Small Kitcken Device / Safety Seal Opener Blind
in
Consumer Products
held by
alexg7504
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
Project Overview: We are seeking a skilled freelance 3D product/industrial designer to create a prototype for an innovative kitchen device. The product is designed to make it easier to open the safety seal found on the INSIDE of seasoning and vitamin bottles by placing the device on top of the bottle (DOES NOT CUT THE WRAPPER ON THE SIDE OF THE BOTTLE). The device should be user-friendly, ergonomic, and, if possible, adjustable to accommodate different bottle sizes. Please use the provided mock up as a foundation, but we understand concessions will more than likely be made in order to create the most realistic and usable product. This prototype will be used for future mass scale production in a mold. We're a team of marketers and sales professionals without a background in product design, so we'd really appreciate some guidance in turning this idea from concept to reality.Description:
The product is a grinder look alike item that attaches to a vitamin or seasoning bottle cap to break (rip or tear ) the safety seal. The blade positioning is still flexible in concept. While the initial idea shows horizontal blades, we're open to other configurations as long as the design is practical and easy to use. We're also exploring the possibility of an adjustable side wheel for the blades to fit different bottle sizes.
Description:
The product is a grinder look alike item that attaches to a vitamin or seasoning bottle cap to break (rip or tear 180 degrees) the safety seal. The blade positioning is still flexible in concept. While the initial idea shows horizontal blades, we're open to other configurations as long as the design is practical and easy to use. We're also exploring the possibility of an adjustable side wheel for the blades to fit different bottle sizes.
Wants:
The device should accommodate for the most general size of vitamin / seasoning bottles (mccormick & Nature Made). Please message us if you have any questions for more specifics.
Don't Wants:
Items that stray too far from the original design mock up. PLEASE REFER TO MOCK UP BEFORE ADDING ENTRIES. We understand compromises might be made, but we have a certain vision for it.
Prepaid PrizeEntries
1st Winner
#44 Safety Seal Opener - Design 1
by Inerapello
#20 seal opener concept design 2
by joshuajaiyeola
#31 Bottle Seal Opener V2.0
by HaSwan
Download Files
#9 Minimalist Design
by HaroonSaeed
Download Files
#7 safety seal opener finger loop
by vladc1
Download Files
#33 Seal opener concept design 2.2
by joshuajaiyeola
#1 3D product
by k_sami
Download Files
#43 Safety Seal Opener
by ahmadnazree
Download Files
#42 Safety Seal Opener
by abuh1
Download Files
#54 Small Kitcken Device / Safety Seal Opener
by Kzswara
Download Files
- STEP/STP 3D Modeling — Part Studio 15
- STEP/STP 3D Modeling — Assembly 15
- Sketch pdf — Part 1 Drawing 1
- Thread — Screenshot 2025 0323 091436
- RENDER — Screenshot 2025 0322 211910
- RENDER — Screenshot 2025 0322 212148
- RENDER — Screenshot 2025 0322 212234
- RENDER — Screenshot 2025 0322 212820
- RENDER — Screenshot 2025 0322 213444
- RENDER — Screenshot 2025 0322 213627
- RENDER — Screenshot 2025 0322 213736
- RENDER — Screenshot 2025 0323 091152
- RENDER — Screenshot 2025 0323 091215
- RENDER — Screenshot 2025 0323 091252
- RENDER — Screenshot 2025 0323 091343
- RENDER — Screenshot 2025 0323 091539
- RENDER — Screenshot 20250322 211642
- RENDER — Screenshot 20250322 212939
#45 Safety Seal Opener
by prasenjitm
Download Files
#46 Safety Seal Opener - Design 1 - Assembly
by Inerapello
Download Files
#47 Safety Seal Opener
by ahmadnazree
#48 Safety Seal Opener - Design 1
by Inerapello
Download Files
#49 Safety Seal Opener - Design 2
by Inerapello
#50 Safety Seal Opener
by ahmadnazree
Download Files
#51 Safety Seal Opener
by ahmadnazree
Download Files
#52 Safety Seal Opener
by ahmadnazree
Download Files
#41 Safety Seal Opener
by ahmadnazree
Download Files
#53 Safety Seal Opener
by ahmadnazree
Download Files
#34 Safety Seal Opener
by VincentCADCAM
Download Files
#55 Safety Seal Opener
by ahmadnazree
Download Files
#56 Twist cap
by honfogae
#57 SEAL OPENER CONCEPT DESIGN 3
by joshuajaiyeola
#58 Safety Seal Opener
by ahmadnazree
Download Files
#59 Safety Seal Opener - Design 3
by Inerapello
#60 Rubbermaid©silicon: "Seal-Breaker"
by danielf9043
Download Files
#61 Seal Opener - Design 4
by Inerapello
#62 Small Kitcken Device / Safety Seal Opener
by Kzswara
Download Files
- STEP/STP 3D Modeling — Part Studio 1
- RENDER — Screenshot 2025 0327 125355
- RENDER — Screenshot 2025 0327 125635
- RENDER — Screenshot 2025 0327 125756
- RENDER — Screenshot 2025 0327 125838
- RENDER — Screenshot 2025 0327 125908
- RENDER — Screenshot 20250327 125942
- RENDER — Screenshot 20250327 130331 1
- Cutoff — Screenshot 2025 0327 132114
- Cutoff — Screenshot 2025 0327 132216
- Cutoff — Screenshot 2025 0327 131623
#63 Safety Seal Opener
by Design_InGenesis
Download Files
#64 Small Kitchen Device / Safety Seal Opener
by sherifelsheikh
#65 Twist Cap Seal Remover
by kynanm
Download Files
#66 Twist cap II
by honfogae
#67 Twist cap 2
by honfogae
#18 Seal opener concept design 1
by joshuajaiyeola
#2 Injection moulder rubber kitchen wrapper cutter
by jamiew
Download Files
#3 Cap with side tooth to cut seal
by MécaCim
Download Files
#4 Plastic opener
by MécaCim
Download Files
#6 Ergonomic Multi-purpose Seal Opener
by nanakwesia
#8 Cutter
by Mike_Efanov
Download Files
#10 Seal-Cutter-V01
by humayun
Download Files
#12 Seal-Cutter-V02
by humayun
Download Files
#13 Protein Bottle Cover Cutter
by AKAI2002
Download Files
#14 kitchen device
by clintsar
Download Files
#15 Small Kitcken Device / Safety Seal Opener
by ushied
Download Files
#16 Safety Seal Opener
by vectorhssh
Download Files
#17 Detailed- Cutter Design
by HaroonSaeed
#40 Simple Use Safety Seal Opener
by Advandes
Discussion
Hello, I mistakenly submitted two entries (
and 
) of the same design, I apologizes for the confusion. The second entry had an animation video.
and ) of the same design, I apologizes for the confusion. The second entry had an animation video.
Hi there.
I have submitted a design for the Adjust-Twist Seal Cutter concept, including a STEP file and several JPEG files for reference. Additionally, I have written a product specification to explain how the cutter works, along with the key features that make it an efficient and user-friendly tool.
I have submitted a design for the Adjust-Twist Seal Cutter concept, including a STEP file and several JPEG files for reference. Additionally, I have written a product specification to explain how the cutter works, along with the key features that make it an efficient and user-friendly tool.
Good day, I submitted multiple entries of the same design, I apologizes for the confusion.
Are you looking for a tool that is multi use or to be built into the design of the vitamin bottle?
@awaismughal they are looking for a CAD design of a tool which can cut or tear the inner packing seal of vitamin container.
Hi Buyer!! Why we need full cap shape which is only specific to one particular size. Why we are not stick with arc like shape instead of circular?
Hi, thank you for responding to our comments on the previous contest.
A question about the product; do you have a vision or estimate of the largest and smallest size of bottle you want it to work for? It would also be helpful for design the product
A question about the product; do you have a vision or estimate of the largest and smallest size of bottle you want it to work for? It would also be helpful for design the product
Hi sorry i can't read your message Sir i really don't understand which thing you need can you please share some pictures
Similar Contests on Cad Crowd
Money Storage Bank Bins for Kids
Hi, I am looking for some design ideas for a money storage bank bin for kids. It's a different twist to the traditional piggy banks. I will eventually need to create a 3D CAD of this so that I can create a prototype for it. It will need to have 3 bins designated with 1) Save 2) Spend 3) Share. I envision the approx size of the container to be 5x7x2, clear, that opens up with an attached lid, and on the outside, will be a ledger where it will be used to track withdrawls and deposits. These 3 containers will then need to be placed into a larger single container. Easy for kids to open, close and carry.
Bluu20 "Pump It Up" Soap Bottle Design Contest
Be a part of History! With the outbreak of Coronavirus, hand washing has become an imperative daily routine to help prevent the spread of this disease.
A 12 year old inventor and entrepreneur has formulated a revolutionary soap-like disinfectant to help curb the spread of Covid-19. Now, she is looking for an innovative bottle designer to help her design a unique bottle that compliments the new product line and provides added value and safety.
THE CHALLENGE: Design a Fresh, Original and Safer Soap Bottle for this new cutting edge product!
There are many soaps on the market – So, make your Soap Bottle Design stand out and drive sales! The design must address the growing concerns with sanitation and hygiene. This challenge focuses on creativity, originality and design.
Winner will not only receive Prize Money!!!! If your bottle is selected, as our winner you will be part of history, receiving design recognition in our extensive media campaign, including a featured video spot. (This part of the prize is optional. So, if you’re camera shy we totally get it.)
Technical Requirements :
Must hold 7.5 fl Oz (preferred size) to maximum 12 fl oz.
Not a must, but standard soap pump ‘engine’ makes it easier to reach target costs (Standard “Pump” Product file included for your consideration)
Must be able to be mass produced.
Must contemplate space for required manufacturing labels.
Entry must include:
Please submit your design entry with images, a Neutral File Format (.igs, .stp, .fbx, .obj, .x3d, etc.) and a native file format if applicable (SolidWorks, Inventor, CATIA, Creo, NX, 3ds max, etc.).
Rendering of your design preferred
2D drawings for design patent
Calculations for soap capacity
Hair lifting scalp aerating design
Thank you for taking on this design challenge!
We are looking to create a piece that can slide into the hair and separate it creating more airflow for scalp health and preventing hat head.
Imagine a product milimeters high that slides in like a head band, ideally it would lift hair and sort it to prevent bacterial growth, sweat and flat hair.
It should also be able to take on some of the weight of the hat or scarf worn so the hair wont be crushed. ( I had made a headband out of pipe cleaners and this did great to distribute the weight of my scarf and not crush my hair totally but it was not ideal and there was no breathability for the scalp as the hair just laid flat.
I imagine some sort of geometric design mixed with the right material that will stay on the head without the need for too many clips.
The material needs to allow for antimicrobial properties as well as breathability as it will hold the hair in place, and when hat or head covering is removed, the hair will be voluminous and not crushed or flattened.
I know nothing like this exists, but the purpose of the product design is to maintain hair health health/ cleanliness and volume under coverings.
Ideas that entertain for material, design, structure and air flow will be asked to prototype in a second design challenge.
Smart display screens to be placed around the house
We need your help with developing a small screen (Oled) that will be used for displaying messages and information. The small screens will be used all over the house and need to be able (with different cradles or other solutions…) to be attached to cabinets (kitchen, laundry room, garage...etc) hang on walls, and stand on flat surface such as kitchen counter, table etc.
More details of what needed as follow:
Screens need to be either slided into different cradles for example:
* A cradle with mini suction cups so it can be attached to flat surface such as kitchen’s cabinets. (Fig. A)
* A stand cradle like different smartphone cases have so it can stand on flat surface such as kitchen counter, table etc. (See Fig. B)
* A cradle to be hang on walls like a small picture, or using a magnet like this https://www.kickstarter.com/projects/studioproper/wallee-m-modular-magnetic-phone-mounting-system
* A cradle with electric plug so it can be plugged into an outlet (On a kitchen counter etc.) and continue functioning while being charged https://www.prong.com (See also Fig. C)
Or a better and prefered solution will be a design of a screen with all of the above (or as many options as possible). Like this idea for example http://www.weaseleasel.com/, but with the above options. Or some kind of a combination with this concept https://www.kickstarter.com/projects/oona/the-oona-whatever-you-need-it-to-be?ref=card
*Screen need to be able to be attached/stand/hang both vertically and horizontally
Baby Spoon
I need a baby spoon that keeps the food closed inside the spoon so that it doesn't spill or open until the baby is ready to eat. Most of the time he is not ready to swallow the food. When he is pressured into eating, he has learned to swing at the spoon and knock down the food on the spoon. This spoon mechanical design will only open open a parent pressing a button for the spoon to open.
VincentCADCAM
Designer