Hire Mechanical Engineer Designers near California, United States

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

I am a mechanical engineer/drafter with experience in various industries. I'm excited to be launching my freelance drafting business using SolidWorks.

I am a mechanical engineer/drafter with experience in various industries. I'm excited to be launching my freelance drafting business using SolidWorks.

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the... Read more

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the potential to limit my future well-being. The decision to pursue a degree in mechanical engineering was a logical solution to replicate this enjoyment from working on engines, but also a decision that would provide better future career opportunities. My academic endeavor was less-than conventional, as I was also responsible for a mortgage and funding my own tuition. Although I am married, I am not the type of individual to rely entirely upon my wife with the burden of financial assistance. An unfortunate result of my stubbornness is the notion of accepting an internship, as it could provide an obvious educational value but lacked necessary financial requirements. My participation in on-campus race car teams provided the perfect opportunity to obtain design experience, and to promote these designs in a competitive environment.

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contr... Read more

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contract Roles

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project... Read more

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project from concept to supply chain design and procurement strategy, and would love to do the same for you.

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photoni... Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

I am a graduate of Mechanical Engineering, I specialize in Product Design, Machine Design and Engineering Simulations using ANSYS Mechanical & Fluent.

I am a graduate of Mechanical Engineering, I specialize in Product Design, Machine Design and Engineering Simulations using ANSYS Mechanical & Fluent.

Professional Mechanical Engineer with over 12 years of experience working in Aerospace and Medical Device Companies as a Design and R&D engineer with high proficiency in various CAD software including... Read more

Professional Mechanical Engineer with over 12 years of experience working in Aerospace and Medical Device Companies as a Design and R&D engineer with high proficiency in various CAD software including AutoCAD, CATIA, NX and Solidworks. I have a passion for designing and realizing innovative products as a hobby.

I provide mechanical design services for custom automation equipment, fixtures, jigs, machine structures, and product components. My services include 3D CAD modeling, 2D manufacturing drawings, assem... Read more

I provide mechanical design services for custom automation equipment, fixtures, jigs, machine structures, and product components. My services include 3D CAD modeling, 2D manufacturing drawings, assembly drawings, fixture and tooling design, BOM preparation, component selection, and design optimization for manufacturing and assembly. I have experience in automation equipment projects for automotive, 3C electronics, and new energy applications. I focus on clear, practical, manufacturable, and cost-effective design solutions.

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional... Read more

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional (CSWP). I have experience in part modeling for molded, machined sheet metal and die cast parts. I also have experience in surface modeling and assemblies and engineering drawings. I am also capable of aiding in material selection through calculation and/or simulation.

I'm a mechanical engineer with 2.5 years of experience in the construction design industry, focused on HVAC system design and documentation. I’ve worked extensively with AutoCAD, Revit, SolidWorks, an... Read more

I'm a mechanical engineer with 2.5 years of experience in the construction design industry, focused on HVAC system design and documentation. I’ve worked extensively with AutoCAD, Revit, SolidWorks, and Fusion 360 — but for freelance projects on CadCrowd, I’ll be offering my services exclusively in Fusion 360. My strengths lie in 3D modeling, design documentation, and producing clean, accurate CAD files. I bring an engineering mindset to all my work, with a strong understanding of real-world manufacturing and design constraints. I also have a background in FEA using SolidWorks and plan to expand into offering simulation services in the future as I continue retraining. If you need Fusion 360 modeling support — whether it’s for parts, assemblies, or drawing packages — I’d love to collaborate and help move your project forward with precision.

Easy going & ready to work. -Knowledgeable in SolidWorks -Novice in CATIA -Successfully modeled an "Autonomous Sheep Pen" for a Capstone Design Project; Client: California Ag Solutions -Background in... Read more

Easy going & ready to work. -Knowledgeable in SolidWorks -Novice in CATIA -Successfully modeled an "Autonomous Sheep Pen" for a Capstone Design Project; Client: California Ag Solutions -Background in Mechanical Engineering, Writing Minor

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic... Read more

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic environments, I stay focused on delivering solutions that exceed expectations. Let's drive success together.

M.Eng. in Mechanical Engineering candidate at Beijing Institute of Technology, specializing in active vibration control and multiphysics propulsion. With a strong foundation in aerospace engineering,... Read more

M.Eng. in Mechanical Engineering candidate at Beijing Institute of Technology, specializing in active vibration control and multiphysics propulsion. With a strong foundation in aerospace engineering, I excel in transforming complex problems into innovative solutions through Sketch-To-CAD design. An analytical problem-solver with experimental and programming expertise. Passionate about sketching/drawing and proficient in Solidworks/FreeCAD (2D/3D modeling). I can turn ideas into concrete product. Accomplishments and Projects : - Contributor to NeboEYE-1, a lunar water detection project selected for the 11th China Graduate Future Flight Vehicle Innovation Competition (2025). - Designed and validated a 6-DoF Active Vibration Isolation System (AVIS) controller, earning 3rd prize at the 3rd IS-Academic Forum for Outstanding International Students at USTB (2025). - Conducted numerical simulations of laser ignition for hybrid rocket propulsion using ANSYS Fluent, focusing on slab burners (2023). - Developed a data acquisition system for dynamic testing of Senegalese Air Force helicopters Mi17/Mi35 using Python and Arduino (2021)

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, ste... Read more

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, steel and aluminum weldments, steel and aluminum forgings, aluminum and magnesium die castings, aluminum forgings, sheet stamping and forming, and powdered metal. I also have extensive experience in industrial design.

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

Motivated and detail-oriented Mechanical Engineering professional with a strong background in CAD design, materials, and product development. I specialize in transforming ideas into precise 3D models... Read more

Motivated and detail-oriented Mechanical Engineering professional with a strong background in CAD design, materials, and product development. I specialize in transforming ideas into precise 3D models and engineering solutions, from concept to detailed production drawings. With proven expertise in SolidWorks, FEA, and static/dynamic analysis, I deliver designs that are both innovative and manufacturable. I’m passionate about collaborating with clients to solve complex challenges, create clear technical documentation, and develop efficient, cost-effective solutions that drive continuous improvement.

Mechanical Engineering student at SJSU 3 years experience in Solidworks - Mechanical design 2 years experience with 3d printing - Optimizing print settings/ troubleshooting printer problems

Mechanical Engineering student at SJSU 3 years experience in Solidworks - Mechanical design 2 years experience with 3d printing - Optimizing print settings/ troubleshooting printer problems

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: En... Read more

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: Engineering Materials, Statistics & Probability, Manufacturing Operations, Dimensional Analysis, Modelling, 3D CAD, Test Analysis, Communication, Prototype Development, Design Improvements and Optimization, Machining and Fabrication Process, Project Management, Materials Research, Troubleshooting, Fabrication, Modeling Contact Daniel regarding design and manufacturing engineering opportunities.

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the... Read more

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the opportunity to work with different companies which gave me the ability to learn about diverse products and manufacturing processes. Actually working with a small company in North San Diego as R&D lead mechanical engineer. In additionI am offering my services to people who are looking to make a modification to an existing product, to reverse engineer a component, generate file for 3D printing, generate drawing for quote or drawings for patent submission. I utilize 3D software from which I extract parametric drawings and files I can use to 3D print. Please don't hesitate to contact me for a quick preliminary pricing.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite... Read more

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite Element Modeling (CATIA, ABAQUS, LS-DYNA) for both composite and homogeneous materials. Hands on experience with manufacturing processes for Aluminum, Composites, and metal bonded products.

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of... Read more

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of engineering expertise to deliver premium consulting services, encompassing everything from design to creation of concept-to-manufacture schematic drawings, FEA analysis, and comprehensive Design for Manufacturability (DFM) insights. My proficiency extends to various SolidWorks certifications. With a proven ability to excel across a wide spectrum of industries, I invite potential clients to peruse my portfolio. I look forward to connecting with you and/or your company to understand your specific goals and collaborate on tailored solutions that will drive your success to new heights.

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product... Read more

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product engineering, from feasibility analysis and cost estimation to prototyping and production. Notable achievements include designing a self-balancing three-wheel vehicle, engineering the Will.I.AMG for the 2022 Miami F1, and developing the Nikola One hydrogen-electric Class-8 truck. Markus has a proven ability to lead projects from concept to completion, leveraging skills in CAD design, kinematic layout, and advanced manufacturing techniques. He has successfully collaborated with global stakeholders and managed teams across diverse projects, including the development of the Fisker Karma Sunset retractable hard top, Aptera’s mass-production-ready body redesign, and the high-performance LaMarc hypercar. Fluent in German, Markus also brings extensive experience working with renowned brands like BMW, Audi, and Fisker Automotive. He holds a Mechanical Engineering degree and excels in program management, problem-solving, and efficient manufacturing practices. Whether leading large teams or contributing as a hands-on innovator, Markus consistently delivers cutting-edge engineering solutions that align with business goals and customer expectations.

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

I’m a mechanical engineer with hands-on industry experience in CAD design, manufacturing processes, and product development, from early concept sketches to functional 3D models and production-ready do... Read more

I’m a mechanical engineer with hands-on industry experience in CAD design, manufacturing processes, and product development, from early concept sketches to functional 3D models and production-ready documentation. At AMADA America, Inc., I analyzed and improved manufacturing workflows, collaborated across engineering teams, and developed detailed CAD models and technical documentation for complex machinery. I’ve supported product updates, process optimization, and quality improvements across multiple departments, contributing to faster production times and more accurate designs. I specialize in 2D drafting and 3D CAD modeling, with deep knowledge of design for manufacturability (DFM), geometric dimensioning and tolerancing (GD&T), and prototype-ready documentation. Whether you need an idea transformed into a solid model or full technical drawings for manufacturing, I bring both engineering insight and creative problem-solving to the table. 🔧 Core Services & Skills: - 2D CAD drawings and drafting (for documentation or production) - 3D modeling using SolidWorks - Concept-to-prototype development for parts or products - Mechanical assemblies, weldments, and exploded views - STL/STEP file prep for 3D printing or CNC - Stress analysis, tolerancing, and material consideration - Technical drawing updates for existing machines or components - Photorealistic rendering for presentations and investor decks 🏆 Key Experience: - Created 2D & 3D documentation for over 10 machine types, collaborating with welders, QA, and R&D - Led work studies and implemented process improvements to boost production efficiency - Developed CAD models and welding specs for heat-treated materials - Designed and built a fuel-efficient competition vehicle in the Shell Eco-marathon - Prototyped mechanical parts using 3D printing, CNC machining, and laser cutting in academic labs - Reverse-engineered and improved mechanical designs as part of hands-on coursework ✅ Why Choose Me: - Engineering-driven design mindset backed by real-world manufacturing experience - Highly proficient in CAD tools and technical documentation - Comfortable translating rough ideas or sketches into ready-to-use models - Detail-focused, collaborative, and deadline-oriented - Passionate about design, innovation, and turning ideas into engineered reality Let’s bring your concept to life, whether it’s a new product, a design update, or a manufacturing model. I’m here to support every stage of your project from sketch to prototype. Send me a message and let’s get started!