Money Storage Bank Bins for Kids

in Consumer Products held by Preparakit
Contest Closed
Description:
Hi, I am looking for some design ideas for a money storage bank bin for kids. It's a different twist to the traditional piggy banks. I will eventually need to create a 3D CAD of this so that I can create a prototype for it. It will need to have 3 bins designated with 1) Save 2) Spend 3) Share. I envision the approx size of the container to be 5x7x2, clear, that opens up with an attached lid, and on the outside, will be a ledger where it will be used to track withdrawls and deposits. These 3 containers will then need to be placed into a larger single container. Easy for kids to open, close and carry.
Wants:
Be different from what is already out there, looking for appealing yet still functional designs that matches the description details.
Don't Wants:
traditional piggy bank shapes. I have attached images of some competitors products to use as a reference only, not to copy.

Entries

#21 Storage Sink Bank by Sumo Submit
This bank concept has three color-coded compartments for Save, Spend, and Share within a see-through container.
Each compartments are spring-held so that they vertically sink correspondingly to the amount of coins inserted, serving as a more visceral 'ledger'.
The kids can make their own decision for which color meaning which, and see and feel the accumulation in each compartment as feedback from their financial decisions.
more
Jan 7, 2020 8:45
#20 Money Saver by Manikandarajan
this is a simple money saver design, i hope this will satisfy all of your needs..
more
Jan 6, 2020 13:01
#19 MONEY SAVER by Manikandarajan
This is a simple design , which may meet all of your requirements.
more
Jan 5, 2020 12:54
#17 Money storage bank bins for kids.rev0 by Michael Dimou
This is my first design for this challenge. Please find the attached presentation ( Money storage bank bins for kids.pptx). I wish good luck to you and overall to the rest participants.
more
Jan 2, 2020 12:08
#16 Money storage by Jose Carlos Lpez
This design focus in the portability for the money storage unit, thinking this would probably be carried by the mom in her purse,but appealing to the children. This design don´t take much space and not have strange shapes that can be a problem. In the middle is a hole to store also a pen, a marker or a pencil to keep track of the amount of money.
Any other question you can contact me.
Best regards
more
Jan 1, 2020 23:23
#15 money storage bank bins for kids by wali007d
hi Mr buyer:
here is it! my design for your project of money storage bank. I hope you like it and if there's any question don't hesitate to ask.
more
Jan 1, 2020 13:02
#14 Money Storage Bank Bins for Kids educations by Ahmad Arif
have two locked
more
Dec 31, 2019 16:52
#13 Money Storage Bank Bins for Kids educations by Ahmad Arif
- easy to carry
-have key
-design simple
-easy to open all
more
Dec 31, 2019 16:23
#12 Money Storage Bank For Kids by Ashok Pundpal
- Simple and Handy Design,
- Made 3 stepped Compartments design, so Kids Can add extra money in save Compartment.,
- 3 Sliding Door for each compartment with lock arrangement,
- Material of Door is Glass so you can see how much money stored in it,
- Also Added Typical Emojis for each compartment,
- Added Colors and Emojis only for Aesthetics point of view,
Hope you will happy,,
Have a nice day....!
more
Dec 31, 2019 12:22
#11 Money Storage Bank Bins for Kids by Xanely Dsouza
A simple design with 3 compartments viz Save, Spend and Share. The Middle Compartment is divided into 2 pieces. To withdraw money just separate the compartment required. When all 3 compartments are assembled via snap fit it becomes one single cylinder, easy to carry around.
more
Dec 31, 2019 9:57
#10 Money Storage Bank Bins for Kids by Saravanakumar8394
As you expect, I have submitted a new design idea on Money Storage Bank Bins for Kids. It has 3 containers (Save, Share and Spend) designed to be placed inside a large single container. Bottom of the containers have a sliding door to withdraw money. Scroller in the front of containers can be used to display the amount inside it. A simple ledger is attached at backside of bin. Amount dis-player and ledger can be protected by transparent material, if required. Prototype can be developed with help of 3D printing. If any improvisation is required, let me know.
Thank you.
more
Dec 31, 2019 9:42
#9 Master stp by Dave-m.e.
My design features a simple 3 compartments and 2 components to be produced. My design is intended to be plastic injection molded and was designed with simplicity in mind. This design is a working concept and other features can be integrated such as latches and text on the lid. I think this will work great with a hard tpu clear or slightly colored.
The main advantage for my design is simple mold tooling and only two molds are required which will save on upfront investment costs.
more
Dec 30, 2019 15:44
#8 Money Storage Bank For Kids by Raza Imam
A unique and functional design for the money bank for kids that fully meets all the requirements. This design allows kids to rotate suitable compartment and withdraw or deposit their amount easily, and track their withdrawals and deposits on the ledger placed on a side of the outer body. A handle on the top helps to rotate the container and long handle helps to carry the bank. Lid of the containers can be lock, or stick by the magnets. The approx size of the bank is 5-6 inches Width, and 8 inch height. The mechanism has shown in the animations, if you would like, I can also provide you with the assembly animation, along with it's BOM & BOQ and technical drawings as well. The material used is plastic with 2mm thickness. So if you would like, I can also provide you with 3D printable files. or you can also design mold for plastic molding.
more
Dec 30, 2019 14:57
#7 modular coin box by Mitch Pflederer
This design allows for stacking more than one box by sliding another box onto others in the stack. Money is accessed by sliding the box out revealing the opening in the top of each box. The user can isolate and remove a single box, attach the handle, and carry it to where ever they would like to go. ex: "spend" box to the store, "save" box to the bank, or "share" box to a charity event, ect.
The benefit of this modular design is that all the boxes are identical and if you have a buyer that wants to further divide their funds, maybe for specific purchases, they can, by acquiring more boxes.
all of these components can be 3d printed
for high production the center box can be extruded and then 3 axis milled, the end pieces glued in place or a molding house can design the end pieces to snap fit. the handle can be injection molded with only one slide which will lower cost of the mold.
more
Dec 30, 2019 5:52
#4 Money Storage Bank Bins for Kids by REDA
;)
more
Dec 29, 2019 19:22
#3 Triangular by Edy
Great triangular bank that can be separate simply by pulling up the boxes. Great for kids.
more
Dec 29, 2019 18:34
#1 HONEY BEE BANK by ROCKY17
HONEY BEE BANK is a friendly bank to a child that have a 3 stage of storage that made with compatible and practice instrument and material element. It shape base on hexagonal shape to make a maximum effective and efficiency space function. The Size of each hexagonal space can change based on the amount of money in it. It can be fold to be 2D shape and very easy to use and carry. The right and left side has 12 side that can be use as a pledger thath can contain a different division of data.
Each color of hexagonal space can be replace or colour by the crayon or other paint tools that can be done by the child self. The sequence of each division Spend,save,share can be rearrange to be another configuration and can be add by another hexagonal space.
THANKYOU
more
Dec 29, 2019 3:57

Discussion

Preparakit

Buyer

Fri, 10 Jan 2020 19:47:44 +0000
@Mitch I'm sorry you feel that way. If my instructions were so clear, then I'm really surprised that neither one of the submissions were designed fully as specified. Especially the last sentence I had in my description of it needing to be enclosed in a larger single container. I will amend my comment about support and agree that they did respond but for some reason, I did not see it when it was sent on 12/30 so had to reach out to them again today. This will also be the last time I use a service like this.

Mitch Pflederer

Designer

Fri, 10 Jan 2020 18:37:56 +0000
you realize that there is hundreds of hours of man hours dumped into this surprisingly clearly laid out job combined by everyone who submitted. I suppose it’s our fault for working on something that wasn’t escrowed.. won’t happen again. Ps. I have been on here for less than a month and I already know that support is pretty much instant in their response time...

Preparakit

Buyer

Fri, 10 Jan 2020 18:21:29 +0000
Hello All. I have to apologize because I went into this not knowing what I really wanted the final result to be like. I had an idea of it but apparently it's not clear enough. None of the designs submitted so far is what I am looking for unfortunately. It's my first time using a platform like this and I think it's better for me to convey what I want in a 1:1 conversation with someone instead and get some more guidance around creating something like this from scratch. Again, I am sorry for not communicating this well enough and appreciate the designs that were submitted. I tried to cancel this earlier on but wasn't able to. I was just informed by support that this public comment was what I needed to do.
Fri, 10 Jan 2020 09:54:43 +0000
Hello,
the size given "5x7x2" is it in inch or centimeter ?
Mon, 06 Jan 2020 14:02:27 +0000
5x7x2, what is the unit ?, it is for overall size ?
Mon, 30 Dec 2019 06:58:44 +0000
Hello marcial,

You copied my comment haha... Anyways ok.. good luck
Mon, 30 Dec 2019 04:26:24 +0000
Dear buyer,

Please make this contest into blind mode..so it's safe for designs of each one.. also to prepaid... Thank you..
Mon, 30 Dec 2019 04:02:20 +0000
is each container should be 5x7x2 this much or overall size?

Mitch Pflederer

Designer

Sun, 29 Dec 2019 01:23:07 +0000
I think it’s mostly to teach them budgeting and planing along with bookkeeping
Sat, 28 Dec 2019 23:48:02 +0000
Call me crazy or perhaps miserly but I don't understand the concept. The box design is easy conceptually, though the plastic moulding design will be a big project. It's the educational concepts I find odd. What is the kid learning? Do people give their kid 3 coins so that the kid puts one in each box? I'm more familiar with the single bank (hoarded from coins under the couch or whatever) that builds up and then the kid gets to use it as they see fit. I guess it's important to teach giving away some (sharing?)

Mitch Pflederer

Designer

Sat, 28 Dec 2019 16:53:44 +0000
also i am a bit confused on the scope of this. do you simply want a design concept or an actual 3d model?
Sat, 28 Dec 2019 09:38:48 +0000
Dear buyer,

Please make this contest into blind mode..so it's safe for designs of each one.. also to prepaid... Thank you...

Preparakit

Buyer

Sat, 28 Dec 2019 08:08:09 +0000
Unless we can get what we need via just 3D printing

Preparakit

Buyer

Sat, 28 Dec 2019 08:02:55 +0000
Yes we will need to ultimately create a prototype for this.

Mitch Pflederer

Designer

Sat, 28 Dec 2019 07:15:48 +0000
do you intend to get this injection molded?

Similar Contests on Cad Crowd

Hair lifting scalp aerating design
Thank you for taking on this design challenge! We are looking to create a piece that can slide into the hair and separate it creating more airflow for scalp health and preventing hat head. Imagine a product milimeters high that slides in like a head band, ideally it would lift hair and sort it to prevent bacterial growth, sweat and flat hair. It should also be able to take on some of the weight of the hat or scarf worn so the hair wont be crushed. ( I had made a headband out of pipe cleaners and this did great to distribute the weight of my scarf and not crush my hair totally but it was not ideal and there was no breathability for the scalp as the hair just laid flat. I imagine some sort of geometric design mixed with the right material that will stay on the head without the need for too many clips. The material needs to allow for antimicrobial properties as well as breathability as it will hold the hair in place, and when hat or head covering is removed, the hair will be voluminous and not crushed or flattened. I know nothing like this exists, but the purpose of the product design is to maintain hair health health/ cleanliness and volume under coverings. Ideas that entertain for material, design, structure and air flow will be asked to prototype in a second design challenge.
Bluu20 "Pump It Up" Soap Bottle Design Contest
Be a part of History! With the outbreak of Coronavirus, hand washing has become an imperative daily routine to help prevent the spread of this disease. A 12 year old inventor and entrepreneur has formulated a revolutionary soap-like disinfectant to help curb the spread of Covid-19. Now, she is looking for an innovative bottle designer to help her design a unique bottle that compliments the new product line and provides added value and safety. THE CHALLENGE: Design a Fresh, Original and Safer Soap Bottle for this new cutting edge product! There are many soaps on the market – So, make your Soap Bottle Design stand out and drive sales! The design must address the growing concerns with sanitation and hygiene. This challenge focuses on creativity, originality and design. Winner will not only receive Prize Money!!!! If your bottle is selected, as our winner you will be part of history, receiving design recognition in our extensive media campaign, including a featured video spot. (This part of the prize is optional. So, if you’re camera shy we totally get it.) Technical Requirements : Must hold 7.5 fl Oz (preferred size) to maximum 12 fl oz. Not a must, but standard soap pump ‘engine’ makes it easier to reach target costs (Standard “Pump” Product file included for your consideration) Must be able to be mass produced. Must contemplate space for required manufacturing labels. Entry must include: 

 Please submit your design entry with images, a Neutral File Format (.igs, .stp, .fbx, .obj, .x3d, etc.) and a native file format if applicable (SolidWorks, Inventor, CATIA, Creo, NX, 3ds max, etc.). 
 Rendering of your design preferred 2D drawings for design patent Calculations for soap capacity
Smart display screens to be placed around the house
We need your help with developing a small screen (Oled) that will be used for displaying messages and information. The small screens will be used all over the house and need to be able (with different cradles or other solutions…) to be attached to cabinets (kitchen, laundry room, garage...etc) hang on walls, and stand on flat surface such as kitchen counter, table etc. More details of what needed as follow: Screens need to be either slided into different cradles for example: * A cradle with mini suction cups so it can be attached to flat surface such as kitchen’s cabinets. (Fig. A) * A stand cradle like different smartphone cases have so it can stand on flat surface such as kitchen counter, table etc. (See Fig. B) * A cradle to be hang on walls like a small picture, or using a magnet like this https://www.kickstarter.com/projects/studioproper/wallee-m-modular-magnetic-phone-mounting-system * A cradle with electric plug so it can be plugged into an outlet (On a kitchen counter etc.) and continue functioning while being charged https://www.prong.com (See also Fig. C) Or a better and prefered solution will be a design of a screen with all of the above (or as many options as possible). Like this idea for example http://www.weaseleasel.com/, but with the above options. Or some kind of a combination with this concept https://www.kickstarter.com/projects/oona/the-oona-whatever-you-need-it-to-be?ref=card *Screen need to be able to be attached/stand/hang both vertically and horizontally
Am I Safe to Get a Haircut
In the coming months as US businesses open up, this does not guarantee people will come. We are seeing this in some of the EU countries. The streets are still close to empty. Small one-on-one businesses need a way to “demonstrate” to their customers that they will be “safe”. When you turn it on, this “box on wheels” will make the small room “negative” with respect to the other rooms or WRT the hallway. This guarantees that anything bad in that room stays in that room. It does this because inside is a small blower. The inlet of the blower is “in the room” and the outlet of the blower goes out the window This causes the room to “go negative” WRT adjacent rooms or hallway. If you were to put a small string under the door, you would see the string being “pulled into the room”. This “box on wheels” also filters the air that passes thru it using a HEPA filter. Then a small UV lamp is trained on this HEPA filter and the UV light kills the virus.
Baby Spoon
I need a baby spoon that keeps the food closed inside the spoon so that it doesn't spill or open until the baby is ready to eat. Most of the time he is not ready to swallow the food. When he is pressured into eating, he has learned to swing at the spoon and knock down the food on the spoon. This spoon mechanical design will only open open a parent pressing a button for the spoon to open.