Hire Structural Analysis Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I am a mechanical engineering graduate with professional experience designing for startups and research labs. I also lead a robotics project which consists of designing a novel human hand shaped end e... Read more

I am a mechanical engineering graduate with professional experience designing for startups and research labs. I also lead a robotics project which consists of designing a novel human hand shaped end effector to mimic human dexterity. Additionally, I am certified as a SolidWorks professional from Dassault Systems.

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plan... Read more

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plans to architects and homeowners for permit and construction. I can provide a very economical design that save money and reduce construction time for the following type of structures:- post tension slabs piers foundations Wood framing and Steel framing Roofing Wind Bracing systems Also I can do observation on the foundation and the structural framing and provide letter to the city as required.

Worked primarily in automotive market. Designing the integration of EV powertrain and subsystems to convert conventional gas powered trucks to electric. Performed structural analysis, design for fabri... Read more

Worked primarily in automotive market. Designing the integration of EV powertrain and subsystems to convert conventional gas powered trucks to electric. Performed structural analysis, design for fabrication, and modular packaging and assembly structure. As well creation of bill of materials and work instructions for assembly and installation of components. Currently working on automotive aftermarket with a focus on custom classic car repowers gas or electric. As well as other aftermarket components.

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA s... Read more

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA software programs • Thorough understanding of design and analysis procedures, and proper material selection to ensure safety and optimal functionality of final product • Demonstrated proficiency in using SolidWorks, CATIA and Ansys through various school projects and past internship experiences • My capstone project required me to design a compact device, from a bulkier version, which harnessed nano aqueous ozone generator device components. The device intends to replace commercial detergents in the market with nano aqueous ozonated water to kill microbes • My internship at Albabtain Power and Telecommunication Co. saw me design components such as base flange, poles, and other accessories and assembled these components together, created drawing sheets ready to be used by fabricators, and worked on optimizing the components for optimal performance and cost reduction • At ITW, I used Ansys to compare the performance of a regular steel dowels used in concrete to a waveform shaped joint and conducted a full factorial DoE on the said waveform joint to determine the design with optimal results. Also, I suggested configurations and solutions to a production machine's rotary disc that failed due improper constraint based on intensive FEA analysis and design optimization

3D Cad Design Mechanical Design Electromechanical Design Structural Analysis Thermal Analysis Engineering Drawings Design For Manufacturing Product Development 3D Printing Machining -CNC / Manual Auto... Read more

3D Cad Design Mechanical Design Electromechanical Design Structural Analysis Thermal Analysis Engineering Drawings Design For Manufacturing Product Development 3D Printing Machining -CNC / Manual Autodesk Inventor / Nastran (FEA)

Iam pursuing my MASTER'S in CADCAM at CBIT College. My academic experience with CAD softwares is 3 years. At present iam working on a miniproject on design and structural analysis of R.C solar grasscu... Read more

Iam pursuing my MASTER'S in CADCAM at CBIT College. My academic experience with CAD softwares is 3 years. At present iam working on a miniproject on design and structural analysis of R.C solar grasscutter

Interior Design graduate with over three years of hands-on design experience and eight years of technical expertise in the construction industry as a Truss Technician. Bilingual and highly versatile,... Read more

Interior Design graduate with over three years of hands-on design experience and eight years of technical expertise in the construction industry as a Truss Technician. Bilingual and highly versatile, with a diverse portfolio spanning small residential projects to large-scale, high-profile developments. Proven ability to approach design and structural challenges with creative and practical solutions, including experience in interior and landscape design, structural alterations, and truss system engineering. As a Truss Technician, I specialize in the design, analysis, and implementation of truss systems, ensuring structural integrity, code compliance, and seamless integration with broader architectural plans. I am proficient in CAD software and structural analysis tools, and I collaborate effectively with architects, engineers, and contractors to bring efficient and innovative designs to life. Ambitious and detail-oriented, I’m now seeking a new challenge that leverages my unique blend of design and construction knowledge while continuing to grow both personally and professionally in the design field.

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater treatme... Read more

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater treatment, marine, automotive, machining, process piping, building & structural design.

Proactive and practical approach to Engineering Having interests in promotion of affordable housing systems Developed various Structural engineering solutions to connections Experienced in telecom in... Read more

Proactive and practical approach to Engineering Having interests in promotion of affordable housing systems Developed various Structural engineering solutions to connections Experienced in telecom infrastructural works over 25 years of senior management experience hands on experience in Structural and Finite Element design of steel Structures Developed camouflaged telecom poles and towers in Mauritius. Director at TK Lapeer LLC - Lapeer Michigan - March 2012 to Present Director at Advance Steel Structures India Private Ltd - Nanded, Maharashtra India - June 2005 to Present Director at Hestian Building systems Ltd - Port-Louis mauritius - January 2013 to Present Registered Professional Engineer of mauritius June 1985 to Present Registered to the Council of Professional Engineers of Mauritius.

Undergraduate student providing consultancy in structural engineering and project design.

Undergraduate student providing consultancy in structural engineering and project design.

My passion is product design; I love taking on challenging design problems and developing robust, cost effective solutions. I have 7 years of experience in mechanical design; in that time, I’ve worked... Read more

My passion is product design; I love taking on challenging design problems and developing robust, cost effective solutions. I have 7 years of experience in mechanical design; in that time, I’ve worked on projects ranging from candle molds and custom guitar picks to exhaust manifolds and lube pumps. I’m proficient in 3D CAD design, and I currently use Fusion 360 for freelance work. Specialties: • Design for fluid flow: Optimized geometry for pulsed (like an exhaust manifold) and steady state (like coolant passages) flow conditions. Do not currently possess CFD analysis capability for freelance work, but have years of experience optimizing flow passages for high performance applications, and can apply that experience to any fluid design project. • Design for 3D printing: There is a common misconception that 3D printers can create any shape that can be imagined. While 3D printing can create shapes that are impossible with traditional manufacturing techniques, it has its own, unique limitations. Without a solid understanding of these limitations and how to account for them, 3D printing projects can become very frustrating very fast. • Design of mechanisms: Designing a system of parts that work together requires a considerable body of knowledge on top of simple part design. Assemblies must be robust against manufacturing variation, assembly variation, and have appropriate surface finishes in order to ensure that the parts will always go together and function as intended. • 2D drawings and GT&T: In most cases, the 2D drawing is still the legal document that defines the part; developing a drawing with a robust datum structure and proper tolerances is a critical part of turning an idea into a producible reality. Other proficiencies: • Design for sand casting: material selection, optimizing parting lines, core design. • Seal design: radial and face seal o-ring interfaces, as well as gasket sealing flanges. • Bolted joint design: proper bolt size and grade selection, grip length, thread engagement.