Hire the best freelance KiCad expert designers for your company

Retired Electromechanical Design Engineer with 33+ Patents seeking part-time (

Retired Electromechanical Design Engineer with 33+ Patents seeking part-time (

My diverse background enables me to conceptualize and create efficient designs, translate user needs into functional products, understand and develop electronic systems, and create detailed 3D models.... Read more

My diverse background enables me to conceptualize and create efficient designs, translate user needs into functional products, understand and develop electronic systems, and create detailed 3D models. I’m passionate about using my skills to solve complex problems, and improve lives, and am always eager to learn new technologies. Whether it’s a technical challenge or a design problem, I’m ready to bring my expertise to the table.

I am an Electronics and Electrical Engineer, graduated from the University of Peradeniya, Sri Lanka, with over 6 years of hands-on experience in PCB design and fabrication. I specialize in advanced ha... Read more

I am an Electronics and Electrical Engineer, graduated from the University of Peradeniya, Sri Lanka, with over 6 years of hands-on experience in PCB design and fabrication. I specialize in advanced hardware development for embedded systems, IoT devices, control systems, and high-performance computing platforms. My portfolio includes: Motherboard design for NVIDIA Jetson modules STM32-based flight controller PCBs High-accuracy RTK GPS modules Raspberry Pi sensor shield designs High-power motor controllers Expertise in high-speed signal routing (PCIe, USB 3.0, HDMI, CSI) I provide end-to-end PCB design services—from concept to production—including schematic capture, layout, signal integrity, fabrication support, and consulting. I am passionate about solving complex hardware problems and bringing ideas to life through innovative, real-world applications. Whether you need a robust embedded system, a high-speed PCB, or reliable design consultation, I am ready to collaborate and deliver high-quality results.

I turn electronic concepts into working prototypes. I am a dual-skilled designer specializing in the complete hardware design cycle. By handling both PCB Layout and 3D Enclosure Design, I ensure your... Read more

I turn electronic concepts into working prototypes. I am a dual-skilled designer specializing in the complete hardware design cycle. By handling both PCB Layout and 3D Enclosure Design, I ensure your circuit board fits perfectly inside its case—eliminating the need for multiple revisions. Why hire me? Seamless Integration: I sync the PCB with the 3D model in Fusion 360 to ensure every button, USB port, and mounting hole aligns perfectly. Versatile Toolset: I use Altium Designer & KiCad for professional-grade boards and EasyEDA for rapid, open-source projects. 3D Print Ready: My enclosure designs are optimized for 3D printing (FDM/SLA), ensuring clean prints and proper assembly. My Expertise: PCB Design: Schematic capture, layout, routing, and component selection. 3D Modeling: Designing custom enclosures, snap-fit casings, and project boxes in Fusion 360. Prototyping: Converting rough sketches into accurate 3D models and functional PCBs. whether you are a maker building a custom gadget or a startup validating a new product, I deliver accurate, clean files ready for printing and assembly. Let's bring your project to life. Contact me to discuss your requirements.

I'm electronic engineer specialized in high perfomance PCB design and embedded programming. I have fifteen years of experience in PCB designs for high performance boards. The last four and half yea... Read more

I'm electronic engineer specialized in high perfomance PCB design and embedded programming. I have fifteen years of experience in PCB designs for high performance boards. The last four and half years I was working in naval equipment design as echosounders and autopilots applying rigurous EMI standards. In my portfolio you can find pictures of same of my works. I know how mix digital microcontrolers, small signal conditionning and high power in same board without interfering. I use design rules recomended for manufacturers as Analog Devices, Texas Instruments, ST, etc. I have a knowlegments in net sensors area and PCB design for RF applications (2.4GHz) like Zigbee, Bluethoot and WiFi. I can work by tasks or for hour, like you prefer.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

CATIA based designing 3D products design Drone Design and simulation Automotive Design and Analysis Experience with 3d printing

CATIA based designing 3D products design Drone Design and simulation Automotive Design and Analysis Experience with 3d printing

18+ years of experience in electronic design. 100+ major design projects delivered. 200+ happy clients served. Whatever your electronic design needs are, reach out for a quick chat, you will not regre... Read more

18+ years of experience in electronic design. 100+ major design projects delivered. 200+ happy clients served. Whatever your electronic design needs are, reach out for a quick chat, you will not regret it! What to expect: ✅Top quality design that not only meets and exceeds your requirements but can also handle those unexpected conditions that make quality products stand out from the rest. ✅Rigorous design test and measurement that leaves nothing unchecked, keeping in mind not only your interests but also those of your end customers. ✅A design that is optimized and ready for manufacturing with parts readily available. ✅Exhaustive documentation and support so you can make best use of all deliverables. ✅A flexible service that can take care of all phases in the design and prototyping process or just those parts that you prefer. ✅Long-term availability for changes, revisions, and support. ✅Above all, an honest and friendly collaboration that you can trust. I invite you to reach out to discuss your project's unique needs. Regardless of your technical background, I am here to transform your product idea into a tangible reality, employing the most efficient and cutting-edge technology. My services extend beyond design, offering assistance in defining complete project requirements, recommending suitable technology, and guiding your product to production. I can also connect you with reliable suppliers and provide unwavering technical support throughout the entire process. As a full-time freelance engineer, having worked with clients from all over the world in very diverse applications, I’ve been able to gain a broad experience in electronic design. The designs I’ve produced over the years range from the simplest of designs to very complex high-density designs at the cutting edge of technology. I have gained experience with a variety of microcontrollers, processors, sensors, interfaces, protocols, and design architectures. I’ve also been able to utilize a variety to PCB technologies ranging from multilayer rigid, HDI, flexible, rigid-flex, metal-core, as well as exotic materials such as stretchable PCB. Throughout the years I’ve also invested significantly in a spacious lab and equipment for both prototyping (including pick-and-place, reflow oven and advanced JBC soldering equipment) as well as professional test and measurement equipment (including oscilloscopes, spectrum analyzers, VNA, bench meters, electronic loads, waveform generators, ECG simulator, thermographic imaging, and data loggers), all from reputable brands (Keysight, Teledyne-Lecroy, FLIR, Fluke, Tektronix, Pico,…). My vision is to produce top quality designs with a ‘whatever it takes’ attitude and am willing to invest effort and financially in ensuring that I am well equipped to do so. Some of the specific experiences include: Software tools: Altium Designer (my primary EDA), KiCad, Eagle, Proteus; SolidWorks; Ansys, Keysight-ADS, COMSOL; VS Code, Visual Studio, PyCharm, IntelliJ; Keil MDK Arm, GCC, IAR, CodeComposer, Microchip Studio; Quartus Prime, Xilinx ISE; Programming languages: Embedded C, C++, C#, Python, Rust, Java, VHDL, Bash scripts, PHP, javascript… Microcontrollers/SoC: STM32 (often preferred), ATSAM, STM8, nRF5x (often preferred for BLE applications), EPS32, CH32 (RISCV), C2000, CC2642, CC13xx, PIC16/18, AVR, MPS430, RP2040, i.MX, A20/50, RK35xx, MAX78000, … Protocols/Buses: RS485/422, USB, UART, SPI, I2C, CAN, LVDS, DDR; Modbus, NMEA2000, MQTT, … Common design features: - BLE / Wi-Fi with custom PCB trace antenna, fully simulated and tuned on prototypes. - USB charge circuit for Li-Ion battery, including fast charging. - Battery protection circuits and cell balancing. - PoE source/device/injector designs with necessary protocol handshakes. - ARM embedded processor design running embedded Linux system. - RTD measurement circuits, 3/4 wire, 24 bit, PGA and filtering. - ECG, EOG, EEG monitoring wearable designs. - IMU motion tracking with sensor fusion and quaternion streaming. - GNSS location tracking, including high precision RTK modes. - Audio capture, filtering, processing, and amplification. - DC/DC converters in various topologies including buck, boost, buck-boost, SEPIC, CUK, H-Bridge, cascaded, multi-phase. AC/DC converters (flyback, feed-forward, …). DC/AC inverters, BLDC control… - LED driving with attention to color rendering and thermal management. - Solar MPPT controller. - UHF long range wireless designs, LoRa, Sigfox. Cellular interfaces 4G, LTE, NBIoT, LTEM. My commitment to excellence, innovation, and collaboration has been the cornerstone of my career. I look forward to the opportunity to bring your vision to life, leveraging my extensive skill set and passion for electronic design. Feel free to contact me to embark on a successful journey together.

I am Ahmed Nawaz and Experienced PCB Design Engineer with experience of delivering high-quality and reliable printed circuit board layouts. Proficient in leading industry tools: Altium Designer, KiCad... Read more

I am Ahmed Nawaz and Experienced PCB Design Engineer with experience of delivering high-quality and reliable printed circuit board layouts. Proficient in leading industry tools: Altium Designer, KiCad, and Eagle, with expertise in multi-layer PCB design, signal integrity, and power distribution optimization. ★ Skills: High-speed PCB design, EMI/EMC compliance, and thermal management. ★ Software Expertise: Altium Designer, KiCad, Eagle, OrCAD ★ Technical Skills: Schematic capture, design rule checks (DRC), and PCB manufacturing process understanding. Successfully completed over 50+ PCB designs for consumer electronics, automotive, medical and IoT devices. Proficient in working with Arduino, ESP32, STM32, and Raspberry Pi. Experienced in implementing communication protocols I2C, SPI, UART, MQTT, CAN Bus, and Modbus, as well as integrating wireless technologies like BLE, LoRaWAN, Zigbee, and Wi-Fi. Skilled in sensor interfacing, RFID/NFC systems, GPS modules, RTOS (FreeRTOS, Zephyr), and designing efficient power management systems with PMICs, DC-DC converters, and LiPo charging circuits.

Thank you for visiting my profile. My name is Marko Aleksic, a dedicated electronic hardware and firmware engineer specializing in creating innovative and high-quality solutions for electronic product... Read more

Thank you for visiting my profile. My name is Marko Aleksic, a dedicated electronic hardware and firmware engineer specializing in creating innovative and high-quality solutions for electronic product development. I am passionate about transforming ideas into reality through meticulous design and development -Core Competencies: -PCB Design & Development: Expert in designing reliable, high-performance printed circuit boards (PCBs). Specialization in power supply circuits (DC-DC, AC-DC conversions) and multilayer designs for embedded systems. Proven track record in developing efficient LED driver circuits and RF PCB layouts. -Firmware Development: Extensive experience programming microcontrollers including STM32, DSPIC, ESP32 and ESP8266. Mastery of communication protocols such as UART, SPI, Ethernet, USB, CAN, and MODBUS for seamless integration. Proficient in implementing wireless technologies including Wi-Fi, Bluetooth, and ZigBee. -RF Design & Analysis: Strong capabilities in RF circuit design, antenna optimization, and simulation for applications like WiFi, Bluetooth, and RFID. Expertise in developing RF filters, splitters, transceivers, and power amplifiers tailored to specific application needs. I am committed to delivering cost-effective, high-quality solutions without compromising performance or deadlines. I welcome the opportunity to connect and discuss how I can contribute to your projects.

More than 30 years designing and manufacturing test prototypes of printed circuit boards, as well as large series manufacturing. My professional experience includes managing several production depa... Read more

More than 30 years designing and manufacturing test prototypes of printed circuit boards, as well as large series manufacturing. My professional experience includes managing several production departments, supporting the R&D department, industrial electronic technician and electronic assembler. This Knowledge and acquired skills are essential for efficiently and effectively design a 3D printed circuit board. Do you want to know more about my work? Please visit 3dpcb.es

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

Mechanical Design Engineer with 5+ years of experience in end-to-end product development across industrial machinery, medical devices, railway safety systems, and aerospace R&D. Strong expertise in 3D... Read more

Mechanical Design Engineer with 5+ years of experience in end-to-end product development across industrial machinery, medical devices, railway safety systems, and aerospace R&D. Strong expertise in 3D CAD modeling, Structural analysis, Design for Manufacturability (DFM), prototyping, and fabrication coordination. Proven ability to translate concepts and patented ideas into validated, deployable mechanical systems through close collaboration with cross-functional teams, vendors, and field stakeholders. • In CAD Crowd, I have delivered freelance mechanical and product design services to international clients, including concept development, CAD modelling, FEA support, and manufacturing-ready drawings. • So far, I have designed 15+ patent-safe, manufacturable solutions for industrial and consumer products, delivering production-ready CAD and drawings aligned with client technical requirements.

In any robotics or embedded system project, hardware design is the backbone of success. A single design mistake can cause failures, but a well-structured circuit and PCB can maximize performance, reli... Read more

In any robotics or embedded system project, hardware design is the backbone of success. A single design mistake can cause failures, but a well-structured circuit and PCB can maximize performance, reliability, and efficiency. If you want to enhance your robot’s performance or ensure your control system runs smoothly — you’re in the right place! I’m Reem, an Electronics & Communications Engineering student with strong interest and hands-on experience in circuit design and PCB layout. I’ve worked on multiple projects using ESP32, Arduino, IR sensors, and motor control, where I handled schematic design, PCB layout, and manual fabrication. Alongside my technical background, I also support clients with professional document design, including Word files, PowerPoint presentations, and Canva slides — perfect for showcasing your technical work or training content clearly and attractively. 🔹 Services I Provide: Circuit design & simulation PCB layout (single & multi-layer) Component selection & datasheet analysis Embedded systems integration (ESP32, Arduino, microcontrollers) Preparing training materials & educational content Technical writing & structured documentation Designing Word and PowerPoint files with clear, professional formatting I aim to deliver reliable, well-documented, and organized work, with clear communication and a client-focused approach to ensure satisfaction and high-quality results. Let’s talk about your project! I’d love to understand your idea and help you turn it into a practical, efficient hardware solution. Feel free to reach out. I’m always happy to discuss your goals and suggest the best path forward.

Graduated in Mechatronics Engineering from UNIT/AL in 2021, I have been a Freelance Product Design since 2018, specialized in the use of the SolidWorks tool. I currently have a mechanical design compa... Read more

Graduated in Mechatronics Engineering from UNIT/AL in 2021, I have been a Freelance Product Design since 2018, specialized in the use of the SolidWorks tool. I currently have a mechanical design company. My responsibilities include leading the sector, creating and modifying, designing templates, rendering images, programming parts for cutting sheets and tubes using Laser, Plasma and Router, as well as programming welding trajectories in the welding robot. I monitor the entire manufacturing process, from cutting to assembly of the final physical product. I have advanced skills in SolidWorks, including sheet metal, surfaces, molding, Visualize, simulation and motion study. In addition, I have extensive knowledge in Photoshop, AutoCAD, ArtCam and Embedded Systems.

I am a highly skilled Mechanical and Electrical Engineer with a BSc in Mechatronics and an MSc in Electrical Engineering. With several years of experience in SolidWorks and AutoCAD, I specialize in me... Read more

I am a highly skilled Mechanical and Electrical Engineer with a BSc in Mechatronics and an MSc in Electrical Engineering. With several years of experience in SolidWorks and AutoCAD, I specialize in mechanical design, 3D modeling, and technical drafting. My expertise includes: ✔ Mechanical design – precision components, assemblies, and manufacturing-ready drawings ✔ 3D modeling & prototyping – product development and optimization for 3D printing and manufacturing ✔ Technical documentation – detailed drawings, BOM creation, and compliance with industry standards I have successfully contributed to multiple engineering projects, ensuring functionality, efficiency, and manufacturability. Whether it's designing custom machinery, industrial components, or electrical enclosures, I am committed to delivering high-quality, professional solutions. Let’s collaborate on your next project!

Designer, artist and engineer with diverse multimedia experience including graphics, photography, motion, lighting, audio, electronics, embedded systems and more.

Designer, artist and engineer with diverse multimedia experience including graphics, photography, motion, lighting, audio, electronics, embedded systems and more.

A Naval Architect by training (registered CEng UK), with a wide range of experience from projects covering initial structural design, detailed analysis and through build implementation and regulatory... Read more

A Naval Architect by training (registered CEng UK), with a wide range of experience from projects covering initial structural design, detailed analysis and through build implementation and regulatory facilitation. Having worked for the last 10+ years in practical engineering design, my primary focus is to work to the limitations of the project time scale, materials and workforce capability. Projects have ranged from support structures for 100tonne pieces of equipment three stories above the deck of a ship, scratch designed A-frame for launch and recovery of ROVs to design evaluation of wave energy devices. Personal projects have covered electrical and electronic, metal casting, engine re-builds, vehicle restoration, new vehicle design, PCB design, and many others. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ https://hackaday.io/projects/hacker/116541

As a passionate professional in Industrial Informatics and Automation Engineering, I specialize in robotics, automation, control systems, and 3D design. My expertise includes robotics engineering, CAD... Read more

As a passionate professional in Industrial Informatics and Automation Engineering, I specialize in robotics, automation, control systems, and 3D design. My expertise includes robotics engineering, CAD design, MATLAB simulation, Arduino programming, and image processing with OpenCV. I’ve successfully led projects, such as developing an automated chess-playing robotic arm, organizing robotics exhibitions, and solving industrial challenges with AI models and HMI interfaces. I have a solid educational foundation in discrete signals, ROS, complemented by hands-on experience in solar energy systems. Known for my technical management skills, I’ve conducted CAD-based competitions and energy optimization challenges. My dedication to continuous learning, problem-solving, and innovation sets me apart.

I’m an Electrical Engineer with a BS Electrical Engineering from NJIT and two years of RF and PCB design experience at General Motors. As a Wireless Hardware Engineer, I validate and improve cellular... Read more

I’m an Electrical Engineer with a BS Electrical Engineering from NJIT and two years of RF and PCB design experience at General Motors. As a Wireless Hardware Engineer, I validate and improve cellular transceiver modules, while also rebuilding and optimizing high‑frequency test benches. Previously, as a Design Release Engineer, I was responsible for the production of the headliner on one of GM's vehicles, mixing design validation work and issue resolution with international supply chain management. I’m skilled in MATLAB, 3D modeling, RF system analysis, PCB design for specialty applications, and collaboration across many departments. My strengths lie in RF design, system validation, and cross‑disciplinary collaboration to deliver robust, manufacturable hardware.

We embark on Electrical Electronics and Embedded Systems Design with major interest in Implementation of Power Backup systems and Sensors electronics. Key focus on all projects is reliability, cost ef... Read more

We embark on Electrical Electronics and Embedded Systems Design with major interest in Implementation of Power Backup systems and Sensors electronics. Key focus on all projects is reliability, cost effectiveness and Standards for Mass production. Some of my projects are; 1. 2.5kva to 5kva inverters with intelligent Change Over and Battery charger in one package. 2. 12V to 98V Battery charger using Pulse width modulation. 3. Keypad Entry system for Security using combination lock algorithm. 4. Automatic Farm irrigation/watering systems 5. Automatic Water tank level monitor and refilling system etc. Let's work with You. Thanks

I specialise in the following engineering softwares: FreeCAD, Blender, KiCAD, EasyEDA Pro, Proteus, Inkscape, FlatCAM,Programming Languages and Databases, Visual Basic, C, C++, Java, Python, HTML, My... Read more

I specialise in the following engineering softwares: FreeCAD, Blender, KiCAD, EasyEDA Pro, Proteus, Inkscape, FlatCAM,Programming Languages and Databases, Visual Basic, C, C++, Java, Python, HTML, MySQL databases Digital Electronics, Schematics and PCB Design I design switching power supplies, power amplifiers, motor controllers and inverters capable of powering various appliances. Using KiCAD, EasyEDA or Proteus. Can also design and program micro controllers for IoT devices using various sensors for various industrial purposes. I also design 3D CAD designs with freeCAD, Onshape and Fusion 360. For concept and practical purposes.

computer skills 1. solid works - 3D design 2. Autocad - 2D design 3. Kicad -PCB design 4. arduino coding

computer skills 1. solid works - 3D design 2. Autocad - 2D design 3. Kicad -PCB design 4. arduino coding

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

As a recent Electrical Engineering graduate, I am highly motivated to apply my academic foundation in C/C++ and PCB design to real-world projects. I offer competitive rates in exchange for the opportu... Read more

As a recent Electrical Engineering graduate, I am highly motivated to apply my academic foundation in C/C++ and PCB design to real-world projects. I offer competitive rates in exchange for the opportunity to build long-term professional relationships and a world-class portfolio. I am dedicated to precision, timely delivery, and clear communication

Proficient knowledge in AutoCAD 2D and 3D, ArchiCAD, Revit, sketchup, Fusion 360, rhino, Photoshop illustration and a sense of aesthetic that prompt me to love detailing and colouration. I have worked... Read more

Proficient knowledge in AutoCAD 2D and 3D, ArchiCAD, Revit, sketchup, Fusion 360, rhino, Photoshop illustration and a sense of aesthetic that prompt me to love detailing and colouration. I have worked on hostel apartments, restaurant, office space and numerous residential buildings from the idealization to concept generation, drafting, modelling, rendering and construction.