Hire the best freelance Structural Engineering Optimization expert designers for your company

I’m Sergio Perez Fontana, an Aerospace Engineer, Manager, and Technologist with over 30 years of experience in Flight Sciences and Structures. My career spans many successful aircraft programs at Boei... Read more

I’m Sergio Perez Fontana, an Aerospace Engineer, Manager, and Technologist with over 30 years of experience in Flight Sciences and Structures. My career spans many successful aircraft programs at Boeing, Gulfstream, Bombardier, Bell Helicopter, and Embraer, where I led cross-functional teams in driving innovations through process and design optimization. I’ve led the implementation of advanced methodologies integrating advanced aerospace and exponential technologies for aircraft and other high-performance products maximizing efficiency and effectiveness. I have also developed a deeper specialty in Generative Design and Structural Optimization. Since 2014, I’ve explored and applied topology optimization and AI-driven generative design techniques, leveraging various generative design tools to inspire better, more efficient designs. For example, I contributed to achieving significant weight reduction in thick aluminum plates used to support heavy monuments on the Boeing VC-25B New Air Force One Presidential Aircraft, achieving tangible benefits in structural performance and cost. Traditional design methods often yield heavy, costly parts with underutilized material after long design processes. Every structural component, regardless of the scale of the project or budget, can benefit from my proprietary AI-driven workflows to transform conventional designs into structures that are: - Stronger and lighter: Eliminating unnecessary mass while exceeding performance requirements. - Optimized for manufacturability: Custom-tailored for efficient, scalable production using subtractive or additive processes. - Cost-effective and ready for validation: Minimizing engineering effort and material usage while seamlessly integrating into certification and operational workflows. This approach delivers high-quality structural engineering solutions faster and at a lower cost. Whether you’re developing an advanced component for a Martian flying vehicle or a flying hydrofoil board over water, I bring deep aerospace expertise and advanced AI tools to help you overcome your design challenges.

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for... Read more

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for hardware start-ups, SME's and crowd-funded projects from all over world. Fostering design innovation to optimize functionality, aesthetics and manufacturing costs. Combining radical ideas with technical expertise to make unique and leading products. With expertise in design and prototyping, I am seeking clients who need innovative engineering solution for their businesses. Expertise: * Design innovation. * Concept development. * Product engineering. * System engineering. * Design and cost optimization. * Functional prototyping. * Vendor sourcing for industrial manufacturing.

Highly motivated and dynamic BEng Civil and Structural Engineering graduate, who demonstrates an innate adaptability to meet client priorities and set goals. With a strong passion for 3D Modelling & C... Read more

Highly motivated and dynamic BEng Civil and Structural Engineering graduate, who demonstrates an innate adaptability to meet client priorities and set goals. With a strong passion for 3D Modelling & CAD, I am a creative innovator who enjoys using my technical mind to design structures, solve problems and shape the world around me. My software experiences include AutoCAD, Revit, Meshmixer and Fusion 360. With a passion for continually developing my strengths and abilities, I complete tasks to the highest standard, with attention to detail. I am a strong communicator who can foster the key relationships required to achieve success. Having undertaken several summer placements and design experiences, I am equipped with the technical skills required to meet client requirements.

I am a specialist engineer with over 16 years of international experience in finite element analysis (FEA), CAD modeling, and structural engineering of wind turbine blades, FRP composites, and bolted... Read more

I am a specialist engineer with over 16 years of international experience in finite element analysis (FEA), CAD modeling, and structural engineering of wind turbine blades, FRP composites, and bolted joints. My career has been dedicated to solving highly complex structural challenges in renewable energy, with a strong track record in both consulting and hands-on engineering for OEMs in Europe, China, and India. My expertise covers the full cycle of structural development: from design and optimization using FEA, to certification and compliance with international standards, to damage analysis and retrofitting of existing components. I am recognized as an FEA expert, with advanced skills in ANSYS (Workbench, APDL, ACP), RFEM, Abaqus, and Nastran, and I have led the certification of more than 200 wind turbine components and over 50 rotor blades. Beyond analysis, I am also a developer of proprietary engineering tools that streamline and automate structural calculations. These tools have significantly improved efficiency, accuracy, and reliability in structural evaluation and certification processes for my clients. Alongside FEA expertise, I bring strong CAD and 3D modeling skills with ANSYS Discovery, ANSYS SpaceClaim, NX, Creo, and CATIA, enabling me to support projects from initial concept models through to advanced simulation and certification documentation. I hold a Master of Science in Mechanical Engineering (Bremen University of Applied Sciences, Germany) and a Master of Science in Process & Energy Technology (Bremerhaven University, Germany), complemented by postgraduate studies in Wind Energy (Gotland University, Sweden). Fluent in English, German, and Spanish, I work comfortably in multicultural and cross-functional teams, coaching peers and delivering solutions that combine technical rigor with business impact. I help clients achieve optimized, certifiable, and reliable designs through advanced simulation, structural analysis, and CAD/FEA integration. Whether you need concept development, detailed simulation, or certification support, I deliver engineering services that reduce risks, shorten development cycles, and ensure compliance with global standards.

I'm a mechanical engineer who has been working for Fiat Chrysler Automobile for 4 years. In FCA I'm a structural analysis engineer for the powertrain department. I have a deep knowledge of the cyl... Read more

I'm a mechanical engineer who has been working for Fiat Chrysler Automobile for 4 years. In FCA I'm a structural analysis engineer for the powertrain department. I have a deep knowledge of the cylinder head and cylinder block thermostructural analysis using FEM (finite element method) software like Abaqus, Hyperworks and FEMFAT for the LCF and HCF fatigue. In this years I'have increased my casting process knowledge, collaborating with foundry and simulating the residual stress field of different cylinder heads during the water quenching phase with Procast software. FEM Software skills: Abaqus (expert level) Hyperworks (expert level) FEMFAT (expert level) Procast (expert level) Optistruct (expert level for topological optimization) Simulia Isight (expert level for shape optimization) CAD Software skills: Siemens NX (basic level) General Software skills: Excel (expert level) Powerpoint (expert level)

With a Bachelor’s degree in Civil Engineering and Masters in structural engineering over Three years of experience in designing and managing structural projects, I am excited about the opportunity to... Read more

With a Bachelor’s degree in Civil Engineering and Masters in structural engineering over Three years of experience in designing and managing structural projects, I am excited about the opportunity to contribute to your esteemed team. In my previous role at a DAR and Khatib and Alami [K&A] I was responsible for overseeing various phases of construction projects, from initial design and analysis to final implementation . My hands-on experience with advanced structural analysis software, coupled with my ability to collaborate effectively with architects, Mep, and clients, has enabled me to successfully complete projects on time and within Time. I look forward to the possibility of discussing my application further. Please find my Portfolio attached for your review Thank you Revanth N Structural engineer ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Civil Engineer with over 7 years of hands-on experience in steel tower construction, including telecommunication, meteorological, and mobile towers (lattice, monopole, guyed mast, and cell on wheels).... Read more

Civil Engineer with over 7 years of hands-on experience in steel tower construction, including telecommunication, meteorological, and mobile towers (lattice, monopole, guyed mast, and cell on wheels). Proven track record in site evaluation, foundation design, steel erection, earthing systems, and electrical works. Adept at managing construction documentation (TSSR, CPR), coordinating teams, and overseeing site execution with a focus on safety, quality, and cost efficiency. Skilled in project planning, contract administration, and technical problem-solving, with a strong foundation in structural and civil engineering principles.

BIMbutler is a licensed service provider with over 8 years' experience, 180 projects and 40 specialists on board. We offer BIM services to a wide range of construction companies and individual archite... Read more

BIMbutler is a licensed service provider with over 8 years' experience, 180 projects and 40 specialists on board. We offer BIM services to a wide range of construction companies and individual architects mainly based in UK, USA and Australia. Our core values are: - pro-active communication ------ (you get pro-active team constantly pushing your project forward) - quality ------ (each job passes throug 3-step internal quality-control before it comes to you) - critical thinking ------ (we get the job done and think about possible changes that bring additional value to you) We specialize in - Green building - Microbiology and food laboratories design The tools we use: - AutoCAD - AutoCAD Architecture - AutoCAD MEP - Showcase - AutoCAD Raster Design - ReCap - 3ds Max - Navisworks Manage - Revit - Inventor - Robot Structural Analysis Professional - MagiCAD - Tekla Structures Standards we use: - PAS1192-2 Services overview: 1 Concept design --1.1. Briefing stage --1.2. Concept preparation --1.3. Definition preparation 2 BIM for analysis --2.1. Clash detection --2.2. Construction optimization --2.3. Energy & insolation analysis --2.4. GMP compliance 3 BIM content creation --3.1. BEP (BIM execution plan) preparation --3.2. Architecture design --3.3. Construction design --3.4. MEP design --3.5. HVAC system design --3.6. Automation & low power networks design 4 Conversion to BIM --4.1. CAD to BIM --4.2. Paper archives, images and PDF to BIM --4.3. Raw files to BIM (point cloud, 3d scanners, etc) --4.4. CAD symbols to Revit families Solutions overview: - pharma - microbiology labs - food labs - chemical labs - energy efficiency and green building

Co-Founder of Prosim Engineering. As Prosim, with our extensive engineering experience, deep knowledge base, and expertise in sectors such as aviation, defense, marine, automotive, energy, etc., we p... Read more

Co-Founder of Prosim Engineering. As Prosim, with our extensive engineering experience, deep knowledge base, and expertise in sectors such as aviation, defense, marine, automotive, energy, etc., we provide pioneering engineering simulation services using industry-leading engineering and optimization software, delivering the best and fastest solutions to our customers.

Civil Engineer | Concrete Structure Design Specialist | Water & Wastewater Treatment Expert I bring 25 years of progressive experience in civil engineering, with 15 years dedicated exclusively to the... Read more

Civil Engineer | Concrete Structure Design Specialist | Water & Wastewater Treatment Expert I bring 25 years of progressive experience in civil engineering, with 15 years dedicated exclusively to the design of concrete structures for diverse industrial, commercial, and infrastructure projects. My expertise spans from conceptual planning to detailed design, ensuring structural integrity, cost efficiency, and compliance with international codes and standards. In addition, I possess comprehensive knowledge and hands-on experience in the design, operation, and optimization of water and wastewater treatment plants. This includes developing practical, sustainable solutions to meet regulatory requirements and environmental goals while maintaining operational efficiency. Key Highlights: 25 years of civil engineering experience, including 15 years in concrete structure design (residential, commercial, and industrial). Proven expertise in water and wastewater treatment plant design and operation, including process optimization. Strong understanding of international building codes, quality standards, and project management practices. Multilingual communication skills: Fluent in Bengali (native), English, Hindi, Urdu, and Arabic, enabling effective collaboration with clients, contractors, and multicultural teams. Adept at delivering projects on time, within budget, and aligned with client objectives. Whether you need innovative structural designs, detailed civil engineering plans, or specialized expertise in water infrastructure, I provide reliable, high-quality solutions tailored to your project needs.

I believe, my ability to think out of the box enables me to challenge myself, and the most fundamental concepts. My experience in benchmarking prevalent analysis tools (Ansys / Nastran) by coding in M... Read more

I believe, my ability to think out of the box enables me to challenge myself, and the most fundamental concepts. My experience in benchmarking prevalent analysis tools (Ansys / Nastran) by coding in MATLAB ensures my analysis is not constrained by commercial analysis tools. I’m confident that my skills and passion for industry are a perfect match to the company looking for a motivating Designer. I hold a Master’s degree in Aerospace Engineering from University of Sydney and have worked as Senior Design Engineer for Larsen & Toubro's Technology Development Centre that caters to the conglomerate's Aerospace division. After which, I worked as a design and development engineer for Bauer GMBH. I look forward for an opportunity to work on projects where I can improve my skills and strengths with the accomplishment of the clients goals and objective.

I am an aerospace engineer with hands-on experience in aerodynamics, structural design, and optimization, backed by research at DLR and practical roles in the marine and energy sectors. I specialize i... Read more

I am an aerospace engineer with hands-on experience in aerodynamics, structural design, and optimization, backed by research at DLR and practical roles in the marine and energy sectors. I specialize in developing efficient systems using CFD, experimental testing, and data driven analysis, and I have led technical teams on complex refit and maintenance projects. My background includes designing UAV components, enhancing turbine performance, and modeling wind energy systems, supported by a strong academic foundation across leading European universities. I aim to create resilient and high-performing engineering solutions that align with future mobility and clean energy needs.

A licensed Structural Engineer with [X] years of experience dedicated to bridging the gap between innovative architectural vision and practical, cost-effective structural solutions. I help design firm... Read more

A licensed Structural Engineer with [X] years of experience dedicated to bridging the gap between innovative architectural vision and practical, cost-effective structural solutions. I help design firms and developers achieve complex geometries while ensuring buildability, code compliance, and maximized material efficiency. Design Optimization & Value Engineering: Expertise in preliminary structural concept development to reduce construction costs by an average of [X]% through smart material choices and optimized structural layouts. Advanced Analysis: Proficient in finite element analysis (FEA), dynamic loading, and seismic design for [mention specific types: e.g., high-rise, commercial, unique foundations]. BIM & Collaboration: Seamless integration using Revit Structure, Tekla, and [Other Software] to maintain a coordinated, clash-free model that speeds up the RFI process. Detailing & Documentation: Delivering crystal-clear, accurate structural drawings and shop drawings that minimize errors on site. ETABS/STADD/CAD/SAFE

I am an Aerospace Engineering graduate (MSc. Distinction) and a certified technical specialist focused on delivering high-precision design and validation services. I don't just draft; I apply complex... Read more

I am an Aerospace Engineering graduate (MSc. Distinction) and a certified technical specialist focused on delivering high-precision design and validation services. I don't just draft; I apply complex engineering principles to optimize parts for performance, cost, and manufacturability. QUANTIFIABLE RESULTS & ENGINEERING EXPERTISE My engineering background means I focus on delivering designs that achieve measurable value for your project: Cost & Material Optimization: Proven track record, including reducing production costs by 40% on an innovative river cleaning machine and achieving 20% material optimization. Structural Integrity: Utilized iterative CAD modeling and structural analysis to reduce off-road vehicle weight by 40% while enhancing structural integrity by 25%. Aerodynamics & Compliance: Expertise in CFD (master’s level) and ANSYS Fluent to ensure designs meet high safety and technical compliance standards. Technical Drawings: Expert in generating precise 2D technical drawings and applying GD&T for clear manufacturing instructions. I thrive on challenging projects that demand high analytical skills and a precise technical approach. Let's build your next innovative product with engineering excellence.

I am a Structural & Mechanical Analysis Engineer with advanced experience in finite element methods (FEA), composite structures, and mechanical design for aerospace, defense, and automotive applicatio... Read more

I am a Structural & Mechanical Analysis Engineer with advanced experience in finite element methods (FEA), composite structures, and mechanical design for aerospace, defense, and automotive applications. I hold a bachelor’s degree in Mechanical Engineering and I am currently pursuing a master’s degree in Solid Mechanics. I specialize in the complete structural analysis workflow, including geometry preparation, meshing, composite layup modeling, load definition, contact modeling, result evaluation, and engineering reporting. I have strong hands-on experience with ANSYS Mechanical, APDL, SpaceClaim, Ansys Composite Pre-Post, and MSC Apex. My technical expertise includes: • Linear & nonlinear static analysis • Modal, buckling, frequency, and vibration simulations • Composite material modeling, failure criteria, and damage tolerance • Contact, meshing optimization, and complex assembly preparation • Load case development and structural performance evaluation • APDL scripting and automation of analysis processes • Weight estimation, optimization, and structural improvement studies Selected project experience: • Structural analysis of UAV components (wings, tails, fuselage sections, brackets, landing gear) • Composite layup modeling and strength evaluation for aerospace structures (AKINCI, TB-3, KIZILELMA) • Modal and damage resistance analysis of avionics brackets and landing gear components • Flow simulation over NACA airfoil using RBVMS formulations • Crash management system optimization for automotive applications • Flight control surface and actuator design, dynamic modeling, and system simulation • Rocket launch and landing equations and dynamic modeling studies I am highly detail-oriented, analytical, and passionate about solving complex engineering problems. My goal is to deliver precise and reliable FEA results supported by clear technical documentation and practical engineering recommendations. If you need professional support in structural analysis, composite structures, FEA modeling, or mechanical design, I can help you achieve accurate and high-quality results.

I've been interested in structural strength since I was a child, later choosing to become a mechanical engineer, learning how to achieve high-quality products with optimized shape and light weight. I... Read more

I've been interested in structural strength since I was a child, later choosing to become a mechanical engineer, learning how to achieve high-quality products with optimized shape and light weight. I have a lot of experience from many different areas of engineering, like equipment for transformers (tap-changers and bushings), power towers and masts, machines, mechanisms, cranes and much more. As could be seen from the numbers of softwares I have used, I am a very quick learner which also means that I most often can understand a project or problem and start my work on it very quick. But I always try to have an open mind, knowing that good quality often comes from assessing several alternativs before choosing, An important goal is to give my customers early indications when finding room for improvement of a product/project. Many have been astonished by the speed of my work, but quality is more important for me than speed. Of course, high speed often means lower costs in the end.

I am a Civil Engineering with a focus on structural design and the use of modern design technologies. My experience includes preparing sheet metal cutting and bending plans for fabrication, working wi... Read more

I am a Civil Engineering with a focus on structural design and the use of modern design technologies. My experience includes preparing sheet metal cutting and bending plans for fabrication, working with AutoCAD to ensure maximum accuracy for laser cutting. My key skills include: - Structural design according to Eurocode 2 - AutoCAD, DXF/DWG optimization - Technical drawings for metal cutting and processing - Analysis and dimensioning of reinforced concrete elements My ambition is to develop my career as a project engineer and contribute to modern and efficient construction projects.

A design engineer at a leading engineering consultancy, providing cost effective solutions to the industry. Background in product development, conceptual design, detail design, finite element analysi... Read more

A design engineer at a leading engineering consultancy, providing cost effective solutions to the industry. Background in product development, conceptual design, detail design, finite element analysis, 2D drawing generation, manufacturing, project management, resource management, optimization and testing procedures. Well versed in engineering standards (ASME, DIN EN, BS) Good background in project management, total quality management and statistical process control. High level of expertise in Microsoft Excel, have created macros, userforms and fully automated spreadsheets for supply chain management, inventory control, manufacturing time and cost estimation and engineering calculations.

I am a Mechanical Engineer with strong expertise in FEA and CFD using ANSYS to analyze and optimize complex mechanical and multiphysics systems. I focus on precise structural, thermal, and fluid-flow... Read more

I am a Mechanical Engineer with strong expertise in FEA and CFD using ANSYS to analyze and optimize complex mechanical and multiphysics systems. I focus on precise structural, thermal, and fluid-flow simulations for high-performance engineering applications. I also use Python and machine learning to automate simulation tasks, speed up design studies, and create efficient optimization workflows. My experience includes stress and thermal analysis, fluid-flow modeling, and building high-quality CAE models for advanced engineering projects.

We are a dedicated team of Mechanical Engineering professionals specializing in CAD design, 3D modeling, FEA analysis, and design optimization. Our goal is to deliver accurate, efficient, and high-qua... Read more

We are a dedicated team of Mechanical Engineering professionals specializing in CAD design, 3D modeling, FEA analysis, and design optimization. Our goal is to deliver accurate, efficient, and high-quality engineering designs tailored to meet the specific needs of each client. With a strong foundation in mechanical design and simulation, we bring technical precision and creativity to every project we handle. Using industry-leading tools like SolidWorks, AutoCAD, and ANSYS, we transform ideas and concepts into detailed and realistic 3D models. Whether it’s a single part or a complex assembly, we ensure that every model meets professional engineering standards and is ready for visualization, analysis, or manufacturing. Our core expertise includes: Component and Assembly Modeling: Creating high-quality 3D representations of mechanical systems with precision and design intent. Structural and Thermal FEA (Finite Element Analysis): Performing simulations using ANSYS to evaluate strength, deformation, and heat transfer under various loading conditions. Design Optimization: Improving product performance, reducing material use, and enhancing overall reliability through iterative analysis. Assembly Configuration and Motion Setup: Defining realistic motion and constraints within assemblies to simulate actual working conditions. Model Refinement and Updates: Making design modifications and improvements based on client feedback and evolving requirements. We believe in maintaining close communication with clients throughout the design process to ensure that every project is completed to satisfaction. Our approach combines engineering accuracy, problem-solving skills, and attention to detail, ensuring that the final output not only meets technical requirements but also exceeds expectations in terms of quality and presentation. At our core, we value accuracy, efficiency, and on-time delivery. Every project, regardless of its scale, is handled with a commitment to engineering excellence and client satisfac

I’m a mechanical engineer with over 10 years of professional experience in Finite Element Analysis (FEA), focused on solving complex engineering problems related to structural strength, stiffness, vib... Read more

I’m a mechanical engineer with over 10 years of professional experience in Finite Element Analysis (FEA), focused on solving complex engineering problems related to structural strength, stiffness, vibration, crashworthiness and topology optimization. Expertise includes: • Linear and Non-linear analysis • Static and Dynamic analysis • Implicit and Explicit analysis • Optimization • Material testing and building material FEM models • Materials: metals, composites, plastics, foams, honeycombs.. Deliverables: • Pre-Processing (Meshing) • Solving • Post-Processing (Results) • Design improvement proposals • Technical Report • FEA Consulting

Solidworks, Fusion 360, Blender & ANSYS. Aerospace designing, Drones & product structure optimization. Experience in abstract based designs, knowledge on structural designs & robotics.

Solidworks, Fusion 360, Blender & ANSYS. Aerospace designing, Drones & product structure optimization. Experience in abstract based designs, knowledge on structural designs & robotics.