Hire CAD Design Designers near Georgia, United States

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I ha... Read more

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I have been in Mechanical Design using Solid Works & Solid Edge. I can produce 2D prints using DraftSight (AutoCad clone). I can also produce 3D models using the aforementioned programs. I can also produce photo-realistic renderings out of CAD models. I recently started my own Freelancing business called Scott Lester Drafting & Design. On the side, I teach Engineering Design at the same community college I graduated from.

With over 15 years of international experience in architecture, structural engineering, and advanced 3D BIM modeling, I bring a unique combination of technical expertise, creative design vision, and p... Read more

With over 15 years of international experience in architecture, structural engineering, and advanced 3D BIM modeling, I bring a unique combination of technical expertise, creative design vision, and practical project delivery skills. Throughout my career, I have worked on diverse projects across residential, commercial, industrial, and mixed-use developments, gaining deep insight into global building practices and modern engineering standards. My professional background bridges both architectural design and structural solutions, allowing me to approach projects holistically. I focus on creating designs that are not only visually compelling but also structurally sound, cost-efficient, and sustainable. By integrating architecture with engineering principles, I ensure that every project balances aesthetics with performance and durability. One of my key strengths is proficiency in Building Information Modeling (BIM). I specialize in developing accurate and detailed 3D BIM models that integrate architecture, structure, and MEP systems. These models enhance collaboration between stakeholders, reduce design conflicts, and support efficient project management from concept to construction. Using platforms such as Revit, Navisworks, and other industry-standard tools, I provide precise models that improve visualization, quantity take-offs, scheduling, and overall decision-making. Over the years, I have led and collaborated with international teams, adapting to different building codes, cultural contexts, and client expectations. This global exposure has sharpened my ability to deliver designs that respond to diverse climates, local practices, and community needs, while maintaining high standards of accuracy and innovation. Key areas of expertise include: Architectural design for residential, commercial, and mixed-use developments. Structural analysis and design in steel, concrete, and timber systems. 3D BIM modeling for architecture, structure, and interdisciplinary coordination. Project management, scheduling, and cost estimation. Sustainable design approaches aligned with modern construction trends. I take pride in combining creativity with technical precision. Whether developing an elegant architectural concept, performing detailed structural calculations, or coordinating a full BIM model, my goal is to deliver solutions that add value and efficiency to every project. Clients and partners trust my ability to listen, adapt, and provide clear, actionable insights that keep projects moving forward smoothly. Looking ahead, I remain committed to advancing the use of BIM technology, promoting collaborative design methods, and contributing to projects that positively shape our built environment. My mission is to support clients, architects, and developers with reliable expertise that transforms ideas into reality—safely, sustainably, and beautifully.

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

I now have Onshape(BETA)!!! I can put my SolidWorks and Pro/E CAD skills to use!! Find me on LinkedIn!

I now have Onshape(BETA)!!! I can put my SolidWorks and Pro/E CAD skills to use!! Find me on LinkedIn!

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

Certified Solidworks Professional (2013) Experience with: AutoCAD SolidWorks Sketchup MasterCAM BobCAD

Certified Solidworks Professional (2013) Experience with: AutoCAD SolidWorks Sketchup MasterCAM BobCAD

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

I have been 2D and 3D drafting for 10+ years. I have experience in entertainment, home renovation (non structural), furniture etc.

I have been 2D and 3D drafting for 10+ years. I have experience in entertainment, home renovation (non structural), furniture etc.

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering res... Read more

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering results through hard work independently and also through collaborations will enable me to make valuable contributions to your projects and initiatives. I am confident that my technical knowledge, coupled with my passion for engineering, make me a strong candidate for your projects

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawin... Read more

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawing sets using AutoCAD and Revit, with a strong understanding of construction methods, scale, and code-driven documentation. In addition to drafting, I can support design development—helping translate early concepts, markups, or schematic ideas into clear, buildable drawings that align with project constraints and code requirements. My work focuses on plans, elevations, sections, details, and revisions based on redlines, field notes, or review comments. I’m often brought in to turn rough inputs into organized, professional documentation that’s easy to review, permit, and build from.

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

Hi! I have spent the last few years striving to attain the most diverse skill set available to me in my studies at Georgia Tech. Consequently, I can offer a unique, holistic perspective and approach w... Read more

Hi! I have spent the last few years striving to attain the most diverse skill set available to me in my studies at Georgia Tech. Consequently, I can offer a unique, holistic perspective and approach when confronting a design problem. I have participated in a wide variety of projects across several disciplines including optics, control systems, computer vision, aerospace engineering, and much more. I am extremely excited whenever I am confronted with a new problem and enjoy immersing myself into new areas of practice. I look forward to working with you!

I have designed over 4000 Custom Homes throughout the US and Bahamas. The majority of my homes are located in Florida and Georgia. The square footage ranges from 2,000 square feet to 15,000 sq.ft.wit... Read more

I have designed over 4000 Custom Homes throughout the US and Bahamas. The majority of my homes are located in Florida and Georgia. The square footage ranges from 2,000 square feet to 15,000 sq.ft.with a variety of designs. A strong emphasis is on design, structure and code compliance. Client satisfaction is the goal of all my designs. I have been in the Design and Plans business for 30 years.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Principal at iD2 Products, a consulting firm that offers high-quality and innovative solutions for product design and development across multiple industries. I have over 25 years of experience... Read more

I am a Principal at iD2 Products, a consulting firm that offers high-quality and innovative solutions for product design and development across multiple industries. I have over 25 years of experience in industrial design, 3D CAD, graphical design, mechanical engineering, and team leadership, and I have successfully delivered products from conception to production that meet the needs and expectations of clients and end-users. My portfolio includes products in the consumer, commercial, and medical device sectors, such as the LR6 LED Downlight, which won an IDEA Silver Award for its energy efficiency, light quality, and easy installation, and the EmitBio Device, which uses LED technology to treat viral infections. I also hold 100+ patents for LED lamps and other inventions that demonstrate my creativity and problem-solving skills. My mission is to create products that are not only functional and aesthetically pleasing but also disruptive and impactful. If you need help designing or developing a product, reach out, and we can discuss the opportunity. Visit us at id2products.com

I have been drawing in 2d CAD (Autocad) since 2000. I started drawing in Solidworks 2007. I have done a lot of reverse engineering, Converting 2d files to 3d. I have mostly done mechanical drawings bu... Read more

I have been drawing in 2d CAD (Autocad) since 2000. I started drawing in Solidworks 2007. I have done a lot of reverse engineering, Converting 2d files to 3d. I have mostly done mechanical drawings but I have in the past year gotten into Architectural as well. I work full time at CCS Image group in Cumming Ga. I have a access to both Solidworks 2017 and 2018 and Autocad 2016 and 2017. Thanks you for your time. I look forward to working with you. Thanks James