Hire the best freelance Sensor Design expert designers for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

o Technical Skill: • Good at Plastic mold, Press Tool, Jigs & Fixtures, and Die Casting Die Designing • Skilled in Plastic product design & Sheetmetal design • Good drawing reading and interpretati... Read more

o Technical Skill: • Good at Plastic mold, Press Tool, Jigs & Fixtures, and Die Casting Die Designing • Skilled in Plastic product design & Sheetmetal design • Good drawing reading and interpretation skills • Good GD&T & GPS skills • Proficient in using PDM (Windchill) and PLM (Ennovia) tools • Proficient in Microsoft Office tools o Non-Technical Skill: • Comprehensive problem-solving abilities • Good verbal and communication skills • Ability to deal with people diplomatically • Willingness to learn, team facilitator

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and So... Read more

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and Software developments, Commercial Interior / Exterior Lighting product design and manufacturing. We possess following technical domain expertise. · Multi layer PCB Design and development · Flexible PCB Design for Wearable electronics · Customize boards for GPS, Time of Flight (ToF) sensors. · Customize boards for Langmuir Probe biasing, Ramp Generator,Pulse power circuits. · Customize high speed ADC boards for various scientific experiments · Customize Data Logger and Data Acquisition system. · Embedded Software/Hardware system development for an application area like Robotics, Instrumentation,Automation and Aviation. · Fiber Optic based data links for analog and digital signal for instrumentation · Customized micro controller like AVR,Cortex,PIC, based development board design · Circuit design and development of various applications for accurate measurement of time/frequency/pulses. · Customized Embedded Software, Circuit designs and development for various sensors like temperature (RTD/TC), ultrasonic, capacitive, acoustic, optical,ToF etc. · Customized Embedded Software, Circuit designs and development for IMU sensor's Magnetometer, Gyroscope , Accelerometer etc. · Power supply design like Linear or SMPS (buck/boost) etc. · Analog and Digital Circuits design and development · Wearable electronics product design · LED Lights and Driver circuit design · Wireless/ RF circuits design · Electronic Component Supplier

Design engineer with experience in Solidworks and FreeCAD. Well versed in product design and development with prototyping experience using additive manufacturing. I have worked on critical sensor asse... Read more

Design engineer with experience in Solidworks and FreeCAD. Well versed in product design and development with prototyping experience using additive manufacturing. I have worked on critical sensor assemblies for point of care devices.

Key skills: Optical Design, Optical Metrology, Optical Measurement Techniques – Free Space and Waveguides, Optical Characterisation. TracePro, LightTools, Zemax Experienced in: Laser and LED Optics,... Read more

Key skills: Optical Design, Optical Metrology, Optical Measurement Techniques – Free Space and Waveguides, Optical Characterisation. TracePro, LightTools, Zemax Experienced in: Laser and LED Optics, Waveguides and Light Guides, Illumination, Imaging Optics, Diffractive Optics, Fiber-Based Sensing Systems, and Sensors.

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and contr... Read more

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and control theory to make superb applications and products. The name of the game is successful integration between different domains, which is a missing skill searched by many engineers, and needed by many Start-ups. I am new here, but I have finished more than 60 freelancing tasks and missions in other sites. I have used PIC microcontroller and Arduino to implement so many projects, and I have even used them to make commercial products. I have the talent of integrating embedded systems with electronics and GUI interface to make a complete application. I used microcontrollers in applications like: Sensors Interfacing (GPS-Motion-Encoder-Light-Temperature-Level-Pressure-Vibration-Position) - CNC machine control - Proportional and on/off temperature controllers - Level controller - Power metering IC interfacing (Experience with ADE7953) - Wifi & IoT - GSM - SD card interfacing. Moreover, I have experinece in making integrated system between Raspberry pi and Arduino for applications that need so. Moreover, I have made many projects that involve signal electronics, power electronics, sensors and measuring systems, and signal conditioning. In addition, I and my team can give you support if you want a PCB design and soldering for your circuit. Regarding control and automation, I am finished master study in automatic control theory, and I have experience in designing embedded controllers - automatic control theory and applications - adaptive control - autotuners - system modeling & simulation- system Identification and parameters estimation - system dynamic response analysis - pole placement controllers - PID controllers - Scilab & Matlab software packages . In addition, I can give you support in PLC systems and ladder diagram programs for controlling industrial processes. In addition, I am using Java as GUI interface for my applications, so I have experience in how to make a java GUI program and to control an embedded system using it. I made several projects where I used Java to monitor sensor values, or to send control commands to electronic circuits. ِAlso I have worked before with Java libraries that serve scientific applications, like EJML matrix algebra library, JArduino (java for arduino) library, JFreeChart plotting library, ImageJ image processing libary, RXTX serial communication library, etc...

Tony Davis is a senior engineer with Navitas Solutions in Ann Arbor, Michigan. I began working in the automotive design, commercial design and aerospace defense industry in the early 2012. I receiv... Read more

Tony Davis is a senior engineer with Navitas Solutions in Ann Arbor, Michigan. I began working in the automotive design, commercial design and aerospace defense industry in the early 2012. I received his bachelor's degree in Mechanical Engineering from the Wayne State University at Detroit, Michigan in 2013. During the past 4 years my work has focused upon developing cost-effective methods for reducing carbon emission pollution by design of mobile battery solutions for commercial, industrial, and government defense industries. In that capacity, my primary clients have been state and national governments, mainly in North America. My work over the past 5 years can be summarized as covering the following subjects: · the design and evaluation of inspection and maintenance programs; · the development and application of mobile battery systems, autonomous vehicle intergration for communication sensors for vehicle system ; · investigations into the effectiveness of techniques and technologies for validating to prototypes and production intent designs, · the development of strategies for reducing product line brands of systems and assemblies and inventory for BOM's.

I design embedded electronics and PCBs for practical, buildable products. My experience includes schematic review, PCB layout, component selection, power supply design, USB/UART interfaces, battery-po... Read more

I design embedded electronics and PCBs for practical, buildable products. My experience includes schematic review, PCB layout, component selection, power supply design, USB/UART interfaces, battery-powered devices, audio circuits, displays, sensors, and microcontroller-based control systems. I work mainly with ESP32-family devices, Arduino/PlatformIO firmware, EasyEDA / KiCad, JLCPCB-ready manufacturing files, and mixed hardware/firmware bring-up. I have designed and developed ESP32-S3 audio and speech-processing hardware and firmware using I2S microphones, speaker amplifiers, SD cards, Wi-Fi, touch displays, etc. My focus is clean, manufacturable PCB layout, reliable power and grounding, clear documentation, and practical designs that can be assembled, tested, and improved quickly.

Results-driven Semiconductor Design Engineer with extensive experience in MEMS sensor design, IC-related component development, and leadframe engineering. Skilled in translating complex technical requ... Read more

Results-driven Semiconductor Design Engineer with extensive experience in MEMS sensor design, IC-related component development, and leadframe engineering. Skilled in translating complex technical requirements into manufacturable, high-precision designs using AutoCAD and practical engineering methodologies. Possess strong expertise in designing jigs and fixtures to support manufacturing efficiency, yield improvement, and assembly optimization. Experienced in working within semiconductor production environments, ensuring designs meet stringent industry standards for reliability, performance, and scalability. A hands-on engineer with a strong problem-solving mindset, capable of providing technical consulting, customized design solutions, and project-based engineering support. Passionate about delivering practical, cost-effective engineering solutions while maintaining high-quality and production-ready outputs

I have a good experience in transducer and sensor application in automotive and industrial domains. Worked on hall angle sensors ,inductive sensors , pressure sensors, speed sensor and many more from... Read more

I have a good experience in transducer and sensor application in automotive and industrial domains. Worked on hall angle sensors ,inductive sensors , pressure sensors, speed sensor and many more from design to validation.

Sensor development for AI-powered vehicles, production automation, robotics in the construction sector

Sensor development for AI-powered vehicles, production automation, robotics in the construction sector

ADC Prototypenentwicklung, founded in 2012 by Dr. Alexander Dabsch, specializes in prototype development, design-to-manufacture transition and small-series production, with a strong focus on sensor te... Read more

ADC Prototypenentwicklung, founded in 2012 by Dr. Alexander Dabsch, specializes in prototype development, design-to-manufacture transition and small-series production, with a strong focus on sensor technology and medical-device engineering. The company develops high-precision measurement systems and sensors enabled by advanced additive manufacturing processes, which are increasingly deployed in med-tech applications where accurate sensing is critical. Dr. Dabsch studied Technical Physics and Materials Science at TU Wien and completed a PhD in microsensor technology; he currently leads a research project on a multiaxial micro-force sensor at TU Wien. His expertise in microstructures and force-sensor development forms a key foundation for advancing modern medical-device technology. The company’s R&D activities focus on innovative sensor solutions, new material technologies and the integration of cutting-edge additive manufacturing into med-tech, with particular emphasis on high-precision medical sensing and material optimization for complex fabrication processes, enabling novel solutions across med-tech and other high-tech sectors.

Unique knowledge and experience in marine and subsea engineering. Significant experience in sensor and Electromagnetics technology. Designed and commercialised tens of products to the market.

Unique knowledge and experience in marine and subsea engineering. Significant experience in sensor and Electromagnetics technology. Designed and commercialised tens of products to the market.

Embedded hardware engineer with expresses in KiCAD and embedded C. Also have experience with hardware related to wireless sensor network development like LoRaWAN and Cypress Bluetooth(BLE 5.1).

Embedded hardware engineer with expresses in KiCAD and embedded C. Also have experience with hardware related to wireless sensor network development like LoRaWAN and Cypress Bluetooth(BLE 5.1).

I'm a Design Engineer. Having 2+ experienced in product development using AutoCAD and Solid works. Have been worked on sensor bracket designs And Plastic Mold Designs. Focused on B.E. Mechanical Engin... Read more

I'm a Design Engineer. Having 2+ experienced in product development using AutoCAD and Solid works. Have been worked on sensor bracket designs And Plastic Mold Designs. Focused on B.E. Mechanical Engineering.

I am an Electronics and Embedded Systems Engineer with strong experience in microcontrollers, PCB design, and electronic system prototyping. I specialize in developing embedded systems using ESP32 an... Read more

I am an Electronics and Embedded Systems Engineer with strong experience in microcontrollers, PCB design, and electronic system prototyping. I specialize in developing embedded systems using ESP32 and Arduino, as well as designing and simulating electronic circuits for real-world applications. My experience includes robotics systems, sensor integration, power electronics simulation, and PCB design. I have worked on projects involving motor control, ultrasonic sensors, IMU sensors (MPU6050), and real-time embedded programming. Technical Skills: • Embedded Systems Development (ESP32 / Arduino) • PCB Design (KiCad / Altium) • Circuit Design and Debugging • Power Electronics Simulation (PLECS / LTspice) • MATLAB / Simulink Modelling • Sensor Integration (Ultrasonic, IMU, IR Sensors) • Control Systems (PID) Example Projects: • Autonomous robot using ESP32 with ultrasonic obstacle avoidance and PID line-following • PCB design and hardware debugging for embedded systems • Power electronics simulation and analysis • Sensor-based control systems I focus on delivering reliable, well-documented solutions and clear communication throughout the project. If you need help with embedded systems, electronics design, or simulations, feel free to contact me.

• RF & High-Speed PCB Design (to 6GHz) • Multi-layer PCBs (up to 8 layers) • Wireless: Wi-Fi, Bluetooth (sensor & IoT systems) • Power Electronics: DC-DC, LDO, PMICs • Analog & Digital Circuit Design... Read more

• RF & High-Speed PCB Design (to 6GHz) • Multi-layer PCBs (up to 8 layers) • Wireless: Wi-Fi, Bluetooth (sensor & IoT systems) • Power Electronics: DC-DC, LDO, PMICs • Analog & Digital Circuit Design • Signal Integrity, Controlled Impedance, EMI/ESD • DFM / DFA, IPC standards • Prototype Bring-up & Hardware Debugging

Mechanical Engineer with 3 years of hands-on experience in mechanical design, sensor development, structural health monitoring, and advanced instrumentation. Adept in CAD modeling, simulation, testing... Read more

Mechanical Engineer with 3 years of hands-on experience in mechanical design, sensor development, structural health monitoring, and advanced instrumentation. Adept in CAD modeling, simulation, testing, and fabrication with a strong research background. Seeking to contribute to a dynamic organization where engineering expertise, innovation, and interdisciplinary collaboration can drive impactful solutions.

Highly experienced in the design, development, build and qualification of complex visual and thermal imaging camera, laser and multi-sensor systems. Coupled with hands on on experience in a production... Read more

Highly experienced in the design, development, build and qualification of complex visual and thermal imaging camera, laser and multi-sensor systems. Coupled with hands on on experience in a production/manufacturing engineering role which has allowed me to develop a strong skillset in design for manufacture, qualification and configuration management.

I am Mechanical Engineering student with strong interests in product design, automation, robotics, and advanced manufacturing. Experienced in mechanical design, fabrication, embedded systems, and sens... Read more

I am Mechanical Engineering student with strong interests in product design, automation, robotics, and advanced manufacturing. Experienced in mechanical design, fabrication, embedded systems, and sensor based hardware. Proficient in SolidWorks, PTC Creo, AutoCAD, and microcontroller prototyping. Actively seeking opportunities to contribute, learn, and grow with your organization while working on sustainable, technology-driven solutions

Currently working on my own Tiny House Project. But up for side word now and then. Previour professions: Project Engineer, Sales Engineer, Control Engineer, CNC Operator, Sensor Technician, Self Empl... Read more

Currently working on my own Tiny House Project. But up for side word now and then. Previour professions: Project Engineer, Sales Engineer, Control Engineer, CNC Operator, Sensor Technician, Self Employed. Degrees: Mechanical Engineer, CNC Operator diploma Advanced cources within Inventor 3Dmodelling with parameters, ILogig and Vault. Have a good eye for cost & production efficient solutions.

My name is Winston Wang, and I am a Mechanical Engineer with a background in rapid prototyping, aerospace design, and mechatronic integration. I’ve led a number of multidisciplinary projects at a prot... Read more

My name is Winston Wang, and I am a Mechanical Engineer with a background in rapid prototyping, aerospace design, and mechatronic integration. I’ve led a number of multidisciplinary projects at a prototyping lab, developing VTOL drones, robotic systems, and NASA-patented prototypes. My expertise includes CAD design, sensor/actuator integration, and additive/subtractive manufacturing.

I am an electronics engineer focused on embedded systems, PCB design, and industrial/IoT solutions. I work best on projects that connect hardware, firmware, and real-world data, from sensor integratio... Read more

I am an electronics engineer focused on embedded systems, PCB design, and industrial/IoT solutions. I work best on projects that connect hardware, firmware, and real-world data, from sensor integration and microcontroller programming to custom PCB development and telemetry systems. My experience includes CAN bus communication for off-road vehicles, RF telemetry, data acquisition, hardware reverse engineering, and communication protocols such as I2C, SPI, RS232, Wi-Fi, and Bluetooth. I have worked with PIC, Arduino, ESP32, C/C++, Python, and Java/Processing for telemetry and technical dashboards. I can help with: Embedded systems development PCB design, prototyping, and testing Sensor integration and data acquisition CAN bus, I2C, SPI, RS232, RF, Wi-Fi, and Bluetooth communication Firmware development in C/C++ IoT and telemetry systems Hardware analysis and reverse engineering I focus on building practical, reliable, and well-documented solutions that turn technical ideas into working hardware.

I help startups and product teams develop IoT hardware products from concept to prototype and manufacturing. My services include schematic design, PCB layout, ESP32 / STM32 hardware design, sensor in... Read more

I help startups and product teams develop IoT hardware products from concept to prototype and manufacturing. My services include schematic design, PCB layout, ESP32 / STM32 hardware design, sensor integration, power circuit design, enclosure integration support, BOM, Gerber, Pick & Place files, and prototype debugging. I can also work with mechanical CAD designers to ensure the PCB fits correctly inside the product enclosure.

Highly experienced and driven mechanical engineer with a proven track record in design, development, build and qualification of complex visual and thermal imaging cameras, laser (1535nm and 1064nm) an... Read more

Highly experienced and driven mechanical engineer with a proven track record in design, development, build and qualification of complex visual and thermal imaging cameras, laser (1535nm and 1064nm) and multi-sensor systems. Coupled with hands on experience in a production/manufacturing engineering role which has allowed me to develop a strong skillset in design for manufacture, qualification and configuration management.