Hair lifting scalp aerating designBlind

in Consumer Products held by bese
Contest Ended, Winner(s) have been selected.
Description:
Thank you for taking on this design challenge!

We are looking to create a piece that can slide into the hair and separate it creating more airflow for scalp health and preventing hat head.
Imagine a product milimeters high that slides in like a head band, ideally it would lift hair and sort it to prevent bacterial growth, sweat and flat hair.
It should also be able to take on some of the weight of the hat or scarf worn so the hair wont be crushed. ( I had made a headband out of pipe cleaners and this did great to distribute the weight of my scarf and not crush my hair totally but it was not ideal and there was no breathability for the scalp as the hair just laid flat.

I imagine some sort of geometric design mixed with the right material that will stay on the head without the need for too many clips.

The material needs to allow for antimicrobial properties as well as breathability as it will hold the hair in place, and when hat or head covering is removed, the hair will be voluminous and not crushed or flattened.
I know nothing like this exists, but the purpose of the product design is to maintain hair health health/ cleanliness and volume under coverings.
Ideas that entertain for material, design, structure and air flow will be asked to prototype in a second design challenge.
Wants:
The material used must be washable.
The design should be comfortable.
Ideally it will hold onto hair without pins or clips.
Design should reflect organic shapes of head and not try to change shape.
Extra points for design that includes material that is non-slip meaning the product incorporates a final layer that will somehow grip onto the scarf as well helping it to not slip.
Keep in mind scarves are made of cotton, silk, chiffon so make sure the non-slip feature will not damage these fabrics once removed.
Hair support should run along the crown from the forehead to the back of the top of the head. See drawing.

Should be easily removable as well and not tangle the hair.
Think: a headband motion that pushes from forehead back.

Designed product should not be visible under cap/scarf.
Don't Wants:
heaviness
bulkiness
materials that are scratchy or that will harm scalp
Sharp plastic points
Slippage and having to readjust constantly

Entries

1st Winner
#16 Hair lifting scalp aerating design by Quantum_Designs
Hello Sir,
Attached 5th Concept,
Please let me know for any missing elements /revisions / modifications,
Also let me know your dislikes, to come up with new concept,
Design details shared with message,
Thank you,
more
Sep 30, 2020 19:19
#25 2nd Model Hair Lifting by Chaniago
Hi ... Bese
Here's my second design model.
For details and descriptions please see the attachment
Hopefully this second design model can help you.
I will wait for suggestions and feedback regarding this second design.
Thank you
Regards,
Chaniago
more
Oct 6, 2020 21:23
#37 Only files "bands with teeth" by Ivan Zerpa
These are the cad files of the only bands with teeth. I have also sent you the files by private message.
more
Oct 10, 2020 13:13
#36 4th Model Band Frame Hair Lifting Scakp by Chaniago
Hi ... Bese
Here I attach a section frame according to your previous request. And to make it easier for you to view and check this design, I also attach a 2D pdf format. So that if there is a request for a design change, you can immediately write or add directly to the pdf file and send it to me. So that it can reduce errors in understanding in design changes.
Thank you
Regards,
Chaniago
more
Oct 10, 2020 10:41
#14 Hair lifting scalp aerating design by Quantum_Designs
Hello Sir,
Attached 4th Concept,
Please let me know for any missing elements /revisions / modifications,
Also let me know your dislikes, to come up with new concept,
Design details shared with message,
Thank you,
more
Sep 24, 2020 18:04
#4 Design concept V0 by Luka B.
Hello,
find attached our initial conceptual design proposal and a short PDF presentation.
For further questions don't hesitate to contact us.
Regards,
Luka
more
Sep 14, 2020 10:32
#31 Hair lifting scalp aerating design by CjOY
Sliding pair design
more
Oct 9, 2020 18:55
#23 HAIR AERATOR by Jim81
Hello, see attached for my take on your design scope.
more
Oct 5, 2020 20:55
#24 HeLi-Hair lifter by praveen_designs
Greetings!
Please check zip file for step files and all details.
Hope you'll like it.
Regards
Ankit Bharangar
more
Oct 6, 2020 12:33
#26 Hair lifting scalp aerating design by Ivan Zerpa
Hi.
Here I present to you my design proposal.
If you have any requirements or questions please contact me, I am at your services.
The files are compressed, to decompress them use winrar or similar
Best regards,
Ivan Zerpa
more
Oct 7, 2020 3:09
#29 Hair lifting scalp aerating design model 2 by Ivan Zerpa
Hi Bese.
Here is the second design with the requirements that you asked me
Best regards,
Ivan Zerpa
more
Oct 9, 2020 14:46
#30 Hair aerating helmet by thirumaravans
Hair aerating helmet
more
Oct 9, 2020 16:29
#21 Hair lifting Headware holder _ Concept 1 by harrys
Hi there,
Here is my basic concept for visual illustration with a ppt. added for design intent clarity.
I am currently modelling the next concept, any inputs received will be added to this.. Very interesting project thanks!
more
Oct 5, 2020 16:45
#32 Heli 2 by praveen_designs
please check all files inside zip.
Plastic mesh is snapped over steel structure to maintain shape of head.
more
Oct 9, 2020 19:06
#33 Seli by praveen_designs
Made up of silicon and supported by plastic sticks.
Please check all files inside zip.
more
Oct 9, 2020 19:08
#34 Heli 3 by praveen_designs
lightweight mesh is spot welded to steel structure to maintain shape and strength without compromising functionality.
more
Oct 9, 2020 19:09
#35 Last minute design by haitham
I hope you happy with this.
I loved working with you"brain storming".
Thanks
more
Oct 9, 2020 19:20
#38 Hair Lifting VER01 - REV00 by Gregorius Giga
Hi,
This is my new updated about Hair Lifting, completely with smooth surface all around. Please give your feedback and review.
Thank you, Giga
more
Oct 10, 2020 23:54
#39 Hair Lifting VER02 - REV00 by Gregorius Giga
Hi Bese,
Uploading my other concept with different profile of tooth, comfortable with the with and angle profile of the Frame, Please tell me if you need some modification or if something is missing,
Thank you, Giga
more
Oct 11, 2020 0:27
#11 Hair lifting scalp aerating design by Quantum_Designs
Hello Sir,
Attached 3rd Concept,
Please let me know for any missing elements /revisions / modifications,
Also let me know your dislikes, to come up with new concept,
Design details shared with private message,
Thank you,
more
Sep 22, 2020 16:55
#2 hijab lifting by haitham
Hello
this design may fit with soft rubber nails as we discussed in previous chat.
Waiting for your comments
Haitham
more
Sep 11, 2020 15:50
#3 Hair lifting scalp aerating design by Quantum_Designs
Hello Mr. Bese,
Attached 1st Concept,
Please let me know for any missing elements /revisions / modifications,
Also let me know your dislikes, to come up with new concept,
Design details shared with private message,
Thank you,
more
Sep 13, 2020 18:43
#5 other design by haitham
check this design and summary with.
thanks
more
Sep 16, 2020 12:32
#6 design model by haitham
this is how this design looks.
more
Sep 16, 2020 12:39
#7 design model by haitham
this is how this design looks.
more
Sep 16, 2020 12:39
#8 Hair lifting scalp aerating design by Quantum_Designs
Hello Sir,
Attached 2nd Concept,
Please let me know for any missing elements /revisions / modifications,
Also let me know your dislikes, to come up with new concept,
Design details shared with private message,
Thank you,
more
Sep 16, 2020 14:15
#9 design as required by haitham
still draft as only paths.
Thanks
more
Sep 18, 2020 15:17
#10 as required by haitham
Sep 21, 2020 10:24
#22 1st Model Hair Lifting Scalp by Chaniago
Hi ... Bese
The following is my first design for the aerating scalp hair lifting
Hopefully it can help you, I will wait for suggestions and feedback regarding this design
Thank you
Regards,
Chaniago
more
Oct 5, 2020 19:51
#12 As discussed by haitham
I hope you like this model.
details in message.
regards
haitham
more
Sep 24, 2020 14:03
#13 Hair lifting aerating design - ver01 - rev00 by Gregorius Giga
Ver 01
more
Sep 24, 2020 15:40
#15 based on request by haitham
Hello
this is the modification based on your request in the last message.
Thanks
more
Sep 25, 2020 10:04
#17 design model after notices by haitham
Oct 2, 2020 13:47
#18 Hair Aerator by joshuam1
This hair lifting scalp aerating design is similar to a plastic hard headband. When the main part of the headband, depicted in red above, is placed on your head, the soft flexible plastic bristles will engage with your scalp. Next the back piece, depicted in blue above, will slide up and back, and engage with the back of your scalp. Finally the front piece, depicted in green, will slide up and forward, and engage with the front of your scalp as you slide it toward the back of your head. When the yellow knob is turned, the three headband pieces are locked into place. Note the slotted holes that allow for additional movement while donning the headband. Plastic clips allow the user to clip a scarf or other head coverings to the back and front pieces.
The spacing and size of the bristle are shown for conceptual purposes. There would be some trial and error when selecting the bristle types. There are plastics that are hydroscopic such as nylon. There are plastics that are inert and will not retain odor. Something like this could be easily 3D printed and different bristle could be swapped out until the desired affect is achieved.
more
Oct 4, 2020 14:06
#20 hair aerating by haitham
Sent the model in .dwg file and .stl ready to print.
more
Oct 5, 2020 15:08
#1 hijab lifting by haitham
I give you 2 rough screenshots for two uncompleted designs to choose which one to finish.
Both designs will be supplied with "red colored "soft plastic nails -15 mm high as height as you wish - with the sphere exactly like the hair brush like the "photo 4".
the design with head as a yellow sphere as an example for head-till now- will contain 3 plastic bands one piece to be fixed behind the ear just like the model you made.
the other photo indicates contains big 6 holes - all supplied with nails in red for height- This would be supplied with another row to cover the area you drew before.
Waiting for your reply to go on with one design of them.
thanks
more
Sep 11, 2020 11:13

Discussion

Gregorius Giga

Designer

Sun, 11 Oct 2020 01:33:34 +0000
Jim81,
Hi Jim81,
You know that not just me submiting design while on the choosing finalist phase, and you know that i make a revision of the . I don't know if that is a problem? Please tell me where is the problem? Thank you

Jim81

Designer

Sun, 11 Oct 2020 00:29:01 +0000
@Gregorious Giga. You cannot post after a contest ends.

Jim81

Designer

Sun, 11 Oct 2020 00:04:29 +0000
@Gregorious Giga. You cannot post after a contest ends.

Quantum_Designs

Designer

Fri, 11 Sep 2020 11:24:59 +0000
Interesting project, Thank you for the contest, Will participate :)
Thu, 10 Sep 2020 15:03:02 +0000
Hi bese,

I would really like to research more for few days then carry on with design..

I had experienced that few design contest ended too early then mentioned available days. Do let know the days you mentioned is completely available to utilize or you may end it once you find perfect design. So that I can plan accordingly. :)

bese

Buyer

Wed, 09 Sep 2020 23:04:06 +0000
I didn't want metal because it has to be washable. Also, when worn under a scarf/veil/hijab, it will be high and uncomfortable.
Remember the area of hair lifted is the whole top of the head from forehead to back of top of head. I hope this helps.

haitham

Designer

Wed, 09 Sep 2020 22:11:46 +0000
Hello
I can give you some designs look like this design.

https://gofile.io/d/3jw4sa

Waiting for your comments for further modifications.
Thanks
Haitham

Similar Contests on Cad Crowd

Bluu20 "Pump It Up" Soap Bottle Design Contest
Be a part of History! With the outbreak of Coronavirus, hand washing has become an imperative daily routine to help prevent the spread of this disease. A 12 year old inventor and entrepreneur has formulated a revolutionary soap-like disinfectant to help curb the spread of Covid-19. Now, she is looking for an innovative bottle designer to help her design a unique bottle that compliments the new product line and provides added value and safety. THE CHALLENGE: Design a Fresh, Original and Safer Soap Bottle for this new cutting edge product! There are many soaps on the market – So, make your Soap Bottle Design stand out and drive sales! The design must address the growing concerns with sanitation and hygiene. This challenge focuses on creativity, originality and design. Winner will not only receive Prize Money!!!! If your bottle is selected, as our winner you will be part of history, receiving design recognition in our extensive media campaign, including a featured video spot. (This part of the prize is optional. So, if you’re camera shy we totally get it.) Technical Requirements : Must hold 7.5 fl Oz (preferred size) to maximum 12 fl oz. Not a must, but standard soap pump ‘engine’ makes it easier to reach target costs (Standard “Pump” Product file included for your consideration) Must be able to be mass produced. Must contemplate space for required manufacturing labels. Entry must include: 

 Please submit your design entry with images, a Neutral File Format (.igs, .stp, .fbx, .obj, .x3d, etc.) and a native file format if applicable (SolidWorks, Inventor, CATIA, Creo, NX, 3ds max, etc.). 
 Rendering of your design preferred 2D drawings for design patent Calculations for soap capacity
Money Storage Bank Bins for Kids
Hi, I am looking for some design ideas for a money storage bank bin for kids. It's a different twist to the traditional piggy banks. I will eventually need to create a 3D CAD of this so that I can create a prototype for it. It will need to have 3 bins designated with 1) Save 2) Spend 3) Share. I envision the approx size of the container to be 5x7x2, clear, that opens up with an attached lid, and on the outside, will be a ledger where it will be used to track withdrawls and deposits. These 3 containers will then need to be placed into a larger single container. Easy for kids to open, close and carry.
Smart display screens to be placed around the house
We need your help with developing a small screen (Oled) that will be used for displaying messages and information. The small screens will be used all over the house and need to be able (with different cradles or other solutions…) to be attached to cabinets (kitchen, laundry room, garage...etc) hang on walls, and stand on flat surface such as kitchen counter, table etc. More details of what needed as follow: Screens need to be either slided into different cradles for example: * A cradle with mini suction cups so it can be attached to flat surface such as kitchen’s cabinets. (Fig. A) * A stand cradle like different smartphone cases have so it can stand on flat surface such as kitchen counter, table etc. (See Fig. B) * A cradle to be hang on walls like a small picture, or using a magnet like this https://www.kickstarter.com/projects/studioproper/wallee-m-modular-magnetic-phone-mounting-system * A cradle with electric plug so it can be plugged into an outlet (On a kitchen counter etc.) and continue functioning while being charged https://www.prong.com (See also Fig. C) Or a better and prefered solution will be a design of a screen with all of the above (or as many options as possible). Like this idea for example http://www.weaseleasel.com/, but with the above options. Or some kind of a combination with this concept https://www.kickstarter.com/projects/oona/the-oona-whatever-you-need-it-to-be?ref=card *Screen need to be able to be attached/stand/hang both vertically and horizontally
Am I Safe to Get a Haircut
In the coming months as US businesses open up, this does not guarantee people will come. We are seeing this in some of the EU countries. The streets are still close to empty. Small one-on-one businesses need a way to “demonstrate” to their customers that they will be “safe”. When you turn it on, this “box on wheels” will make the small room “negative” with respect to the other rooms or WRT the hallway. This guarantees that anything bad in that room stays in that room. It does this because inside is a small blower. The inlet of the blower is “in the room” and the outlet of the blower goes out the window This causes the room to “go negative” WRT adjacent rooms or hallway. If you were to put a small string under the door, you would see the string being “pulled into the room”. This “box on wheels” also filters the air that passes thru it using a HEPA filter. Then a small UV lamp is trained on this HEPA filter and the UV light kills the virus.
Baby Spoon
I need a baby spoon that keeps the food closed inside the spoon so that it doesn't spill or open until the baby is ready to eat. Most of the time he is not ready to swallow the food. When he is pressured into eating, he has learned to swing at the spoon and knock down the food on the spoon. This spoon mechanical design will only open open a parent pressing a button for the spoon to open.