Hire the best Acoustics Engineering experts for your company

I can create anything from sketching to fully rendered 3D models. Read more

I can create anything from sketching to fully rendered 3D models.

10+ years 2D-3D Mechanical Design and Rendering, Multiphysics Simulations, Programming Language, Electronic PCB Layout, Acoustic solutions. Read more

10+ years 2D-3D Mechanical Design and Rendering, Multiphysics Simulations, Programming Language, Electronic PCB Layout, Acoustic solutions.

Aerospace Engineering Graduate student. Experience with computer simulation in diverse engineering disciplines: -Finite Element Analysis (FEA): Linear and Non-Linear Modelling. Structural, fatigue... Read more

Aerospace Engineering Graduate student. Experience with computer simulation in diverse engineering disciplines: -Finite Element Analysis (FEA): Linear and Non-Linear Modelling. Structural, fatigue and modal analysis. Ansys, Solidworks, Inventor, NX Nastran. -Computational fluid dynamics (CFD): Transient and turbulent flows. Room ventilation, aerodynamic and thermal study, pollutant propagation and control, multiphysics. -Acoustic analysis: Indoor and Outdoor noise propagation and control. Industrial noise allotment. Soundproofing recommendations. -2D and 3D drawing: Autodesk Inventor, SOLIDWORKS, SketchUp, AutoCAD -Electrical analysis: Power flow, short circuit study, ground grid design, power factor correction, harmonics study, LV and MV electrical installations, one-line diagrams. I can also offer English to Spanish translation services (note: I am NOT an official translator). BSc. in Mechanical engineering with minor in Electrical Engineering (ABET accreditation).

• (2017) Maquiriegos Esagar, Caracas, Venezuela. Position: Services Engineer. Experience: design, installation and maintenance of irrigation systems. • (2016) Design and construction of a prototy... Read more

• (2017) Maquiriegos Esagar, Caracas, Venezuela. Position: Services Engineer. Experience: design, installation and maintenance of irrigation systems. • (2016) Design and construction of a prototype for the transport of objects needed during trips by bike, Caracas, Venezuela. Results: prototype of the structure of a multifunctional trailer for bikes. • (2015) Improvements of food dehydrators for the community of El Paují, Bolívar state, Venezuela. Experience: design of a food dehydrator using solar energy. • (2015) Recicrear, Caracas, Venezuela. Experience: design and construction of wallets from recycled material. • (2014) Direactores, Caracas, Venezuela. Experience: design and construction of props for performances from recycled material.

• Ability of making things “From being nothing to everything”. • Currently working as a Senior Design Engineer with 8 years of experience in Solid works Design for Acoustic Enclosure Export Design &... Read more

• Ability of making things “From being nothing to everything”. • Currently working as a Senior Design Engineer with 8 years of experience in Solid works Design for Acoustic Enclosure Export Design & Development, Structural Drawing, bending drawing, Control Panel, Spiral Ducting (Fresh & Hot Air), Sheet Metal Components. • Focused & goal driven with strong work ethics, continuously striving for improvement. • Adaptable and a quick learner with skill to work under pressure. • Possesses strong negotiation, & analytical skills. • An out-of-the-box thinker with sound Solid works knowledge and thorough understanding of design dynamics. • Creativity in designing work. • Sheet Metal Cutting Programming in Metalix Cnckad, Auto-Nest for Amada Machine • Preparation of Acoustic Enclosure drawing for given genset, development drawing And bending drawing from enclosure drawing. • Engine mounting base frame & Acoustic Enclosure for 10 kva To 1000 Kva. For Ashok Leyland, Cummins, Deutz, Perkins & Cooper Engines for Domestic and Exports. • Design & Development of Turnkey projects. • 125 KVA Cummins Engine Base Frame with Acoustic Enclosure Design & Structural Drawing for – Railway Project. • Mobile Power Source like 2x70 . 4x125 KVA, Containerized and Mounted on Tatra Chassis with removable Acoustic Enclosure Design & Development For – Defense Application Projects.

Expertise in design for rapid prototyping technologies: 3D printing, laser cutting, CNC machining. Expertise in designing for manufacturing. Read more

Expertise in design for rapid prototyping technologies: 3D printing, laser cutting, CNC machining. Expertise in designing for manufacturing.

I'm a constructional engineer specialized in acoustical engineering. In 2014, I graduated Magna cum laude at the Engineering Department at the University of Antwerp. I was awarded Summa cum laude for... Read more

I'm a constructional engineer specialized in acoustical engineering. In 2014, I graduated Magna cum laude at the Engineering Department at the University of Antwerp. I was awarded Summa cum laude for my master's thesis, which was developed under the supervision of the world-renowned acoustical consulting company Kahle Acoustics. For the past couple of years, I have been working as a freelance acoustical consultant for different clients in Belgium. As well I did work at KU Leuven, one of Belgium's and Europe's top universities, ranked within top 50 universities in the world. Right now I'm seeing to expand my working field, since I discovered the joy of nomadic and freelance work. Get in touch with me if you wish to have any problems solved within the field of acoustics, architecture, construction and CAD.

Running Brook Design is a professional recording studio and home theater design service with many successful designs completed for people and organizations all around the world. We will work closely w... Read more

Running Brook Design is a professional recording studio and home theater design service with many successful designs completed for people and organizations all around the world. We will work closely with you through interactive reviews on proposed design ideas and then we create a set of high-quality documentation that ensures a thorough understanding of the critical design elements needed to properly construct your facility. Whether you are looking for a complete facility with high isolation, or just acoustical treatment design for an existing space, we can help you to get the most out of your investment. We invite contractors, architects, interior designers, and other professionals, seeking to provide top-quality acoustic design for their clients, to contact us to discuss your needs.

I'm an Mechanical Engineer having experience on working as design engineer on Acoustic designs and Oil and Gas Industry Read more

I'm an Mechanical Engineer having experience on working as design engineer on Acoustic designs and Oil and Gas Industry

Living in a world of 3D Modelling and Engineering, always ready to take up new opportunities and challenges. Got an equal share of theoretical and practical experience in designing and fabrication. Read more

Living in a world of 3D Modelling and Engineering, always ready to take up new opportunities and challenges. Got an equal share of theoretical and practical experience in designing and fabrication.

Independent contractor offering product design and mechanical engineering services. Creative, self-starting, and driven with 11 years of experience in both industry and research. Strength in product d... Read more

Independent contractor offering product design and mechanical engineering services. Creative, self-starting, and driven with 11 years of experience in both industry and research. Strength in product design from concept to production including overseas manufacturing, system modeling and simulation, prototyping, design for manufacturing, and statistical process control. Versed in the product development cycle, machine design, prototyping to bridge to high volume manufacturing, 3D printing, printing, energy harvesting, CAD, 3D scanning, acoustics, mechatronics. Enthusiastic drive for quality, efficiency, and innovation.

From the design and manufacture of small industrial parts to the large company, using FEA and CFD based simulation, assisting companies from different sector and their design team to develop higher pe... Read more

From the design and manufacture of small industrial parts to the large company, using FEA and CFD based simulation, assisting companies from different sector and their design team to develop higher performing, safer and lower cost parts. Through the application of simulation technology and consulting services, I try to support Industry to solve complex engineering challenges and mitigate environmental risks including structural, hydrodynamics, vibro-acoustics, thermal and fatigue. With rich experience in computer modeling of structures and the application of linear and non-linear (implicit and explicit) finite element codes and using advanced CFD tools in coupled with FEA to precise and real-time modeling of complicated structures that experience FSI for a wide range of engineering problems, I help industrial and educational parts to overcome any problem with any level of complexity. I have experienced with this CFD and FEA Packages: 1- Ansys 2- Abaqus 3- Ls-dyna 4- Comsol 5- Siemens Star-ccm+ 6- Ansys Fluent Programming: 1- Matlab 2- Fortran 3- C++ 4- Python

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d. Read more

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am b.tech mechanical 3rd year student in dayalbagh Educational Institute. Presently i have done the advance level certification course in autocad and also persuing fusion 360 software course present... Read more

I am b.tech mechanical 3rd year student in dayalbagh Educational Institute. Presently i have done the advance level certification course in autocad and also persuing fusion 360 software course presently. I am hard working and workaholic person

We are group of graduated and experienced in mechanical engineering additionally have consummated experience in Industrial desgin from last 2 years and also have have Freelancing experience of 3 ye... Read more

We are group of graduated and experienced in mechanical engineering additionally have consummated experience in Industrial desgin from last 2 years and also have have Freelancing experience of 3 year.

I am a Certified PTC Creo and ANSYS professional and I am working as Mechanical Design Engineer since past 2 years. I have completed more than 20 Projects in last 2 years and still counting. I can ass... Read more

I am a Certified PTC Creo and ANSYS professional and I am working as Mechanical Design Engineer since past 2 years. I have completed more than 20 Projects in last 2 years and still counting. I can assure you about the quality of my work. I am available 24x7 and can discuss in any time zones with the perfect communication.

Certified Solidworks Expert (CSWE) Product Design and Manufacturing 20 Years of Electro-Mechanical, Industrial and Medical Device Design Read more

Certified Solidworks Expert (CSWE) Product Design and Manufacturing 20 Years of Electro-Mechanical, Industrial and Medical Device Design

Greetings, My name is Muhammad Abdullah Ahmed and I am a Professional 3D Designer who can deliver quality work. I am currently a student of Mechanical engineering and I like to design and simulate st... Read more

Greetings, My name is Muhammad Abdullah Ahmed and I am a Professional 3D Designer who can deliver quality work. I am currently a student of Mechanical engineering and I like to design and simulate stuff. I can perform 3D modeling and Analysis like CFD and FEA Using various modeling and simulation software.

Greeting Cad Crowd Family! My name is Ishtiaq. An experienced & competent mechanical engineer with strong skills in MEP & HVAC systems designing and drafting. Proficient in CAD/CAE software and colla... Read more

Greeting Cad Crowd Family! My name is Ishtiaq. An experienced & competent mechanical engineer with strong skills in MEP & HVAC systems designing and drafting. Proficient in CAD/CAE software and collaborating with cross-functional clients. If you are seeking a curious and result oriented individual, let's get in contact. Thanks and Best Regards ISHTIAQ

I am a mechanical engineer working in design via Solidworks I design more products like gears, turbines, fans, Automotive parts I have experience in 2D sketch, parts, assembly, sheet metal, welding,... Read more

I am a mechanical engineer working in design via Solidworks I design more products like gears, turbines, fans, Automotive parts I have experience in 2D sketch, parts, assembly, sheet metal, welding, simulation I have experience in MEP (HVAC, firefighting and plumbing) Excellent in dealing with programs such as (AutoCAD, Revit, HAP)

Pure-Mechatronics commenced operations in 2017. From a beginning of design, build and conduction of solar panel structures and factory related mechanical engineering design, troubleshooting and projec... Read more

Pure-Mechatronics commenced operations in 2017. From a beginning of design, build and conduction of solar panel structures and factory related mechanical engineering design, troubleshooting and project leading services, we have grown to have a broad base offering in electro-mechanical engineering services to companies and individuals in both regional and city based locations. We are eager to work with you.

Hello everyone I am a 2017 pass out mechanical engineer. I took my cad training from a training provider called CAD O CAM. I learned Auto Cad and Pro E from CAD O CAM. I learned solid works from you... Read more

Hello everyone I am a 2017 pass out mechanical engineer. I took my cad training from a training provider called CAD O CAM. I learned Auto Cad and Pro E from CAD O CAM. I learned solid works from you tube videos and also took help from my friend. I have completed several projects on solid works within a given time limit. I provide Quality with speed and accuracy in my Design projects, I will be looking forward to hear from your side.

Hai I am Nagavardhan Reddy I have been working on Tool Design and sheet metal Automotive Parts, Surface Panel Parts etc since 2011; I have experience on CatiaV5, UGNX6 Software's.... Read more

Hai I am Nagavardhan Reddy I have been working on Tool Design and sheet metal Automotive Parts, Surface Panel Parts etc since 2011; I have experience on CatiaV5, UGNX6 Software's. If there is any project regarding my profile, please let me know. Please feel free to call me at 09441187223 or send an email to ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ I look forward to speaking with you

I'm a qualified Mechanical Engineer having expertise in mechanism designing, product designing and 3D Modeling. I love to bring sketches into reality. Being an engineer, my designs are ready to manufa... Read more

I'm a qualified Mechanical Engineer having expertise in mechanism designing, product designing and 3D Modeling. I love to bring sketches into reality. Being an engineer, my designs are ready to manufacture and all manufacturing limitations are taken into considerations. I worked on various kinds of projects from small medical devices to as large as autonomous drones. I have worked with several international clients and companies. Working on SolidWorks is like a hobby for me :)

I am a product design engineer and very good at concept creation, design for manufacturing, sustainability, and convenient design. By Qualifications I am a Mechanical design engineer who graduated in... Read more

I am a product design engineer and very good at concept creation, design for manufacturing, sustainability, and convenient design. By Qualifications I am a Mechanical design engineer who graduated in 2014. I have total 7 years of experience in design, development and product life cycle, Here is my recent solidworks project. https://drive.google.com/file/d/15WQ8x7GsCMpMD0aoachYgJdXoE-OkOTD/view?usp=drive_link