I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie... Read more

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory... Read more

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

I am a multidisciplinary technical specialist with experience in software development, CAD design, and digital media. I work with Python, MATLAB, automation, and 3D modeling to build practical, user-f... Read more

I am a multidisciplinary technical specialist with experience in software development, CAD design, and digital media. I work with Python, MATLAB, automation, and 3D modeling to build practical, user-focused solutions. My background includes developing a habit-tracking tool for neurodivergent users, collaborating on a wildlife tracker concept, and mentoring students. I also work in web design, graphics, video editing, and virtualization, combining technical skills with creative problem-solving.

Senior product designer and CAD specialist with 15+ years of experience turning product ideas, sketches, and rough concepts into practical 3D models, technical drawings, prototypes, and production-rea... Read more

Senior product designer and CAD specialist with 15+ years of experience turning product ideas, sketches, and rough concepts into practical 3D models, technical drawings, prototypes, and production-ready design files. I specialise in product design, 3D CAD modelling, electronics enclosures, injection-moulded parts, component packaging, ergonomic refinement, DFM, exploded views, and product visualisation. I have experience working with local South African fabricators and suppliers, as well as overseas suppliers and manufacturers in China. I can help with concept development, CAD modelling, design refinement, manufacturing drawings, supplier handover files, and realistic product renders. I have professional SolidWorks experience and can work from SolidWorks files if supplied. My current CAD delivery is mainly through Onshape and neutral formats such as STEP, IGES, STL, DXF, and PDF.

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and becom... Read more

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and become a fully integrated partner in your development project. Project Engineering Our involvement is entirely centered around the clients requirements. We are able to handle the product from start to finish Reverse Engineering Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. One type of reverse engineering involves producing 3-D images of manufactured parts when a blueprint is not available in order to re-manufacture the part. Re-Engineering Re-engineering of the existing engineered components and systems. Modifications of the existing design are done in order to enhance the look & feel, improve material usage and productivity.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I am a Industrial CAD designer currently doing side projects for fun. I worked on helping Fusion 360 develop their software and even aided in the design of military helicopter parts. I specialize in 2... Read more

I am a Industrial CAD designer currently doing side projects for fun. I worked on helping Fusion 360 develop their software and even aided in the design of military helicopter parts. I specialize in 2D drawing to 3D models. I am able to draught out drawings, send them in .pdf form.

Accomplished Mechanical Engineer with over 12 year’s invaluable experience of successfully overseeing and completing projects from conception to completion. Comfortable working in a fast-moving manufa... Read more

Accomplished Mechanical Engineer with over 12 year’s invaluable experience of successfully overseeing and completing projects from conception to completion. Comfortable working in a fast-moving manufacturing environment and ability to interact with departmental teams at all levels, customers and other stakeholders while possessing the skill to handle change and adapt to new situations. Knowledge of SolidWorks, Autodesk Inventor Mold Design Jigs and Tools design Steel Fabrication

I am a highly driven and experienced CAD draughtsman. I have over 13 years experience with AutoCAD and 6 years experience with Plant 3D, and Autodesk Construction Cloud software. I can create specific... Read more

I am a highly driven and experienced CAD draughtsman. I have over 13 years experience with AutoCAD and 6 years experience with Plant 3D, and Autodesk Construction Cloud software. I can create specifications, smart P&IDs, intelligent 3D piping models. I can generate Isometrics and construction GAs, elevations and detail drawings. Some of my most profound projects have been Total Sishen and Alrode Tank Farm, Fire upgrade and Gantry designs. Koeberg Nuclear power plant safety piping upgrade and OTGC vegetable oil storage facility in the cape town harbour.

I am a fully qualified draughtsman with an international qualification based in South Africa. I have over 10 years experience in drafting covering multiple disciplines. I work mainly in Solidworks and... Read more

I am a fully qualified draughtsman with an international qualification based in South Africa. I have over 10 years experience in drafting covering multiple disciplines. I work mainly in Solidworks and AutoCAD and am currently specializing in mechanical engineering, design and R&D. I have been in mechanical drafting for the last 6 years. I have experience in architectural and electrical drafting as well.

I'm a qualified Architectural Technologist with hands-on experience in residential, commercial, and estate development projects. I specialize in 2D drafting, 3D concept design, and construction docume... Read more

I'm a qualified Architectural Technologist with hands-on experience in residential, commercial, and estate development projects. I specialize in 2D drafting, 3D concept design, and construction documentation using AutoCAD, Revit, and SketchUp. With a background in both design and technical coordination, I’m comfortable working from concept to submission stage - including site planning, detailed layouts, council-ready drawings, and visual presentations. I understand the balance between creative design, budget constraints, and local building standards. Whether you need fast PDF-to-DWG conversions, permit-ready plans, or clean 3D renders for presentations, I deliver clear, accurate work - on time.

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an appro... Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an approach in hand drawn sketching and illustration skills. I’m very experienced with CAD programs such as Revit Architecture, Sketch-up, Zbrush, Substance Painter & Designer, Megascane, Solidworks, 3ds Max, Keyshot & Vray

EDMUND IAN COOPER Piping 3D Plant Designer with 35+ years’ experience delivering piping design solutions across oil & gas, refinery, offshore, and EPC project environments. I specialise in brownfield... Read more

EDMUND IAN COOPER Piping 3D Plant Designer with 35+ years’ experience delivering piping design solutions across oil & gas, refinery, offshore, and EPC project environments. I specialise in brownfield modifications, shutdowns, and turnaround maintenance, with extensive hands-on experience supporting offshore assets in Angola (Chevron CABGOC – Block 0 & 14) as well as refineries and fuel terminals across Southern and East Africa. Technically strong in AutoCAD Plant 3D, and CadWorx, AVEVA E3D (Intermediate). I produce accurate and construction-ready: • 3D piping models • Isometrics • General arrangements • As-built documentation I am comfortable working from P&IDs through to full 3D model development, including clash detection, material take-offs, and fabrication deliverables, with a solid understanding of ASME / API standards. Known for being a reliable, deployment-ready contractor, I integrate quickly into project teams and deliver under tight deadlines, particularly in live plant and shutdown environments. ________________________________________

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make yo... Read more

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make your Dream Project a reality by using my manufacturing design experience to develop your fantastic product cost-effectively. I design parts often used in the Professional and Manufacturing environment. Whether it is a single part of an assembly of numerous components, I will add value to your business. I have a crossover of skills that make me very effective. Here are some of my essential skills: • 3D Modeling (Solid Works 2021) • Manufacturing Drawings & Specifications • Design for Manufacturing (DFM) • Design for Assembling (DFM) • 3D Printing & Additive Manufacturing • Manufacturing Jiggs • Problem Solving • Critical Thinking About Me: I’m an honest person that enjoys working in the manufacturing environment that genuinely wants to help others around me. Working in this industry for the last 17 years has inspired me to start my Freelance with a new vision as a free-thinking individual to pursue new interests and add value to my customers. Productive collaboration drives me and gives me energy. I’ll take the time to gain a personal interest in your business, which will help me make significant contributions. I’m incredibly innovative, dedicated and pride myself to service excellence and attention to detail Have a nice day! Kobus Fourie Your innovative CAD Partner.

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.

 CAD - Autodesk Inventor, SolidWorks, FreeCAD  General understanding of G-code (CNC machine code)  Microcontroller design  Programming languages – Python, C/C++, C#, Ruby  Wiring diagrams & s... Read more

 CAD - Autodesk Inventor, SolidWorks, FreeCAD  General understanding of G-code (CNC machine code)  Microcontroller design  Programming languages – Python, C/C++, C#, Ruby  Wiring diagrams & schematics - Autodesk AutoCAD Electrical  Circuit & Printed circuit board (PCB) design – KiCAD, Eagle, DipTrace  Operating Systems – Linux (Ubuntu), Microsoft Windows  RF Protocols – WiFi, Bluetooth  Project management - MS Project  Matlab  MS Office  Firm understanding of computers and computer networking

I have 32 years experience in the engineering industry providing CAD and GIS assistance to professional engineers. I have 7 years experience converting 3D pointcloud scans into 2D CAD drawings or 3D R... Read more

I have 32 years experience in the engineering industry providing CAD and GIS assistance to professional engineers. I have 7 years experience converting 3D pointcloud scans into 2D CAD drawings or 3D Revit models, producing floor plans; sections and elevations for surveyors and architects. I have 29 years experience with ArcGIS and a Postgraduate Professional Diploma in GIS. Some examples of past projects : pipelines; water treatment plants; dams; urban planning; environmental assessments; as-builds of residential and commercial buildings.

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electron... Read more

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electronic hardware and control systems to film-quality robotic arms. I have also been responsible for multiple products from their concept phase all the way to production and integration. I have always had a love for electronics and creating and for Mechatronics or Robotic projects. I am a good communicator with a wealth of knowledge and ample CAD experience (Autodesk Inventor and Fusion 360, SolidWorks, Siemens nX).

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management

Passionate about advancing sustainable technologies and engineering solutions. I hold a Bachelor's degree in Mechanical Engineering from Eastern Mediterranean University, with hands-on experience in d... Read more

Passionate about advancing sustainable technologies and engineering solutions. I hold a Bachelor's degree in Mechanical Engineering from Eastern Mediterranean University, with hands-on experience in designing innovative projects like solar-powered robotics and optimizing PV systems. As President of the South African Student Society and active volunteer with AIESEC, I've honed leadership and cross-cultural communication skills. My goal is to leverage my technical expertise and leadership experience to drive impactful change in the engineering and renewable energy sectors.

I'm a SolidWorks user with 14+ years of experience, specializing in advanced surfacing techniques for consumer products, automotive components, composite part and mould design. Whether you're an indu... Read more

I'm a SolidWorks user with 14+ years of experience, specializing in advanced surfacing techniques for consumer products, automotive components, composite part and mould design. Whether you're an industrial designer with a vision, a startup building a prototype, or a manufacturer prepping for composite molding—I've got you covered. Services Offered: - Class-A surface modeling - Organic shapes and ergonomic forms - Reverse Engineering - Spline-driven surface development Conversion of rough or imported geometry to clean, manufacturable models Industries Served: - Industrial/product design - Automotive (panels, housings, concept parts) - Medical and wearable devices - 3D printing & prototyping Deliverables: - SolidWorks (SLDPRT/SLDASM) - STEP, IGES, STL, or native files

Hello, my name is Lucas and I am a young professional working at the University of Cape Town for the mechanical engineering department. My current position is mainly based on research projects regar... Read more

Hello, my name is Lucas and I am a young professional working at the University of Cape Town for the mechanical engineering department. My current position is mainly based on research projects regarding new production technologies. The main focus hereby is on theoretical analyses by using Ansys as a simulation tool. Since I am new and therefore couldn´t prove​ myself yet, I attached some of the projects I was doing the last years. Furthermore, I gained a lot of experiences in multicultural work environments during my studies in Germany, Denmark, and South Korea. During my 1,5 years at Robert Bosch GmbH in Stuttgart, I was working for the design and development department. Our branch was focused on new technologies for the food industry and packagings for the pharma industry. Summarised my main skills are: 1.) Ansys simulations 2.) Solidworks design 3.) Product development 4.) CAD/CAM 5.) Maths around mechanical Engineering If you have any questions regarding my skills don´t hesitate to ask. Lucas Lobmeyer