Hire the best freelance Machinery Development expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Mos experienced I am at non-standard machinery design, such as conveyor systems for bulk transporting, ammo manufacturing lines. Also, I am familiar with injection moulding design and 3D printing. I d... Read more

Mos experienced I am at non-standard machinery design, such as conveyor systems for bulk transporting, ammo manufacturing lines. Also, I am familiar with injection moulding design and 3D printing. I dig deeper then I could say that my strong sides are Sheet metal assemblies design, Machined parts design and plastic parts design. One of my accomplished projects is a bulk handling facility for the biggest chicken farm in Latvia. I have graduated Riga Technical Univerity and gained a Masters degree in Mechanical Engineering and manufacturing technology. If you have some additional questions about my experience feel free write to me personally.

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for... Read more

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for hardware start-ups, SME's and crowd-funded projects from all over world. Fostering design innovation to optimize functionality, aesthetics and manufacturing costs. Combining radical ideas with technical expertise to make unique and leading products. With expertise in design and prototyping, I am seeking clients who need innovative engineering solution for their businesses. Expertise: * Design innovation. * Concept development. * Product engineering. * System engineering. * Design and cost optimization. * Functional prototyping. * Vendor sourcing for industrial manufacturing.

I am a mechanical engineer with more than ten years of experience in the field. (You can see my portfolio below). In the last 14 years, I've been designing different types of machines, parts, and asse... Read more

I am a mechanical engineer with more than ten years of experience in the field. (You can see my portfolio below). In the last 14 years, I've been designing different types of machines, parts, and assemblies. Additionally, I have "hands-on" experience assembling those designs in real life. I am an expert in Autodesk Inventor modeling and have experience working in Solidworks. I'm strongly familiar with different manufacturing technologies and know how to prepare blueprints from preliminary design up to full- detail design, including plans for welders, CNC, lathe, and more. I read, write, and speak Ukrainian, Russian, and English. For the last 5 years, before the war came to my home country, I had been building my own fish cannery. In addition to my engineering design skills, I know computer programming at a level that was sufficient to launch an e- commerce business that has been working for the last 6 years (www.tushe.od.ua). I'm a self-taught individual, and I have no issue learning new technical skills and am not afraid of new challenges. Skills • Mechanical Engineering, Product Development, Machines and Parts Assemblies (14 years of experience. Portfolio available below). • Autodesk Inventor (18 years of experience; first version used was Autodesk Inventor 9.0, 2005). • SolidWorks (2 years of experience). • 3-axis CNC milling machine operation (Some experience in creating G-codes and milling parts from steel, aluminum, plastic, and wood). • Manual Lathe and Milling Machines (Some experience). • TIG and MIG welding (5 years of experience). • JavaScript, CSS, SQL, PHP (Basic/Moderate. In 2019, created an online store from scratch for my brand of canned food "Tushe" at www.tushe.od.ua). • Adobe Photoshop, Illustrator (Created designs for my brand "Tushe"). • Microsoft Project (Some experience). • Other Skills (Food Machinery, Sheet Metal Fabrication, Electrical Design, Conveyor Systems, 2D Drawings, Hand Tools, Burning Torch, Prototyping, Plumbing, Air and Water Piping Systems).

I love my work, designing is my passion, I would not have done it for more than 30 years if I did not love it. In my career to date, I have had the opportunities to have worked in a wide range of indu... Read more

I love my work, designing is my passion, I would not have done it for more than 30 years if I did not love it. In my career to date, I have had the opportunities to have worked in a wide range of industries within the mechanical design field and have learned from the best.

I’m a Mechanical Design Engineer with experience in 3D modeling, product design, and engineering drawings using SolidWorks. I specialize in creating parts, assemblies, and technical drawings for manuf... Read more

I’m a Mechanical Design Engineer with experience in 3D modeling, product design, and engineering drawings using SolidWorks. I specialize in creating parts, assemblies, and technical drawings for manufacturing and 3D printing. I’ve worked on projects in production lines and machinery , focusing on functional and cost-effective designs. I'm reliable, detail-oriented, and always aim to deliver high-quality work that meets real-world needs.

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machi... Read more

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machine from concept to prototype, and prototype to commercial product. Designed Ultra High Level vacuum systems, Radiation Shielding, Product Handling, Test Rigs, High Voltage Electrical Enclosures etc. I also work for, and have worked for several multinational engineering corporations developing and automating production equipment, test rigs; and am an registered Incorporated Engineer (I Eng) with the Institute of Mechanical Engineers.

- Hey Peeps! I am working as a junior scientist in passenger drone research Pvt Ltd. A tech startup working on the development of the autonomous air taxi in India. - Former Team lead @Formula stu... Read more

- Hey Peeps! I am working as a junior scientist in passenger drone research Pvt Ltd. A tech startup working on the development of the autonomous air taxi in India. - Former Team lead @Formula student Racing team - Strong mechanical concepts helps me to Innovate things - It's Fun to help people building their on-paper concept - More importantly, I love my profession

I am an Engineering Manager based out of Tennessee, with nearly 20 years of experience spanning industries. My professional experience includes time working in Aerospace, Aviation, Civil, General Manu... Read more

I am an Engineering Manager based out of Tennessee, with nearly 20 years of experience spanning industries. My professional experience includes time working in Aerospace, Aviation, Civil, General Manufacturing, Industrial Machinery Design, Recreational Vehicle and Heating & Air Conditioning. I live and breathe engineering and look forward each day to building my own skills as well as training up others with a similar love for this work. I am a passionate engineer and started my career as a Machinist when I was just 15 years old in France. Since then, I’ve continued to play a hands-on role in designing machinery that helps customers stay competitive. I am passionate about my craft, about my team, and about helping companies do their best work.

I am a mechanical Design engineer. Well experienced in variety of projects. I am here to find some Different work atmosphere and work experience. Designing Consumer products is my passion.... Read more

I am a mechanical Design engineer. Well experienced in variety of projects. I am here to find some Different work atmosphere and work experience. Designing Consumer products is my passion. I can do clear and professional machine shop drawings (2D Drawing) for each and every stage of your product whether it is new or Reverse engineered. I am also a 3d modeler, and can do any geometrical and Non-geometric Designs with the perfect 3D rendering with mechanical animation. I am passionate with the concept wise machine design, because it is challenging and the best way to explore my talents. Let’s work together and innovate something new.Don’t hesitate to give simple works. I can also do it to get a good contact with the best clients like you. Thank you.

I’m a Mechanical & Product Design Engineer with strong experience in SolidWorks and Fusion 360. I specialize in creating functional, realistic, and manufacturing-ready designs for startups, inventors,... Read more

I’m a Mechanical & Product Design Engineer with strong experience in SolidWorks and Fusion 360. I specialize in creating functional, realistic, and manufacturing-ready designs for startups, inventors, engineers, and 3D printing enthusiasts. What I deliver: Detailed 3D CAD models Fully constrained mechanical assemblies Simulation (structural, motion, airflow basics) Manufacturing-ready drawings STL files optimized for 3D printing Fast turnarounds and clear communication Software: SolidWorks | Fusion 360 | KeyShot | Ansys If you have an idea, concept sketch, existing part, or full product you want developed, I can turn it into a professional 3D model, ready for manufacturing or prototyping. Let’s bring your design to life.

I am a Mechanical Engineer specialized in Autodesk Inventor for industrial equipment design, precision 3D modeling, complex assemblies, and manufacturing-ready technical drawings. My experience includ... Read more

I am a Mechanical Engineer specialized in Autodesk Inventor for industrial equipment design, precision 3D modeling, complex assemblies, and manufacturing-ready technical drawings. My experience includes machinery development, jigs & fixtures, assembly tools, structural components, and metal fabrication design. I deliver: High‑precision 3D models (IPT, IAM) Parametric assemblies with clean structure ISO/ASME manufacturing drawings (IDW, DWG, PDF) Sheet metal, weldments, mechanisms STEP/IGES files for manufacturing Optimization for production and cost reduction My work focuses on accuracy, clean geometry, and industrial standards. I communicate clearly, deliver fast, and ensure all models are ready for fabrication.

Industrial Designer with a holistic focus on systems integration and specialized machinery development. My experience goes beyond digital modeling; it is grounded in the balance between technical desi... Read more

Industrial Designer with a holistic focus on systems integration and specialized machinery development. My experience goes beyond digital modeling; it is grounded in the balance between technical design in SolidWorks, industrial programming, and operational viability on the production floor. I have participated in industrial integration projects where a deep understanding of control systems (Fanuc, Mitsubishi, RichAuto) and the interaction between mechanical components are critical. My perspective allows me to evaluate projects from three angles: technical design precision, real manufacturing efficiency, and the strategic vision of project management. My goal is to deliver engineering solutions that harmonize technical complexity with productive efficiency, ensuring that every integration is functional, scalable, and ready for the challenges of today's industry.

I’m James Martin Adhikary, a passionate and experienced system designer and industrial automation expert. With years of hands-on involvement in mechanical design, custom machinery development, and eng... Read more

I’m James Martin Adhikary, a passionate and experienced system designer and industrial automation expert. With years of hands-on involvement in mechanical design, custom machinery development, and engineering innovation, I specialize in creating practical and scalable solutions for manufacturing, processing, and automation needs. As the founder and lead system designer at CADSON Engineering and Services, I’ve led the design and deployment of a wide range of customized equipment including automatic roti-making machines, hydraulic conveyors, portable telescopic belts, slat conveyor systems, and large-scale cooking automation setups. My strength lies in blending creative engineering with real-world usability. My Skills Include: CAD design (SolidWorks, AutoCAD, Fusion 360) Mechanical system design and prototyping Industrial automation layout planning Hydraulic and conveyor system development Fabrication-ready 2D & 3D technical drawings Client-focused solution development I take pride in delivering not just designs, but real solutions that solve operational problems, boost efficiency, and scale industrial capabilities. Let’s bring your ideas to life — with precision, innovation, and purpose.

As a professional mechanical designer, I leverage my expertise to create innovative and efficient solutions for a wide range of engineering challenges. My core strengths lie in translating conceptual... Read more

As a professional mechanical designer, I leverage my expertise to create innovative and efficient solutions for a wide range of engineering challenges. My core strengths lie in translating conceptual ideas into detailed technical drawings and specifications, utilizing CAD software proficiently to ensure accuracy and manufacturability. I possess a strong understanding of material properties, manufacturing processes, and design principles, enabling me to develop robust and cost-effective designs. Throughout my career, I have successfully contributed to numerous projects, encompassing product design, machinery development, automation systems, etc. I am adept at collaborating with cross-functional teams, including engineers, manufacturers, and stakeholders, to ensure seamless project execution from concept to completion. My educational background in mechanical engineering has provided me with a solid theoretical foundation, which I continuously expand through ongoing professional development and staying abreast of the latest industry advancements. I am committed to delivering high-quality designs that meet client requirements and exceed expectations.

✅ Full-time Freelancer with Extensive Professional Experience in Concept & Reverse Design Engineering, 2D/3D CAD Modeling, Photorealistic Product Rendering, and ROS controlling, testing & debugging.... Read more

✅ Full-time Freelancer with Extensive Professional Experience in Concept & Reverse Design Engineering, 2D/3D CAD Modeling, Photorealistic Product Rendering, and ROS controlling, testing & debugging. ✅ I am professionally a Mechanical & Robotics/Automation Engineer with 4+ years of experience. I am proficient in, • New concept R&D design & development of any Mechanical/Machine system, Conveyor system, Robotic Arm with Gripper, etc. • 3D modeling, 2D drawing, Engineering Drawing using SolidWorks, and Inventor • Have worked with many companies in the world, from startups to corporate R&D groups (E.g., Pick & Place object arm, automatic pouring & serving wine to the glass, vending machines, etc.) • Also experience in working with actuators/motors in machinery development • Brief evolution in Reverse engineering projects • 3D model character design including rendering/animation utilizing Blender and Keyshot • Passion for solving diverse challenges I am good in, • Path planning and navigation system planning for a system on ROS • Also Familiar with UiPath, RoboDK, Factory IO, and Siemens PLC ✅ I am eager to work with you to fulfill your expectations; this helps us to maintain a Long term future relationship. Please get in touch with me to discuss your project more.

Ignomagine Robotics and Automation is at the forefront of revolutionizing industries through cutting-edge robotics and custom automation solutions. With a dedicated team of experts spanning mechanical... Read more

Ignomagine Robotics and Automation is at the forefront of revolutionizing industries through cutting-edge robotics and custom automation solutions. With a dedicated team of experts spanning mechanical design, electronics engineering, embedded systems, software development, AI, machine learning, industrial sourcing, and business strategy, we are committed to addressing industrial challenges with innovation and expertise. As a premier engineering service provider and product developer, Ignomagine offers a comprehensive range of services tailored to meet the unique needs of our clients: Product Development Consultancy: From inception to fruition, we partner with clients to transform their ideas into tangible, market-ready products. Our consultancy services encompass every stage of the development process, including conceptualization, design, prototyping, full-scale product development, vendor assessment, and knowledge transfer for sustainable growth. Engineering Services: Leveraging our multidisciplinary team's expertise, we provide a wide array of engineering services, including software development, electronics system development, source code development, PCB prototyping, fabrication, and custom machinery development. Our holistic approach ensures seamless integration and optimal performance across all facets of the project. Products: Ignomagine offers an impressive lineup of innovative products designed to enhance efficiency, productivity, and safety in various industrial settings. Our product portfolio includes automated guided vehicles, autonomous mobile robots, mobile robots for surveying and surveillance, robotic arms, XYZ robots, polar robots, electric trolleys, and automatic raising bollards. Each solution is meticulously engineered to deliver exceptional performance and reliability, meeting the evolving needs of modern industries. At Ignomagine Robotics and Automation, we are driven by a passion for innovation and a commitment to excellence. By harnessing the power of robotics and automation, we empower industries to thrive in an increasingly competitive landscape, driving progress and prosperity for businesses worldwide.

I am a design draftsman with over 25 years engineering industry experience You will see that I draw on a practical trade background as I am a qualified fitter & turner, a qualified draftsman and hold... Read more

I am a design draftsman with over 25 years engineering industry experience You will see that I draw on a practical trade background as I am a qualified fitter & turner, a qualified draftsman and hold a diploma in engineering. Having worked as a tradesman, a supervisor, a draftsman and a project manager, I choose to work as a draftsman as this is the occupation I enjoy most & I continue to develop my computer aided design skills, hold my own Solidworks 2014 software license and workstation. Using Solidworks 2007 to 2015, AutoCAD and Unigraphics I have: - Modelled & designed sheet metal parts, profile cut, machined and fabricated components, weldments and assemblies. - Created detailed manufacturing drawings as well as the DXF, step & PDF files required for laser/plasma cutting, CNC bending and component production. - Revised & updated engineering drawings & 3D models. - Upgraded designs to ensure compliance with the relevant Australian standards. -Redrawn engineered products from samples to develop new products. -Supported purchasing, production/manufacturing departments and provided images and data to salespersons. I have worked in foundries, sugar mills and manufacturing facilities on diverse equipment. My recent clients include: - Tripp Industries Yatala, drawing sheet metal components, balustrades and stairway systems. - Mining Machinery Developments Australia (MMD Australia) – mineral sizers. - G20 Environmental Solutions, Singapore - waste to energy plants. - Ground Probe, Windsor – earthworks monitoring radar systems. - Air Design, Meadowbrook – air handling units. - Geoteknic Tingalpa – coal seam gas instrumentation. - Drone X Labs, Coomera – unmanned aerial vehicles, - JJ Richards Engineering, Underwood – truck bodies for waste collection, - Rock Crush Group, Burleigh – mining dredgers, cable trailers, winches, hydraulic power packs. I have a sound understanding of engineering methods and management and I am committed to workplace safety. I’m comfortable working as a team member, alone & with minimal supervision, or as an external contractor. You will find me reliable, punctual and self motivated. I look forward to discussing this opportunity with you, Sincerely, Ian Hawkins 0449 222 445

Design a plastic products. Product Development from design idea to designs manufacture ability, realizes sample tooling, product samples and prototypes. Determines the most suitable manufacturing conc... Read more

Design a plastic products. Product Development from design idea to designs manufacture ability, realizes sample tooling, product samples and prototypes. Determines the most suitable manufacturing concepts related to planned manufacturing quantities, quality requirements and manufacturing location

jig fixture gauges sheet metal design press tool design spm design checking fixtures biw fixture design cad cam unigraphics machine design heavy machinery CATIA special purpose machine design Design

jig fixture gauges sheet metal design press tool design spm design checking fixtures biw fixture design cad cam unigraphics machine design heavy machinery CATIA special purpose machine design Design

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed e... Read more

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed electro-mechanical products, machinery and systems for a wide variety of industries. Generated winning proposals and developed customer relationships. Innovative conceptual designer. Inventor of patented industrial machinery products. Solid track record leading profitable new product development. Registered Professional Engineer. Specialties: Machine designer with proven abilities to drive innovative new product development

Mechanical Engineer (B.Tech in Mechanical Engineering) with 12 years of experience in Engineering Design, Engineering Calculation, Design and Development of Special Purpose Machine. Working Experienc... Read more

Mechanical Engineer (B.Tech in Mechanical Engineering) with 12 years of experience in Engineering Design, Engineering Calculation, Design and Development of Special Purpose Machine. Working Experience: Material Handling Equipment Cement Plant Steel Plant Special purpose machines

I’m a Mechanical Design Engineer with 6 years of experience specializing in New Product Development (NPD) and Special Purpose Machine (SPM) design. I offer end-to-end mechanical solutions—from concept... Read more

I’m a Mechanical Design Engineer with 6 years of experience specializing in New Product Development (NPD) and Special Purpose Machine (SPM) design. I offer end-to-end mechanical solutions—from concept and 3D modeling to FEA validation, engineering calculations, and production-ready documentation. My core skills include: 3D CAD Modeling using Solid Edge, SolidWorks, AutoCAD, and [other tools you use] Design and development of custom machinery and automation equipment Finite Element Analysis (FEA) for structural validation and optimization Engineering calculations (stress, deflection, torque, drive sizing, etc.) Preparation of detailed manufacturing drawings, GD&T, and BOMs I’ve worked across various industries, delivering robust, cost-effective, and production-ready designs. Whether you need to bring a new product to life or optimize an existing machine, I can provide practical, engineered solutions that perform in the real world.

Machine Designer: I'm a machine designer having graduation in Mechanical Engineering and post graduation in Plastic Engineering with 7 years experience in Machine Design and Project management in Mach... Read more

Machine Designer: I'm a machine designer having graduation in Mechanical Engineering and post graduation in Plastic Engineering with 7 years experience in Machine Design and Project management in Machine Development. I have recently worked in InspirOn Engineering involving Textile Machinery as a Dy. Manager in Project Development, where my responsibilities included Design the machine, Manufacturing and testing of Machine. My responsibility also included cost management and customer satisfaction. My experience creating customize machines in different segment segments like Textile, Plastic, Investment casting & Automation Projects including Concept generation,Design Calcualtion,3 D Modelling, Drawing Inspection,DFA,DFM Maintence, Safety, Costing, Ergonomics, Aesthetic & Geometrical Dimension & Tolerances. I have consistently delivered projects on time and under budget, which has earned me the role of Project Leader in my Last Company. I believe my skills would be ideal for your project.

Been experiencing design and development in agricultural equipment &machinery, tractor hydraulics, automotive shock absorbers over 10 years.

Been experiencing design and development in agricultural equipment &machinery, tractor hydraulics, automotive shock absorbers over 10 years.