Hire the best freelance GAMBIT Software expert designers for your company

My name is Mohammed Abul Hassan. I have graduated at College of the North Atlantic – Qatar studying advanced diploma program in Mechanical Engineering Technology program. At present, i am pursuing Bac... Read more

My name is Mohammed Abul Hassan. I have graduated at College of the North Atlantic – Qatar studying advanced diploma program in Mechanical Engineering Technology program. At present, i am pursuing Bachelor of Science in Mechanical Engineering at Qatar University. Most people in the world have some goals in life. My aim in life is to become a mechanical design engineer. After I graduated high school, I became certain that I will pursue my higher education in mechanical engineering. The reason to study mechanical engineering is that, when I was in high school I was interested in Applied Math’s and physics. I like to apply theory which I studied in physics to solve real life problems. As a result, I have decided to study mechanical engineering. Moreover, I want interested to build hand-working skills in mechanical engineering. For this reason, I study at College of the North-Atlantic Qatar which is Canadian technical college. I have completed my advanced diploma in Mechanical Engineering Technology (industrial maintenance). In this diploma, I have learned a lot of industrial maintenance for example- reliable center maintenance, how the power plant system works, how to do maintenance in machinery equipment’s etc. Moreover, in final year I have learned how to build product from scratch. In my capstones project I build a hydraulic book lifting trolley. At first, I have done to research for the need of project. After that I calculated and design the model in 3-D software Catia V5. After finishing design I fabricated the project using college resources such as welding, fastening etc. These all techniques of fabrication I have learned in my diploma program. From this project I am interested to make career in design and manufacturing. After completion Diploma, I progressed towards B.Sc. Mechanical Engineering Degree completion at Qatar University. As a Mechanical Design Engineer, I have design and fabricated numerous projects, some of them highlighted below: -The aim of project is to design and simulate a solar powered water distillation system for rural communities in Somalia. The system consists of the evaporator, condenser, and storage tank for salty water, storage tank for distilled water, filter, pump and solar collector -The aim is to design a greenhouse that maintains the required climate to grow to tomatoes in hot and arid environments such as Qatar. The required climate includes the temperature, relative humidity, ventilation and carbon dioxide, lighting and thermal radiation, and so forth. The design is meant to meet the conditions at lower energy consumption and initial and operating cost so that to produce tomatoes that will be used for resale at a reasonable price and make profit. The design should also be reliable, have back-up systems, and be maintainable. Growing tomatoes and other crops in Qatar’s environment is important to increase food resources and production. -Aim of project describes computational and experimental investigation on the response of thin wall structures for energy absorption of car crash boxes. In this project, the tubes subjected to quasi-static axial loading. Many different cross-sectional structures have been studies to find optimal configuration for energy absorption. Initially, the Finite Element Analysis (FEA) model has been developed for different structures. From FEA model, Specific Energy Absorption (SEA) and Peak force has been estimated for different cross-sectional structures. To verify these performance parameters, quasi-static axial loading has been performed experimentally. Both foam-filled and without foam on different cross-sectional structures are implemented to study their effects on the performance parameters. The study used the aluminum alloy as a material to investigate the ability of using aluminum alloy in the energy absorption structures since the aluminum has lighter weight.

I am Mechanical Engineer. I did many projects such as building snake robot, simulation of the wind turbine, simulation of the journal bearing and so on. I can design and model any things by CATIA and... Read more

I am Mechanical Engineer. I did many projects such as building snake robot, simulation of the wind turbine, simulation of the journal bearing and so on. I can design and model any things by CATIA and SolidWorks. We can have a good collaboration and build the world! Please contact me. Best

I'm a mechanical engineer with a strong background in thermal-fluid systems, specializing in the design of ventilation systems for large-scale infrastructure as well as microscale heat transfer phenom... Read more

I'm a mechanical engineer with a strong background in thermal-fluid systems, specializing in the design of ventilation systems for large-scale infrastructure as well as microscale heat transfer phenomena in advanced cooling technologies. I led the conceptual and basic design of normal and emergency ventilation systems for a 16-station underground metro, applying NFPA codes, manual calculations, SES simulations, and CFD modeling. I’ve designed ducting systems, selected ventilation equipment, and coordinated complex layouts for various station zones like platforms, ticket halls, and technical rooms (TPS/LPS). In parallel, I work on cutting-edge thermal research, focused on improving heat pipe performance through thin-film evaporation studies, topology optimization, and the use of innovative materials. I’m also part of the REVIVE Project, investigating spray forming techniques to enhance production efficiency in the steel industry. Whether you're looking for a hands-on engineer to design robust HVAC systems or a researcher to optimize thermal performance at the microscale — I bring technical depth, precision, and a problem-solving mindset to every project.

A hard-working, versatile and highly motivated professional engineer with a track record in Technical Sales , Application Engineering Support , Engineering design and Analysis within in a Sealing Engi... Read more

A hard-working, versatile and highly motivated professional engineer with a track record in Technical Sales , Application Engineering Support , Engineering design and Analysis within in a Sealing Engineering environment . Associate Member of the Institute of Mechanical Engineers (AMIMechE).

Professional and experienced with more than three years of experience in different fields of mechanical engineering and a solid background in designing, problem-solving and proposing a creative soluti... Read more

Professional and experienced with more than three years of experience in different fields of mechanical engineering and a solid background in designing, problem-solving and proposing a creative solution, high social and teamwork skills, able to manage the different project at the same time, interested in management and leading.

I am a final year Civil engineering undergraduate with experience in CFD modeling using ANSYS GAMBIT and CFD Simulation Using ANSYS FLUENT. I have 3 years of experience in CFD analysis of wind load ac... Read more

I am a final year Civil engineering undergraduate with experience in CFD modeling using ANSYS GAMBIT and CFD Simulation Using ANSYS FLUENT. I have 3 years of experience in CFD analysis of wind load acting on buildings and roof-mounted objects. Also, I did my research under the topic of "Effects of different roof shapes on wind loads acting on roof-mounted water tank"

a professional mechanical engineer in CaD/ Cam, FEM, MBD, CFD

a professional mechanical engineer in CaD/ Cam, FEM, MBD, CFD

I’m an old school draftsman/designer who started out doing everything in pencil and pen on a drafting table. My 30+ year career spans the gambit from cartography and geographic information systems to... Read more

I’m an old school draftsman/designer who started out doing everything in pencil and pen on a drafting table. My 30+ year career spans the gambit from cartography and geographic information systems to furniture design (my first love) and cabinet making. I have experience in a wide variety of software from ESRI ArcMap to Solid Edge PLM software. I am eager to work with you on your design and CAD projects.

I’m an Aerospace Technocrat, currently pursuing my Master’s degree in Aerospace Technology in MIT Anna University Chennai, Tamil Nadu, India with a CGPA of 7.6/10. Currently doing my final year projec... Read more

I’m an Aerospace Technocrat, currently pursuing my Master’s degree in Aerospace Technology in MIT Anna University Chennai, Tamil Nadu, India with a CGPA of 7.6/10. Currently doing my final year project in “ Numerical analysis on the effect of V Tab and Multiple Delta Tab in subsonic Mach Number”. Will be graduating in Master Degree by end of July 2020. I graduated with a bachelor’s degree in Aerospace Engineering from SASTRA Deemed To Be University, Thanjavur, Tamil Nadu, India with a CGPA of 7/10 on May 2018. I have actively participated in the flight designing competition SAE Aero India Southern Division Design Competition 2017 & 2019 and DRDO Robotics competition - DRUSE 2018. I am the lead originator, content essayist and the group pioneer for the previously mentioned rivalry. My zone of premium is aerodynamics, designing, propulsion and structures. I have learned and have experience in software like Fusion 360 and Pro-E and familiar with Ansys Workbench Gambit & Fluent CATIA and Auto CAD. I am knowledgeable about MS Office. Exhibited notice/poster in Zonal Level DRDO DRUSE Rivalry 2018 on " Air Ambulance Vehicle Automaton for Casualty Evacuation. Published a research paper in a journal entitled " AIR AMBULANCE DRONE - A MODERN CONCEPTUAL AERIAL VEHICLE FOR SURVEILLANCE AND CASUALTY EVACUATION " in INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH AND DEVELOPMENT (IJMPERD); ISSN (ONLINE): 2249-8001; ISSN (PRINT): 2249-6890; VOL - 9, ISSUE - 4; EDITION: AUG-2019 ". I am fluent in English. I have also learnt languages like French, German, Hindi. Member of a design team have drawn a design for many research works. I am a dynamic individual in the online networking stage like Linked-In and Facebook.

Am that good guy every one would like to work with. I like team work. Am fascinated by challenges presented to me and always eager to solve them, No backing down until it is done correctly, that is w... Read more

Am that good guy every one would like to work with. I like team work. Am fascinated by challenges presented to me and always eager to solve them, No backing down until it is done correctly, that is who I am.

More than 30 years designing and manufacturing test prototypes of printed circuit boards, as well as large series manufacturing. My professional experience includes managing several production depa... Read more

More than 30 years designing and manufacturing test prototypes of printed circuit boards, as well as large series manufacturing. My professional experience includes managing several production departments, supporting the R&D department, industrial electronic technician and electronic assembler. This Knowledge and acquired skills are essential for efficiently and effectively design a 3D printed circuit board. Do you want to know more about my work? Please visit 3dpcb.es

I’m an architect specialized in both interior and exterior 3D design. I use 3ds Max and Corona Renderer to create high-quality, realistic visuals. Let’s turn your ideas into stunning images — on time,... Read more

I’m an architect specialized in both interior and exterior 3D design. I use 3ds Max and Corona Renderer to create high-quality, realistic visuals. Let’s turn your ideas into stunning images — on time, and with care.

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills... Read more

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills and knowledge of physics and CAD software and continue to learn about the industry. I have plenty of experience with SolidWorks, which I use as my main tool, but can easily adapt to any software. I am a fast learner, quick on my feet and always willing to go the extra mile. My friendly, open attitude was greatly appreciated by my superiors and colleagues in my previous roles. When I’m not on the job, I enjoy hiking, camping and spending time creating custom pc builds.

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawing... Read more

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawings, preliminary layouts, P&IDs, and more. My expertise is in rotating equipment, specifically centrifugal pumps, vacuum pumps, and compressors from 1.5 HP (1 kW) to upwards of 1,000 HP (750 kW). I have also had experience in other pneumatic applications as well as office furniture design. I have designed piping runs (including valves, gauges, transmitters, other instrumentation), structural steel frames, gear reducers, V-Belt driven equipment, selected motors, designed for adherence to stringent specifications, and communicate regularly directly with customers. I am finishing my Bachelor's degree in Mechanical Engineering Technology and will continue to pursue my MBA after that. I am offering services in Solidworks 2019 (2D & 3D) and Draftsight (2D) and can save files in any of the supported formats (i.e. .SLDPRT, .SLDASM, .SLDDRW, .STEP, .DWG, etc.) If you are looking for a quick layout, concept, or have a small part that needs to be modeled in 3D I can make that happen. If you need a full blown design with detailed 2D drawings I can make that happen as well. I oversee my projects from start to completion!

I am a Certified Mechanical engineer with a Master's in Naval architecture and marine engineering. I can offer you services like: - mechanical designs and calculations - product design and 3d modeling... Read more

I am a Certified Mechanical engineer with a Master's in Naval architecture and marine engineering. I can offer you services like: - mechanical designs and calculations - product design and 3d modeling - ship design -structural design - CFD -FEA my best projects - complete the design of the duckweed field with all the calculations needed. - design an ROV ( remotely operated underwater vehicle) - I made a design of the gearbox with its equations - I made a design for a manufacturing JIG - series 62 ship design Best regards Ahmed Abdelhady

I am Passionate mechanical engineer/industrial designer who wish to work more in the industrial design world. Won National champion in 3D modeling 2015/2016. Certified SolidWorks Professional (CS... Read more

I am Passionate mechanical engineer/industrial designer who wish to work more in the industrial design world. Won National champion in 3D modeling 2015/2016. Certified SolidWorks Professional (CSWP).

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manuf... Read more

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manufacturable product that meets their specific goal. Based on your needs, you may choose from any number of the following services: - Concept Development - 3D Modeling & Rendering - Mechanical Analysis - Drawings & Documentation - Fabrication Sourcing - Consulting Certifications: Bachelor of Science in Mechanical Engineering - Valparaiso University, 2011 Certified SolidWorks Professional

London-based designer and engineer currently undertaking a double masters in Innovation Design Engineering at the Royal College of Art and Imperial College London (MA+MSc).

London-based designer and engineer currently undertaking a double masters in Innovation Design Engineering at the Royal College of Art and Imperial College London (MA+MSc).

3D&2DDESIGNING SKILLS DEVELOPING CONCEPT & ANALYSIS MATERIAL KNOWLEDGE TO CHOOSE THE PRODUCT MATERIAL ENGINEERING CALCULATION

3D&2DDESIGNING SKILLS DEVELOPING CONCEPT & ANALYSIS MATERIAL KNOWLEDGE TO CHOOSE THE PRODUCT MATERIAL ENGINEERING CALCULATION

I'm alireza and i'm here to make a lots of amazing project with you guys. I know how to work and i will do my best to make well project for you

I'm alireza and i'm here to make a lots of amazing project with you guys. I know how to work and i will do my best to make well project for you

I believe the solution for each problem lies in the nature, the design of almighty. For any thing i design there will be a reason, i don't believe in just replication. I am learning designing by re... Read more

I believe the solution for each problem lies in the nature, the design of almighty. For any thing i design there will be a reason, i don't believe in just replication. I am learning designing by redrawing the existing components and finding, the decisions they made in designing that components.