Hire Mechanical CAD Engineering Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves,... Read more

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves, Pneumatic/Hydraulic Cylinder and Linear Sensors using CAD, FEA and Engineering analytical tools. My work include 3D Design / Modeling of parts and assemblies, 2D Manufacturing Drawings (close fit tolerances, geometric tolerances, stack up analysis), Developing / Evaluating / Optimizing Prototypes, Selecting suppliers. My project management, communications and engineering skills will be a great asset to complete your projects with high quality service in a timely manner.

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thou... Read more

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thought it would be great to share my knowledge. As the saying goes, "If you're great at something, don't do it for free." Look forward to working with you!

The past few years I have been working as a Mechanical Engineer where my area of expertise is electronics packaging. I have a history of success taking products through all phases of development; from... Read more

The past few years I have been working as a Mechanical Engineer where my area of expertise is electronics packaging. I have a history of success taking products through all phases of development; from concept to prototype, to manufacturing. I have a history of success in product design, prototypes, and preparation for manufacturing. I have a successful record of bringing projects through all phases of development including customization and troubleshooting. With over 8 years of Mechanical Engineering experience, I have worked in design and research and development roles doing various 3D CAD modeling and drawings. I have also worked in the machine shop programming CNC's and in production manufacturing environments. My area of expertise is electronics packaging, power junction boxes, EMI protected designs, sheet metal boxes, hogged out Al boxes, custom enclosure, or off the shelf reworks. Let me know how I can help you get your project done; I look forward to hearing from you.

I graduated from the University of Arkansas in the Spring of 2016 with a BS in Biomedical Engineering with Pre-Med distinctions. I hold minors in English, History, and Mathematics. While attending Uni... Read more

I graduated from the University of Arkansas in the Spring of 2016 with a BS in Biomedical Engineering with Pre-Med distinctions. I hold minors in English, History, and Mathematics. While attending University I contributed part time as an Undergraduate Research Assistant for Dr. Narasimhan Rajaram Ph.D. in the development of optical imaging instrumentation and biomarkers for cancer diagnosis and monitoring tumor response to therapy. My primary curriculum focus included Neurology, Nano technology, Advanced Prosthesis, and integration of bio technologies involving the neurological pathways, 3D design, 3D printing, CAD drafting, Structural engineering, and Mechanical Engineering techniques. I currently hold the position of Design Engineer for Berkley Industries. My primary focus is developing new and innovative mechanical and Industrial devices for a myriad of clients for a variety of needs. I previously held the position of Principle Design Engineer for R&R Solutions in Gravette Arkansas. I oversaw in charge all engineering projects, and custom design projects from the initial concept to the production run. I had the privilege of holding a position with NX Utilities as the Regional Quality Engineer for the Midwest. I planned and directed activities concerned with development, application, and maintenance of quality standards for industrial design , materials, and products related to the fiber optic network pathways for major utility conglomerates. Before my NX days, I held the title of Engnieer/Designer for Advanced Lightening Technologies. I lead a team focused on R&D of advanced lightning protection systems using CAD and scale model simulations. In my spare time I enjoy being with my family, traveling to new places, country dancing, playing as many sports as possible, and the occasional Netflix binge.

6+ years of design/analysis/test/fabrication experience in the civil, petroleum, and aerospace industries. Currently working as a mechanical/aerospace engineer designing R&D prototype aircraft. My wor... Read more

6+ years of design/analysis/test/fabrication experience in the civil, petroleum, and aerospace industries. Currently working as a mechanical/aerospace engineer designing R&D prototype aircraft. My work allows me to design, build and test parts using exotic materials. I am also a 3D Print hobbyist.

I'm a French student, I have done Mechanical Engineering, Design and Interior design. I have more than 5 years of experience with SolidWorks, Autocad and Catia V5. I have worked in different Engineeri... Read more

I'm a French student, I have done Mechanical Engineering, Design and Interior design. I have more than 5 years of experience with SolidWorks, Autocad and Catia V5. I have worked in different Engineering companies and know how to deal with requirements and technical problems. Hope I can help you the best I can !

Born, raised, and educated in Portugal, Europe. Emigrated to the United States in 1985, now an American citizen. Married, two daughters, two grand-daughters.

Born, raised, and educated in Portugal, Europe. Emigrated to the United States in 1985, now an American citizen. Married, two daughters, two grand-daughters.

We are a collaboration of engineers dedicated to providing the most efficient resource for your engineering and design needs. Whether you already have an engineering team and need additional capacity... Read more

We are a collaboration of engineers dedicated to providing the most efficient resource for your engineering and design needs. Whether you already have an engineering team and need additional capacity or are an inventor with a new concept you wish to bring to market, Overflow Engineering is a valuable asset to supplement your team!

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

19 years of design experience utilizing Creo and Solidworks.

19 years of design experience utilizing Creo and Solidworks.

Athalia Solis is a first generation Latina college graduate from the University of California, Merced with a degree in Mechanical Engineering. Having begun her academic career at Rio Hondo College, sh... Read more

Athalia Solis is a first generation Latina college graduate from the University of California, Merced with a degree in Mechanical Engineering. Having begun her academic career at Rio Hondo College, she discovered her passion for engineering after accidentally taking a hand drafting class for engineering. After receiving three associates degrees and an architectural drafting certificate, Athalia transferred to UC Merced. At UC Merced Athalia was exposed to various disciplines of engineering through her coursework, research, internships and Award Winning Senior Project. Her work includes solar thermal energy, photovoltaic energy, materials, strengths, waste handling, and electrical engineering. She has been recognized for her hard work, leadership and expertise having received the Entrepreneur in Training Scholarship Award, Scholarship to Aid Rio STEM Student Recipient (STARR), and Innovate to Grow – Top Finisher. Moving forward, Athalia is looking to apply her passion of learning towards designing solutions for complex engineering problems. Striving to grow and demonstrate her abilities, Athalia is working towards obtaining her Engineering in Training. In addition, she would ultimately like to earn a Master's Degree in a specialized field of engineering.

Welcome to my page! I am a Mechanical Engineer living and working in Minneapolis, Minnesota. I currently work as a manufacturability analyst, for a rapid manufacturing and prototyping company. I speci... Read more

Welcome to my page! I am a Mechanical Engineer living and working in Minneapolis, Minnesota. I currently work as a manufacturability analyst, for a rapid manufacturing and prototyping company. I specialize in CNC Machining, 3D printing, and Injection Molding. I have a Mechanical Engineering degree from Iowa State University. I have been doing CAD and CAM professionally for 5 years now. My passion is design, and I love creating new concepts with others. Excited to work with you on a new design!

I am in high school and do 3d modeling as a hobby. I’ve doing it for about a year now and can say that I’m progressing quite well. Sense this is just a side thing for me I will be charging a low price... Read more

I am in high school and do 3d modeling as a hobby. I’ve doing it for about a year now and can say that I’m progressing quite well. Sense this is just a side thing for me I will be charging a low price. I am currently studying drafting and algebra 2. I have no problem talking directly to a client so that I can create the perfect design for their needs and wants.

I have made the most of every opportunity to study under expert craftsmen, inventors, product designers, doctors, and engineers to hone his ability to bring increasingly more complex new products to r... Read more

I have made the most of every opportunity to study under expert craftsmen, inventors, product designers, doctors, and engineers to hone his ability to bring increasingly more complex new products to reality. This includes working with some of the foremost physicians tackling difficult challenges in current and next generation LVADs, artificial hearts, blood pumps, and other highly complex class III medical devices. Products I have designed and built are in Times Square, the Disney Parks, the Smithsonian, and implanted in people around the world. To date, I am named as inventor on a half dozen granted and pending patents, including core technologies in products for companies such as Baxa (now Baxter), Thoratec (now Abbott), and Covidien (now Abbott). I started my engineering training with a B.S. Engineering Degree, with a Mechanical Specialty from the Colorado School of Mines. I ontinue my education by working with many Industry & Trade Associations, University Programs, Business Groups and start-up Incubators. I also regularly attend major conferences, training programs, and other industry events in design and related fields including simulation & medical conferences specific to class III active implantable devices and blood pumps. My passion is to improve the world by blending user-focused design, tenacity, and old-world craftsmanship with an intimate understanding of the latest technologies. I exist at the intersection of the digital revolution, old world craftsmanship, and user-focused design. Which is why I always ask - what can I make for you? "… I am, and ever will be, a white-socks, pocket-protector, nerdy engineer — born under the second law of thermodynamics, steeped in the steam tables, in love with free-body diagrams, transformed by Laplace, and propelled by compressible flow. As an engineer, I take a substantial amount of pride in the accomplishments of my profession." - Neil Armstrong

I have over 6 years experience creating 3D models and 2D drawings using the latest CAD/CAM software. I am experienced in converting 2D legacy blueprints into 3D models, design of tooling for the aeros... Read more

I have over 6 years experience creating 3D models and 2D drawings using the latest CAD/CAM software. I am experienced in converting 2D legacy blueprints into 3D models, design of tooling for the aerospace industry, mold design for injection molding biomedical industry, design of one off prototypes for R&D, and new product development.

I've been doing 2D and 3D design work since 2009. I have experience in a wide variety of fields, such as architectural, mechanical, electrical, and many more. I primarily work with Autodesk Inventor... Read more

I've been doing 2D and 3D design work since 2009. I have experience in a wide variety of fields, such as architectural, mechanical, electrical, and many more. I primarily work with Autodesk Inventor and Autocad but I have experience with other software as well.

I have always enjoyed tinkering with things. I remember my first success: In sixth grade I took apart a fully-functional remote controlled car and after putting it back together I was so excited that... Read more

I have always enjoyed tinkering with things. I remember my first success: In sixth grade I took apart a fully-functional remote controlled car and after putting it back together I was so excited that it actually worked! That success started a lifetime in the engineering world. I went on to get a BS in Aerospace Engineering at the University of Minnesota. I was fortunate in my career to be exposed to many parts of the manufacturing world - concept design, prototyping, design-for-manufacturing, material selection, metal and plastic molded part design, quality-by-design, 6-sigma, 5S, manufacturing machinery and processes, CAD 3-D design, CFD and FEA, and project management. Now I'm applying my skills to your project. Whether you're project is early concept, manufacturing launch, or somewhere in between, I will apply my education, experience, and creativity to your project, on-time and within budget - Mathew Torgerson

I have been working as a mechanical engineer / design engineer for the last 10 years. Over this time period I have worked in numerous different fields. I have designed tanning beds, black-hawk helicop... Read more

I have been working as a mechanical engineer / design engineer for the last 10 years. Over this time period I have worked in numerous different fields. I have designed tanning beds, black-hawk helicopter parts, semi-truck tarp systems, aircraft insulation, race car parts, test rigs for all sorts of automotive parts, diesel engine/truck parts. I hold a patent on a motion system I developed for scale model wind tunnel testing that is still in use today.

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master... Read more

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master builder. Shortly after, I joined an architectural firm on which I also developed a taste for construction and its intricacies. I was exposed to everything from blueprints to the production of scale models (maquettes). During this time, I also obtained a certificate as a Solar Project Designer through Censolar. I also worked in plumbing designing water systems for irrigation, pools, residential sanitary water, and a few other projects. My interest in design had just begun and there was a long and interesting road ahead of me. Years later in 2003, I moved to the US where I married my wife, with whom I share a beautiful kid. Moving here opened many doors and I dove into these opportunities head first. In 2004 I joined ACC and attained an AA in Mechanical Design, and from then on I have developed upon that skill. My design exposure since moving to the US has been as follows: * National Instruments, involved in virtual instrumentation design. * Alpha Slip Rings, designing custom commutators for oil drilling, radars, etc. * Sisu Devices, robots and industrial automation. * Biomedical design for Global. * Thermal tooling and mechanical solutions design for Intel, CNC machining, and where I also lead the board repair lab.

Experienced Project Engineer working in the cosmetic packaging and plastics industry. Skilled in Computer-Aided Design (CAD), design of plastic injection molded parts, Microsoft Office suite, and proj... Read more

Experienced Project Engineer working in the cosmetic packaging and plastics industry. Skilled in Computer-Aided Design (CAD), design of plastic injection molded parts, Microsoft Office suite, and project management. Strong engineering professional with a Bachelor of Science (B.S.) focused in Mechanical Engineering from New Jersey Institute of Technology.

15 + years of experience with a solid background in product development, design, and finite element analysis. Demonstrated ability to multi-task and meet stringent deadlines while producing cost reduc... Read more

15 + years of experience with a solid background in product development, design, and finite element analysis. Demonstrated ability to multi-task and meet stringent deadlines while producing cost reduced design solutions for innovative products. CORE COMPETENCIES • Microsoft Project 2010 • 3D Surfacing • 3D Electrical Design • Sheet Metal & Stamping Design • Casting Design • Motion Analysis • Cost Analysis • Root Cause Analysis • Project Management