , thickness, pressure loss calculation, support design etc. I use Autocad to prepare 2D piping GA drawings and CAD WORX to prepare 3D drawings., I have a zeal to become a top-notch entrepreneur who remains committed to the quality job for all my clients.

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direc... Read more

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direct reduction plants, slurry transportation, cryogenic piping, etc.) and oil & gas projects (refineries, oil fields). Developed competences in most important piping codes (including ASME B31.1, ASME B31.3, EN-13480, etc.), and acquired proficiency in all aspects of static and dynamic pipe stress analyses (seismic, PSV transients, water hammer, harmonic vibrations, high-frequency vibrations, etc.) including generating critical line list, preliminary route studies and equipment arrangements, building load cases to satisfy code requirements, support design and analysis and fatigue assessments. In-depth knowledge of piping layout design using 3D software. In addition to pipe stress analysis and piping design, which is the primary field of expertise, during the work at the University of Belgrade (as PhD candidate), developed skills in pressure vessel analysis (ASME VIII-1, ASME VIII-2 and EN-13445), process equipment sizing, process design and optimization, heat and mass transfer calculations, fluid flow calculations (steady state and transient, including interaction with the stress analysis), CFD calculations, programming as well as advanced measurement and research techniques which has all proven extremely valuable in the practice. First author and co-author of several engineering and scientific research papers.

I'm a mechanical engineer with more than 10 years of experience in structural analysis (piping, pressure vessel, process equipments, general structures, etc). An overview of some executed projects:... Read more

I'm a mechanical engineer with more than 10 years of experience in structural analysis (piping, pressure vessel, process equipments, general structures, etc). An overview of some executed projects: http://www.unitecnica.com.br/en/projects 1 - Brochure: http://online.fliphtml5.com/fshq/vdjz/ 2 - Unitecnica Projetos: http://online.fliphtml5.com/fshq/cuax/ 3 – Projetos Petrobrás: http://online.fliphtml5.com/fshq/pnyb/ 4 – Nuclear: http://online.fliphtml5.com/fshq/bhao/

Piping Engineer capable to integrate into piping layouts the best industry practices, flexibility analysis and support selection. I have experience in the departments of materials, design and flexibil... Read more

Piping Engineer capable to integrate into piping layouts the best industry practices, flexibility analysis and support selection. I have experience in the departments of materials, design and flexibility; developing activities as piping designer, stress engineer, field survey, BOM, reviewing specifications and documents of different disciplines, meetings with the customer, client counseling in English and Spanish. I have proficiency in SmartPlant 3D, PDS, CAESAR II, AutoCAD and others. Professional Training: - CAU Express 2015. Intergraph. October 2015. Duration 8 hours. - Stress Analysis of Piping Systems and Support Selection (CAESAR II) Inelectra. July 2015. Duration 40 Hours. - Supporting Piping Systems with CAESAR II and SmartPlant 3D. Inelectra. June 2015. Duration 8 hours. - SmartPlant 3D Piping. Inelectra. December 2014. Duration 40 hours. - SmartPlant 3D Equipment Modelling. Inelectra. November 2014. Duration 24 hours. - Piping Design II. Inelectra. June 2014. Duration 32 Hours. - Piping Design I. Inelectra. March 2014. Duration 32 Hours. - Pipe calculations (ASME B31.1, B31.3, B31.4, B31.8). Engineers Association of Venezuela. February 2013. Duration 24 hours. - Integration of Process Energetic (Pinch Methodology). Tecnopinch Integral Solutions. December 2012. Duration 8 hours.

Experienced mechanical and piping engineer with over 25 years in offshore and onshore Oil & Gas projects. Skilled at developing optimized plant layouts, leading stress analysis teams, and managing pro... Read more

Experienced mechanical and piping engineer with over 25 years in offshore and onshore Oil & Gas projects. Skilled at developing optimized plant layouts, leading stress analysis teams, and managing projects up to $150 MMUSD. Deep expertise in piping design, flexibility analysis, equipment specifications and mechanical calculations (API 610, API 661, API 650, ASME Section VIII). Proficient in CAESAR II, AutoCAD Plant 3D, CADWorx, PV Elite and related tools. Recognized for delivering cost‑effective designs, coordinating multi‑disciplinary teams and ensuring compliance with codes and client standards. Based in Houston, Texas with professional working English. Skilled in performing finite element analysis (FEA) for piping components and equipment using CAESAR II and NozzlePro to assess stresses, fatigue, and structural integrity.

Study of Process flow diagram (PFD) and piping and instrument diagram (P&ID) to create piping and ducting layout. Creating the ducting and piping model in PDMS and generating material take off for... Read more

Study of Process flow diagram (PFD) and piping and instrument diagram (P&ID) to create piping and ducting layout. Creating the ducting and piping model in PDMS and generating material take off for the bill of material Review the model for any clashes through the use of PDMS review and resolve the clashes. Creating Hanger and support model with secondary steel in PDMS. Giving stress analysis input for flexibility of piping and ducting and ensure the stress analysis output. Generating ducting layout, piping layout and cross-section drawings. Generating isometric drawing in PDMS Isodraft application and checking with P&ID, Pipe list and Valve list Generating ducting fabrication drawing in PDMS draft application and checking with P&ID. Generating Hanger and support draw in PDMS Draft application. Support to team for layout and fabrication drawings

My name is Dennis Tinoco and I am a Mechanical/Piping Designer. I studied Industrial Mechanical Engineering and continued my education with training in the field of engineering for the design of mecha... Read more

My name is Dennis Tinoco and I am a Mechanical/Piping Designer. I studied Industrial Mechanical Engineering and continued my education with training in the field of engineering for the design of mechanical and hydraulic systems. My Skills: - Mechanical design with Autodesk Inventor. - Structural design with Advance Steel. - Pressure vessel design under ASME SECTION VIII DIV 1 with AUTOPipe Vessel. - Atmospheric storage tank design based on API 650 and API 12F with AMETank. - Design of process piping, cross-country piping, and gas distribution based on ASME B31.3, B31.4, B31.8, and industrial plants with AutoCAD Plant 3D and Pipe Flow Expert. - Flexibility analysis and pipe stress calculation with CESAR II. I am dedicated to the design, modeling, and drawing of mechanical equipment such as flares, skids, shelters, handrails, ladders, storage tanks, KOD, vessels, scrubbers, silos, metal structures, industrial plants, flexibility analysis, and pipe stress loads.

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanica... Read more

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanical. My current specialty involves piping engineering (Stress analysis), Code Calculations; and well acquainted with Pipeline Calculations (Hydraulic analysis, Surge Analysis, Pipe Wall thicknesses for internal and external pressure; and branch Connection) as per Referenced ASME Standards. I have a wide exposure to different multinational engineering firm’s environments and standards through participation in part time and full time contracts projects. Core Competencies • Well acquainted with ASME Codes (B31.1, B31.3, B31.4, B31.8, SEC. VIII DIV. 1) Calculations • Preparation of technical specifications and design calculations • Preparing Critical Line Lists • Static and dynamic stress analysis of piping systems (Sustained loads, Expansion loads &Occasional load) Using CAESAR II • Specializing in pipe stress analysis and advising design team on arrangement and support requirement to work within code stress requirements • Pipe support hardware selection & details drawings. • Nozzle flexibility Check • Equipment Nozzles Calculation as per (NEMA SM23, API 610, API 617, API 661 and API 650) • Flanges(Raised & Flat Face, Reversed, Clamped hub) calculations • Isometric Stress Sketches and Civil info Sheets • Proper design of firefighting pipes supports and bracing as per NFPA 2010 chapter 9. • Buried Piping (ASCE, ALLA, PENG, AWWA, NEN 3650). Highlights ASME (B31.1, B31.3, B31.4, B31.8, Sec. Viii Div1); Autocad Plant 3D; AFT Fathom Impulse; Autopipe; Bentley Hammer; Bentley Water Gems; Caesar II; CADWORX; Fluid Networks Computation; Hangers And Springs Selection; Navis Work; Pipe Flo; Pipe Supporting; PRG 2011 (Nozzle Pro, Fe-Pipe, Fe-Bend, Fe-Sif); Revit Mep; Smart Plant 3D; Static & Dynamic Stress Analysis; Surge Analysis; Wall Thickness Calculations; PDMS

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspecti... Read more

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspection using 7 QC tools. ➔ Inspected product designs prior to use and producing the product as per customer recruitments. ➔ Preparing PPAP documents and maintaining logs for management to review. ➔ Investigated in-process non-conformance and effectively determined the scope of the non-conformance and configured NCR reports. ➔ Communicated to peers, manufacturing and maintenance personnel and taking preventive action using WHY-WHY analysis. ➔ Performing JH activity and maintaining 5S while using work habits. ➔ Documented and presented the machine non conformances and products failure in Quality TPM. ➔ Attending customer complaints and preparing 8D reports. Additional Technical Qualifications : ➔ PDMS Pipe modeling as per P&ID and study piping including necessary line slopes, instrumentation, valves and special purpose items. ➔ 3D modelling of Equipment, pipework, Structure, Draft, isodraft in PDMS. ➔ Pipe rack and expansion loop design. ➔ Piping material specification and valve data sheet. ➔ 3D modelling of Support Modelling using MDS. ➔ Preparation of material specification and MTO. ➔ Pressure design of pipe and components. ➔ Wall thickness, branch reinforcement &PT rating etc. ➔ Flexibility analysis of piping systems. ➔ Stress intensification factor calculations. INDUSTRY KNOWLEDGE : ➔ International design codes & dimensional standards. ➔ ANSI/ASME, API, BS, ASTM & their use in design & analysis. ➔ PFD & P&ID drawing, process equipment & plant layout Statutory bodies & regulations. ➔ Geometric Dimensioning & Tolerancing.. ➔ Production Part Approval Process (PPAP). ➔ Total Productive Maintenance (TPM). ➔ Manufacturing Engineering. ➔ Root Cause Analysis. ➔ ISO Standards.

My name is Allabaksh Bagali, I am a Mechanical Design Engineer, Having 3 years of experience in Design field. I define myself as a confident, creative person who constantly looks forward for improvisa... Read more

My name is Allabaksh Bagali, I am a Mechanical Design Engineer, Having 3 years of experience in Design field. I define myself as a confident, creative person who constantly looks forward for improvisation. Familiar with softwares like, Autocad 2D and 3D, Solid Works, Catia V-5, Solid Edge., and many more. I'm having an Experience in 2D drawing, 3D modeling, and visualization. First, you can send me your design requirements in terms of: Picture freehand sketch 2d file Second, you can get according to your request: 3d model for your design. 2d Manufacturing Drawing for each part. Assembly of multiple parts. 2d Assembly Drawing. 3D rendering parts Exploded & Collapsed view for your design. Animation video for your design. photorealistic view (Video & photo). Rendering. stl file -- (For 3d Printing). dxf file -- (For Laser or CNC Cutting). Demonstrated advanced CAD skills in creating new components/ assemblies and analyzing existing designs to implement mechanical improvements while reducing costs. Designed and implemented numerous engineering changes to increase trailer quality as well as efficiency using Solid Works CAD software. Produced detailed manufacturing drawings of heavy recycling equipment from specifications and parametric models using 3D CAD software. Analyzed and recommended CAD system resulting in greater flexibility, efficiency, and ability to outsource components. Provided Design and Documentation per ANSY Y14.5 and GD & T Added geometric dimensioning and tolerance (GD & T) to blueprints. As a HVAC Design Engineer Some of my Skills are: • Heat Load Calculation by manually and using HAP software following ASHRAE Standards. • Duct design by manually and using duct design software. • Air Distribution System by Velocity Reduction Method, Equal Friction Method and Static Regain Method following SMACNA Standards. • Chilled water piping design as per ASHRAE standard. • ESP Calculations for Fans & Blowers. • Evaporator cooling coil selection. • Ventilation design as per ASHRAE 62.1, 62.2 standards. • Stairwell pressurization system Designing. • Car Parking ventilation and fresh air system Designing. • Kitchen ventilation and fresh air system Designing. • Head Loss calculation for Primary & Secondary Pump system. • Chilled water pumps, condenser water Pumps Selection and power calculation. • Selection of Chillers, AHU’S, FCU’S, Exhaust Fan, Blower, Window AC, Cooling Tower, Desert Cooler and other Equipment’s. • VRV Machine placement, duct sizing, pipe design and routing. • Selection of VRV Indoor and Outdoor units with respect to diversity factor 120%. • Project Planning of various Hotels, Shopping Malls and Hospitals by using VRV system. • Tender drawing Preparation. • Mechanical Quantity Survey and Bill of Quantity (BOQ) preparation. As a HVAC Draughtman Some of my Skills are: • Preparation of Design & Shop Drawings. • Drafting of Duct Layouts for AHU, FCU, and Package Units. • Drafting of Roof Plan for HVAC Equipment. • Drafting of chilled water Piping Riser Diagram. • Detailed drafting of all HVAC details. • Drafting of HVAC Schematics for central air systems and chilled water systems. • Drafting of Refrigerant Piping, chilled water piping design. • Drafting of VRV & VRF systems. • Drafting of Pipe sizing and Riser diagram of VRV and VRF System.

im a professional steel detailer with 10+ years of experience using Tekla Structures, AutoCAD, and SolidWorks. I specialize in fabrication drawings, CNC/DXF files, GA/shop drawings, and 3D modeling fo... Read more

im a professional steel detailer with 10+ years of experience using Tekla Structures, AutoCAD, and SolidWorks. I specialize in fabrication drawings, CNC/DXF files, GA/shop drawings, and 3D modeling for steel structures. I have worked on industrial platforms, pipe racks, staircases, and cement plant structures. My work is accurate, fabrication-ready, and always aligned with international standards.

“ Graphic Designer especializad in Packaging and a 3D Artist with extensive experience. Available for product development and remote work, Preludio Design creates stunning packaging designs and brings... Read more

“ Graphic Designer especializad in Packaging and a 3D Artist with extensive experience. Available for product development and remote work, Preludio Design creates stunning packaging designs and brings concepts to life with realistic three-dimensional images. With a creative approach, proven expertise, and the ability to work remotely, Preludio Design is the perfect choice to take your ideas to the next level." If you need any further adjustments or any other assistance, feel free to ask.

Professional engineering experience in various industries including aerospace, tool & die, injection molding, die casting and plastics industries. Hands on experience in small business operations, pr... Read more

Professional engineering experience in various industries including aerospace, tool & die, injection molding, die casting and plastics industries. Hands on experience in small business operations, product design, reverse engineering and 3D inspection, marketing, invention development, 3D laser scanning, FEA analysis, and sales engineering.

“I turn complex engineering ideas into functional, simulation-verified designs.” I’m Alfred Kareem, a Mechanical Design Engineer with a passion for precision design, simulation, and real-world innovat... Read more

“I turn complex engineering ideas into functional, simulation-verified designs.” I’m Alfred Kareem, a Mechanical Design Engineer with a passion for precision design, simulation, and real-world innovation. I specialize in 3D CAD modeling and performance-driven analysis using SolidWorks and ANSYS to bring powerful mechanical concepts to life. Over the past few years, I’ve worked on high-level design challenges ranging from structural brackets and adjustable phone stands to aerospace-inspired components and electronic cooling systems. My work fuses creativity with engineering accuracy — grounded in real-world constraints like manufacturing processes, material strength, and performance under load. What I Do Best • 3D CAD Modeling: Parts, assemblies, surface and sheet metal components • Product Design for Manufacturing: 3D printing, CNC, and plastic molding • Simulation-Driven Engineering: FEA, static/thermal analysis, motion studies • Design Documentation: 2D drawings, BOMs, exploded views, render-ready outputs • Aerospace-Inspired Design Thinking: Weight-saving, modularity, optimization Project Highlights • Designed a sleek, adjustable phone stand with proper fastener integration, exploded views, and dimensioned drawings • Developed a wall-mounted foldable laptop stand with motion control and hinge-based design • Contributed to the CANSAT Aerospace Design Challenge, handling the mechanical design and CAD model of a deployable satellite casing system • Simulated thermal management systems (heat sinks) for electronic components using ANSYS • Built mechanical assemblies for small-scale robotics and mechanical linkage Education & Certifications • B.Eng. Mechanical Engineering • Certified in SolidWorks CAD Modeling • Certified in ANSYS Simulation & Thermal Analysis • Aerospace Systems participant in CANSAT Nigeria Challenge • Technical documentation and project management with Microsoft Office tools Whether you're a startup prototyping your next product, a research team needing clean CAD and simulations, or a company looking for a mechanical partner, I’m here to design, validate, and deliver. Let’s Work Together: Message me to start your project , I’ll turn your idea into a working, optimized design. Engineering is more than drawing, it’s designing a solution. Let’s build yours.

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mi... Read more

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mixture of experience, problem solving and creativity — that’s why we love it. Have a look around the website to see what we do and if you have a prototype that needs building or a product that needs designing, don’t hesitate to get in touch.

I am a Graduate in Mechanical engineering with 11 years of experience in Design field.

I am a Graduate in Mechanical engineering with 11 years of experience in Design field.