Hire Machine Design Designers in United States

I currently work for a company that specializes in industrial refrigeration. I was a CAD instructor at a 3 county vocational school for 25 years where I taught high school students Cad architectura... Read more

I currently work for a company that specializes in industrial refrigeration. I was a CAD instructor at a 3 county vocational school for 25 years where I taught high school students Cad architectural and Mechanical Drafting. Before that I worked for a parking meter company as a cad and board design drafter. I have freelanced for over 15 years in Architectural residential drafting, patent drawings, and Mechanical drafting. And I am ADDA Certified in both Architectural and Mechanical drafting. I must admit, I love to draw.

I can create anything from sketching to fully rendered 3D models.

I can create anything from sketching to fully rendered 3D models.

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a principle I... Read more

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a principle I live by and I understand that designs should be manufacturable. I have knowledge of and experience with various fabrication processes including but not limited to 3D printing, machining, and welding. My professional certification was given to me by Texas after rigorous testing and peer review. My area of testing was in Machine Design and Materials. I can perform FEA analysis and make sense of the results, allowing me to make good engineering recommendations for a given problem. I have spent the majority of my professional career designing dP (differential pressure) flow meters in accordance to ASME Boiler and Pressure Vessel Code as well as the accompanying ASME B31 series. I am very familiar with reading codes and standards and designing accordingly. This experience has also given me a strong understanding of GD&T. I am a good fit and so are my designs.

I am a self-employed Mechanical Designer who takes concepts and/or sketches and create working drawings for a fabrication shop using Solid Works and/or Auto CAD. I have an extensive background in mech... Read more

I am a self-employed Mechanical Designer who takes concepts and/or sketches and create working drawings for a fabrication shop using Solid Works and/or Auto CAD. I have an extensive background in mechanical, electrical, controls, PLC, CNC, etc, both hands on and design. With that combination you get the best of both worlds! Please view my website!www.ascmechanicaldesignservice.com

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have d... Read more

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have designed equipment for many different industries; aluminum & steel mills, automotive assembly plants, assembly work cells, petrol/chemical plants, pharmaceutical plants. let me put my years of design experience to work for you.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

Mechanical Design Engineer Certified SolidWorks Expert 10+ years SolidWorks Experience 6+ months CAD Crowd Freelancing Experience BS Mechanical Engineering with professional experience in OEM and Re... Read more

Mechanical Design Engineer Certified SolidWorks Expert 10+ years SolidWorks Experience 6+ months CAD Crowd Freelancing Experience BS Mechanical Engineering with professional experience in OEM and Reverse Engineering prototype and design. Wide range of product design knowledge including sheet metal structures, weldments, injection molding, casting, machining, and more. Worked on a high level engineering team of over 40 cross-fuctional engineers that release highly regulated casino gaming cabinet hardware and software for commercial use worldwide. Bring products from ideas to production ready parts and assemblies prepped for mass production. Consistently deliver accurate models and manufacturing drawings to companies to help bring their products to market quicker and with less risk.

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsda... Read more

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsdale, AZ. ► Designed & Engineered WORLD'S most advanced luxury wallet, medical equipment, industrial components, products & more at: ♦VIEW PORTFOLIO & EXHIBIT:♦ w w w . lovesobhani . c o m From napkin-sketch to fully-functional final prototype, he's been there every step of the way. He's designed & engineered entire products (electrical, software & mechanical aspects) for nearly a decade on a contractual basis with prophetic proficiency. This created a multi-specialty Prototype & Design Engineer that is a super talented, professional expert with many intricacies of: ► Product Design & Engineering ► CAD Modeling ► ElectroMechanical Design & Engineering ► Realistic Rendering ► DFM (Design for Manufacture) Techniques ► Component Design ► Circuit & PCB Design ► Product Development & Optimization ♦ FULL PROFESSIONAL EXPERIENCE: ♦

Solidworks and Solid Edge design engineer specializing in electro-mechanical machine design. Professional experience includes fall protection/material handling, rotary heat exchangers, robotics, and f... Read more

Solidworks and Solid Edge design engineer specializing in electro-mechanical machine design. Professional experience includes fall protection/material handling, rotary heat exchangers, robotics, and food handling machine design. Glad to join in on the creative process and turn an idea into reality.

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

I have a mechanical engineering bachelor's from the University of Kentucky. I have been a mechanical designer working with companies such as Toyota, John Deere, Hino, and others since 2010. I have u... Read more

I have a mechanical engineering bachelor's from the University of Kentucky. I have been a mechanical designer working with companies such as Toyota, John Deere, Hino, and others since 2010. I have used SolidWorks, Inventor, AutoCad, and DraftSight to complete manufacturing machine designs as well as tooling/jig design and modifications. Currently I am using SolidWorks for design projects.

Senior Mechanical Design Engineer with 20+ years of experience in product design, mechanical engineering, and custom machine design. Certified SolidWorks Expert (CSWE) with a professional SolidWorks l... Read more

Senior Mechanical Design Engineer with 20+ years of experience in product design, mechanical engineering, and custom machine design. Certified SolidWorks Expert (CSWE) with a professional SolidWorks license, specializing in transforming concepts into manufacturable, production-ready products through innovative design, precision 3D modeling, and engineering analysis. Skilled in developing complex mechanical and electromechanical systems for industrial or commercial use. Proven track record in design for manufacturing (DFM), prototyping, and full product lifecycle development—from concept and digital modeling through fabrication, testing, and final assembly. Core competencies include product design and development, parametric 3D modeling and drafting, and Design for X principles (manufacturing, cost, maintenance, and functionality). Skilled in precision drafting, GD&T application, and both static and dynamic mechanical analysis, including FEA for structural optimization and performance validation. Proficient in SolidWorks with certifications in Mechanical Design and Simulation, and advanced expertise in SolidWorks API programming and design automation. Experienced in PDM systems and CAD data management to ensure efficient workflows, version control, and documentation integrity throughout the product development process. Project experience includes: manufacturing machinery, conveyors, and material handling systems; integrated robotic and industrial automation systems; laboratory automation equipment and custom fixtures; medical diagnostic and test equipment; fiber-optic component assembly systems; valve actuation and control mechanisms; robotic end-effectors, manipulators, and vacuum-compatible robotic assemblies; military equipment design and defense system components; industrial silos, ductwork, and piping systems; as well as precision optical assemblies and complex electromechanical systems. Capable of taking on full-cycle mechanical design projects and integrating seamlessly with cross-functional engineering teams. Skilled in creating innovative, efficient, and manufacturable designs tailored to application-specific requirements.

Mechanical designer with 7+ years of experience developing custom automation equipment and mechanical systems. Advanced SolidWorks user specializing in complex assemblies, manufacturing drawings, and... Read more

Mechanical designer with 7+ years of experience developing custom automation equipment and mechanical systems. Advanced SolidWorks user specializing in complex assemblies, manufacturing drawings, and machine design. Experienced in designing EOAT tooling, conveyors, palletizing systems, and robotic automation equipment. Strong hands-on background working with fabrication, machining, and installation teams to bring designs from concept to production-ready systems.

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as... Read more

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as a CNC machinist and toolmaker Own small machine shop-specializing in prototype machining and development. i have 3 axis milling capability with a HAAS VF3 CNC machining center, I also have both CNC and manual lathe, 3-D printer, 4 axis router, 4 axis laser Diode and IR) for engraving and cutting of thin metals , TIG and MIG welding, surface grinding, and extensive experience in CNC programming, and fixture design for machining . My primary focus is prototype development, and design for manufacturing. I prefer to deign and build small mechanism and machine components.

I have more than 30 years of experience in the manufacturing field with a focus on medical product development including equipment design and process development. I have spent the last 4 years workin... Read more

I have more than 30 years of experience in the manufacturing field with a focus on medical product development including equipment design and process development. I have spent the last 4 years working as a consultant doing both medical device product design as well as designing automated assembly and test equipment. For the medical device design, a major portion of the work involved identifying and qualifying manufacturing partners that would be used and then implementing manufacturing procedures and processes as required. I would work with the vendors to identify cost effective plans for startup manufacturing and develop prototypes that allowed us to verify design intent as well as test and verify production methods and procedures. I also worked with the vendors to establish a longer term ramp plan as quantities to be produced increase. My consulting work also included designing and building several pieces of semi-automated assembly and test equipment for use in clean rooms by medical device manufacturers.

Degreed mechanical engineer. Machine Design Services AutoCAD 2016 and SolidWorks 2016 see web page www.clweng.com

Degreed mechanical engineer. Machine Design Services AutoCAD 2016 and SolidWorks 2016 see web page www.clweng.com

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a Product and Mechanical Designer. Much of my career is involved in computer aided design of components for the aerospace, transportation and medical device industries. I am also a US Navy vetera... Read more

I am a Product and Mechanical Designer. Much of my career is involved in computer aided design of components for the aerospace, transportation and medical device industries. I am also a US Navy veteran.   While working at United Launch Alliance (ULA) I supplied 3D CAD models from the engineering group to the tooling supplier enabling concurrent design of manufacturing tooling. I also supported the ordnance group by designing a stage separation component test stand.   I have also designed more than 450 FAA certified components for the Adam A500 aircraft. I find that wherever I have worked, I bring three key strengths to the table: CAD expertise, component design and invariably I have gained a reputation as the GoTo guy to support high value projects.   I have a passion for designing products that are making a positive impact on the environment. On my personal time I have designed concepts for Smoker, furniture and environmentally friendly lawn and garden power equipment. I am looking for a position that uses my skills, experiences and passion for product design to support your engineering group.

25 years mechanical design experience across a broad range of equipment, which includes: 1. Large machines 2. Packaging machines 3. Various product manipulation and handling mechanisms 4. Micro sized... Read more

25 years mechanical design experience across a broad range of equipment, which includes: 1. Large machines 2. Packaging machines 3. Various product manipulation and handling mechanisms 4. Micro sized medical products 5. Automated and manual fixtures 6. Inspection gages 7. Stamp dies 8. Plastic injection molds 9. Metal castings 10. Structural Highly skilled in geometric tolerancing and limits-and-fits.

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in... Read more

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in materials and machine design and specializes in custom mechanical assemblies and automated systems. Specific capabilities include mechanical and electromechanical design, CAD, FEA and design validation, component and assembly manufacturing, procurement, assembly, and testing. Dietrich worked as a Systems Engineer, mechanical engineer, and sr. mechanical engineer. He has developed custom tooling for unique and specific projects. He has designed and manufactured a large scale metal 3D printer. Additionally he has designed equipment for automating processes to speed up manufacturing or reduce labor intensive applications. Dietrich is able to design with a wide variety of materials including alloy steels, aluminum, Inconel and other nickel-based alloys, carbides, and a wide variety of polymers. He has experience with mechanical systems such as linear actuators, miniature and large scale electric motors, combustion engines, pulleys, gears, solenoids, weldments, belts and other drivetrain components. His manufacturing capabilities include CNC milling, CNC turning (lathe), electro-discharge machining, welding, and 3D printing in both polymers and metals. Deliverables include consultation, design, CAD models, 2D manufacturing drawings, manufacturing of custom parts and assemblies, sourcing and selection of off-the-shelf parts, and component and assembly testing and validation.

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentrati... Read more

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentration in Mechanical Systems at California Baptist University. Outside of school, I am heavily involved in the collegiate design competition Formula SAE where I lead a team of six engineering students in designing, fabricating, and validating the chassis and ergonomic systems of Cal Baptist Racings' sixth competing internal combustion racecar. In the past, I have worked in a variety of roles in multiple fields, including electrical, warehouse, and student life, where I have gained experience in teamwork and the execution of engineering solutions. My plan for the future is to continue gaining engineering experience through Formula SAE, summer internships, and scholastic projects.

I have been working 7 days a week since December, so to say I am very dedicated is an understatement. I have owned my online business since 1994 when freelancing was just moonlighting. I am up front... Read more

I have been working 7 days a week since December, so to say I am very dedicated is an understatement. I have owned my online business since 1994 when freelancing was just moonlighting. I am up front, if I don't feel comfortable with your proposed project or am not interested, I will let you know right away. I don't play games and I am an expert in my field which is Solidworks. I have been a project manager more than a few times during employment stints and I completely understand the manufacturing process. I am in expert in taking over projects when a key employee dies, quits, etc. (don't laugh, 3 of my best customers were draftsman or engineers that suddenly died). I have worked on everything from IC chip architecture to sandcastings to very large machinery and even a few urea plants. I am probably faster than your best cad guy and the whole time I am drafting I am also keeping an eye on deadlines, watching out for potential pitfalls such as hard to design parts or sourcing a more common or cheaper component. I am use to doing tab and slots for parts made out of plate, I can etch bent parts for use in laser cutting, know how to properly cope a tube for a laser machine, can use GD&T properly, can properly notate a weld diagram, assembly drawings, etc. My largest project to date (working under a process engineer and with a small team of drafters) was a 6M urea plant in china which was nearly a thousand pages of mechanical information, not to include mass balance info, spec sheets for the components, etc. The package was a 5' long wooden box that had to clear customs. I can source materials from china or other offshore locals and now I have a sub that will be helping me so I can get away from the crazy 7 day a week schedule. I have no problem managing your team, or providing consulting as well. I am starting to steer away from the smaller projects unless you are paying really well as there is a lot of "plate spinning" with a bunch of smaller projects.

I have 16 years of machine design experience using NX software, and currently designing aerospace bearings.

I have 16 years of machine design experience using NX software, and currently designing aerospace bearings.

I am a skilled and innovative 3D Design Engineer with a robust educational background and hands-on experience in mechanical and manufacturing engineering. Holding a Bachelor of Applied Science in Mech... Read more

I am a skilled and innovative 3D Design Engineer with a robust educational background and hands-on experience in mechanical and manufacturing engineering. Holding a Bachelor of Applied Science in Mechanical Engineering and an Associate of Applied Science in Manufacturing Engineering, I am passionate about utilizing my extensive knowledge to drive cutting-edge solutions in complex machine design, injection molded plastics design, 3D printing, and high-speed manufacturing.

Experienced, enthusiastic, and innovative mechanical design engineer with extensive experience in machine and product design, robotics, factory, and production automation.

Experienced, enthusiastic, and innovative mechanical design engineer with extensive experience in machine and product design, robotics, factory, and production automation.

I am a recent graduate from the M.S.E. in Robotics program at the University of Pennsylvania, where I also completed my B.S.E. in Mechanical Engineering. There, I also worked as a researcher in roboti... Read more

I am a recent graduate from the M.S.E. in Robotics program at the University of Pennsylvania, where I also completed my B.S.E. in Mechanical Engineering. There, I also worked as a researcher in robotic design and soft robotics hardware. Much of my experience is in mechanical design, rapid prototyping, soft materials manufacturing, system evaluation, and data analysis.

Mechanical Engineer with seven years of experience in parts design, machine design, and process improvements. Continuously improves methods and reduces time it takes to design subsequent machines. Pos... Read more

Mechanical Engineer with seven years of experience in parts design, machine design, and process improvements. Continuously improves methods and reduces time it takes to design subsequent machines. Possess excellent skills in manufacturing process improvements, reduction in cost of manufactured goods, and engineering practices. Able to operate effectively in a team, and contribute positively to team operations and working relationships.