Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my... Read more

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my career to be exposed to many disciplines and master them.

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes... Read more

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes working as an Apprentice Fitter and Turner in a Steel Manufacturing Company for over 2 years and then as a Junior Engineer at a Consulting Company for more than 6 years. Currently, I am employed as a Mechanical Draughtsman with MV Switchgear manufacturer starting June 2022. I am a lifelong learner and use my free time to acquire new skills through personal projects. My areas of interest include Mechanical Design, CAD Draughting, Finite Element Analysis, Structural Design, Scripting, and Automation. I am proficient in Autodesk Inventor, AutoCAD, Nastran, ANSYS, VB.NET(i-logic) and Microsoft Office

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surrounding... Read more

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surroundings quickly. I am always ready for new and exciting challenges that will allow me to apply my knowledge and abilities that I have gained through my studies and work experience. I strive for personal skill development and ensure that I keep improving my existing skills while constantly learning new skills. In my current position I am greatly exposed and experiencing the engineering aspect of providing functional products to international clients. I am heavily involved in research and development of new innovative products as well as working on the improvement of current products, utilizing testing results and simulations to enhance the performance and reliability of the products. Our products performing vital roles in the safety and protection of equipment and people we have to adhere to strict codes, regulations and procedure, each teaching me essential skills required in any engineering field. In my previous position I specialize in metrology solutions, undergoing training in GOM precision scanning as the main field of expertise. I also have come to terms with dealing with clients and providing them with solutions that satisfy their needs and requirements. Throughout my course work at the University and concurrent part time work, I have acquired a sound and overall knowledge accompanied with several professional skills related to leading edge engineering principals, tools and practices with emphasis on designing, building and testing of mechanical systems. I am proficient in the use of various automated solutions including current releases of Solidworks, Ansys and Star CCM+ as well as a variety of engineering machining tools.

In the ever changing world of CAD, where every line sparks innovation, I see design as a dance between art and engineering where precision meets beauty. With over 12 years of experience wielding too... Read more

In the ever changing world of CAD, where every line sparks innovation, I see design as a dance between art and engineering where precision meets beauty. With over 12 years of experience wielding tools like Inventor, Solid works, Blender, Photoshop and 3DS Max, I've mastered the art of turning concepts into reality. At my previous role, I spearheaded numerous projects involving mechanical design and manufacturing, to increase production and reduce downtime. My knack for solving complex technical puzzles—while keeping aesthetics and functionality in harmony—ensures every design is both practical and inspired. What makes me a standout in the CAD crowd is my blend of rigor and imagination. I’m as comfortable refining tolerances with engineers as I am presenting sleek renderings to stakeholders. I’m eager to contribute my skills to elevate your performance and quality within the strict timelines and budget.

I am a dedicated Industrial Engineer with strong technical, analytical, and hands-on engineering skills. With experience ranging from workshop fabrication and welding to design, simulation, data analy... Read more

I am a dedicated Industrial Engineer with strong technical, analytical, and hands-on engineering skills. With experience ranging from workshop fabrication and welding to design, simulation, data analysis, and tutoring, I bring a balance of practical and academic expertise. I have worked on real engineering projects involving steel structures, surveying, manufacturing processes, optimisation, and system design. I am proficient in Python, CAD tools (Fusion 360, Inventor, AutoCAD), ANSYS, X-Plane simulation, and Microsoft Excel (including VBA). I have also competed in national innovation competitions—finishing 3rd in both the TCS Sustainathon (2023) and Afretech AI Competition (2023)—showing my ability to solve problems creatively and work effectively in teams. I am energetic, reliable, and committed to producing high-quality work. My strengths include communication, teamwork, strategic thinking, and the ability to turn technical concepts into real solutions.

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python,... Read more

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python, C++) PLC programming (LabVIEW, Siemens, others) Embedded design (Atmel, Microchip) Simulations (FEA, Motion) CNC (hobbyist) Animation and rendering (Blender [in progress]) ===Experience=== Process automation, automotive, food, packaging industries, product development.

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any par... Read more

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any particular project and help you deliver Projects on time. - My main Field of stronghold is Mechanical Engineering, Architectural and Fire Protection and have 4 fulltime skilled inhouse draughtsman. - I also have a network of skilled draughtsman in different disciplines of Draughting ready to be engage with your projects. - I also have capacity to Plot drawings in large format paper size (A0) which makes it easy if you need to submit drawings in hard copy.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

I've Designed and Manufactured a large spectrum of the Engineering field. A few sectors include Mining, Solar Field, Film Industry, Food Industry as well as precision and general engineering. I am a f... Read more

I've Designed and Manufactured a large spectrum of the Engineering field. A few sectors include Mining, Solar Field, Film Industry, Food Industry as well as precision and general engineering. I am a firm believer that with first hand experience in manufacturing principles and processes, products are better designed not only for end user but also for ease of manufacture. This offers cost savings throughout the production cycle, saving money and most importantly time.

Mechanical engineering calculations CAD drawings (SolidWorks / AutoCAD/ ANSYS) Engineering reports & documentation Design verification & problem-solving Materials analysis

Mechanical engineering calculations CAD drawings (SolidWorks / AutoCAD/ ANSYS) Engineering reports & documentation Design verification & problem-solving Materials analysis

Mechanical Engineering with 10+ years in Research doing Product Development using 3D Modeling and FMEA on Autocad, Plant Modeling and Design, and Building Services Design and Draughting.

Mechanical Engineering with 10+ years in Research doing Product Development using 3D Modeling and FMEA on Autocad, Plant Modeling and Design, and Building Services Design and Draughting.

Experienced Mechanical Engineering Draughtsman and Plater-Welder / Boilermaker with 13+ years in the mining sector and 4 years in FMCG. Skilled in Autodesk Inventor (sheet metal), 3D modelling, fabric... Read more

Experienced Mechanical Engineering Draughtsman and Plater-Welder / Boilermaker with 13+ years in the mining sector and 4 years in FMCG. Skilled in Autodesk Inventor (sheet metal), 3D modelling, fabrication, and laser scanning. Proven leadership as Acting Head of Draughting, with strong safety, compliance, and innovation focus. Seeking opportunities in underground mining and long-term growth into a Mechanical Design Engineer role.

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing a... Read more

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing at a competition class Sailplane factory I'm knowledgable with turbojet and turbofans system analysis and design with focus on centrifugal compressors

35 Years of experience in Water Purification, Mining and Pyrolysis Gas Industry. Been involved in various big mining projects in the Gold and Iron Ore industry. 20 Years of experience with SolidWorks... Read more

35 Years of experience in Water Purification, Mining and Pyrolysis Gas Industry. Been involved in various big mining projects in the Gold and Iron Ore industry. 20 Years of experience with SolidWorks and Inventor, but the last 10 years just in SolidWorks, designing Structural, Mechanical, Process Plant Equipment, and various other equipment.

Alfred Timire Vuranda 2 Earls Avenue Windsor West Randburg Johannesburg South Africa , ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 25th March 2025 Dear Valued Client This letter is to express my i... Read more

Alfred Timire Vuranda 2 Earls Avenue Windsor West Randburg Johannesburg South Africa , ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 25th March 2025 Dear Valued Client This letter is to express my interest in joining your organization as your new Bim Coordinator on a remote basis or help you with drawings for you project. The last 6 years have encompassed my capabilities to work remotely from my home, helping clients as far as Australia. My hope is to become a part of your organization part time or full time, as I believe the world has become smaller. I believe I would be a great fit at your company or for producing drawings for your project because I have more than 20 years as a Draughtsman. My last role taught me pump rooms setup in refrigeration via Revit, and I gained the valuable skills of a chiller system. My time at as Freelancer also inspired me to develop a passion for chilled water systems. Combined with my Revit, Navisworks BIM 360 and ACC skills, this will make me an ideal candidate for the mentioned role. Given the opportunity, I can bring significant value to your corporation by utilizing my skill sets. I can do heat load calculations and select equipment. Produce precise drawings for Architectural buildings, HVAC, Fire, Wet Services, Medical gas and Compressed Air including Electrical drawings. I love following instructions and I am very attentive to detail. I work well under pressure. I attend coordination meetings with the project team. l do site visits to check construction compliance and produce as built drawings. I am willing to relocate. I am also more than capable of applying for my own work permit and visa. All I would require is an offer letter. I have attached a few of my documents. Please go through them. Thank you for your time, and I look forward to speaking more. Best, regards Alfred Timire Vuranda

innovative and creative. LnB protector , third level mechanical engineering student at UNISA FOUNDER AND HEAD DESIGNER AT BLACK3DESIGNS

innovative and creative. LnB protector , third level mechanical engineering student at UNISA FOUNDER AND HEAD DESIGNER AT BLACK3DESIGNS

I am a hard working person , and i am willing to learn, I have experiences in programming and designing of tool .I also have a certificate in Haas mashing , I am really a very hard worker and alw... Read more

I am a hard working person , and i am willing to learn, I have experiences in programming and designing of tool .I also have a certificate in Haas mashing , I am really a very hard worker and always and fast leaner , walk the extra mile for my work all i really need is a chance to show a company, I am based in Pretoria kind regards Barend Pieterse

I am a tool maker by trade with a passion for problem solving through intelligent design. I have Experience in both the automotive and mining Industries and have for the last 5 years worked for a com... Read more

I am a tool maker by trade with a passion for problem solving through intelligent design. I have Experience in both the automotive and mining Industries and have for the last 5 years worked for a company in multiple different roles who specialize in the repair and complete supply of industrial gearboxes.

Consulting Snr Engineering CAD Designer Drafter, Design Draughtsman, I am seeking work internationally or within African continent. I am a south African I will need sponsorship visa to work abroad.... Read more

Consulting Snr Engineering CAD Designer Drafter, Design Draughtsman, I am seeking work internationally or within African continent. I am a south African I will need sponsorship visa to work abroad. 20yrs in industry Design, Modelling Shop Detail Research & Design Projects , Prototypes , Tender designs , Reverse Engineering, Back Draft old designs , onsite work hands on. industries: Defence Armored Panzer, Mining ,Structural ,sheetmetal, Civil , architectural, as_built designs, piping isometrics hi - low pressure api, upvc, pvc / hdpe /ms/ss/ asme ,astm, iso, din, bs, plumbing heating water static-portable 20ft - 40ft , mine , filtration , industrial plant layouts equipment , telecom, container tankers, trailers ,sheet metal ,agri ,fmcg, conveyor systems , plant layouts, pid ,pfd , electronics wiring/ hookup/ loop/ wire harness diagrams 2d/3d Autodesk Autocad ,Inventor, 3d Plant, Advanced Steel, Structural Detailer, Revit, Solidworks, Solid Edge, Rhinoceros,Microstation, Draftsite, Pro Engineer, Smart Plant Foundation piping, structures, equipment,pid Designed details and prepared complete and accurate working plans for complex projects piping, electrical, structural, mechanical•Interfaced with departmental staff to identify equipment and materials requirements •Liaised with professionals and clients to agree on project brief and specifications •Determined layout of charts, strength of materials and complex engineering designs •Revised computer-aided designs and plans to comply with modified specifications •Provided technical guidance, design interpretation and direction to drafting staff •Delivered to tight deadlines and ensured strict compliance with quality standards •Coordinated with contractors and client representatives with regards to design changes •Maintained excellent working relations with all site personnel and subcontractors •Created and produced documents of all processes and procedures for the design •Managed and coordinated junior staff and trainees, providing ongoing support •Developed project briefs and monitored progress until final completion of project •Monitored quality assurance, costs and deadlines throughout construction project my contract finishes off 20 November 2021 with MWSPC in K.S.A. Turiaf. if you don't find candidate for my line of industry/work I am available from 2 months notice from period I accept job, contract offer My rates start at R385 to R485/ $25-$35 per hour Mark John Erasmus Consulting Engineering CAD Designer, Design Draughtsman Independant Contractor ,Sole Proprietor of Rockwell Design Mine Technician

My work experience includes project management, product support, marketing, training, design, 2D and 3D CAD, drawing office skills, and project management lifecycle.My expertice are but not limited to... Read more

My work experience includes project management, product support, marketing, training, design, 2D and 3D CAD, drawing office skills, and project management lifecycle.My expertice are but not limited to Fluid Power Industryincluding, Hydraulics, Pneumatics, Bulk Fuel and Lubrication.

We offer complete engineering solution including, conveyor design, structural design, turn-key fabrication of process equipment & Project management.

We offer complete engineering solution including, conveyor design, structural design, turn-key fabrication of process equipment & Project management.

I am a mechatronic engineering graduate from Stellenbosch University, South Africa. I have over 6 years of experience with Autodesk Inventor Professional through my studies, design competitions and pe... Read more

I am a mechatronic engineering graduate from Stellenbosch University, South Africa. I have over 6 years of experience with Autodesk Inventor Professional through my studies, design competitions and personal projects. I also have limited experience with Creo parametric thanks to two stints of vacation training that I undertook with company that designs armoured personnel carriers. I have won the Stellenbosch Mechanical and Mechatronic Final Year Project “Best Use of Inventor” Prize for design and modelling in Autodesk Inventor in 2019. I was also part of the winning team in the SqwidNet IOT University Challenge for design and prototyping of an anti-rhino poaching “smart collar” in 2018. Skills: • Conceptual design • 3d Modelling • Detailed drawings and B.O.M. • Animation of moving/rotating parts • Parameterised modelling of components Strengths: • Creative problem solving • Teamwork and collaboration • Attention to detail

I am a Technical Coordinator with 19 years of experience in production, manufacturing, and project management. I specialize in AutoCAD design, estimation, and operations management, with a proven abil... Read more

I am a Technical Coordinator with 19 years of experience in production, manufacturing, and project management. I specialize in AutoCAD design, estimation, and operations management, with a proven ability to lead teams, optimize processes, and improve production workflows. Over the last 11 years, I have successfully managed multiple projects, ensuring timely delivery and high-quality outcomes. Currently completing my diploma in Operations Management, I’m committed to continuous growth and plan to pursue Advanced Project Management and PMP certification. My key strengths include team leadership, strategic planning, and problem-solving, and I have a hands-on approach to improving efficiency and driving results in complex projects.

Founder of Advanced technologies in X-ray Transmission and Fluoresces systems as leading technology scientist in engineering and solutions provider with over 37 years of experience specializing in X-R... Read more

Founder of Advanced technologies in X-ray Transmission and Fluoresces systems as leading technology scientist in engineering and solutions provider with over 37 years of experience specializing in X-Ray Optical detection (XRF), X-Ray Transmission (XRT) technologies, Atomic Density Separation and advanced algorithm design. Accomplished in providing turnkey solutions for security, medical, mining, sorting, and scanning applications, including process plant design and advanced systems development. Proven expertise in cross-disciplinary engineering fields such as radiology, optical, electronic, software, mechanical, process, and metallurgical engineering. Recognized innovator with patented technologies that address mining, medical, and security challenges. Areas of Expertise • X-Ray Transmission (XRT) Technology: Advanced detection and identification systems for ore sorting. • Optical Detection Systems: Photon multiplier tube integration and high-speed detection for precision applications. • Algorithm Development: Design of advanced algorithms for real-time processing and decision-making. • Process Plant Design: Gravity sorting and air separation systems for mining operations. • Turnkey Project Management: End-to-end delivery of complex technological solutions. • Mining Applications: Advanced sorting solutions for diamonds, ore, and other high-value minerals. • Medical Scanning Solutions: XRT systems capable of identifying COVID-affected lung tissues. • Security Scanning Systems: Real-time detection of concealed weapons or contraband using XRT technology. • CAD Design: All projects and process designs achieved via internal CAD team, personally +30 years advanced PTC Wireworks CAD experience. Skills • Multidisciplinary Engineering (Mechanical, Optical, Radiology, etc.) • Advanced Algorithm Design and Development • Turnkey Project Management • Patent Development and Innovation • Mining Process Optimization • Pneumatic System Design • High-Speed Data Processing • Advanced CAD and Simulator Design