Hire the best freelance LabVIEW expert designers for your company

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling an... Read more

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling and testing of materials and their implementation. Previous designs in the field of aerospace engineering include the design of a high pressure air system required to test a flight vehicle in high altitude conditions. The high pressure air system required pressure vessels to sustain the operation of the test, and were calculated to be too costly, however using recycled vessels were considered. The recycled vessels then needed to be tested before being put into service on the system. This meant cutting several critical failure sections of the pressure vessel and sending it for tensile, compression, modulus lab data. This data would then need to be scrutinized to the calculated data based on pressure vessel code and good design practice, safety factors etc. The delivery system was then modeled in ProE Creo software to be delivered to in-house machinists for material ordering and assembly, but not until modeled in AnSYS modeling comparison. This system was successfully commissioned by a engineering team effort with my design engineering assistance. Creating databases to clearly log product data, quality reports, team performance, and work load is also one of my skills using Microsoft Office Access. The custom code i wrote in VBA to easily track and print weekly data that would be discussed at design meetings in an effort to improve overall team efficiency. Using ProE to design flight vehicles for test models was also a key piece of experience to tune my design experience in fluid dynamics. As the design went from pencil and paper theoretical calculations, they were transformed into models, later tested by my team and then a full size model delivered to the customer, NASA, for field testing. Many points of aeronautical engineering experience resides in the modeling done in ProE Creo/Wildfire to develop testing models. My mechanical engineering design experience comes from a firm mostly pitched towards the development of public & private schools. We design the mechanical, HVAC, electrical, plumbing and fire protection, and civil systems. All of the engineering is done "in the same house" as the architectural design. My experience circumvents all of the engineering trades in accordance with NYS education code, the supplements, and the current IMC. Designing systems in my current atmosphere allow for the full design to be implemented without value engineering the design like an EPC. Though EPC's are also part of the job. Mechanically, I have designed HW/Steam boiler rooms, AHU systems, VRF, and the like. My fire protection experience stemmed from my family business, meaning i physically installed many types of plumbing systems and fire protection systems; it is a critical component to influence my design practice in HASS and/or AutoCAD. Many engineers call it "the third eye." My plumbing design experience resides in all types of waste and domestic systems for commercial kitchens, assisted living facilities, schools, large residences and small, also churches. As much as possible, I use my local contacts in the gas, electrical and water utilities to make my designs as solid as possible. All of my MEP & FPE design are based on maintaining code requirements while not having the customer pay for unnecessary equipment etc.

10+ years 2D-3D Mechanical Design and Rendering, Multiphysics Simulations, Programming Language, Electronic PCB Layout, Acoustic solutions.

10+ years 2D-3D Mechanical Design and Rendering, Multiphysics Simulations, Programming Language, Electronic PCB Layout, Acoustic solutions.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python,... Read more

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python, C++) PLC programming (LabVIEW, Siemens, others) Embedded design (Atmel, Microchip) Simulations (FEA, Motion) CNC (hobbyist) Animation and rendering (Blender [in progress]) ===Experience=== Process automation, automotive, food, packaging industries, product development.

I have successfully completed a number of projects related to Product Design, CAD, CAM and G-Code generation, FEM, CFD and FSI Simulations. I am proficient with SOLIDWORKS, Creo and Fusion 360 for cre... Read more

I have successfully completed a number of projects related to Product Design, CAD, CAM and G-Code generation, FEM, CFD and FSI Simulations. I am proficient with SOLIDWORKS, Creo and Fusion 360 for creating 3D models from sketches, producing animations for visualizing linear and angular motions for multi-degree of freedom systems, ensuring dimensional compatibility of mating parts, verifying their functionality and finally converting various constituent parts into manufacturing drawings. For defined materials, I can analyze the 3D digital prototypes in ANSYS in representative real-world conditions simulating the operating environment with boundary conditions. I can generate report for decision-making from the behavior that the model exhibits during analysis. I am young, energetic and highly enthusiastic for creating good reputation and an excellent profile, and want to establish my credibility through the quality of my work. I can read, write and speak English Language proficiently.

I am an Automobile Engineering student from Tamil Nadu - India, expert at 3D design and CFD analysis.

I am an Automobile Engineering student from Tamil Nadu - India, expert at 3D design and CFD analysis.

Tijani Oluwafemi Muhydeen is my name. A graduate of electrical engineering. A professional designer. Am a citizen of Nigeria.Hobbies are reading, CAD design, traveling and gaming. I am the CEO of TOM-... Read more

Tijani Oluwafemi Muhydeen is my name. A graduate of electrical engineering. A professional designer. Am a citizen of Nigeria.Hobbies are reading, CAD design, traveling and gaming. I am the CEO of TOM-e automation and consultant .

IMT professional with more than two years of experience in the aerospace industry, looking for the proven skills of mechatronic systems development and mechanical design in the position of Mechatronic... Read more

IMT professional with more than two years of experience in the aerospace industry, looking for the proven skills of mechatronic systems development and mechanical design in the position of Mechatronic Engineer.

I am a Mechatronics Engineer having experience in 3D CAD (SolidWorks, AutoCAD), simulation (ANSYS, MATLAB), and embedded systems (LabVIEW, Arduino). With experience in robotics, automation, and IoT, I... Read more

I am a Mechatronics Engineer having experience in 3D CAD (SolidWorks, AutoCAD), simulation (ANSYS, MATLAB), and embedded systems (LabVIEW, Arduino). With experience in robotics, automation, and IoT, I create precise, innovative solutions tailored for high performance and reliability. I support projects end-to-end, from initial design through to production, with a focus on clear communication and efficient project management. My approach ensures timely delivery and proactive problem-solving. If you’re looking for a dedicated engineer to bring your ideas to life, I’d be happy to discuss how I can contribute to your project’s success.

Engineering tech for PD lab developing automotive oil pumps. Designed and built EOL testing equipment for automotive oil pumps. Air to oil correlation testing and oil testing. Test equipment improveme... Read more

Engineering tech for PD lab developing automotive oil pumps. Designed and built EOL testing equipment for automotive oil pumps. Air to oil correlation testing and oil testing. Test equipment improvements, technical writer, toolmaking, and electronics technician. AutoCAD, Inventor, Solidworks, LabVIEW, Illustrator, and Photoshop. No certificates,all on the job training.

Passionate, self-motivated, creative and hard working guy. Excellent team leader and team player with fantastic references

Passionate, self-motivated, creative and hard working guy. Excellent team leader and team player with fantastic references

Comprehensive mechanical and materials knowledge from real-world applications developing and troubleshooting race tuned, naturally aspirated, and forced induction gasoline and diesel engines, suspensi... Read more

Comprehensive mechanical and materials knowledge from real-world applications developing and troubleshooting race tuned, naturally aspirated, and forced induction gasoline and diesel engines, suspensions, and fuel systems, as well as a practiced fabricator using woods, metals, fiberglass, carbon fiber, resins, epoxies, and other composites. Oversee implementation from initial project planning, scoping, and requirements through flawless deployment. Possess keen ability to identify innovative strategies to achieve ambitious objectives and the highest expectations; continually develop cutting-edge tools and methodologies to provide maximum business value.

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conver... Read more

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conversion, battery power, and audio. I have designed, built, and shipped multiple successful, high and low volume products for retail, industrial, and research markets.

I am currently working as a Mechanical Engineering in the Aerospace industry. I am good with 3D modeling and 2D drawings. I understand GD&T and also mechanical design principles.

I am currently working as a Mechanical Engineering in the Aerospace industry. I am good with 3D modeling and 2D drawings. I understand GD&T and also mechanical design principles.

- Bachelor of Science in Mechanical Engineering. - Versatile with Inventor, SolidWorks, CREO. - Responsible for multiple electro-mechanical products such as lugs, terminals, braids, cable ties, c... Read more

- Bachelor of Science in Mechanical Engineering. - Versatile with Inventor, SolidWorks, CREO. - Responsible for multiple electro-mechanical products such as lugs, terminals, braids, cable ties, casted items in the workplace. - Always have a "can do" attitude. - 3 years of customer service experience.

I am a recent graduate from the University of Nevada, Reno in Mechanical Engineering looking to launch into the freelance industry as a CAD Designer. I have 1.5 years of experience as a CAD Designer/F... Read more

I am a recent graduate from the University of Nevada, Reno in Mechanical Engineering looking to launch into the freelance industry as a CAD Designer. I have 1.5 years of experience as a CAD Designer/Freelance Engineer. I helped design a Drone Docking Station in SolidWorks, Battery Powered iPhone and iPad cases and many other projects during school. Current Engineer in Training(EIT).

SolidWorks-certified CAD Designer | 3D Modeling | High level product design EXPERT | Bring your idea to market | Design for Manufacturing (Injection Mold), Rapid Prototyping, Electronics, Market Asses... Read more

SolidWorks-certified CAD Designer | 3D Modeling | High level product design EXPERT | Bring your idea to market | Design for Manufacturing (Injection Mold), Rapid Prototyping, Electronics, Market Assessment, Patent Support. FREE CONSULTATION includes a preliminary patent search and market assessment. I have worked in a variety of industries from manufacturing to government contracting. My experience includes consumer products, consumer electronics, medical devices, and fluid/energy storage solutions. I am a PATENTED INVENTOR and can help you navigate this process while protecting your intellectual property. I am a GRADUATE EDUCATED MECHANICAL ENGINEER with a MS concentrated Microelectronics and System Packaging. I can take you from idea or problem statement to landed product for an attractive ROI.

I am a Master graduate student in Aeromechanics of Turbomachinery with very good knowledge in Aeroelasticity, Unsteady Aerodynamics, Thermal Turbomachinery, FEM, Aerodynamics, Vibrations, Structural D... Read more

I am a Master graduate student in Aeromechanics of Turbomachinery with very good knowledge in Aeroelasticity, Unsteady Aerodynamics, Thermal Turbomachinery, FEM, Aerodynamics, Vibrations, Structural Dynamics, Rotordynamics, Fatigue and Fracture Mechanics. I have hands on experience with commercial FEM and CFD softwares. I have very good knowledge in Aeronautical and Mechanical Engineering. I have 5+ years of Experience in product development and detailing of composites and metal strictures. Also proficient in PDM and Team centre. I have worked for clients like DIEHL aircabin, AIRBUS, Textron and Siemens Industrial Turbomachinery. Extensively working in MATLAB and ANSYS ( Mechanical and CFD) right now . I am looking for challenging and interesting projects in modeling or FEA or CFD or in MATLAB.

I’m a PMP-certified Mechanical Engineer (P.Eng.) with over four years of progressive experience managing complete project life cycles—from concept development to successful customer delivery. My exper... Read more

I’m a PMP-certified Mechanical Engineer (P.Eng.) with over four years of progressive experience managing complete project life cycles—from concept development to successful customer delivery. My expertise lies in leading cross-functional teams, optimizing resources, and aligning technical and business objectives to ensure project success. At AGI, I managed complex, multi-disciplinary projects, coordinating engineering, manufacturing, and sales divisions to deliver high-quality solutions on time and within scope. With strong technical proficiency in SolidWorks, AutoCAD, and Finite Element Analysis (FEA), I ensure all designs meet international safety and quality standards. Certified in both PMP® and CAPM® by the Project Management Institute (PMI), I achieved Above Target in all PMP domains. In addition to my technical and project work, I volunteer as a mentor in the Women in Engineering and Geoscience Mentorship Program, supporting the professional development of future engineers. I’m passionate about driving collaboration, innovation, and excellence in every project I lead.

My name is Winston Wang, and I am a Mechanical Engineer with a background in rapid prototyping, aerospace design, and mechatronic integration. I’ve led a number of multidisciplinary projects at a prot... Read more

My name is Winston Wang, and I am a Mechanical Engineer with a background in rapid prototyping, aerospace design, and mechatronic integration. I’ve led a number of multidisciplinary projects at a prototyping lab, developing VTOL drones, robotic systems, and NASA-patented prototypes. My expertise includes CAD design, sensor/actuator integration, and additive/subtractive manufacturing.

A dedicated, hardworking and detail-oriented mechanical engineer looking for a job involving problem solving related to designing, finite element analysis, manufacturing and maintenance through innova... Read more

A dedicated, hardworking and detail-oriented mechanical engineer looking for a job involving problem solving related to designing, finite element analysis, manufacturing and maintenance through innovative ideas that can aid the production process for maximum effectiveness and greater benefit of the company.

I am working towards a B.s. Aerospace Engineering degree at the University of Maryland - College Park. I am the Co-founder of a young tech company and have been a leader of various research efforts in... Read more

I am working towards a B.s. Aerospace Engineering degree at the University of Maryland - College Park. I am the Co-founder of a young tech company and have been a leader of various research efforts in the College Park, MD area. I have been through the challenges of product development and can bring your product to life in any phases of the design/prototyping stages. I served as a sub-team leader for the internationally famous Gamera Human Powered Helicopter project where I lead blade balancing tests for optimizing blade pairs for the quadroter helicopter. I used Solidworks, MATLAB, and LabVIEW - all extensively - during this position. I wrote C++ applications in my efforts to research optimized autonomous path planning for rovers. In addition to my physical contributions to the engineering community, I frequently freelance write on the topics of science and technology.

A mechanical engineer with a particular liking for system designs, modelling and analysis. Areas of interest are mechanics, thermodynamics and automotive. Command over AutoCAD, Solidworks, Pro-E f... Read more

A mechanical engineer with a particular liking for system designs, modelling and analysis. Areas of interest are mechanics, thermodynamics and automotive. Command over AutoCAD, Solidworks, Pro-E for modelling. ANSYS, ABAQUS, NASTRAN, PATRAN, ADAMS, SIMSCALE and SIMPACK. In addition, adequate skills in MATLAB, C++, JavaScript and web development. Control, Automation and Interfacing using Arduino and LabView Have worked with companies like SHELL in the past. Projects done include Formula Student, Human Powered Vehicle, Hyperloop, Solar Still etc

Looking for someone to assist with analysis, restructuring or presenting data? Or do you want to conceptualize and construct a physical product? Let it be anything from structural analysis to prod... Read more

Looking for someone to assist with analysis, restructuring or presenting data? Or do you want to conceptualize and construct a physical product? Let it be anything from structural analysis to product development, I can help you as a Mechanical Engineer with 3 years of R&D experience at Rambøll and 2 years of product development at DANSK TEKNOLOGI. I have a deep analytical, systematic and disciplined approach to problem solving. Currently looking for a project where I can put my analytical skills into play and through progressive technologies help solving problems that are essential to humans and nature. I thrive on number crunching in an unassisted environment and respect time-sensitive projects. Strongest competences lies within structural analysis (FEM), vibrations, motion control, topology optimization, mechatronics, and other analytically related topics.

I am mechanical engineer with training in optomechanics who is currently seeking work opportunities that will allow me flexibility as I pursue a graduate degree in Mechanical Engineering. I have a... Read more

I am mechanical engineer with training in optomechanics who is currently seeking work opportunities that will allow me flexibility as I pursue a graduate degree in Mechanical Engineering. I have a proven aptitude for working in a fast paced environment such as research and development, and an understanding of the process of bringing a product from the idea stage all the way to market. Creating new technologies, or applying technology in an innovative way to create unique in the world products that perfectly suits a customer's need is something I have found great joy in. I love being on the cutting edge of technology and discovering new solutions.

Mechatronics Student with experience in the fields of: Robotics, HVAC & Fire-Fighting, and programming. Praised for the ability to provide practical solutions and creative Ideas.

Mechatronics Student with experience in the fields of: Robotics, HVAC & Fire-Fighting, and programming. Praised for the ability to provide practical solutions and creative Ideas.

Mechanical engineer with a passion for design. Extensive design experience ranging from design wearable exoskeletons to mechanical show prop design for Walt Design Imagineering.

Mechanical engineer with a passion for design. Extensive design experience ranging from design wearable exoskeletons to mechanical show prop design for Walt Design Imagineering.