Hire Assembly Design Designers in United States

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I ha... Read more

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I have been in Mechanical Design using Solid Works & Solid Edge. I can produce 2D prints using DraftSight (AutoCad clone). I can also produce 3D models using the aforementioned programs. I can also produce photo-realistic renderings out of CAD models. I recently started my own Freelancing business called Scott Lester Drafting & Design. On the side, I teach Engineering Design at the same community college I graduated from.

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, com... Read more

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, complex surface modeling, top down assembly design, and more. I have 20 plus years of Solidworks and ProEngineer experience. I work very well remote with use of tools like zoom meetings, email, phone, etc. I do not mind travel when needed and can provide many references you can speak with about my work history.

Designer by passion, Engineer by profession, Author by hobby!! Talk to me today and I promise you that will be fun!!

Designer by passion, Engineer by profession, Author by hobby!! Talk to me today and I promise you that will be fun!!

I attend Kettering University, a predominately engineering university once named General Motors Institute. From there I got a top class education paired with 3 years ofwork experience in my field. Whi... Read more

I attend Kettering University, a predominately engineering university once named General Motors Institute. From there I got a top class education paired with 3 years ofwork experience in my field. While a lot of my work was hands on, I acted as my companies only CADD professional throughout my entire work experience. I am more than able to create any design you can imagine.

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I’m a mechanical designer with 20+ years of CAD and product development experience, specializing in SolidWorks part and assembly design, reverse engineering, and 3D printing. My background spans manuf... Read more

I’m a mechanical designer with 20+ years of CAD and product development experience, specializing in SolidWorks part and assembly design, reverse engineering, and 3D printing. My background spans manufacturing, engineering, and IT, giving me a unique perspective on both design precision and practical execution. Highlights: Mechanical Design: Created 3D models, assemblies, and technical drawings for prototypes, production parts, and custom equipment. Reverse Engineering: Converted legacy parts and sketches into precise CAD models, often optimized for CNC machining, sheet metal, or 3D printing. Product Development: Delivered functional prototypes, BOMs, and DFM/DFA improvements to reduce cost and lead time. Manufacturing Support: Worked directly with vendors and production teams to ensure manufacturable, cost-effective solutions. Engineering Leadership: Managed cross-functional projects, balancing design, quality, and delivery in industries ranging from lab automation to firearms manufacturing. Specialties: SolidWorks 3D Modeling & Assemblies Reverse Engineering & Part Conversion 3D Printing & Prototyping Manufacturing Design (Sheet Metal, Machining, Plastics) Technical Drawings & GD&T BOMs, PDM, and Revision Control

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work in... Read more

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work instruction drawings to represent multipart products and can include single part pieces with DXF files for CNC programming.

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and... Read more

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and intellectual stimulation of the the work that I enjoyed for my entire career. So, I formed an LLC and purchased licenses for CATIA and Solidworks and have been performing contract tool design projects for former employers and new customers alike for several years. The types of tools I have designed include: o Composite airframe components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs) o Jigs and fixtures: major and sub-assembly tools, drill jigs, installation fixtures o Tooling for Composite air-frame components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs, etc.) o Weld fixtures, electron beam welding tools o Ground support equipment o Machining holding fixtures o Conceptual tool designs for manufacturing planning o Inspection tools o Test fixtures

Currenlty in Mechanical Engineering school. I have a great CAD background I obtained while getting my CNC/CAM degree and doing personal projects using software. I have my CSWA and I have been workin... Read more

Currenlty in Mechanical Engineering school. I have a great CAD background I obtained while getting my CNC/CAM degree and doing personal projects using software. I have my CSWA and I have been working with Inventor and AutoCAD for over a year now.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

I am a fourth-year Mechanical Engineering student at the University of Wisconsin–Madison offering freelance CAD and mechanical design services. Through multiple industry internships and co-op experien... Read more

I am a fourth-year Mechanical Engineering student at the University of Wisconsin–Madison offering freelance CAD and mechanical design services. Through multiple industry internships and co-op experiences, I have developed strong proficiency in 3D solid modeling, assembly design, and technical drawing creation using SOLIDWORKS and Autodesk Fusion 360. My background includes concept development, detailed part and assembly design, and drawing release for automotive, automation, and manufacturing applications. In addition to my professional experience, I am an active member of Wisconsin Racing, UW-Madison’s Formula SAE program, where I work hands-on to design, manufacture, and validate a competitive electric vehicle. This combination of industry exposure and applied engineering experience allows me to deliver practical, manufacturable CAD solutions tailored to real-world requirements.

Hi! My name is Rolando! 🚀 I'm a professional Industrial Designer, Architectural Designer, and self-taught UI/UX Designer with over a decade of experience in the design industry. Being a multi-discip... Read more

Hi! My name is Rolando! 🚀 I'm a professional Industrial Designer, Architectural Designer, and self-taught UI/UX Designer with over a decade of experience in the design industry. Being a multi-disciplinary designer, my clients feel that I bring a great deal of perspective to projects. I'm currently working on something in the luxury cookware space; ask me about it! I can help you with things like: - Design, engineer, prototype, and manufacture your physical product. Working mainly in Fusion 360, I also have experience in Inventor and Solidworks. I can 3D model in solid, surface, or mesh modeling, create a sheet metal layout, molds for injection molding, use generative design (A.I. influenced design) for product iterations, generate product tool paths for 5-Axis CNC machines, perform advanced simulations, build animations, fabricate photo-realistic renderings, and produce technical drawings with bill of materials. I can also use my network of manufactures to ensure we build your working prototype. - Design and 3D model your residential or commercial project. I have been working in the high-end residential space in both Florida and Massachusetts for over six years. Mainly working on projects ranging from 4,500SqFt to well over 17,000SqFt, I can ensure you your house is built exactly as you envision it. For developers, I work on spec homes and can also create floor plan layouts with added options, and unit floor plans for your multi-family projects, including 3D model floor plans for website marketing purposes. - Fully design and prototype mobile apps from front to back using Figma. I mainly design apps for iOS products, but am able to create frames for Android, Google Pixel, and Websites. I can layout a solid product roadmap, sketch low-fidelity wireframes, build user flows, and produce a competitive analysis for your product. I can even generate high-fidelity renderings for marketing purposes. Show people what your app does and how it looks! - Consulting clients is also another option I have available. Sometimes people already know what they want to build and just need help building it. If you have technical drawings, or if you have napkin sketches, I can provide additional support to your team, or help you get your product organized the way you have it figured out. I am extremely passionate about design and really like coming up with new ideas. I've had the opportunity to work with some great founders and always enjoy hearing about startups. Let me know if there is any way I can help you with your product. Looking forward to working with you! 🌱

I am curious and detail oriented mechanical engineer with a strong background in mechanical design. I have worked for over 10 years in various mechanical design and engineering roles where I have hone... Read more

I am curious and detail oriented mechanical engineer with a strong background in mechanical design. I have worked for over 10 years in various mechanical design and engineering roles where I have honed my skills in part and assembly design (in CAD) with a focus in Design for Manufacturability. Some of the projects I have be involved in include: a robotic arm workcell for package sorting, industrial 3D printing materials, custom hydraulics for amphibious crafts, the world's smallest heart pump, and autonomous underwater vehicles. I look forward in assisting you with your design needs!

I'm a certified Onshape Associate and experienced CAD designer with a strong background in 3D modeling, technical drawing, and design visualization. My work has been recognized at the Michigan Industr... Read more

I'm a certified Onshape Associate and experienced CAD designer with a strong background in 3D modeling, technical drawing, and design visualization. My work has been recognized at the Michigan Industrial and Technology Education Society (MITES) competition, where I earned 1st place for a Lanz Bulldog Tractor model and 4th place for a radial engine design. I specialize in creating detailed animations, renderings, working drawings, geometric constructions, orthographic projections, and section views. I’m also skilled in toolpath generation and simulation using Fusion 360. Proficient in a variety of industry-standard CAD tools, including Autodesk products, Siemens NX, SolidWorks, Fusion 360, and Onshape, I’m ready to help bring your concepts to life with precision and clarity.

I am a Mechanical Design Engineer with 25+ years’ experience in multiple disciplines and multiple design software packages. I have experience in large or small intricate assembly design from scratch.... Read more

I am a Mechanical Design Engineer with 25+ years’ experience in multiple disciplines and multiple design software packages. I have experience in large or small intricate assembly design from scratch. File preparation for CNC use is not an issue (laser, plasma cutter, router, and others). Well versed in weldment design and machined part design with GD&T. Raw material calculation and BOM dissection for project order quantities. Please do not hesitate to ask!

"Hi, I'm Rizwan, a seasoned CATIA V5 designer with hands-on experience in the aviation/aerospace industry. I specialize in full-cycle mechanical and electrical design, delivering high-precision soluti... Read more

"Hi, I'm Rizwan, a seasoned CATIA V5 designer with hands-on experience in the aviation/aerospace industry. I specialize in full-cycle mechanical and electrical design, delivering high-precision solutions for complex projects. Expert in: Part Design & Generative Shape Design (advanced surfacing) Assembly Design & management of large-scale structures Electrical Harness Installation (routing, wiring, EWIS, formboards, and integration) Reverse Engineering (scan-to-CAD conversion, legacy part updates, and digitization) With proven expertise from designing aircraft components and systems, I ensure designs meet aerospace standards for accuracy, manufacturability, and performance. Available for freelance/contract projects remote or collaborative whether it's parametric modeling, complex assemblies, electrical integration, or reverse engineering legacy parts. Let's turn your concepts into manufacturable reality. Open to aerospace, automotive, defense, and industrial opportunities!"

SolidWorks Expert & Mechanical Designer | CSWP Certified With over 10 years of professional experience in mechanical engineering, I specialize in delivering high-precision 3D modeling and product des... Read more

SolidWorks Expert & Mechanical Designer | CSWP Certified With over 10 years of professional experience in mechanical engineering, I specialize in delivering high-precision 3D modeling and product design solutions. As a Certified SolidWorks Professional (CSWP), my core strengths include complex assembly design, sheet metal fabrication, and optimizing products for manufacturing. Key Highlights: Accomplishments: Successfully led 50+ mechanical design projects from initial concept to production-ready documentation. Project Expertise: Extensive background in industrial machinery, consumer product enclosures, and structural components. Education: Background in Mechanical Engineering with a BEng. with advanced certifications in SolidWorks software, mechatronics certificate in Japan (Scholarship) and an AAS in Mechanical Engineering Technology Design. I am committed to providing efficient, high-quality design work on a part-time basis, with immediate availability for night-shift projects.

Detail-oriented and motivated 4th-year Mechanical Engineering Technician student at seeking an entry-level position in mechanical design or manufacturing. Possesses hands-on experience with AutoCAD an... Read more

Detail-oriented and motivated 4th-year Mechanical Engineering Technician student at seeking an entry-level position in mechanical design or manufacturing. Possesses hands-on experience with AutoCAD and SolidWorks, proficiency in creating 2D/3D visualizations and technical documentation, and a proven ability to contribute effectively in a professional design environment. Eager to apply academic knowledge and practical skills to support engineering projects. Education: Mechanical Engineering Technician, 4 курс обучения, Дата окончания: Jun 2026 Study location: Vladimir Aviation Mechanical College (VAMk), [Vladimir] Projects: Creation and subsequent design of the Hull for the system and the control system itself for small and medium-sized shipping based on the principle of signal transmission via LAN or (if necessary WiFi) Skills: CAD & Design Software: Proficient in AutoCAD (2D drafting, detailing), SolidWorks (3D modeling, assembly design, sheet metal, basic simulations - if used). Technical Documentation: Experienced in creating Engineering Drawings in all planes, Bill of Materials (BOM), Technical Specifications, Manufacturing Process Plans. Visualization: Strong ability in both 2D Drafting and 3D Modeling & Visualization for design communication and prototyping. Manufacturing Processes: Understanding of common manufacturing techniques (Mainly CNC milling and turning groups), as well as welding technologies, foundries and 3D printers Technical Skills: Reading and interpreting technical drawings, basic knowledge of mechanical components and systems, understanding of materials properties. Soft Skills: Attention to detail, problem-solving, ability to work independently and collaboratively, time management (especially considering studies/work balance), willingness to learn. Work experience: New Star Marine, Moscow Jun 2024 - Aug 2024 full time Responsibilities & Achievements: Created detailed 2D drawings and 3D models of ship components and structures using AutoCAD and SolidWorks. Developed and maintained technical documentation, including part drawings, assembly instructions, and Bill of Materials (BOM). Assisted in the development of manufacturing processes for specific parts, collaborating with production teams. Contributed to design reviews and incorporated feedback to improve manufacturability. Reason for Leaving: To fully focus on completing final year studies and academic requirements. Additional Information: Languages: Russian (Native), English (Intermediate+)

Versatile engineer with design, manufacturing, and project management skills seeking opportunity to develop products from concept to completion. Experienced with injection molded plastic part design,... Read more

Versatile engineer with design, manufacturing, and project management skills seeking opportunity to develop products from concept to completion. Experienced with injection molded plastic part design, 3D printed additive manufacturing, and electromechanical assemblies. Adept at creating process documentation, informational graphics, and training presentations. Core Strengths and Expertise: > Product Development > Injection Molded Plastic > SolidWorks > DFM and DFA > DFAM (Additive manufacturing and 3D printing) Achievements: > Re-engineered consumer product making it stronger, easier to mold and assemble, as well as, incorporating new features. Sales volume of new version increased by 300%. > Cemented relationship with major customer by developing fourteen new part designs, creating more than sixteen new product versions, and managing the construction of eleven injection mold tools. > Partnered with The Coca-Cola Company to deliver innovative post-mix valve from prototype to production. Tracked progress of 5 manufacturing sites, 4 test labs, 16 outside vendors, and 10 engineers to ensure product met performance and reliability standards. > Developed medical sharps disposal bin and accessories with functional improvements and backward compatibility with existing product line. > Increased production capability of complex battery back-up unit by 125% with design update and process modification. > Improved reliability and reduced cost of new printer with a patented index sensor, which took advantage of new technology to replace a complicated mechanical linkage.

Versatile designer with a passion for production-ready designs. Experienced in high performance composite powerboats, proven developer of machined assemblies, and an addict for world travel. "The... Read more

Versatile designer with a passion for production-ready designs. Experienced in high performance composite powerboats, proven developer of machined assemblies, and an addict for world travel. "The easiest way to predict the future is to create it." -A.L.

I am a Senior Mechanical Design Engineer with over 8 years of experience in product design, R&D, and manufacturing. I specialize in CAD modeling (CATIA, SolidWorks, Inventor), sheet metal & CNC design... Read more

I am a Senior Mechanical Design Engineer with over 8 years of experience in product design, R&D, and manufacturing. I specialize in CAD modeling (CATIA, SolidWorks, Inventor), sheet metal & CNC design, and turning prototypes into production-ready solutions. I have hands-on expertise in mechanical assemblies, industrial prototypes, and custom machinery, and I can deliver precise 3D models, technical drawings, and design-for-manufacturing (DFM) solutions. Whether you need innovative product development, complex assembly design, or production-ready CAD models, I provide accurate, professional, and efficient solutions to meet your project goals.

Naval Architect / Marine Engineer with 8+ years of experience with CAD softwares. Specially AutoCAD and Rhino 3D.

Naval Architect / Marine Engineer with 8+ years of experience with CAD softwares. Specially AutoCAD and Rhino 3D.

Almost 11 years Automotive T1 experience and brief experience in mechanical designing: o A/C outlets o Cooling Hoses o Radiator Air Deflectors o Fuel Tank brackets More than 7500 hours of CATIA v... Read more

Almost 11 years Automotive T1 experience and brief experience in mechanical designing: o A/C outlets o Cooling Hoses o Radiator Air Deflectors o Fuel Tank brackets More than 7500 hours of CATIA v5 experience along with 10 years of overall CAE experience. Knowledge and experience in using Teamcenter, SolidWorks, and AutoCAD Chassis modeling experience. Coordinates well with styling teams, design engineers, quality, GD&T, materials teams, and purchasing.

I am a tool and die designer with Solidworks experience. I am the designer at a small, family owned tool and die shop that specializes in progressive stamping tools. We also design and build machining... Read more

I am a tool and die designer with Solidworks experience. I am the designer at a small, family owned tool and die shop that specializes in progressive stamping tools. We also design and build machining and welding fixtures. I also design for and run a CNC plasma cutter. The majority of the work for the plasma cutter revolves around signage, shims, and simple sheet metal parts.

I have a strong background in Stamping. My experiences include Die design for Tesla Motors, Gauge and Fixture Design for CG Automation, and currently FEA and Process Engineering for Toyota Motors. My... Read more

I have a strong background in Stamping. My experiences include Die design for Tesla Motors, Gauge and Fixture Design for CG Automation, and currently FEA and Process Engineering for Toyota Motors. My Skills include Catia Surfacing, Process development, FEA, NX for Die Design and surfacing, and Rhino3D for rapid prototyping.

Jeff Peterson has 20 yeas 3D CAD experience and he started his career working in a small machine shops and factories. He graduated up through the trades. Got his degree in Vocational Education in Mach... Read more

Jeff Peterson has 20 yeas 3D CAD experience and he started his career working in a small machine shops and factories. He graduated up through the trades. Got his degree in Vocational Education in Machine Trades after a short career teaching High School he took a position in industry as a inspector in the quality control department of an automotive seat belt company. He was promoted into engineering where he was assigned to the drafting and modeling department. From there he was promoted into a new R&D department. He came up with many new ideas and 5 were patented. And being the designer he was responsible for the product including purchasing, incoming inspection, manufacturing, testing, quality control, shipping and finally field return analysis. He furthered his career by taking a position position with an automotive supplier as a designer of plastic parts, rubber hoses, ridged steel tubes, stamped metal, plastic injection molds for Ford, Chrysler, GM, Honda, Nissan, John Deere, Caterpillar, and Navistar. Jeff is a great fit for any mechanical design, tool design, project management, new product development or process analysis because of his extensive experience in design, manufacturing, product development, machine trades, quality control, 3D modeling, drafting, print reading, design and creative imagination. Feb 2015 completed CATIA modler, Enovia and Kola training. Jeff also had an antique repair/refinish/woodworking side business so he is familiar with furniture manufacturing Manufacturing engineering, machining, 3D CAD design, Plastic part design, mold design, tool design, fixture design, gauge design, 2D drafting, medical equipment design and repair, GD&T, SPC, woodworking, automotive interior design, safety systems (seat restraints) design. Test machine design, Test design, Work instructions, time studies, operator training, quality control. Five patents for restraint component design. Worked with Ford, GM, Chrysler, Honda, Nissan, John Deere, Caterpillar, Navistar, Volvo, Seat belts, child seats, mold design, machining, tube design, hose design, glass, design, seal design, machine design, furniture design, machining . fixture design, time studies MS office, SDRC i-deas, AutoCAD Inventor, AutoCAD Mechanical Desktop, Pro-E, Siemens NX, KOLA, CATIA, Enovia, Time studies, Operator Instructions, Operator Training and Quality Control, FMEA, Kaizen, 5 why, plant layout, material handling, lean manufacturing, cell layout

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airfra... Read more

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airframe manufacturer. There I learned and used CATIA v4 and was fully trained in CATIA v5. I've spent the last 10 years working in various design roles as an individual contributor and design lead of cross functional teams on simple and complex projects with values exceeding $15 million. I have advanced skills in CATIA v5 in areas of solid modeling, complex surfacing, assembly design, and drafting as well as bill of material and bill of specification creation, modification, and maintenance. I also have intermediate skills in the CATIA v5 kinematics package.