Hire Design and Analysis Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Master's degree in mechanical engineering with a focus on computational methods and modeling. As a graduate student ambassador at Northeastern University, I have been involved in various academic and... Read more

Master's degree in mechanical engineering with a focus on computational methods and modeling. As a graduate student ambassador at Northeastern University, I have been involved in various academic and extracurricular activities, such as mentoring new students, organizing events, and participating in research projects. I have also gained valuable industry exposure and hands-on skills through my internship at ONGC Mangalore Petrochemicals Ltd, where I assisted in the design and analysis of heat exchangers and boilers. I am proficient in MATLAB, COMSOL, SOLIDWORKS, and Python, and have earned multiple certifications in engineering drawings and Fusion 360. I am passionate about solving complex engineering problems and applying my knowledge to real-world challenges. I aspire to become a successful engineer and researcher in the field of mechanical engineering and contribute to the advancement of science and technology.

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, ro... Read more

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, robotics, consumer electronics, process valve controller, and elevator device industries. With over 8 years of experience in the iterative product development process, I've gained the experience and skill set necessary - in 3D CAD, model creation, design for manufacturability and assembly, manufacturing expertise, prototyping, test development, project management, and supply chain management - to bring your ideas to life seamlessly and efficiently. No matter what - the scope/size of the project, product, or material - I can help you get it manufactured and into your hands quickly. There are no restrictions or requirements to my service, if you'd like for me to just create the design files then that's not a problem either. Please feel free to contact me with any inquiries. I'm looking forward to working with you. **Resume and design portfolio available upon request**

Agile innovation development that moves ideas from concept to creation. I work with clients who had the "aha" moment and need help to move their idea into a production ready solution. I specialize i... Read more

Agile innovation development that moves ideas from concept to creation. I work with clients who had the "aha" moment and need help to move their idea into a production ready solution. I specialize in 3D CAD development of plastic, steel, and cast parts and can provide augmented reality reviews of the final design.

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, o... Read more

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, organized, intelligent, motivated, and communicative.

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of... Read more

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of engineering expertise to deliver premium consulting services, encompassing everything from design to creation of concept-to-manufacture schematic drawings, FEA analysis, and comprehensive Design for Manufacturability (DFM) insights. My proficiency extends to various SolidWorks certifications. With a proven ability to excel across a wide spectrum of industries, I invite potential clients to peruse my portfolio. I look forward to connecting with you and/or your company to understand your specific goals and collaborate on tailored solutions that will drive your success to new heights.

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundre... Read more

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundreds of sub assemblies and ranging in price for a few dollars to $1M. Additionally, I am well versed in producing photo realistic renderings of products for marketing purposes. I pride myself in providing thorough and accurate deliverables by taking the time to fully understand the challenges my clients face and how to provide the best solution possible.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

• Requirements Definition and Development collaborating with customers to identify necessary features and functions, translating these into detailed product requirements • Concept development and indu... Read more

• Requirements Definition and Development collaborating with customers to identify necessary features and functions, translating these into detailed product requirements • Concept development and industrial design • Product and process design and development • Engineering design and analysis (FEA, CFD, DFMA, Robust Design, 1st Principles, etc.) • Injection molding part and tooling design • Sheet metal design and manufacturing • Prototyping (3D printing, scanning, CNC machining, and fabrication) • CNC machining and fabrication (sheet metal and structures) • Fixture, jig, measurement systems, and assembly equipment design and development

Experienced Software Engineer with mixture of script writing, software integration and 2D and 3D CAD integration using C++, C#, Visual Basic and Python. Have worked with CATIA V4, V5, V6, 3DX; NX, CRE... Read more

Experienced Software Engineer with mixture of script writing, software integration and 2D and 3D CAD integration using C++, C#, Visual Basic and Python. Have worked with CATIA V4, V5, V6, 3DX; NX, CREO, AutoCAD, Solidworks APIs to streamline design and analysis process.

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA s... Read more

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA software programs • Thorough understanding of design and analysis procedures, and proper material selection to ensure safety and optimal functionality of final product • Demonstrated proficiency in using SolidWorks, CATIA and Ansys through various school projects and past internship experiences • My capstone project required me to design a compact device, from a bulkier version, which harnessed nano aqueous ozone generator device components. The device intends to replace commercial detergents in the market with nano aqueous ozonated water to kill microbes • My internship at Albabtain Power and Telecommunication Co. saw me design components such as base flange, poles, and other accessories and assembled these components together, created drawing sheets ready to be used by fabricators, and worked on optimizing the components for optimal performance and cost reduction • At ITW, I used Ansys to compare the performance of a regular steel dowels used in concrete to a waveform shaped joint and conducted a full factorial DoE on the said waveform joint to determine the design with optimal results. Also, I suggested configurations and solutions to a production machine's rotary disc that failed due improper constraint based on intensive FEA analysis and design optimization

All New, All Different. Born in New York, Raised in Lagos, and Lives in Texas –Peter has developed a sense of design across cultures and time. With a knack for design and the call for restless creati... Read more

All New, All Different. Born in New York, Raised in Lagos, and Lives in Texas –Peter has developed a sense of design across cultures and time. With a knack for design and the call for restless creativity, he strives to redefine aesthetics, breathing life into every solution with a unique blend of imagination and precision. Whether freelancing his way through the industry or interning at a mission-driven company, he is willing to deliver a new, unique and satisfying collaborative experience for his future partners—with an eclectic skillset of mechanical product design and analysis, ergonomic design, A-level surface modelling, prototyping, graphic design, and presentation. You may see a watch, but he sees a wearable clock device. You see a normal car, he sees a four-wheeled diesel-powered bicycle. You see a phone, he sees a sophisticated computer shrunk to a handheld pocket device. You see a stethoscope, he sees a slick rubber-tubed heart reader. You see a simple product, he sees the next stepping stone to innovation. Peter is a junior Mech.Engr student at Prairie View A&M University with an interest in product design + consumer electronics + ergonomics. He is ecstatic to meet all of you— In a multi-faceted design studio driven by the whim of product development and visualization. For a non-profit cause on a mission for social impact and the betterment of environmental welfare. In a start-up manufacturing company ready for the world of design, technology and business. In his inbox for a intriguing conversation on the latest trends in product design and engineering. Let’s Connect!

I have been using AutoCAD for over 11 years now. I have experience with several AutoDesk products including ReVit and Inventor. In addition to Autodesk I have experience in Solidworks, Rhino, Sketchup... Read more

I have been using AutoCAD for over 11 years now. I have experience with several AutoDesk products including ReVit and Inventor. In addition to Autodesk I have experience in Solidworks, Rhino, Sketchup, and Adobe illustrator. I use 3D printers and laser cutters for prototyping and project development.

solidworks (cswp, cswpdt, cswpsm) EIT texas board(engineer in training) highly skilled in designing new products. have 5 year of experience in designing new product.

solidworks (cswp, cswpdt, cswpsm) EIT texas board(engineer in training) highly skilled in designing new products. have 5 year of experience in designing new product.

Mechanical Design Engineer having experience of 2 years experience after completion of Bachelors degree in Mechanical Engineering. Solid professional knowledge base built upon formal education and on-... Read more

Mechanical Design Engineer having experience of 2 years experience after completion of Bachelors degree in Mechanical Engineering. Solid professional knowledge base built upon formal education and on-the-job training from senior engineers. Proficient in mechanical design and analysis, materials handling, and water and steam systems. Top skills in 3d CAD software's like Solidworks, Abacus and Autocad

Tony Davis is a senior engineer with Navitas Solutions in Ann Arbor, Michigan. I began working in the automotive design, commercial design and aerospace defense industry in the early 2012. I receiv... Read more

Tony Davis is a senior engineer with Navitas Solutions in Ann Arbor, Michigan. I began working in the automotive design, commercial design and aerospace defense industry in the early 2012. I received his bachelor's degree in Mechanical Engineering from the Wayne State University at Detroit, Michigan in 2013. During the past 4 years my work has focused upon developing cost-effective methods for reducing carbon emission pollution by design of mobile battery solutions for commercial, industrial, and government defense industries. In that capacity, my primary clients have been state and national governments, mainly in North America. My work over the past 5 years can be summarized as covering the following subjects: · the design and evaluation of inspection and maintenance programs; · the development and application of mobile battery systems, autonomous vehicle intergration for communication sensors for vehicle system ; · investigations into the effectiveness of techniques and technologies for validating to prototypes and production intent designs, · the development of strategies for reducing product line brands of systems and assemblies and inventory for BOM's.

I am a very motivated, hardworking individual with a passion in bringing people ideas to life. With knowledge in mechanical engineering and proficiency in mechanical design and analysis. I have the fu... Read more

I am a very motivated, hardworking individual with a passion in bringing people ideas to life. With knowledge in mechanical engineering and proficiency in mechanical design and analysis. I have the full capabilities to do so and much more. Taking napkin sketches ideas and turning them to final products. As an engineering student in a rapidly growing global economy, I am eloquent in prototyping services through freelance means. Generally, most students are strictly focused on academics, which is an excellent prospect. However, I am a true believer of the idea that is no better way to learn than to do. Please do not hesitate to reach out to me if you feel that my skills can apply to your business or personal needs.

Started designing equipment in 1987, went up through Autocad in the early '90s, then SolidWorks in 1997 and never looked back. Decades of experience with design from concept through analysis and o... Read more

Started designing equipment in 1987, went up through Autocad in the early '90s, then SolidWorks in 1997 and never looked back. Decades of experience with design from concept through analysis and on into manufacturing drawings.

Senior Engineer experienced with Steel and Aluminum Fabrication. Sheet metal work. CNC programming, brake press bending programmer. Tube bending prints as nd programming.

Senior Engineer experienced with Steel and Aluminum Fabrication. Sheet metal work. CNC programming, brake press bending programmer. Tube bending prints as nd programming.

I am Jeremy, a mechanical engineer and Certified Solidworks Professional (CSWP) looking for freelance CAD opportunities. I have 8+ years experience with 3D modeling and rapid prototyping mechanical pa... Read more

I am Jeremy, a mechanical engineer and Certified Solidworks Professional (CSWP) looking for freelance CAD opportunities. I have 8+ years experience with 3D modeling and rapid prototyping mechanical parts for applications including, but not limited to: robotics, aviation, electronics enclosures, product design, and art. I have a masters in mechanical engineering and can help with design and analysis of parts. I also have a professional-grade Ultimaker 3D printer to assist with the design process. Please reach out if you are in need of CAD work.

Team available for any kind of engineering job

Team available for any kind of engineering job

Proficient and creative mechanical designer with solid experience, 25+ years, in new product design from conception to production. ▪ Senior Mechanical Designer in new product design for mass manufactu... Read more

Proficient and creative mechanical designer with solid experience, 25+ years, in new product design from conception to production. ▪ Senior Mechanical Designer in new product design for mass manufacturing in global environment adhering to industry standards: UL, IEC, ANSI, ISO, NEMA, NEC, NFPA. ▪ Expert in 3D model and 2D drawing creation and maintenance using ISO and ASME drafting and GD&T standards. ▪ Proficient in using PTC Windchill Product Lifecycle Management software. ▪ Extensive experience in PTC 3D Parametric Creo utilizing modules in sheet metal, Mechanism, and Simulate (FEA). ▪ Strong knowledge and experience with SolidWorks creating large assemblies, sheet metal parts, machined parts, injection molded and cast parts. ▪ Strong experience with mechanism design and analysis, complex and large assembly creation and maintenance, statistical tolerance analysis for design optimization and cost savings. ▪ Expert design skills creating and modifying parts using various manufacturing technologies such as thermoplastic and thermoset molding, metal casting, sheet metal, machining, forging, and 3D printing. Technical Proficiencies ✔ Solid & Parametric Modeling using SolidWorks, Inventor, PTC Parametric Creo, CADDS5, Alibre Design ✔ Simulation and Analytical modeling using TolAnalyst, Tolerance Manager, Creo Mechanism, Creo Simulate, Excel ✔ Presentations using Word, PowerPoint, KeyShot (Photo Rendering and animation) Patents ✔ Compact three-hole lug, Issued Jun 24, 2014 US8759695 ✔ Snap-in shutter system for rack out circuit breakers, Issued Jul 18, 2017 US9711954B2

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential... Read more

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential and commercial buildings not limited to retail stores, industrial buildings, and schools. I can do structural calculations/analysis and prepare construction documents (including plans and detailing). I am licensed in the District of Columbia(PE-Structural), Maryland(PE), and Illinois(SE). I am based out of the Washington DC area and am available for local site visits within driving distance. I have access to a variety of software including but not limited to AutoCAD, REVIT and structural analysis software. I look forward to providing solutions to your engineering needs. Please contact me if you have any questions or require any further information.

Adept has been providing Engineering Services since 1982. Machine and Product design experience in most Industry sectors. Engineered designs backed by solid Engineering Design and Analysis. Unique and... Read more

Adept has been providing Engineering Services since 1982. Machine and Product design experience in most Industry sectors. Engineered designs backed by solid Engineering Design and Analysis. Unique and innovative solution provider.

I am a Professional Engineer specializing in Machine Design and Materials. I have over 10 years of experience in the heavy steel fabrication and marine industry. My expertise is in weldment and machin... Read more

I am a Professional Engineer specializing in Machine Design and Materials. I have over 10 years of experience in the heavy steel fabrication and marine industry. My expertise is in weldment and machine design for commercial and military applications.