BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality:... Read more

BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality: BMEC has a no-compromise approach to quality and safety. Ethical, elegant engineering is the cornerstone of our business. BMEC's multidisciplinary team specialises in using the latest technologies and manufacturing methods to provide insightful solutions quickly and affordably Time: Our dedicated team coupled with our partner-network of suppliers means we can guarantee the shortest development time. Cost: Our professional design and manufacturing services are highly competitive. Scope: Our experienced team is here to help you find balanced solutions that fit your budget and your timeline.

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

With over a decade of specialized experience as a mechanical designer in the water treatment industry, I focus exclusively on delivering high-precision designs for ultrafiltration (UF) and reverse osm... Read more

With over a decade of specialized experience as a mechanical designer in the water treatment industry, I focus exclusively on delivering high-precision designs for ultrafiltration (UF) and reverse osmosis (RO) systems — including brackish water RO (BWRO) and seawater RO (SWRO). My expertise spans the full design lifecycle: • Creating detailed 2D process flow diagrams (PFDs) and P&IDs • Managing design offices and implementing standardized design procedures and documentation to ensure consistency, efficiency, and compliance across projects • Extensive 3D modeling of custom components, parts, pump skids, CIP systems, and complete plants within steel frame structures or containerized setups • Optimized pipe routing for high-pressure systems, ensuring minimal pressure drops and ease of maintenance • Producing meticulous manufacturing drawings, detailed bills of materials (BOMs), and fabrication-ready packages • Delivering photorealistic 3D renderings for client presentations, proposals, and marketing I have successfully supported numerous water treatment projects by turning conceptual requirements into production-ready designs that reduce manufacturing errors, speed up assembly, and lower overall project costs. My work emphasizes accuracy, manufacturability, and adherence to industry standards (e.g., ASME, ISO where applicable). Whether you need a full containerized RO/UF plant layout, skid-mounted system redesign, detailed piping isometrics, or standardized templates for your team — I’m ready to deliver reliable, high-quality CAD work on time. Let’s discuss your project — upload your specs or sketches, and I’ll provide a quick proposal with timelines and approach.

Senior product designer and CAD specialist with 15+ years of experience turning product ideas, sketches, and rough concepts into practical 3D models, technical drawings, prototypes, and production-rea... Read more

Senior product designer and CAD specialist with 15+ years of experience turning product ideas, sketches, and rough concepts into practical 3D models, technical drawings, prototypes, and production-ready design files. I specialise in product design, 3D CAD modelling, electronics enclosures, injection-moulded parts, component packaging, ergonomic refinement, DFM, exploded views, and product visualisation. I have experience working with local South African fabricators and suppliers, as well as overseas suppliers and manufacturers in China. I can help with concept development, CAD modelling, design refinement, manufacturing drawings, supplier handover files, and realistic product renders. I have professional SolidWorks experience and can work from SolidWorks files if supplied. My current CAD delivery is mainly through Onshape and neutral formats such as STEP, IGES, STL, DXF, and PDF.

I’m a Mechatronic Engineer with 5+ years of experience in 3D design using Fusion 360 and Inventor. I specialize in design for manufacturing, 3D prototyping, and end-to-end product development. With ha... Read more

I’m a Mechatronic Engineer with 5+ years of experience in 3D design using Fusion 360 and Inventor. I specialize in design for manufacturing, 3D prototyping, and end-to-end product development. With hands-on experience from years of building functional parts for home and agricultural applications, I understand how to design for real-world use—especially in tough environments. I own and operate 3D printers for rapid prototyping and bring a strong background in electronics, including PCB and embedded system design. My solutions are always optimized for practical assembly, reliability, and cost-efficiency. My experience spans agricultural tools, mechanical assemblies, and consumer gadgets. I'm flexible, deadline-driven, and available for voice or video calls. Let’s turn your idea into a manufacturable reality.

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast... Read more

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast industry. Everything I design I try to make aesthetically pleasing, practical and mechanically strong enough for the job!

CS Artworks is a digital design & branding agency specialising in bespoke graphic design, web design & social media management services. We use professional tools and ai to offer high quality services... Read more

CS Artworks is a digital design & branding agency specialising in bespoke graphic design, web design & social media management services. We use professional tools and ai to offer high quality services at competitive prices.

I am a fully qualified draughtsman with an international qualification based in South Africa. I have over 10 years experience in drafting covering multiple disciplines. I work mainly in Solidworks and... Read more

I am a fully qualified draughtsman with an international qualification based in South Africa. I have over 10 years experience in drafting covering multiple disciplines. I work mainly in Solidworks and AutoCAD and am currently specializing in mechanical engineering, design and R&D. I have been in mechanical drafting for the last 6 years. I have experience in architectural and electrical drafting as well.

I'm a design draftsman with deep experience across the drawing office, specialising in PCB layout and 3D mechanical CAD. Most of my career has been spent translating engineering intent into clean, man... Read more

I'm a design draftsman with deep experience across the drawing office, specialising in PCB layout and 3D mechanical CAD. Most of my career has been spent translating engineering intent into clean, manufacturable drawings — board layouts, mechanical detail, assembly documentation, and the full data packages that fabricators and assembly houses actually need to build from. On the electronics side I've laid out multilayer boards up to 16 layers, including RF, high-speed digital, and analog work for GPS/GSM tracking units, high-resolution camera systems, and satellite hardware. On the mechanical side I produce 3D models, enclosures, and detailed production drawings. I work fluently in Altium Designer, P-CAD, CAM350, AutoCAD, and SolidWorks. What I bring to a project is a draftsman's discipline: accurate, complete, manufacturing-ready documentation, with a strong eye for design-for-manufacture so problems get caught on the drawing board, not on the production line.

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an appro... Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an approach in hand drawn sketching and illustration skills. I’m very experienced with CAD programs such as Revit Architecture, Sketch-up, Zbrush, Substance Painter & Designer, Megascane, Solidworks, 3ds Max, Keyshot & Vray

3D CAD designer with over 10 years experience in product design and development, injection/ blow mould design, mechanical design and sheet metal design.

3D CAD designer with over 10 years experience in product design and development, injection/ blow mould design, mechanical design and sheet metal design.

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3... Read more

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make yo... Read more

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make your Dream Project a reality by using my manufacturing design experience to develop your fantastic product cost-effectively. I design parts often used in the Professional and Manufacturing environment. Whether it is a single part of an assembly of numerous components, I will add value to your business. I have a crossover of skills that make me very effective. Here are some of my essential skills: • 3D Modeling (Solid Works 2021) • Manufacturing Drawings & Specifications • Design for Manufacturing (DFM) • Design for Assembling (DFM) • 3D Printing & Additive Manufacturing • Manufacturing Jiggs • Problem Solving • Critical Thinking About Me: I’m an honest person that enjoys working in the manufacturing environment that genuinely wants to help others around me. Working in this industry for the last 17 years has inspired me to start my Freelance with a new vision as a free-thinking individual to pursue new interests and add value to my customers. Productive collaboration drives me and gives me energy. I’ll take the time to gain a personal interest in your business, which will help me make significant contributions. I’m incredibly innovative, dedicated and pride myself to service excellence and attention to detail Have a nice day! Kobus Fourie Your innovative CAD Partner.

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electron... Read more

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electronic hardware and control systems to film-quality robotic arms. I have also been responsible for multiple products from their concept phase all the way to production and integration. I have always had a love for electronics and creating and for Mechatronics or Robotic projects. I am a good communicator with a wealth of knowledge and ample CAD experience (Autodesk Inventor and Fusion 360, SolidWorks, Siemens nX).

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Art... Read more

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Arts Gallery (AVA) in Cape Town as well as at the University of Johannesburg Art Gallery, in addition to featuring in the Visi Magazine.

I am an industrial designer with 3 years of experience specializing in SolidWorks. With a strong background in mechanical engineering, I bring a technical and creative approach to design, focusing on... Read more

I am an industrial designer with 3 years of experience specializing in SolidWorks. With a strong background in mechanical engineering, I bring a technical and creative approach to design, focusing on functionality and innovation. My expertise in CAD modeling and product development allows me to efficiently transform ideas into practical, manufacturable solutions.

I'm a SolidWorks user with 14+ years of experience, specializing in advanced surfacing techniques for consumer products, automotive components, composite part and mould design. Whether you're an indu... Read more

I'm a SolidWorks user with 14+ years of experience, specializing in advanced surfacing techniques for consumer products, automotive components, composite part and mould design. Whether you're an industrial designer with a vision, a startup building a prototype, or a manufacturer prepping for composite molding—I've got you covered. Services Offered: - Class-A surface modeling - Organic shapes and ergonomic forms - Reverse Engineering - Spline-driven surface development Conversion of rough or imported geometry to clean, manufacturable models Industries Served: - Industrial/product design - Automotive (panels, housings, concept parts) - Medical and wearable devices - 3D printing & prototyping Deliverables: - SolidWorks (SLDPRT/SLDASM) - STEP, IGES, STL, or native files

I'm a mechanical engineer with 10 years machine design experience. I'm specialized in material handling equipment, sheet metal and structural designs. I'm proficient in finite element analysis and str... Read more

I'm a mechanical engineer with 10 years machine design experience. I'm specialized in material handling equipment, sheet metal and structural designs. I'm proficient in finite element analysis and stress analysis theory and software. No job is too big or small!