Shower Brush DesignBlind

in Consumer Products held by mafia17
TIME REMAINING: 25 days, 2 hours
  • Open
  • Choosing Finalist
  • Ended
Description:
Looking for help refining the design of our soap dispensing silicone shower brush
1. The design should be ergonomic and handled
2. The design should allow for filling, refilling, storage, and dispensing of liquid soap without leaking while not in use
3. The design should dispense soap on demand
4. The device should be able to be stored in shower independently (suction cups, hook, etc)
5. Design should be suitable for manufacture being 90%+ silicone
Wants:
The main selection of the winner will be improving on our current design to improve esthetic value of device, while maintaining functionality
Don't Wants:
Bulky
Difficult to hold
Additional Information
Preference is for a brush that is round in shape. Please improve on current design or redesign for low cost manufacturing.

Entries

= Buyer's Rating
#8 Shower Brush Design by sherifelsheikh
#7 Shower Brush Designs by Aidan_Bunting
#5 Soap Filled Brush by Triyono_dawuan
Hidden design
#2 New Brush Design by adame
Hidden design
#1 contemporary shower head by Albatros

Discussion

cad_cam_unity

Designer

Fri, 14 Jun 2024 08:36:55 +0000
I HAVE JUST SUMMITTED MY DESIGN AND ANY CUSTOMIZATION CAN BE DONE ACCORDING TO YOU
@mafia17

mafia17

Buyer

Wed, 12 Jun 2024 18:43:07 +0000
Also, regarding the size. We would like the entire device to be smaller in diameter

mafia17

Buyer

Wed, 12 Jun 2024 18:40:23 +0000
The handle screws off and u would like for soap to fill through there. Please do change the mechanism. Your design can be completely unique of our design. We are more focused on function and materials. Soap on demand and silicone.
Wed, 12 Jun 2024 18:37:42 +0000
can I get a brief description on how the product works? does the handle unscrew to put soap inside? Would that be liquid or solid soap, and can I propose changes to the mechanism?
Wed, 12 Jun 2024 09:47:52 +0000
Thank you for the invitation!

mafia17

Buyer

Wed, 12 Jun 2024 07:40:21 +0000
Thank you for stopping by and checking it out!
Wed, 12 Jun 2024 07:23:57 +0000
Thanks for invitation

mafia17

Buyer

Tue, 11 Jun 2024 19:07:40 +0000
You are very welcome! Thanks for checking it out
Tue, 11 Jun 2024 19:06:17 +0000
Thanks for the invitation

mafia17

Buyer

Tue, 11 Jun 2024 18:41:51 +0000
Noted, STEP file of first iteration added.
Tue, 11 Jun 2024 15:46:18 +0000
Hi, the images are great, but CAD files (or at least a section view/exploded view of the internals, plus key dimension drawings) would be extremely helpful as well for this brief, because of the mechanics and ergonomic factors involved in the functionality of the product. Thanks!

Triyono_dawuan

Designer

Tue, 11 Jun 2024 09:48:40 +0000
Can you provide images and dimension files of your current design ?

mafia17

Buyer

Tue, 11 Jun 2024 09:24:05 +0000
I apologize, files of current design added.

adame

Designer

Tue, 11 Jun 2024 07:54:51 +0000
Can you provide images or CAD files of your current design ?
Tue, 11 Jun 2024 03:35:42 +0000
Hi, can you provide images of your current design?

Similar Contests on Cad Crowd

Money Storage Bank Bins for Kids
Hi, I am looking for some design ideas for a money storage bank bin for kids. It's a different twist to the traditional piggy banks. I will eventually need to create a 3D CAD of this so that I can create a prototype for it. It will need to have 3 bins designated with 1) Save 2) Spend 3) Share. I envision the approx size of the container to be 5x7x2, clear, that opens up with an attached lid, and on the outside, will be a ledger where it will be used to track withdrawls and deposits. These 3 containers will then need to be placed into a larger single container. Easy for kids to open, close and carry.
Hair lifting scalp aerating design
Thank you for taking on this design challenge! We are looking to create a piece that can slide into the hair and separate it creating more airflow for scalp health and preventing hat head. Imagine a product milimeters high that slides in like a head band, ideally it would lift hair and sort it to prevent bacterial growth, sweat and flat hair. It should also be able to take on some of the weight of the hat or scarf worn so the hair wont be crushed. ( I had made a headband out of pipe cleaners and this did great to distribute the weight of my scarf and not crush my hair totally but it was not ideal and there was no breathability for the scalp as the hair just laid flat. I imagine some sort of geometric design mixed with the right material that will stay on the head without the need for too many clips. The material needs to allow for antimicrobial properties as well as breathability as it will hold the hair in place, and when hat or head covering is removed, the hair will be voluminous and not crushed or flattened. I know nothing like this exists, but the purpose of the product design is to maintain hair health health/ cleanliness and volume under coverings. Ideas that entertain for material, design, structure and air flow will be asked to prototype in a second design challenge.
Bluu20 "Pump It Up" Soap Bottle Design Contest
Be a part of History! With the outbreak of Coronavirus, hand washing has become an imperative daily routine to help prevent the spread of this disease. A 12 year old inventor and entrepreneur has formulated a revolutionary soap-like disinfectant to help curb the spread of Covid-19. Now, she is looking for an innovative bottle designer to help her design a unique bottle that compliments the new product line and provides added value and safety. THE CHALLENGE: Design a Fresh, Original and Safer Soap Bottle for this new cutting edge product! There are many soaps on the market – So, make your Soap Bottle Design stand out and drive sales! The design must address the growing concerns with sanitation and hygiene. This challenge focuses on creativity, originality and design. Winner will not only receive Prize Money!!!! If your bottle is selected, as our winner you will be part of history, receiving design recognition in our extensive media campaign, including a featured video spot. (This part of the prize is optional. So, if you’re camera shy we totally get it.) Technical Requirements : Must hold 7.5 fl Oz (preferred size) to maximum 12 fl oz. Not a must, but standard soap pump ‘engine’ makes it easier to reach target costs (Standard “Pump” Product file included for your consideration) Must be able to be mass produced. Must contemplate space for required manufacturing labels. Entry must include: 

 Please submit your design entry with images, a Neutral File Format (.igs, .stp, .fbx, .obj, .x3d, etc.) and a native file format if applicable (SolidWorks, Inventor, CATIA, Creo, NX, 3ds max, etc.). 
 Rendering of your design preferred 2D drawings for design patent Calculations for soap capacity
Smart display screens to be placed around the house
We need your help with developing a small screen (Oled) that will be used for displaying messages and information. The small screens will be used all over the house and need to be able (with different cradles or other solutions…) to be attached to cabinets (kitchen, laundry room, garage...etc) hang on walls, and stand on flat surface such as kitchen counter, table etc. More details of what needed as follow: Screens need to be either slided into different cradles for example: * A cradle with mini suction cups so it can be attached to flat surface such as kitchen’s cabinets. (Fig. A) * A stand cradle like different smartphone cases have so it can stand on flat surface such as kitchen counter, table etc. (See Fig. B) * A cradle to be hang on walls like a small picture, or using a magnet like this https://www.kickstarter.com/projects/studioproper/wallee-m-modular-magnetic-phone-mounting-system * A cradle with electric plug so it can be plugged into an outlet (On a kitchen counter etc.) and continue functioning while being charged https://www.prong.com (See also Fig. C) Or a better and prefered solution will be a design of a screen with all of the above (or as many options as possible). Like this idea for example http://www.weaseleasel.com/, but with the above options. Or some kind of a combination with this concept https://www.kickstarter.com/projects/oona/the-oona-whatever-you-need-it-to-be?ref=card *Screen need to be able to be attached/stand/hang both vertically and horizontally
Design Improvement of a lock - Make it look better
Hello, We are currently working on replicating a design of a fridge lock(see https://www.amazon.com/dp/B09WQNPKD4 ). Please check the link images and video so you can understand how the product work and technical terms. We would like to replicate this product while keeping: - Same adhesive surface size - Same recessed door frame range(see image 4): -9mm to +5mm - Same max sealing: 25mm I'd like you to suggest a better outer look(housing, buttons, and moving parts). I just want it to look better than the existing product. I am open to suggestions though. I have attached: - a .stp file of a similar model although not the same. This .stp file is respecting the 3 criteria above(max strip size, adhesive size...). Preview images of the stp file are attached too. - Video of the real product