Hire freelance Mechanical Engineering designers near Johannesburg, GT

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my... Read more

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my career to be exposed to many disciplines and master them.

I am a Turner / Machinist by trade and currently studying towards a career in both Mechatronics and Process Instrumentation at a local university. I started with technical subjects as early as high sc... Read more

I am a Turner / Machinist by trade and currently studying towards a career in both Mechatronics and Process Instrumentation at a local university. I started with technical subjects as early as high school and progress onto to an entry level position in the drawing office of a automation company where I gained experience in methods of modular design and CAD packages such as Solid works and Autodesk Inventor. I enrolled into an apprenticeship program where I obtain my red seal in Turning and continued to increase my exposure to FMCG based manufacturing companies by working in various industries such as automotive , pharmaceutical and general manufacturing companies. I have been involved in both the installation, commissioning and maintenance of manufacturing equipment in these industries and carry knowledge beyond the scope of just my current qualification. Therefor I have decides to enrolled at me local university in order to increase my theoretical knowledge on Electrical Engineering, specializing in Mechatronics and Process Instrumentation. My main interests is in industrial electronics and design of efficient and maintenance friendly equipment that is easily repaired and mostly modular in design.

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes... Read more

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes working as an Apprentice Fitter and Turner in a Steel Manufacturing Company for over 2 years and then as a Junior Engineer at a Consulting Company for more than 6 years. Currently, I am employed as a Mechanical Draughtsman with MV Switchgear manufacturer starting June 2022. I am a lifelong learner and use my free time to acquire new skills through personal projects. My areas of interest include Mechanical Design, CAD Draughting, Finite Element Analysis, Structural Design, Scripting, and Automation. I am proficient in Autodesk Inventor, AutoCAD, Nastran, ANSYS, VB.NET(i-logic) and Microsoft Office

I am a dedicated Industrial Engineer with strong technical, analytical, and hands-on engineering skills. With experience ranging from workshop fabrication and welding to design, simulation, data analy... Read more

I am a dedicated Industrial Engineer with strong technical, analytical, and hands-on engineering skills. With experience ranging from workshop fabrication and welding to design, simulation, data analysis, and tutoring, I bring a balance of practical and academic expertise. I have worked on real engineering projects involving steel structures, surveying, manufacturing processes, optimisation, and system design. I am proficient in Python, CAD tools (Fusion 360, Inventor, AutoCAD), ANSYS, X-Plane simulation, and Microsoft Excel (including VBA). I have also competed in national innovation competitions—finishing 3rd in both the TCS Sustainathon (2023) and Afretech AI Competition (2023)—showing my ability to solve problems creatively and work effectively in teams. I am energetic, reliable, and committed to producing high-quality work. My strengths include communication, teamwork, strategic thinking, and the ability to turn technical concepts into real solutions.

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surrounding... Read more

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surroundings quickly. I am always ready for new and exciting challenges that will allow me to apply my knowledge and abilities that I have gained through my studies and work experience. I strive for personal skill development and ensure that I keep improving my existing skills while constantly learning new skills. In my current position I am greatly exposed and experiencing the engineering aspect of providing functional products to international clients. I am heavily involved in research and development of new innovative products as well as working on the improvement of current products, utilizing testing results and simulations to enhance the performance and reliability of the products. Our products performing vital roles in the safety and protection of equipment and people we have to adhere to strict codes, regulations and procedure, each teaching me essential skills required in any engineering field. In my previous position I specialize in metrology solutions, undergoing training in GOM precision scanning as the main field of expertise. I also have come to terms with dealing with clients and providing them with solutions that satisfy their needs and requirements. Throughout my course work at the University and concurrent part time work, I have acquired a sound and overall knowledge accompanied with several professional skills related to leading edge engineering principals, tools and practices with emphasis on designing, building and testing of mechanical systems. I am proficient in the use of various automated solutions including current releases of Solidworks, Ansys and Star CCM+ as well as a variety of engineering machining tools.

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python,... Read more

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python, C++) PLC programming (LabVIEW, Siemens, others) Embedded design (Atmel, Microchip) Simulations (FEA, Motion) CNC (hobbyist) Animation and rendering (Blender [in progress]) ===Experience=== Process automation, automotive, food, packaging industries, product development.

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering res... Read more

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering results through hard work independently and also through collaborations will enable me to make valuable contributions to your projects and initiatives. I am confident that my technical knowledge, coupled with my passion for engineering, make me a strong candidate for your projects

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any par... Read more

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any particular project and help you deliver Projects on time. - My main Field of stronghold is Mechanical Engineering, Architectural and Fire Protection and have 4 fulltime skilled inhouse draughtsman. - I also have a network of skilled draughtsman in different disciplines of Draughting ready to be engage with your projects. - I also have capacity to Plot drawings in large format paper size (A0) which makes it easy if you need to submit drawings in hard copy.

I am a Mechanical CAD Designer and Draughtsperson with 5+ years of professional experience in 2D drafting, 3D modelling, plant design and manufacturing documentation across oil & gas, paper manufactur... Read more

I am a Mechanical CAD Designer and Draughtsperson with 5+ years of professional experience in 2D drafting, 3D modelling, plant design and manufacturing documentation across oil & gas, paper manufacturing and heavy industry. I work with AutoCAD Plant 3D, SolidWorks, Autodesk Inventor, Solid Edge and Navisworks to turn concepts, sketches, existing drawings and engineering requirements into accurate, practical CAD deliverables. My experience includes 3D mechanical models, P&IDs, PFDs, General Arrangement drawings, piping layouts, isometric drawings, fabrication drawings, sheet metal designs, DXF files, skid designs and Bills of Materials. I also have hands-on project experience involving field measurements, clash detection, drawing revisions, manufacturing, assembly, welding and workshop inspections. This allows me to design with real-world fabrication and installation requirements in mind. I can help with: • 2D CAD drafting and drawing conversion • 3D mechanical modelling and assemblies • Mechanical and manufacturing drawings • Fabrication-ready drawings • Plant 3D and piping layouts • P&IDs, PFDs, GAs and isometrics • Sheet metal and DXF drawings • Bills of Materials • Drawing revisions and CAD modifications • Concept-to-manufacturing CAD development If you have a sketch, PDF, existing drawing, 3D model or engineering concept, send me your requirements and I can help turn it into a professional CAD solution.

I am a Mechanical Engineering professional with a strong passion for CAD design, mechanical design, product development, and engineering problem-solving. My background combines mechanical engineering... Read more

I am a Mechanical Engineering professional with a strong passion for CAD design, mechanical design, product development, and engineering problem-solving. My background combines mechanical engineering principles with practical experience in creating detailed engineering drawings, developing mechanical concepts, and designing components and systems for real-world applications. My skills include 3D CAD modelling, 2D technical drawings, mechanical component design, assembly design, product design and development, CAD/CAM, Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), HVAC system design, and engineering analysis. I have experience working with engineering tools including Solid Edge, ANSYS Workbench, MATLAB and Simulink. My project experience includes mechanical product development, detailed engineering drawings, bulk material-handling systems, and the design of water transportation systems. These projects have strengthened my ability to take an engineering problem from an initial concept through modelling, analysis and detailed design. I am detail-oriented and focused on producing accurate, practical and manufacturable designs. I enjoy transforming ideas, sketches and engineering requirements into professional 3D models and production-ready technical drawings. I am particularly interested in CAD modelling, mechanical drafting, product design, machine components, assemblies, design modifications and engineering drawing projects. My goal is to provide clients with reliable, professional CAD work while continuously expanding my experience as a mechanical designer.

I am a Mechanical Engineering student at Stellenbosch University with two years of freelance experience in mechanical design, product development, CAD, electronics, and prototyping. Proficient in Soli... Read more

I am a Mechanical Engineering student at Stellenbosch University with two years of freelance experience in mechanical design, product development, CAD, electronics, and prototyping. Proficient in SolidWorks, Autodesk Inventor, AutoCAD, KiCad, and Visual Studio Code, with practical manufacturing experience gained through work with both a metalworking company and a 3D-printing factory. I am willing to work for low cost as I am trying to further my work experience portfolio and will only take payment after work has been completed to your satisfaction. Recent projects include the development of an electromagnetic broom for metal-workshop cleanup and a low-cost CNC plasma cutter designed with a target cost of under $100 which will soon be commercially viable. Furthermore I also work on many software projects such as video generation pipelines, AI intergration and machine learning.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

I've Designed and Manufactured a large spectrum of the Engineering field. A few sectors include Mining, Solar Field, Film Industry, Food Industry as well as precision and general engineering. I am a f... Read more

I've Designed and Manufactured a large spectrum of the Engineering field. A few sectors include Mining, Solar Field, Film Industry, Food Industry as well as precision and general engineering. I am a firm believer that with first hand experience in manufacturing principles and processes, products are better designed not only for end user but also for ease of manufacture. This offers cost savings throughout the production cycle, saving money and most importantly time.

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing a... Read more

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing at a competition class Sailplane factory I'm knowledgable with turbojet and turbofans system analysis and design with focus on centrifugal compressors

I am a Database Admin that wants to start up my own Fitting and Turning Company. I have Completed 3D Modeling Online tutorials for quite a bit and I want to grow my skill set even more. Being... Read more

I am a Database Admin that wants to start up my own Fitting and Turning Company. I have Completed 3D Modeling Online tutorials for quite a bit and I want to grow my skill set even more. Being Precise, hard-working is how I accomplish each task I take on. Willing to learn and expand my knowledge with each and everything I do. I will go the extra mile to make sure the expected end results are met, and communicate clearly with Clients.

Mechanical engineering calculations CAD drawings (SolidWorks / AutoCAD/ ANSYS) Engineering reports & documentation Design verification & problem-solving Materials analysis

Mechanical engineering calculations CAD drawings (SolidWorks / AutoCAD/ ANSYS) Engineering reports & documentation Design verification & problem-solving Materials analysis

I am a tool maker by trade with a passion for problem solving through intelligent design. I have Experience in both the automotive and mining Industries and have for the last 5 years worked for a com... Read more

I am a tool maker by trade with a passion for problem solving through intelligent design. I have Experience in both the automotive and mining Industries and have for the last 5 years worked for a company in multiple different roles who specialize in the repair and complete supply of industrial gearboxes.

Experienced Draughtsman adept at creating precise and comprehensive drawings. Proficient in drafting software and collaborative work, I deliver accurate drawings for projects. Deadline-oriented and qu... Read more

Experienced Draughtsman adept at creating precise and comprehensive drawings. Proficient in drafting software and collaborative work, I deliver accurate drawings for projects. Deadline-oriented and quality-focused. Committed to staying updated with industry trends, I am ready to contribute my drafting skills to drive project success.

I am a Mechanical Design Draughtsman with a strong technical foundation and over three years of hands-on experience in mechanical design, drafting, and engineering support. I hold a National Diploma (... Read more

I am a Mechanical Design Draughtsman with a strong technical foundation and over three years of hands-on experience in mechanical design, drafting, and engineering support. I hold a National Diploma (2016–2020) and an Advanced Diploma (2021–2023) in Mechanical Engineering, as well as Multidisciplinary Draughting N4 & N5 certifications. Since 2022, I have worked extensively with crushers, wear parts, screens, modular crusher systems, spare parts, and heavy machinery, developing a deep understanding of mechanical components and plant equipment. My expertise includes: 3D modeling and detailed manufacturing drawings Reverse engineering and design modifications Converting 3D scans into production-ready CAD models Development and optimization of wear liners, feed hoppers, and crusher assemblies Providing on-site technical support and design advice to improve equipment performance and efficiency I am passionate about delivering high-quality, precise, and functional CAD designs that meet client requirements and industry standards. I combine technical accuracy with practical engineering insight to produce solutions that enhance performance, durability, and maintainability. Whether it’s a new product design, equipment modification, or reverse engineering project, I bring attention to detail, reliability, and a results-driven approach to every project I take on.

Senior Mechanical Draughtsman and 3D Modeller with 30+ years of specialist experience across mining, metallurgical processing, oil refining, power generation, water treatment, and industrial plant pro... Read more

Senior Mechanical Draughtsman and 3D Modeller with 30+ years of specialist experience across mining, metallurgical processing, oil refining, power generation, water treatment, and industrial plant projects — with an international project footprint spanning 15 countries across Africa, Europe, Asia, and Australasia. I have worked almost entirely as a contractor and specialist throughout my career, building broad technical depth across plant layout, 3D piping, structural steelwork, mechanical detailing, and drawing checking — alongside section leadership and drawing office management on major EPCM and EPC projects. Core skills: 3D plant layout — piping, structural, mechanical, civil Isometric draughting and MTO production Drawing checking and QA across all disciplines Section leadership and drawing office management Pressure vessel and cryogenic equipment design Materials handling — conveyors, chutes, hoppers, crushers Mentoring and training of junior draughtsmen Software: AutoCAD (30+ years) - Autodesk Plant 3D - Autodesk Inventor - Solid Edge (ST7) - CADWorx Plant - Mechanical Desktop Selected projects: Anglo Platinum Potgietersrust North 600 ktpm UG2 Concentrator (3D plant layout and piping) Kusile Power Station Water Treatment Plant (piping design and DO management) Randgold Tongon Gold Project, Ivory Coast (3D piping layout) United Silicon 32 MW SAF, Iceland (drawing checking) ELECTRATHERM Cast Iron Blobulator Plant, India (3D structural, mechanical and piping) HDG water towers to 522 m3 — Angola, Botswana, South Africa Available immediately for remote, contract, and freelance assignments internationally.

I have 35 years 3d Design& Modelling experience in the Aerospace, Automotive, Industrial design and General product industries. I am able to design, prototype, test and manufacture new products using... Read more

I have 35 years 3d Design& Modelling experience in the Aerospace, Automotive, Industrial design and General product industries. I am able to design, prototype, test and manufacture new products using plastic injection, blow and roto molding, vacuum forming, metal pressings using CNC Milling, CNC Turning, Wire-Cutting and Spark Erosion.

I am a mechanical engineer with a completed Master’s degree in Mechanical Engineering and multiple years of practical engineering work experience in CAD design, product development, structural analysi... Read more

I am a mechanical engineer with a completed Master’s degree in Mechanical Engineering and multiple years of practical engineering work experience in CAD design, product development, structural analysis and engineering simulation. My services include 3D CAD modelling, mechanical component and assembly design, technical drawings, design improvements, FEA, CFD, composite laminate analysis and engineering calculations. I have worked on projects involving mechanical systems, electric mobility, composite structures, structural components and designs exposed to demanding environmental and loading conditions. My experience includes developing concepts, creating detailed CAD models, evaluating stresses and deformation, analysing airflow and pressure loads, selecting materials and improving designs for strength, weight, functionality and manufacturability. I primarily work with Siemens NX, Simcenter 3D, NX Nastran and SolidWorks. I can assist with both early-stage concepts and the refinement of existing designs, including preparing models and drawings for manufacturing, prototyping, machining, welding, sheet-metal fabrication and 3D printing. My approach combines practical mechanical design with simulation and analytical validation. I focus on delivering accurate, clearly documented and realistic engineering solutions that can be manufactured and used effectively, rather than producing CAD models that only look correct visually.

Registered mechanical engineer with more than eight years of combined academic and industry experience. Led and participated in applied engineering projects such as designing of solar off-grid and irr... Read more

Registered mechanical engineer with more than eight years of combined academic and industry experience. Led and participated in applied engineering projects such as designing of solar off-grid and irrigation systems, commissioning of bio digesters, development of pyrolysis units, and conducting of industrial energy audits.

I am a skilled individual who has a passion for designing prototypes. I am skilled at both 2D and 3D drawings. For most of my 3D models I use solidworks, I am still learning revit for integrating mech... Read more

I am a skilled individual who has a passion for designing prototypes. I am skilled at both 2D and 3D drawings. For most of my 3D models I use solidworks, I am still learning revit for integrating mechanical models to large structural assemblies. I am experienced at creating BOM for drawings and estimating costs required for project success. Most of my experience comes from the mining environment, modeling dams for processing chrome and plant components in general. I pay attention to detail and I am keen on achieving objectives within the set project timeline.

Alfred Timire Vuranda 2 Earls Avenue Windsor West Randburg Johannesburg South Africa , ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 25th March 2025 Dear Valued Client This letter is to express my i... Read more

Alfred Timire Vuranda 2 Earls Avenue Windsor West Randburg Johannesburg South Africa , ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 25th March 2025 Dear Valued Client This letter is to express my interest in joining your organization as your new Bim Coordinator on a remote basis or help you with drawings for you project. The last 6 years have encompassed my capabilities to work remotely from my home, helping clients as far as Australia. My hope is to become a part of your organization part time or full time, as I believe the world has become smaller. I believe I would be a great fit at your company or for producing drawings for your project because I have more than 20 years as a Draughtsman. My last role taught me pump rooms setup in refrigeration via Revit, and I gained the valuable skills of a chiller system. My time at as Freelancer also inspired me to develop a passion for chilled water systems. Combined with my Revit, Navisworks BIM 360 and ACC skills, this will make me an ideal candidate for the mentioned role. Given the opportunity, I can bring significant value to your corporation by utilizing my skill sets. I can do heat load calculations and select equipment. Produce precise drawings for Architectural buildings, HVAC, Fire, Wet Services, Medical gas and Compressed Air including Electrical drawings. I love following instructions and I am very attentive to detail. I work well under pressure. I attend coordination meetings with the project team. l do site visits to check construction compliance and produce as built drawings. I am willing to relocate. I am also more than capable of applying for my own work permit and visa. All I would require is an offer letter. I have attached a few of my documents. Please go through them. Thank you for your time, and I look forward to speaking more. Best, regards Alfred Timire Vuranda

Experienced Mechanical Engineering Draughtsman and Plater-Welder / Boilermaker with 13+ years in the mining sector and 4 years in FMCG. Skilled in Autodesk Inventor (sheet metal), 3D modelling, fabric... Read more

Experienced Mechanical Engineering Draughtsman and Plater-Welder / Boilermaker with 13+ years in the mining sector and 4 years in FMCG. Skilled in Autodesk Inventor (sheet metal), 3D modelling, fabrication, and laser scanning. Proven leadership as Acting Head of Draughting, with strong safety, compliance, and innovation focus. Seeking opportunities in underground mining and long-term growth into a Mechanical Design Engineer role.

Mechanical Engineering with 10+ years in Research doing Product Development using 3D Modeling and FMEA on Autocad, Plant Modeling and Design, and Building Services Design and Draughting.

Mechanical Engineering with 10+ years in Research doing Product Development using 3D Modeling and FMEA on Autocad, Plant Modeling and Design, and Building Services Design and Draughting.