Hire CFD Analysis Designers in United States

I am a mechanical/manufacturing engineer with over 15 years experience in design engineering. For the last 5 years I have served as lead mechanical design engineer various companies in the energy stor... Read more

I am a mechanical/manufacturing engineer with over 15 years experience in design engineering. For the last 5 years I have served as lead mechanical design engineer various companies in the energy storage industry. For the 10 years prior to that, I worked as gauge and fixture designer for a leading firearms company, where I was tasked with plant-wide fixture and gauge design for a multitude of products. I specialize in design for manufacturability, and can tailor my designs to match your fabricating capabilities. Honesty and reliability are a few of my core principles, and you can be sure that if I tell you I'm going to do something, that thing will be done to the best of my ability.

Expert 3D scanning software and Reverse Engineering service center, with expert knowledge with several different CAD platforms that are used to successfully launch consumer products for the masses

Expert 3D scanning software and Reverse Engineering service center, with expert knowledge with several different CAD platforms that are used to successfully launch consumer products for the masses

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plum... Read more

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plumbing systems that pass plan review the first time. Expertise: Mechanical Engineering Design HVAC load calculations (Elite Software) – Ducted & ductless systems – VRF, split, rooftop, air-source heat pumps Plumbing Design for residential and commercial Buildings Electrical Design for residential and commercial Buildings Energy modeling – Title 24 energy estimation report COMcheck, REScheck, MEP coordination – clash-free Revit models, Fire protection – sprinkler hydraulic calcs, standpipe layouts (NFPA 13/14) Low-voltage – fire alarm, security, AV, nurse-call (NICET-ready) What I Deliver Fully stamped MEP sets (PDF + editable CAD/Revit) Code-compliant designs (IBC, IMC, IPC, NEC, IECC, state amendments) Fast 5–7 day turnarounds on most residential & light-commercial projects Two revision round included; additional at fixed rates Typical Projects Single-family & multi-family residential Retail shells, restaurants, offices < 20,000 sf MEP Tenant improvements & Renovations Data centers, warehouses, medical offices Software & Standards Revit 2025 | SolidWorks 2025 | RHVAC and CHVAC from Elite Software Why Clients Hire Me Since my plans are approved by the city on the first submission, I cover all the city amendments at no additional fee. One-stop stamping – no juggling multiple state PEs Very cost-effective pricing – flat fees or Hourly Zero surprises – I flag code conflicts before submittal Let’s get your plans approved. Upload your architectural set or sketch; I’ll return a firm quote within 24 hours.

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

Rogelio Castilla Mechanical Design Specialist | Founder of Innovavision Solutions I’m a mechanical design engineer with a proven track record in medical devices, fluid systems, and industrial hardwar... Read more

Rogelio Castilla Mechanical Design Specialist | Founder of Innovavision Solutions I’m a mechanical design engineer with a proven track record in medical devices, fluid systems, and industrial hardware—combining hands-on prototyping expertise with rigorous analytical skills to deliver functional, manufacturable, and compliant designs. My work spans: Core Design Competencies ✔ Medical Devices: Implantable bioelectronics, microfluidic systems (e.g., sweat sensors, lab-on-a-chip), and surgical tools. ✔ Fluid & Mechanical Systems: Pumps, valves, pistons, and actuators—optimized for performance, durability, and cost-efficiency. ✔ End-to-End Development: From concept to MVP, leveraging 3D printing (SLA/FDM), CFD/FEA (COMSOL), and DFM principles to slash prototyping costs by 70%+. Why Work With Me? ✅ Industry-Blending Expertise: Unique background in biomedical + mechanical engineering—ideal for cutting-edge medical or cross-disciplinary projects. ✅ Regulatory-Savvy Designs: Intimate knowledge of FDA 21 CFR 820 & ISO 13485 ensures compliance is baked into your product from Day 1. ✅ Simulation-Driven Approach: Use of computational software such as OpenFOAM, Python, and SolidWorks Simulation to predict and resolve failures before prototyping. ✅ Startup to Enterprise Scale: Founded Innovavision Solutions to deliver agile, client-focused solutions—no bureaucratic delays. Let’s Build Something Exceptional! I partner with clients who value precision, innovation, and speed. Whether you’re developing a minimal viable product, refining industrial hardware, or solving complex modeling challenges—I’ll deliver designs and that work, not just CAD files. Tools I Use Daily: SolidWorks, Autodesk (Fusion 360, Inventor), OpenFOAM, Python, SLA/FDM 3D Printing. Contact me: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ (281) 690-2954 innovavisionsolutions .com https://www.linkedin.com/in/ rogeliocastillame/

Experienced metal casting part and process design, methods, techniques, tooling and fixturing design. Design for 3D printed parts and 3D printed molds, design for manufacture, machined component desig... Read more

Experienced metal casting part and process design, methods, techniques, tooling and fixturing design. Design for 3D printed parts and 3D printed molds, design for manufacture, machined component design, CFD analysis for casting processes. 30+ years' experience in automotive, aerospace and industrial component design and manufacturing.

1. Successfully designed and installed Automotive assembly lines 2. Automotive Assembly Stations 3. Test Equipments for Automotive industries and Research institutions 4. Gauges, Fixtures Design and M... Read more

1. Successfully designed and installed Automotive assembly lines 2. Automotive Assembly Stations 3. Test Equipments for Automotive industries and Research institutions 4. Gauges, Fixtures Design and Manufacturing 5. CADD Support (Renewable energy, Automotive, AirCondition Industries) 6. Special Purpose machines Design Engineering Consulting and Solutions Design Support 3D Modeling and 2D Detailing Finite Element Analysis (FEA) CFD Analysis Forces and Stress Analysis Motion Simulations API for CADD software CADD Data Migration

AnalysisPros is an independent Finite Element Analysis Services (FEA) firm, established in 1994, dedicated to support the design and engineering community with FEA applied knowledge and access to the... Read more

AnalysisPros is an independent Finite Element Analysis Services (FEA) firm, established in 1994, dedicated to support the design and engineering community with FEA applied knowledge and access to the latest analysis solutions and technology. The company provides structural (linear and nonlinear, static and dynamic), thermal, fluid and MoldFlow analysis capabilities utilizing FEA tools. The company mission is to provide its clients with the best analysis solutions available and the highest level of support and quality possible. The company provides analysis services to almost any imaginable application. Application of the FEA methods range from traditional Aerospace, Automotive and Medical to the Entertainment and Toy industries. AnalysisPros clients include design and engineering firms that have a need for an occasional and reliable analysis services on their designs. This service is an alternative option to companies which do not have large enough volume of analysis that justifies the purchase, maintenance and dedicated personnel for doing the analysis work. It directly translates to saving in time and money by utilizing a company that has the latest FEA technology and experience readily available. By using the service, it is possible to generate a simulation of any designed structure, loaded with almost any imaginable way. Through the use of FEA tools and many years of analysis experience, the virtual testing of any design is made possible in record time. AnalysisPros supports its clients at any stage of the engineering process. The analysis service helps in evaluating feasibility of new design as well as trouble shooting failed design already in the market and finding solutions without the need to prototype and waste time and money. For companies that comply with the ISO 9000 design process and FEMA recommendations, numerical analysis and virtual testing, verification and validation is a must. FEA methods provide the capability for companies to establish a design review at any stage in the project. The benefits of starting analysis early in the design cycle translates later to savings in cost. By validation and verification of the design, before even prototyping, true optimization can be achieved through a predictive testing.

Mechanical Engineer with 18 years experience innovating electromechanical solutions in start-up and fortune 500 companies in the oil & gas, mining, modular construction, renewables & consumer product... Read more

Mechanical Engineer with 18 years experience innovating electromechanical solutions in start-up and fortune 500 companies in the oil & gas, mining, modular construction, renewables & consumer product markets. Conceptualized and managed full life cycle programs ranging from $2 million to $10 million in budget. Core competencies include Engineering Design, Analysis, Project Management, Team Management, Prototyping, Testing, and Intellectual Property Creation.

I’m a mechanical engineer with 19+ years of experience in product development, CAD modeling, prototyping, and complex system design. My career spans from nuclear power plant systems engineering to con... Read more

I’m a mechanical engineer with 19+ years of experience in product development, CAD modeling, prototyping, and complex system design. My career spans from nuclear power plant systems engineering to consumer product innovation, with 4 patents and extensive hands-on experience bringing ideas to life. I specialize in helping inventors, startups, and small companies turn concepts into manufacturable products. With a full workshop and 3D printing capability, I not only design in CAD but can also deliver functional prototypes for real-world testing.

Scott Sardina is a licensed professional engineer for the State of Wisconsin, certified fluid power specialist, and founder of Waterclock Engineering. He previously held multiple engineering, manageme... Read more

Scott Sardina is a licensed professional engineer for the State of Wisconsin, certified fluid power specialist, and founder of Waterclock Engineering. He previously held multiple engineering, management, and sales roles, specializing in the fluid power industry. Scott has a Bachelor of Science degree in Engineering Mechanics and Astronautics and Mathematics from the University of Wisconsin. He also has a Master of Science degree in Engineering Mechanics from the University of Wisconsin. Scott has worked on various demanding applications for forging, extrusion, aerospace, civil, and oil & gas applications. He has worked on all aspects of the project phase from engineering design to project management. Scott is a Director-At-Large on the International Fluid Power Society Board of Directors and serves as Vice Chair of the Marketing Committee.

Mechatronic engineering with extensive field experience, specialized in engineering production design and optimization.

Mechatronic engineering with extensive field experience, specialized in engineering production design and optimization.

Engineer / Pilot / Entrepreneur My name is Ben Myburgh and I own Pretoria Engineering. I specialize in helping people develop their napkins sketch ideas and bringing them into reality. Using the la... Read more

Engineer / Pilot / Entrepreneur My name is Ben Myburgh and I own Pretoria Engineering. I specialize in helping people develop their napkins sketch ideas and bringing them into reality. Using the latest in 2d and 3d CAD modeling as well as 3d printing, we take the ideas from paper to physical parts. I have many years of experience in a wide variety of industries and bring numerous skills to the table. With projects ranging from Brain Teasers and puzzles to the Aerospace industry we can do it all. Current Projects: - Red Bull Air Race Team Support - Design/Simulation Engineer - LIDAR projects for general aviation Engineering Background: - Flight Test Engineer - Composites Engineering - Automotive Engineering - Patent Development - 3D Printing / Cura - CFD / FEA Analysis - OpenVSP Aero CFD - Laminar Research: PlaneMaker / X-Plane CAD Background: - AutoCAD - SolidWorks - Catia - Onshape - Inventor - Fusion 360 Past Projects: - Business owner - Murfreesboro Aviation Flight School (3 years) - Stand Up Desk - Ergo desk for the workplace - Eddie's Molecule - Kickstarter Brain Teaser Puzzle - G-Meter - Arduino based LED G-Meter light-bar for experimental aircraft Skills: - Milling / Machining - Forklift / Heavy Construction Vehicle - Commercial Pilot / Single Engine / Multi-Engine / Sea Plane / High Performance / High Altitude / Tail wheel

He has extensive experience across a range of hydraulics, water distribution networks, computational fluids dynamics (CFD), water quality, transients (surge), and water/wastewater treatment plants hyd... Read more

He has extensive experience across a range of hydraulics, water distribution networks, computational fluids dynamics (CFD), water quality, transients (surge), and water/wastewater treatment plants hydraulics. Also, he has experience in many engineering software such as WANDA, HAMMER, Flow 3D, Autodesk CFD simulation, Infoworks ICM, Micro-drainage, WaterGEMS, SewerGEMS, Strom CAD, Civil 3D, Infraworks, Flow-master, Culvert Master, EPANET…etc

I have extensive experience with Mechanical Design using CAD software. I have worked as a Mechanical Design intern and Teaching assistant for CAD software. I can assist in the design process and produ... Read more

I have extensive experience with Mechanical Design using CAD software. I have worked as a Mechanical Design intern and Teaching assistant for CAD software. I can assist in the design process and product design. I can Prepare 3D models, Complex assemblies, 2D drawing, and rendering animation. Expert in Solidworks modeling and assembly. I can also perform Thermal and structural simulations.

My passion is product design; I love taking on challenging design problems and developing robust, cost effective solutions. I have 7 years of experience in mechanical design; in that time, I’ve worked... Read more

My passion is product design; I love taking on challenging design problems and developing robust, cost effective solutions. I have 7 years of experience in mechanical design; in that time, I’ve worked on projects ranging from candle molds and custom guitar picks to exhaust manifolds and lube pumps. I’m proficient in 3D CAD design, and I currently use Fusion 360 for freelance work. Specialties: • Design for fluid flow: Optimized geometry for pulsed (like an exhaust manifold) and steady state (like coolant passages) flow conditions. Do not currently possess CFD analysis capability for freelance work, but have years of experience optimizing flow passages for high performance applications, and can apply that experience to any fluid design project. • Design for 3D printing: There is a common misconception that 3D printers can create any shape that can be imagined. While 3D printing can create shapes that are impossible with traditional manufacturing techniques, it has its own, unique limitations. Without a solid understanding of these limitations and how to account for them, 3D printing projects can become very frustrating very fast. • Design of mechanisms: Designing a system of parts that work together requires a considerable body of knowledge on top of simple part design. Assemblies must be robust against manufacturing variation, assembly variation, and have appropriate surface finishes in order to ensure that the parts will always go together and function as intended. • 2D drawings and GT&T: In most cases, the 2D drawing is still the legal document that defines the part; developing a drawing with a robust datum structure and proper tolerances is a critical part of turning an idea into a producible reality. Other proficiencies: • Design for sand casting: material selection, optimizing parting lines, core design. • Seal design: radial and face seal o-ring interfaces, as well as gasket sealing flanges. • Bolted joint design: proper bolt size and grade selection, grip length, thread engagement.

I am Mechanical Designer with more than 30 years experience in design and engineering of sophisticated components (ie: Gas Turbine Hardware, Fuel Cells, and Robotic Equipment). Ability to reverse engi... Read more

I am Mechanical Designer with more than 30 years experience in design and engineering of sophisticated components (ie: Gas Turbine Hardware, Fuel Cells, and Robotic Equipment). Ability to reverse engineer scan data to solid models utilizing Solidworks and provide customer design intent translated models (.stp, .iges, parasolid...etc). I have prepared various internal cavity models for FEA or CFD analysis. Will create/advise 3D printed models for advanced prototypes. Skilled in handling all aspects of the process from analyzing customer needs to layout design, working closely with engineering management, manufacturing departments, and vendors to determine appropriate specifications for individual components and assemblies. Effective troubleshooter with emphasis on cost, reliability and quality control.

I’m an experienced mechanical design and process engineer that has worked with a variety of clients in the pharmaceutical, food, and chemical processing industries. I also have extensive experience re... Read more

I’m an experienced mechanical design and process engineer that has worked with a variety of clients in the pharmaceutical, food, and chemical processing industries. I also have extensive experience regarding automation, machine and process equipment design for various OEMs and end users. My other interests include computational fluid dynamics analysis, finite element methods/analysis, and chemical process simulation utilizing industry standard software platforms. I have degrees in Mechanical Design Technology, Industrial Business Management, and a Master of Science in Manufacturing Engineering with a concentration in Mechanical Design.

Eugene is a Mechanical Engineer and the Program Manager at NPD Partner. He specializes in new product development, plastic part design, and project management. He has over 22 years of engineering ex... Read more

Eugene is a Mechanical Engineer and the Program Manager at NPD Partner. He specializes in new product development, plastic part design, and project management. He has over 22 years of engineering experience that includes development of solar panel mounting system, irrigation products, and electronics housings. In project management, Eugene has extensive experience driving NPD and COGS reduction projects. He has proven track record as an innovative thinker and is the inventor behind multiple patents in the irrigation products industry. Other Experiences: FEA, CFD, DFMA, GD&T, FMEA, EDM, SPC, CNC machining, mold design, plastic injection molding, metal injection molding, rubber injection molding, compression molding, sheet metal, die casting, sand casting, and extruding.

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also... Read more

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also adapt and apply the many methods and techniques I’ve acquired through study, and interest, in a broad spectrum of scientific disciplines; and can organize, analyze, interpret, and evaluate scientific data in the solution of engineering problems

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a... Read more

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a structural project that will be going on the International Space Station in 2019 and a Solar Panel Project for a small village in Panama. Outside of Engineering I really enjoy making music and helping set up for concerts.

Hi! My name is Rolando! 🚀 I'm a professional Industrial Designer, Architectural Designer, and self-taught UI/UX Designer with over a decade of experience in the design industry. Being a multi-discip... Read more

Hi! My name is Rolando! 🚀 I'm a professional Industrial Designer, Architectural Designer, and self-taught UI/UX Designer with over a decade of experience in the design industry. Being a multi-disciplinary designer, my clients feel that I bring a great deal of perspective to projects. I'm currently working on something in the luxury cookware space; ask me about it! I can help you with things like: - Design, engineer, prototype, and manufacture your physical product. Working mainly in Fusion 360, I also have experience in Inventor and Solidworks. I can 3D model in solid, surface, or mesh modeling, create a sheet metal layout, molds for injection molding, use generative design (A.I. influenced design) for product iterations, generate product tool paths for 5-Axis CNC machines, perform advanced simulations, build animations, fabricate photo-realistic renderings, and produce technical drawings with bill of materials. I can also use my network of manufactures to ensure we build your working prototype. - Design and 3D model your residential or commercial project. I have been working in the high-end residential space in both Florida and Massachusetts for over six years. Mainly working on projects ranging from 4,500SqFt to well over 17,000SqFt, I can ensure you your house is built exactly as you envision it. For developers, I work on spec homes and can also create floor plan layouts with added options, and unit floor plans for your multi-family projects, including 3D model floor plans for website marketing purposes. - Fully design and prototype mobile apps from front to back using Figma. I mainly design apps for iOS products, but am able to create frames for Android, Google Pixel, and Websites. I can layout a solid product roadmap, sketch low-fidelity wireframes, build user flows, and produce a competitive analysis for your product. I can even generate high-fidelity renderings for marketing purposes. Show people what your app does and how it looks! - Consulting clients is also another option I have available. Sometimes people already know what they want to build and just need help building it. If you have technical drawings, or if you have napkin sketches, I can provide additional support to your team, or help you get your product organized the way you have it figured out. I am extremely passionate about design and really like coming up with new ideas. I've had the opportunity to work with some great founders and always enjoy hearing about startups. Let me know if there is any way I can help you with your product. Looking forward to working with you! 🌱

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off... Read more

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off racecars and custom engineered cars. I've designed parts to be made using every manufacturing method, sheetmetal, 2d and 3d subractive, additive (SLA,FDM,SLS, etc.) and will make the necessary DFM decisions based on your needs. Every part i make will be 100% analysed for it's design specifications (FEA, CFD, etc) , with function and form developed for it's use case.

I am a designer with a wide variety of experience. I have Bachelor of Science in Architecture (minor in humanities) from University of Texas, and a Master of Architecture from Sci-Arc. 20 years in pat... Read more

I am a designer with a wide variety of experience. I have Bachelor of Science in Architecture (minor in humanities) from University of Texas, and a Master of Architecture from Sci-Arc. 20 years in patent illustration with over 350 patents. Worked all around the United States with lots of work in New York, Los Angeles, and various areas in Europe. Jewelry, Film, Architecture, Industrial, and many more.

I have been working in modeling and simulation field for 4+ year. I accomplished a number of projects regarding 2D, 3D CAD modeling along with finite element analysis and Computational fluid dynamics... Read more

I have been working in modeling and simulation field for 4+ year. I accomplished a number of projects regarding 2D, 3D CAD modeling along with finite element analysis and Computational fluid dynamics analysis. I use SOLIDWORKS for 3D modeling. sometimes i alos use PTC depending on the requirements. For CFD and FEA, i use ANSYS, COMSOL and ABAQUS depending on the problem specification.